100% Latest & Updated Fortinet NSE7_SSE_AR-26 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!
Question 640
Select THREE correct elements of a safe remedy-and-evidence plan for the Asymmetric routing across SASE and SD-WAN case. Following a production change affecting Stonebridge Markets in its western region, a network team receives repeatable user-impact reports. Its fault evidence is: Private-app requests arrive through an SPA hub but replies follow public DIA, causing session drops. Unrelated services are still operating, so the immediate response must isolate the failing control for the designated privileged users without disabling unrelated protections.
- Capture both request and response paths and verify a stable stateful session after routing correction.
- Make return-route and firewall session symmetry consistent with the documented hub-and-spoke SPA design.
- Remote users retain secure private access through the approved secondary hub.
- Model FortiSASE PoPs as spokes via the documented SPA IPsec/BGP integration with its FortiGate hubs.
- Send traffic from an agentless branch host and check the edge-to-PoP transport and applied SIA security policy.
- Both directions traverse compatible secure paths and private sessions complete.
Explanation
Correct Answers
A:Correct verification element: Capture both request and response paths and verify a stable stateful session after routing correction. This independently measures whether the intended change works. [Case R161-C128; Fortinet task I3; anchors EXAM, SASE_SPA, SPA_ARCH.] [Question R161-Q0640.]
B:Correct remediation element: Make return-route and firewall session symmetry consistent with the documented hub-and-spoke SPA design. It addresses A mismatched return path breaks stateful access despite successful forward routing. [Case R161-C128; Fortinet task I3; anchors EXAM, SASE_SPA, SPA_ARCH.] [Question R161-Q0640.]
F:Both directions traverse compatible secure paths and private sessions complete. This confirms the case-specific path or security boundary.
Incorrect Answers
C:That intervention addresses Dual-hub SPA resilience: A remote-user SPA design has two datacenters but only the primary hub is associated with the SASE integration. The case-specific requirement is: Both directions traverse compatible secure paths and private sessions complete. Verify it with: Capture both request and response paths and verify a stable stateful session after routing correction.
D:Incorrect for this case: Model FortiSASE PoPs as spokes via the documented SPA IPsec/BGP integration with its FortiGate hubs. concerns the separate issue of FortiSASE as SD-WAN spoke (An enterprise wants SASE PoPs to participate in its existing hub-and-spoke routing rather than build unrelated public paths.). It does not directly establish Make return-route and firewall session symmetry consistent with the documented hub-and-spoke SPA design. The case-specific evidence is Capture both request and response paths and verify a stable stateful session after routing correction. [Case R161-C128; Fortinet task I3; anchors EXAM, SASE_SPA, SPA_ARCH.] [Question R161-Q0640.]
E:Incorrect for this case: Send traffic from an agentless branch host and check the edge-to-PoP transport and applied SIA security policy. concerns the separate issue of Site-based SIA for edge branches (A remote branch has many IoT devices that cannot run individual endpoint agents but need inspected internet access.). It does not directly establish Capture both request and response paths and verify a stable stateful session after routing correction. The case-specific evidence is Capture both request and response paths and verify a stable stateful session after routing correction. [Case R161-C128; Fortinet task I3; anchors EXAM, SASE_SPA, SPA_ARCH.] [Question R161-Q0640.]
Question 641
Which corrective action MOST DIRECTLY addresses the observed Single-hub versus dual-hub SPA design problem within the approved change scope? During a scoped coastal district deployment across a staged branch cohort, Northbank Logistics must commission the planned FortiSASE/SD-WAN control. The operational finding is: An enterprise wants high availability but its FortiSASE integration still uses a single hub endpoint. The change ticket limits modifications to the affected production application and requires a reversible test.
- Configure and test the supported SPA multi-hub design with recovery path and consistent advertised private prefixes.
- Select a supported dual-hub SPA architecture and validate route advertisement and tunnel health for both hubs.
- Use a FortiGate SD-WAN or supported thin-edge LAN-extension path to FortiSASE for site-based SIA.
- Validate the supported FortiAP edge/branch on-ramp deployment model and configure its approved FortiSASE uplink.
