100% Latest & Updated Fortinet NSE4_FGT_AD-7.6 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!
Question 150
An administrator wants to restrict access to the firewall's routing protocols or management ports without changing application flows. Which policy family applies?
- Treat the VIP-translated connection as transit traffic governed by a suitable firewall policy.
- Review PING administrative access on the target LAN interface and applicable local-in restrictions.
- Apply appropriately scoped local-in controls rather than broad forwarding-policy changes.
- Use FortiGate local-in management restrictions for traffic terminating on the appliance.
Explanation
Correct Answer
C:Local-in filtering protects appliance-terminating traffic while transit policies govern through-traffic.
Incorrect Answers
A:DNAT to an internal server does not make that connection a management session to FortiGate; local-in filtering protects appliance-terminating traffic while transit policies govern through-traffic.
B:Traffic to the firewall's interface address requires local service eligibility, whereas local-in filtering protects appliance-terminating traffic while transit policies govern through-traffic.
D:Local-in traffic is not equivalent to sessions forwarded between interfaces. For the condition in the stem, the necessary distinction is: Local-in filtering protects appliance-terminating traffic while transit policies govern through-traffic.
Question 151
A FortiGate in profile-based NGFW NAT mode has an Internet egress policy whose NAT toggle is disabled. Packet captures show RFC1918 client source addresses leaving WAN. Which firewall-policy setting must be enabled?
- Use port address translation with distinct translated source ports.
- Inspect the policy's source-NAT address selection and the active route/interface.
- Use an IP pool with the approved translated addresses.
- Enable appropriate source NAT on the outbound firewall policy.
Explanation
Correct Answer
D:SNAT replaces unrouteable inside source addresses with Internet-reachable addresses.
Incorrect Answers
A:PAT multiplexes many internal sessions onto an address by tracking port tuples, whereas sNAT replaces unrouteable inside source addresses with Internet-reachable addresses.
B:Selected egress and chosen address pool determine the translated source presented externally. That distinction matters here because sNAT replaces unrouteable inside source addresses with Internet-reachable addresses.
C:An IP pool controls the public source addresses assigned to matching egress sessions. For the condition in the stem, the necessary distinction is: SNAT replaces unrouteable inside source addresses with Internet-reachable addresses.
Question 152
An egress policy should translate all connections to the selected WAN interface address. What source choice fits?
- Enable appropriate source NAT on the outbound firewall policy.
- Use the outgoing-interface address as the source-NAT translation address.
- Inspect the policy's source-NAT address selection and the active route/interface.
- Use port address translation with distinct translated source ports.
Explanation
Correct Answer
B:Interface-address SNAT follows the egress interface rather than a separate fixed pool.
Incorrect Answers
A:SNAT replaces unrouteable inside source addresses with Internet-reachable addresses. That distinction matters here because interface-address SNAT follows the egress interface rather than a separate fixed pool.
C:Selected egress and chosen address pool determine the translated source presented externally. Interface-address SNAT follows the egress interface rather than a separate fixed pool.
D:PAT multiplexes many internal sessions onto an address by tracking port tuples; interface-address SNAT follows the egress interface rather than a separate fixed pool.
Question 153
A provider allocates a dedicated public IP block for a business application's egress. Which FortiGate object fits?
- Use an IP pool with the approved translated addresses.
- Inspect the policy's source-NAT address selection and the active route/interface.
- Enable appropriate source NAT on the outbound firewall policy.
- Use the outgoing-interface address as the source-NAT translation address.
Explanation
Correct Answer
A:An IP pool controls the public source addresses assigned to matching egress sessions.
Incorrect Answers
B:Selected egress and chosen address pool determine the translated source presented externally. An IP pool controls the public source addresses assigned to matching egress sessions.
C:SNAT replaces unrouteable inside source addresses with Internet-reachable addresses; an IP pool controls the public source addresses assigned to matching egress sessions.
D:Interface-address SNAT follows the egress interface rather than a separate fixed pool, whereas an IP pool controls the public source addresses assigned to matching egress sessions.
Question 154
Two users on the same private IP must share one public address with unique translated ports. What NAT behavior makes this possible?
- Use the outgoing-interface address as the source-NAT translation address.
- Use port address translation with distinct translated source ports.
- Enable appropriate source NAT on the outbound firewall policy.
- Use an IP pool with the approved translated addresses.
Explanation
Correct Answer
B:PAT multiplexes many internal sessions onto an address by tracking port tuples.
Incorrect Answers
A:Interface-address SNAT follows the egress interface rather than a separate fixed pool. PAT multiplexes many internal sessions onto an address by tracking port tuples.
C:SNAT replaces unrouteable inside source addresses with Internet-reachable addresses, whereas pAT multiplexes many internal sessions onto an address by tracking port tuples.
D:An IP pool controls the public source addresses assigned to matching egress sessions. That distinction matters here because pAT multiplexes many internal sessions onto an address by tracking port tuples.
Question 155
A website sees an unexpected NAT IP after the organization changes the outgoing WAN. What should be verified?
- Use an IP pool with the approved translated addresses.
- Use the outgoing-interface address as the source-NAT translation address.
- Inspect the policy's source-NAT address selection and the active route/interface.
- Use port address translation with distinct translated source ports.
Explanation
Correct Answer
C:Selected egress and chosen address pool determine the translated source presented externally.
