Fortinet NSE4_FGT_AD-7.6 Exam Dumps, Practice Test Questions

100% Latest & Updated Fortinet NSE4_FGT_AD-7.6 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!

Fortinet NSE4_FGT_AD-7.6  Premium File
$54.99
$49.99

NSE4_FGT_AD-7.6 Premium File

  • Premium File: 94 Questions & Answers. Last update: Nov 21, 2026
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates

NSE4_FGT_AD-7.6 Premium File

Fortinet NSE4_FGT_AD-7.6  Premium File
  • Premium File: 94 Questions & Answers. Last update: Nov 21, 2026
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates
$54.99
$49.99

Fortinet NSE4_FGT_AD-7.6 Practice Test 49

Question 480

A redundant tunnel uses two WANs but firewall policies match only one tunnel interface. What is missing?

  1. Express explicit path preference and health-based failover rather than relying on equal-cost routing.
  2. Add authorized backup-interface policy coverage with equivalent necessary restrictions.
  3. Apply performance SLAs to overlay members and use an appropriate voice steering rule.
  4. Ensure the destination prefix is reachable through the selected backup IPsec interface.

Explanation

Correct Answer

B:

Failover traffic can be denied if the alternate tunnel interface has no matching forward policy.

Incorrect Answers

A:

Equal-cost forwarding can distribute sessions, not guarantee preferred-primary behavior; failover traffic can be denied if the alternate tunnel interface has no matching forward policy.

C:

Encrypted tunnel availability alone does not establish acceptable application path quality. That distinction matters here because failover traffic can be denied if the alternate tunnel interface has no matching forward policy.

D:

Tunnel establishment is insufficient if routing does not select it for the destination. For the condition in the stem, the necessary distinction is: Failover traffic can be denied if the alternate tunnel interface has no matching forward policy.

Question 481

A branch requires true Internet-provider resilience for an IPsec connection to headquarters. The design currently has two tunnels but both depend on ISP A, and route preference never moves after failure. Choose THREE improvements.

  1. Configure route or SD-WAN steering to select the working tunnel when the primary path fails.
  2. Provide an alternate tunnel path using genuinely independent ISP B underlay reachability.
  3. Monitor the primary tunnel and its peer health to trigger appropriate failover.
  4. Monitor only Ethernet carrier and ignore loss of the remote IPsec endpoint.
  5. Use two public IPs on ISP A for separate tunnels but no independent ISP B path.
  6. Create the secondary tunnel via ISP B but never connect route preference to link or tunnel health.

Explanation

Correct Answers

A:

VPN redundancy must include a forwarding decision that can move traffic.

B:

Both tunnels must not share the very WAN dependency they are meant to survive.

C:

Health detection prevents traffic from remaining pinned to a nonfunctional primary path.

Incorrect Answers

D:

The link can remain up while the peer or overlay is unreachable.

E:

Both still share the same upstream provider failure domain.

F:

The new path exists yet forwarding can remain on failed ISP A.

Question 482

`diagnose vpn ike gateway list` shows an established IKE peer, but protected traffic does not pass. Which command gives child-SA and selector detail?

  1. Use `get vpn ipsec tunnel summary` and related tunnel status commands.
  2. Use `diagnose vpn ike gateway list` for IKE gateway state.
  3. Disable debug and clear temporary debug filters after collecting the needed evidence.
  4. Inspect `diagnose vpn tunnel list` and its phase 2 selectors and counters.

Explanation

Correct Answer

D:

The tunnel list exposes child SA traffic state beyond the initial IKE gateway.

Incorrect Answers

A:

The summary view helps identify established versus failed tunnels efficiently. That distinction matters here because the tunnel list exposes child SA traffic state beyond the initial IKE gateway.

B:

The IKE gateway list reports phase 1 negotiation information. For the condition in the stem, the necessary distinction is: The tunnel list exposes child SA traffic state beyond the initial IKE gateway.

C:

Persistent debugging creates overhead and noisy logs beyond the investigation window. The tunnel list exposes child SA traffic state beyond the initial IKE gateway.

Question 483

An IKE handshake repeatedly fails and the phase mismatch is unclear. What diagnostic sequence helps?