Explanation
Correct Answer
B:Correct: An enterprise wants high availability but its FortiSASE integration still uses a single hub endpoint. The targeted remedy is Select a supported dual-hub SPA architecture and validate route advertisement and tunnel health for both hubs. This addresses redundant branch uplinks alone do not remove a single spa hub dependency. Confirm it by: Fail the primary hub and observe PoP-to-secondary route selection and application continuity. [Case R161-C129; Fortinet task I3; anchors EXAM, SASE_SPA, SPA_ARCH.] [Question R161-Q0641.]
Incorrect Answers
A:Incorrect for this case: Configure and test the supported SPA multi-hub design with recovery path and consistent advertised private prefixes. concerns the separate issue of Dual-hub SPA resilience (A remote-user SPA design has two datacenters but only the primary hub is associated with the SASE integration.). It does not directly establish Select a supported dual-hub SPA architecture and validate route advertisement and tunnel health for both hubs. The case-specific evidence is Fail the primary hub and observe PoP-to-secondary route selection and application continuity. [Case R161-C129; Fortinet task I3; anchors EXAM, SASE_SPA, SPA_ARCH.] [Question R161-Q0641.]
C:That intervention addresses Site-based SIA for edge branches: A remote branch has many IoT devices that cannot run individual endpoint agents but need inspected internet access. The case-specific requirement is: Select a supported dual-hub SPA architecture and validate route advertisement and tunnel health for both hubs. Verify it with: Fail the primary hub and observe PoP-to-secondary route selection and application continuity.
D:That intervention addresses Branch FortiAP as SASE edge: An isolated satellite office uses supported FortiAP edge equipment and wants cloud inspection without a local full FortiGate stack. The case-specific requirement is: Select a supported dual-hub SPA architecture and validate route advertisement and tunnel health for both hubs. Verify it with: Fail the primary hub and observe PoP-to-secondary route selection and application continuity.
Question 642
Which independent diagnostic check best validates that the Single-hub versus dual-hub SPA design repair works? During a scoped coastal district deployment across a staged branch cohort, Northbank Logistics must commission the planned FortiSASE/SD-WAN control. The operational finding is: An enterprise wants high availability but its FortiSASE integration still uses a single hub endpoint. The change ticket limits modifications to the affected production application and requires a reversible test.
- Compare on-ramp connectivity and inspected traffic from an appliance behind the branch edge.
- Fail the primary hub and observe PoP-to-secondary route selection and application continuity.
- Compare IPsec SA state and BGP advertisements between a PoP and each configured hub.
- Inspect PoP-side and hub-side learned routes and an end-to-end private-app test.
Explanation
Correct Answer
B:Correct: Fail the primary hub and observe PoP-to-secondary route selection and application continuity. This directly tests the failure mechanism and the required acceptance evidence: A second authorized hub sustains private-app connectivity during a single-hub fault. [Case R161-C129; Fortinet task I3; anchors EXAM, SASE_SPA, SPA_ARCH.] [Question R161-Q0642.]
Incorrect Answers
A:That intervention addresses Site on-ramp for nonagent branch users: A factory branch needs FortiSASE web inspection but its terminals lack FortiClient support. The relevant verification here is: Fail the primary hub and observe PoP-to-secondary route selection and application continuity.
C:That intervention addresses FortiSASE as SD-WAN spoke: An enterprise wants SASE PoPs to participate in its existing hub-and-spoke routing rather than build unrelated public paths. The relevant verification here is: Fail the primary hub and observe PoP-to-secondary route selection and application continuity.
D:That intervention addresses FortiSASE PoP reachability to hub private routes: Remote users authenticate successfully but cannot reach an internal subnet through SPA over SD-WAN. The relevant verification here is: Fail the primary hub and observe PoP-to-secondary route selection and application continuity.
Question 643
What observable result would show that the intended Single-hub versus dual-hub SPA design behavior has been restored? During a scoped coastal district deployment across a staged branch cohort, Northbank Logistics must commission the planned FortiSASE/SD-WAN control. The operational finding is: An enterprise wants high availability but its FortiSASE integration still uses a single hub endpoint. The change ticket limits modifications to the affected production application and requires a reversible test.
- The managed endpoint's internet traffic receives the intended cloud security inspection.
- The allowed users originate from the authorized egress identity without arbitrary source changes.
- A second authorized hub sustains private-app connectivity during a single-hub fault.
