100% Latest & Updated Fortinet NSE4_FGT_AD-7.6 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!
Question 120
An exception must allow one backup host without broadening an entire subnet's access. How should the address condition be set?
- Inspect first-match conditions and policy order using the actual session tuple.
- Create a host-specific source address object in a narrowly scoped allow policy.
- The traffic is denied by the implicit deny at the end of the policy list.
- Assign the appropriate time schedule to the relevant firewall policy.
Explanation
Correct Answer
B:A /32 source match reduces the exception to the intended device.
Incorrect Answers
A:Source, destination, service, schedule, users and interfaces determine which policy matches first; a /32 source match reduces the exception to the intended device.
C:Unmatched transit sessions do not receive an automatic permit. That distinction matters here because a /32 source match reduces the exception to the intended device.
D:A policy schedule limits when the rule can authorize otherwise matching traffic. For the condition in the stem, the necessary distinction is: A /32 source match reduces the exception to the intended device.
Question 121
An engineer reads an allow rule with `srcintf=dmz`, `dstintf=lan`, but the new TCP SYN actually enters LAN and targets a DMZ host. What directional policy change is required?
- Use an address group containing the approved individual destination addresses.
- Reverse the policy interface pair so incoming LAN and outgoing DMZ match the forward session.
- Match the firewall service protocol and destination port to the actual UDP session.
- Verify the destination address object resolves to the current server IP and is used by the matching policy.
Explanation
Correct Answer
B:Firewall policy interface direction follows the session's first packet and route outcome.
Incorrect Answers
A:Address groups centralize reusable source/destination matching without using an unrestricted all-address rule, whereas firewall policy interface direction follows the session's first packet and route outcome.
C:TCP and UDP transport selectors are not interchangeable merely because the numeric port matches. For the condition in the stem, the necessary distinction is: Firewall policy interface direction follows the session's first packet and route outcome.
D:An FQDN-derived address object must track effective addresses before a policy can match them. Firewall policy interface direction follows the session's first packet and route outcome.
Question 122
A VPN tunnel comes up but site-to-site traffic lacks an allow policy. What additional policy is needed?
- Create suitable policies referencing the IPsec tunnel interface and destination network.
- Reverse the policy interface pair so incoming LAN and outgoing DMZ match the forward session.
- Verify the destination address object resolves to the current server IP and is used by the matching policy.
- Match the firewall service protocol and destination port to the actual UDP session.
Explanation
Correct Answer
A:Tunnel negotiation does not automatically permit application traffic through a forwarding policy.
Incorrect Answers
B:Firewall policy interface direction follows the session's first packet and route outcome. For the condition in the stem, the necessary distinction is: Tunnel negotiation does not automatically permit application traffic through a forwarding policy.
C:An FQDN-derived address object must track effective addresses before a policy can match them. Tunnel negotiation does not automatically permit application traffic through a forwarding policy.
D:TCP and UDP transport selectors are not interchangeable merely because the numeric port matches; tunnel negotiation does not automatically permit application traffic through a forwarding policy.
Question 123
An operator groups several servers into one reusable policy destination. Which object improves maintainability?
- Verify the destination address object resolves to the current server IP and is used by the matching policy.
- Reverse the policy interface pair so incoming LAN and outgoing DMZ match the forward session.
- Use an address group containing the approved individual destination addresses.
- Create suitable policies referencing the IPsec tunnel interface and destination network.
Explanation
Correct Answer
C:Address groups centralize reusable source/destination matching without using an unrestricted all-address rule.
Incorrect Answers
A:An FQDN-derived address object must track effective addresses before a policy can match them. For the condition in the stem, the necessary distinction is: Address groups centralize reusable source/destination matching without using an unrestricted all-address rule.
B:Firewall policy interface direction follows the session's first packet and route outcome. Address groups centralize reusable source/destination matching without using an unrestricted all-address rule.
D:Tunnel negotiation does not automatically permit application traffic through a forwarding policy, whereas address groups centralize reusable source/destination matching without using an unrestricted all-address rule.
Question 124
A policy service object explicitly allows `TCP/443`, but captures show the application uses `UDP/443`. Which service selector is missing?
- Match the firewall service protocol and destination port to the actual UDP session.
- Use an address group containing the approved individual destination addresses.
- Create suitable policies referencing the IPsec tunnel interface and destination network.
- Reverse the policy interface pair so incoming LAN and outgoing DMZ match the forward session.
Explanation
Correct Answer
A:TCP and UDP transport selectors are not interchangeable merely because the numeric port matches.
Incorrect Answers
B:Address groups centralize reusable source/destination matching without using an unrestricted all-address rule; tCP and UDP transport selectors are not interchangeable merely because the numeric port matches.
C:Tunnel negotiation does not automatically permit application traffic through a forwarding policy, whereas tCP and UDP transport selectors are not interchangeable merely because the numeric port matches.
D:Firewall policy interface direction follows the session's first packet and route outcome. That distinction matters here because tCP and UDP transport selectors are not interchangeable merely because the numeric port matches.
Question 125
Users in one VLAN need management access to a server on another, but the firewall policy references only a hostname object with changing resolution. What should be validated?
- Verify the destination address object resolves to the current server IP and is used by the matching policy.
- Use an address group containing the approved individual destination addresses.
- Match the firewall service protocol and destination port to the actual UDP session.
- Create suitable policies referencing the IPsec tunnel interface and destination network.
Explanation
Correct Answer
A:An FQDN-derived address object must track effective addresses before a policy can match them.