  1. Use filtered `diagnose debug application ike -1` during a bounded handshake attempt.
  2. Use `diagnose vpn ike gateway list` for IKE gateway state.
  3. Disable debug and clear temporary debug filters after collecting the needed evidence.
  4. Inspect `diagnose vpn tunnel list` and its phase 2 selectors and counters.

Explanation

Correct Answer

A:

IKE daemon debug reveals negotiation failure details when scoped appropriately.

Incorrect Answers

B:

The IKE gateway list reports phase 1 negotiation information. IKE daemon debug reveals negotiation failure details when scoped appropriately.

C:

Persistent debugging creates overhead and noisy logs beyond the investigation window; iKE daemon debug reveals negotiation failure details when scoped appropriately.

D:

The tunnel list exposes child SA traffic state beyond the initial IKE gateway, whereas iKE daemon debug reveals negotiation failure details when scoped appropriately.

Question 484

The engineer knows a tunnel name and wants to check summary state across many peers. Which command family applies?

  1. Use filtered `diagnose debug application ike -1` during a bounded handshake attempt.
  2. Inspect `diagnose vpn tunnel list` and its phase 2 selectors and counters.
  3. Use `diagnose vpn ike gateway list` for IKE gateway state.
  4. Use `get vpn ipsec tunnel summary` and related tunnel status commands.

Explanation

Correct Answer

D:

The summary view helps identify established versus failed tunnels efficiently.

Incorrect Answers

A:

IKE daemon debug reveals negotiation failure details when scoped appropriately. The summary view helps identify established versus failed tunnels efficiently.

B:

The tunnel list exposes child SA traffic state beyond the initial IKE gateway; the summary view helps identify established versus failed tunnels efficiently.

C:

The IKE gateway list reports phase 1 negotiation information, whereas the summary view helps identify established versus failed tunnels efficiently.

Question 485

An administrator leaves verbose IKE debugging enabled after the incident. What should be done?

  1. Disable debug and clear temporary debug filters after collecting the needed evidence.
  2. Inspect `diagnose vpn tunnel list` and its phase 2 selectors and counters.
  3. Use filtered `diagnose debug application ike -1` during a bounded handshake attempt.
  4. Use `get vpn ipsec tunnel summary` and related tunnel status commands.

Explanation

Correct Answer

A:

Persistent debugging creates overhead and noisy logs beyond the investigation window.

Incorrect Answers

B:

The tunnel list exposes child SA traffic state beyond the initial IKE gateway, whereas persistent debugging creates overhead and noisy logs beyond the investigation window.

C:

IKE daemon debug reveals negotiation failure details when scoped appropriately. That distinction matters here because persistent debugging creates overhead and noisy logs beyond the investigation window.

D:

The summary view helps identify established versus failed tunnels efficiently. For the condition in the stem, the necessary distinction is: Persistent debugging creates overhead and noisy logs beyond the investigation window.

Question 486

IKE logs show proposal mismatch before authentication. What should be corrected?

  1. Compare the configured phase 1 cryptographic proposals and DH groups on both peers.
  2. Verify DPD and controlled phase 1 re-negotiation behavior during the outage.
  3. Validate phase 2 selectors, PFS and ESP proposal agreement.
  4. Permit the required NAT-T UDP transport between authenticated VPN peers.

Explanation

Correct Answer

A:

No mutually accepted proposal prevents IKE SA creation.

Incorrect Answers

B:

Dead peer recognition is needed to replace unusable security associations. That distinction matters here because no mutually accepted proposal prevents IKE SA creation.

C:

Phase 2 failure occurs after phase 1 and needs its own parameter comparison. For the condition in the stem, the necessary distinction is: No mutually accepted proposal prevents IKE SA creation.

D:

NAT traversal cannot work when its encapsulated UDP packets are blocked in transit. No mutually accepted proposal prevents IKE SA creation.

Question 487

IKE logs show peer identity mismatch despite matching algorithms. Which field is central?

  1. Compare the configured phase 1 cryptographic proposals and DH groups on both peers.
  2. Verify DPD and controlled phase 1 re-negotiation behavior during the outage.
  3. Verify configured local and remote IKE peer identities or certificate subject matches.
  4. Permit the required NAT-T UDP transport between authenticated VPN peers.

Explanation

Correct Answer

C:

Successful cryptographic negotiation does not override an unexpected peer identity.