- The site gains approved SIA through the configured edge device within its supported feature scope.
Explanation
Correct Answer
C:Correct: A second authorized hub sustains private-app connectivity during a single-hub fault. That result demonstrates the requested controlled repair and avoids the failure mode: Redundant branch uplinks alone do not remove a single SPA hub dependency. [Case R161-C129; Fortinet task I3; anchors EXAM, SASE_SPA, SPA_ARCH.] [Question R161-Q0643.]
Incorrect Answers
A:That intervention addresses Agent-based remote-user secure internet access: Managed laptops require full-tunnel policy enforcement when users browse from unmanaged networks. The case-specific requirement is: A second authorized hub sustains private-app connectivity during a single-hub fault. Verify it with: Fail the primary hub and observe PoP-to-secondary route selection and application continuity.
B:That intervention addresses Dedicated public egress IP requirement: A SaaS vendor permits traffic only from a preapproved public address but users traverse changing cloud egress. The case-specific requirement is: A second authorized hub sustains private-app connectivity during a single-hub fault. Verify it with: Fail the primary hub and observe PoP-to-secondary route selection and application continuity.
D:That intervention addresses Branch FortiAP as SASE edge: An isolated satellite office uses supported FortiAP edge equipment and wants cloud inspection without a local full FortiGate stack. The case-specific requirement is: A second authorized hub sustains private-app connectivity during a single-hub fault. Verify it with: Fail the primary hub and observe PoP-to-secondary route selection and application continuity.
Question 644
Which failure mechanism BEST explains the Single-hub versus dual-hub SPA design observation before a repair is attempted? During a scoped coastal district deployment across a staged branch cohort, Northbank Logistics must commission the planned FortiSASE/SD-WAN control. The operational finding is: An enterprise wants high availability but its FortiSASE integration still uses a single hub endpoint. The change ticket limits modifications to the affected production application and requires a reversible test.
- A single undifferentiated source identity causes access-policy overlap.
- Redundant branch uplinks alone do not remove a single SPA hub dependency.
- A per-user agent tunnel cannot be assumed on unmanaged factory endpoints.
- Treating the access point as an arbitrary full-featured FortiGate substitutes unsupported edge assumptions.
Explanation
Correct Answer
B:Correct: Redundant branch uplinks alone do not remove a single SPA hub dependency. This matches the given observation, unlike defects in unrelated SASE or SD-WAN controls. Verify the diagnosis through: Fail the primary hub and observe PoP-to-secondary route selection and application continuity. [Case R161-C129; Fortinet task I3; anchors EXAM, SASE_SPA, SPA_ARCH.] [Question R161-Q0644.]
Incorrect Answers
A:The Mixed edge and remote-user segmentation diagnosis does not explain the observed case: An enterprise wants high availability but its FortiSASE integration still uses a single hub endpoint. The supported diagnosis is: Redundant branch uplinks alone do not remove a single SPA hub dependency.
C:The Site on-ramp for nonagent branch users diagnosis does not explain the observed case: An enterprise wants high availability but its FortiSASE integration still uses a single hub endpoint. The supported diagnosis is: Redundant branch uplinks alone do not remove a single SPA hub dependency.
D:Incorrect diagnosis: this describes a different operational mechanism (Branch FortiAP as SASE edge), not the documented observation (An enterprise wants high availability but its FortiSASE integration still uses a single hub endpoint.). The supported case diagnosis is Redundant branch uplinks alone do not remove a single SPA hub dependency. [Case R161-C129; Fortinet task I3; anchors EXAM, SASE_SPA, SPA_ARCH.] [Question R161-Q0644.]
Question 645
Select TWO correct elements of a safe remedy-and-evidence plan for the Single-hub versus dual-hub SPA design case. During a scoped coastal district deployment across a staged branch cohort, Northbank Logistics must commission the planned FortiSASE/SD-WAN control. The operational finding is: An enterprise wants high availability but its FortiSASE integration still uses a single hub endpoint. The change ticket limits modifications to the affected production application and requires a reversible test.
- Use a supported dedicated public IP egress capability with validated policy and licensing assumptions.
- Inspect device registration, edge tunnel and an application policy hit from a WLAN client.