Incorrect Answers
B:Address groups centralize reusable source/destination matching without using an unrestricted all-address rule, whereas an FQDN-derived address object must track effective addresses before a policy can match them.
C:TCP and UDP transport selectors are not interchangeable merely because the numeric port matches. That distinction matters here because an FQDN-derived address object must track effective addresses before a policy can match them.
D:Tunnel negotiation does not automatically permit application traffic through a forwarding policy. For the condition in the stem, the necessary distinction is: An FQDN-derived address object must track effective addresses before a policy can match them.
Question 126
An existing allowed session persists briefly after its policy is tightened. Why might new-policy behavior differ from the live connection?
- Examine established session state and re-evaluation behavior before blaming policy order.
- Enable security-profile inspection on the accepting policy and assign the intended AV profile.
- Configure Central SNAT policies because policy-based NGFW always uses central NAT.
- Use supported application and URL category matches directly in policy-based NGFW rules.
Explanation
Correct Answer
A:Existing flow state may retain previously determined policy and NAT processing.
Incorrect Answers
B:Allowing transport traffic alone does not apply antivirus scanning. That distinction matters here because existing flow state may retain previously determined policy and NAT processing.
C:The NGFW policy mode changes where source-NAT decisions are defined. For the condition in the stem, the necessary distinction is: Existing flow state may retain previously determined policy and NAT processing.
D:Policy-based NGFW uses these classification criteria in rules rather than requiring traditional profile attachment. Existing flow state may retain previously determined policy and NAT processing.
Question 127
A security team attaches a proxy-only web profile to a policy using flow inspection. What must be aligned?
- Configure Central SNAT policies because policy-based NGFW always uses central NAT.
- Examine established session state and re-evaluation behavior before blaming policy order.
- Use supported application and URL category matches directly in policy-based NGFW rules.
- Use a web-filter profile feature set compatible with the firewall policy's inspection mode.
Explanation
Correct Answer
D:Flow and proxy profile feature sets must match their corresponding policy inspection mode.
Incorrect Answers
A:The NGFW policy mode changes where source-NAT decisions are defined. That distinction matters here because flow and proxy profile feature sets must match their corresponding policy inspection mode.
B:Existing flow state may retain previously determined policy and NAT processing. For the condition in the stem, the necessary distinction is: Flow and proxy profile feature sets must match their corresponding policy inspection mode.
C:Policy-based NGFW uses these classification criteria in rules rather than requiring traditional profile attachment. Flow and proxy profile feature sets must match their corresponding policy inspection mode.
Question 128
A profile-based NGFW policy permits HTTPS but malware scanning never occurs. Which prerequisite is missing?
- Use a web-filter profile feature set compatible with the firewall policy's inspection mode.
- Enable security-profile inspection on the accepting policy and assign the intended AV profile.
- Examine established session state and re-evaluation behavior before blaming policy order.
- Configure Central SNAT policies because policy-based NGFW always uses central NAT.
Explanation
Correct Answer
B:Allowing transport traffic alone does not apply antivirus scanning.
Incorrect Answers
A:Flow and proxy profile feature sets must match their corresponding policy inspection mode. For the condition in the stem, the necessary distinction is: Allowing transport traffic alone does not apply antivirus scanning.
C:Existing flow state may retain previously determined policy and NAT processing; allowing transport traffic alone does not apply antivirus scanning.
D:The NGFW policy mode changes where source-NAT decisions are defined, whereas allowing transport traffic alone does not apply antivirus scanning.
Question 129
An organization switches to policy-based NGFW mode and wants URL categories in policies. How is the control represented?
- Use a web-filter profile feature set compatible with the firewall policy's inspection mode.
- Examine established session state and re-evaluation behavior before blaming policy order.
- Enable security-profile inspection on the accepting policy and assign the intended AV profile.
- Use supported application and URL category matches directly in policy-based NGFW rules.
Explanation
Correct Answer
D:Policy-based NGFW uses these classification criteria in rules rather than requiring traditional profile attachment.
Incorrect Answers
A:Flow and proxy profile feature sets must match their corresponding policy inspection mode. Policy-based NGFW uses these classification criteria in rules rather than requiring traditional profile attachment.
B:Existing flow state may retain previously determined policy and NAT processing; policy-based NGFW uses these classification criteria in rules rather than requiring traditional profile attachment.
C:Allowing transport traffic alone does not apply antivirus scanning, whereas policy-based NGFW uses these classification criteria in rules rather than requiring traditional profile attachment.
Question 130
A policy-based NGFW deployment expects per-policy NAT but no egress source translations occur. What mandatory arrangement applies?
- Configure Central SNAT policies because policy-based NGFW always uses central NAT.
- Use a web-filter profile feature set compatible with the firewall policy's inspection mode.
- Enable security-profile inspection on the accepting policy and assign the intended AV profile.
- Use supported application and URL category matches directly in policy-based NGFW rules.
Explanation
Correct Answer
A:The NGFW policy mode changes where source-NAT decisions are defined.
Incorrect Answers
B:Flow and proxy profile feature sets must match their corresponding policy inspection mode, whereas the NGFW policy mode changes where source-NAT decisions are defined.
C:Allowing transport traffic alone does not apply antivirus scanning. That distinction matters here because the NGFW policy mode changes where source-NAT decisions are defined.
D:Policy-based NGFW uses these classification criteria in rules rather than requiring traditional profile attachment. For the condition in the stem, the necessary distinction is: The NGFW policy mode changes where source-NAT decisions are defined.
Fortinet NSE 4 - FortiOS 7.6 Administrator (NSE4_FGT_AD-7.6) Practice Tests