Incorrect Answers

A:

No mutually accepted proposal prevents IKE SA creation. That distinction matters here because successful cryptographic negotiation does not override an unexpected peer identity.

B:

Dead peer recognition is needed to replace unusable security associations. For the condition in the stem, the necessary distinction is: Successful cryptographic negotiation does not override an unexpected peer identity.

D:

NAT traversal cannot work when its encapsulated UDP packets are blocked in transit; successful cryptographic negotiation does not override an unexpected peer identity.

Question 488

Phase 1 is established, but quick mode or child-SA negotiation fails. Which configuration set needs attention?

  1. Verify DPD and controlled phase 1 re-negotiation behavior during the outage.
  2. Verify configured local and remote IKE peer identities or certificate subject matches.
  3. Compare the configured phase 1 cryptographic proposals and DH groups on both peers.
  4. Validate phase 2 selectors, PFS and ESP proposal agreement.

Explanation

Correct Answer

D:

Phase 2 failure occurs after phase 1 and needs its own parameter comparison.

Incorrect Answers

A:

Dead peer recognition is needed to replace unusable security associations. For the condition in the stem, the necessary distinction is: Phase 2 failure occurs after phase 1 and needs its own parameter comparison.

B:

Successful cryptographic negotiation does not override an unexpected peer identity. Phase 2 failure occurs after phase 1 and needs its own parameter comparison.

C:

No mutually accepted proposal prevents IKE SA creation; phase 2 failure occurs after phase 1 and needs its own parameter comparison.

Question 489

A VPN behind NAT uses UDP/4500 but the firewall upstream silently blocks the packets. What should be opened?

  1. Compare the configured phase 1 cryptographic proposals and DH groups on both peers.
  2. Permit the required NAT-T UDP transport between authenticated VPN peers.
  3. Validate phase 2 selectors, PFS and ESP proposal agreement.
  4. Verify configured local and remote IKE peer identities or certificate subject matches.

Explanation

Correct Answer

B:

NAT traversal cannot work when its encapsulated UDP packets are blocked in transit.

Incorrect Answers

A:

No mutually accepted proposal prevents IKE SA creation. NAT traversal cannot work when its encapsulated UDP packets are blocked in transit.

C:

Phase 2 failure occurs after phase 1 and needs its own parameter comparison, whereas nAT traversal cannot work when its encapsulated UDP packets are blocked in transit.

D:

Successful cryptographic negotiation does not override an unexpected peer identity. That distinction matters here because nAT traversal cannot work when its encapsulated UDP packets are blocked in transit.

Question 490

An intermittent tunnel cannot be reestablished after an ISP flap because stale peer state persists. What should be tested?

  1. Verify configured local and remote IKE peer identities or certificate subject matches.
  2. Verify DPD and controlled phase 1 re-negotiation behavior during the outage.
  3. Validate phase 2 selectors, PFS and ESP proposal agreement.
  4. Permit the required NAT-T UDP transport between authenticated VPN peers.

Explanation

Correct Answer

B:

Dead peer recognition is needed to replace unusable security associations.

Incorrect Answers

A:

Successful cryptographic negotiation does not override an unexpected peer identity; dead peer recognition is needed to replace unusable security associations.

C:

Phase 2 failure occurs after phase 1 and needs its own parameter comparison. That distinction matters here because dead peer recognition is needed to replace unusable security associations.

D:

NAT traversal cannot work when its encapsulated UDP packets are blocked in transit. For the condition in the stem, the necessary distinction is: Dead peer recognition is needed to replace unusable security associations.

Fortinet NSE 4 - FortiOS 7.6 Administrator (NSE4_FGT_AD-7.6) Practice Tests

UP

SPECIAL OFFER: GET 10% OFF

This is ONE TIME OFFER

ExamSnap Discount Offer
Enter Your Email Address to Receive Your 10% Off Discount Code

A confirmation link will be sent to this email address to verify your login. *We value your privacy. We will not rent or sell your email address.

Download Free Demo of VCE Exam Simulator

Experience Avanset VCE Exam Simulator for yourself.

Simply submit your e-mail address below to get started with our interactive software demo of your free trial.

Free Demo Limits: In the demo version you will be able to access only first 5 questions from exam.