- Fail the primary hub and observe PoP-to-secondary route selection and application continuity.
- Select a supported dual-hub SPA architecture and validate route advertisement and tunnel health for both hubs.
- Cloud events arrive securely at the internal collector without public exposure.
Explanation
Correct Answers
C:Correct verification element: Fail the primary hub and observe PoP-to-secondary route selection and application continuity. This independently measures whether the intended change works. [Case R161-C129; Fortinet task I3; anchors EXAM, SASE_SPA, SPA_ARCH.] [Question R161-Q0645.]
D:Correct remediation element: Select a supported dual-hub SPA architecture and validate route advertisement and tunnel health for both hubs. It addresses Redundant branch uplinks alone do not remove a single SPA hub dependency. [Case R161-C129; Fortinet task I3; anchors EXAM, SASE_SPA, SPA_ARCH.] [Question R161-Q0645.]
Incorrect Answers
A:That intervention addresses Dedicated public egress IP requirement: A SaaS vendor permits traffic only from a preapproved public address but users traverse changing cloud egress. The case-specific requirement is: Select a supported dual-hub SPA architecture and validate route advertisement and tunnel health for both hubs. Verify it with: Fail the primary hub and observe PoP-to-secondary route selection and application continuity.
B:That intervention addresses Branch FortiAP as SASE edge: An isolated satellite office uses supported FortiAP edge equipment and wants cloud inspection without a local full FortiGate stack. The relevant verification here is: Fail the primary hub and observe PoP-to-secondary route selection and application continuity.
E:That intervention addresses Private FortiAnalyzer behind SPA: The customer must forward FortiSASE logs to an internal FortiAnalyzer instance accessible only through a private hub. The case-specific requirement is: A second authorized hub sustains private-app connectivity during a single-hub fault. Verify it with: Fail the primary hub and observe PoP-to-secondary route selection and application continuity.
Question 646
Which corrective action MOST DIRECTLY addresses the observed Single-hub versus dual-hub SPA design problem within the approved change scope? Following a production change affecting Seaboard Financial in its metro branch group, a network team receives repeatable user-impact reports. Its fault evidence is: An enterprise wants high availability but its FortiSASE integration still uses a single hub endpoint. Unrelated services are still operating, so the immediate response must isolate the failing control for the cloud PoP and private hub path without disabling unrelated protections.
- Create separate policy identities/scopes for site-based edge sessions and individual remote-user sessions.
- Use the supported FortiClient agent-based SIA mode with the appropriate endpoint profile and FortiSASE security policy.
- Select an SPA architecture using SD-WAN/IPsec overlays that supports private TCP and UDP workloads.
- Select a supported dual-hub SPA architecture and validate route advertisement and tunnel health for both hubs.
Explanation
Correct Answer
D:Correct: An enterprise wants high availability but its FortiSASE integration still uses a single hub endpoint. The targeted remedy is Select a supported dual-hub SPA architecture and validate route advertisement and tunnel health for both hubs. This addresses redundant branch uplinks alone do not remove a single spa hub dependency. Confirm it by: Fail the primary hub and observe PoP-to-secondary route selection and application continuity. [Case R161-C130; Fortinet task I3; anchors EXAM, SASE_SPA, SPA_ARCH.] [Question R161-Q0646.]
Incorrect Answers
A:That intervention addresses Mixed edge and remote-user segmentation: Branch LAN-extension traffic and individual remote-user traffic share FortiSASE but need different access restrictions. The case-specific requirement is: Select a supported dual-hub SPA architecture and validate route advertisement and tunnel health for both hubs. Verify it with: Fail the primary hub and observe PoP-to-secondary route selection and application continuity.
B:That intervention addresses Agent-based remote-user secure internet access: Managed laptops require full-tunnel policy enforcement when users browse from unmanaged networks. The case-specific requirement is: Select a supported dual-hub SPA architecture and validate route advertisement and tunnel health for both hubs. Verify it with: Fail the primary hub and observe PoP-to-secondary route selection and application continuity.
C:That intervention addresses Private TCP and UDP application access: Remote workers need access to a private UDP-dependent application hosted behind an SD-WAN hub. The case-specific requirement is: Select a supported dual-hub SPA architecture and validate route advertisement and tunnel health for both hubs. Verify it with: Fail the primary hub and observe PoP-to-secondary route selection and application continuity.