Incorrect Answers
A:An IP pool controls the public source addresses assigned to matching egress sessions; selected egress and chosen address pool determine the translated source presented externally.
B:Interface-address SNAT follows the egress interface rather than a separate fixed pool, whereas selected egress and chosen address pool determine the translated source presented externally.
D:PAT multiplexes many internal sessions onto an address by tracking port tuples. For the condition in the stem, the necessary distinction is: Selected egress and chosen address pool determine the translated source presented externally.
Question 156
An external client opens `198.51.100.40:443`; the private DMZ server listens on `10.60.0.20:443`. Which FortiGate object implements that destination mapping?
- Configure VIP port forwarding from external TCP/8443 to mapped TCP/443.
- Group appropriate VIP objects in a VIP group referenced by the firewall rule.
- Create a VIP mapping the public address and required service to the inside server.
- Bind the VIP external IP to the intended public service address and matching interface scope.
Explanation
Correct Answer
C:A virtual IP is FortiGate's DNAT representation for publishing internal destinations.
Incorrect Answers
A:Port-forward DNAT translates the destination service port as well as the address, whereas a virtual IP is FortiGate's DNAT representation for publishing internal destinations.
B:VIP groups collect related destination translations without exposing all destinations indiscriminately. That distinction matters here because a virtual IP is FortiGate's DNAT representation for publishing internal destinations.
D:A DNAT mapping must match the actual destination address and ingress arrangement. A virtual IP is FortiGate's DNAT representation for publishing internal destinations.
Question 157
A VIP exists but external clients cannot connect through it. What additional enforcement is required?
- Group appropriate VIP objects in a VIP group referenced by the firewall rule.
- Create a VIP mapping the public address and required service to the inside server.
- Create an accepting WAN-to-DMZ firewall policy referencing the VIP as destination.
- Bind the VIP external IP to the intended public service address and matching interface scope.
Explanation
Correct Answer
C:A destination translation object alone does not authorize transit traffic.
Incorrect Answers
A:VIP groups collect related destination translations without exposing all destinations indiscriminately. That distinction matters here because a destination translation object alone does not authorize transit traffic.
B:A virtual IP is FortiGate's DNAT representation for publishing internal destinations. For the condition in the stem, the necessary distinction is: A destination translation object alone does not authorize transit traffic.
D:A DNAT mapping must match the actual destination address and ingress arrangement; a destination translation object alone does not authorize transit traffic.
Question 158
A DNAT VIP is defined for external TCP/8443 to internal TCP/443, but connections arrive on 8443 and fail before reaching the server. What VIP mapping feature is required?
- Create a VIP mapping the public address and required service to the inside server.
- Group appropriate VIP objects in a VIP group referenced by the firewall rule.
- Create an accepting WAN-to-DMZ firewall policy referencing the VIP as destination.
- Configure VIP port forwarding from external TCP/8443 to mapped TCP/443.
Explanation
Correct Answer
D:Port-forward DNAT translates the destination service port as well as the address.
Incorrect Answers
A:A virtual IP is FortiGate's DNAT representation for publishing internal destinations. For the condition in the stem, the necessary distinction is: Port-forward DNAT translates the destination service port as well as the address.
B:VIP groups collect related destination translations without exposing all destinations indiscriminately. Port-forward DNAT translates the destination service port as well as the address.
C:A destination translation object alone does not authorize transit traffic; port-forward DNAT translates the destination service port as well as the address.
Question 159
A public server is available only on one IP among several interface addresses. What should the VIP match?
- Bind the VIP external IP to the intended public service address and matching interface scope.
- Create a VIP mapping the public address and required service to the inside server.
- Configure VIP port forwarding from external TCP/8443 to mapped TCP/443.
- Create an accepting WAN-to-DMZ firewall policy referencing the VIP as destination.
Explanation
Correct Answer
A:A DNAT mapping must match the actual destination address and ingress arrangement.
Incorrect Answers
B:A virtual IP is FortiGate's DNAT representation for publishing internal destinations; a DNAT mapping must match the actual destination address and ingress arrangement.
C:Port-forward DNAT translates the destination service port as well as the address, whereas a DNAT mapping must match the actual destination address and ingress arrangement.
D:A destination translation object alone does not authorize transit traffic. That distinction matters here because a DNAT mapping must match the actual destination address and ingress arrangement.
Question 160
Several public addresses must map to separate private servers using one policy concept. What should the admin use?
- Create an accepting WAN-to-DMZ firewall policy referencing the VIP as destination.
- Bind the VIP external IP to the intended public service address and matching interface scope.
- Configure VIP port forwarding from external TCP/8443 to mapped TCP/443.
- Group appropriate VIP objects in a VIP group referenced by the firewall rule.
Explanation
Correct Answer
D:VIP groups collect related destination translations without exposing all destinations indiscriminately.
Incorrect Answers
A:A destination translation object alone does not authorize transit traffic; vIP groups collect related destination translations without exposing all destinations indiscriminately.
B:A DNAT mapping must match the actual destination address and ingress arrangement, whereas vIP groups collect related destination translations without exposing all destinations indiscriminately.
C:Port-forward DNAT translates the destination service port as well as the address. That distinction matters here because vIP groups collect related destination translations without exposing all destinations indiscriminately.
Fortinet NSE 4 - FortiOS 7.6 Administrator (NSE4_FGT_AD-7.6) Practice Tests