Question 647
Which independent diagnostic check best validates that the Single-hub versus dual-hub SPA design repair works? Following a production change affecting Seaboard Financial in its metro branch group, a network team receives repeatable user-impact reports. Its fault evidence is: An enterprise wants high availability but its FortiSASE integration still uses a single hub endpoint. Unrelated services are still operating, so the immediate response must isolate the failing control for the cloud PoP and private hub path without disabling unrelated protections.
- Receive a test event on FortiAnalyzer and inspect the private path and FortiSASE forwarding status.
- Fail the primary hub and observe PoP-to-secondary route selection and application continuity.
- Audit who can see each tenant's policies and verify licensed services and PoP assignments separately.
- Validate return-path routing and test both TCP and UDP private-app sessions through a qualified PoP.
Explanation
Correct Answer
B:Correct: Fail the primary hub and observe PoP-to-secondary route selection and application continuity. This directly tests the failure mechanism and the required acceptance evidence: A second authorized hub sustains private-app connectivity during a single-hub fault. [Case R161-C130; Fortinet task I3; anchors EXAM, SASE_SPA, SPA_ARCH.] [Question R161-Q0647.]
Incorrect Answers
A:That intervention addresses Private FortiAnalyzer behind SPA: The customer must forward FortiSASE logs to an internal FortiAnalyzer instance accessible only through a private hub. The relevant verification here is: Fail the primary hub and observe PoP-to-secondary route selection and application continuity.
C:Incorrect for this case: Audit who can see each tenant's policies and verify licensed services and PoP assignments separately. concerns the separate issue of MSSP customer provisioning separation (An MSSP operator is onboarding two customers with different licenses, policies and delegated admins.). It does not directly establish Fail the primary hub and observe PoP-to-secondary route selection and application continuity. The case-specific evidence is Fail the primary hub and observe PoP-to-secondary route selection and application continuity. [Case R161-C130; Fortinet task I3; anchors EXAM, SASE_SPA, SPA_ARCH.] [Question R161-Q0647.]
D:That intervention addresses Private TCP and UDP application access: Remote workers need access to a private UDP-dependent application hosted behind an SD-WAN hub. The relevant verification here is: Fail the primary hub and observe PoP-to-secondary route selection and application continuity.
Question 648
What observable result would show that the intended Single-hub versus dual-hub SPA design behavior has been restored? Following a production change affecting Seaboard Financial in its metro branch group, a network team receives repeatable user-impact reports. Its fault evidence is: An enterprise wants high availability but its FortiSASE integration still uses a single hub endpoint. Unrelated services are still operating, so the immediate response must isolate the failing control for the cloud PoP and private hub path without disabling unrelated protections.
- Security inspection is routed using the allowed geographic scope with documented exceptions.
- A second authorized hub sustains private-app connectivity during a single-hub fault.
- Each customer receives only its subscribed capabilities and delegated administrative boundary.
- Each traffic population receives its appropriate policy without accidental role inheritance.
Explanation
Correct Answer
B:Correct: A second authorized hub sustains private-app connectivity during a single-hub fault. That result demonstrates the requested controlled repair and avoids the failure mode: Redundant branch uplinks alone do not remove a single SPA hub dependency. [Case R161-C130; Fortinet task I3; anchors EXAM, SASE_SPA, SPA_ARCH.] [Question R161-Q0648.]
Incorrect Answers
A:That intervention addresses Sovereign access-point selection: A tenant's security architecture requires traffic inspection to remain within approved geographic PoPs. The case-specific requirement is: A second authorized hub sustains private-app connectivity during a single-hub fault. Verify it with: Fail the primary hub and observe PoP-to-secondary route selection and application continuity.
C:That intervention addresses MSSP customer provisioning separation: An MSSP operator is onboarding two customers with different licenses, policies and delegated admins. The case-specific requirement is: A second authorized hub sustains private-app connectivity during a single-hub fault. Verify it with: Fail the primary hub and observe PoP-to-secondary route selection and application continuity.
D:Incorrect for this case: Each traffic population receives its appropriate policy without accidental role inheritance. concerns the separate issue of Mixed edge and remote-user segmentation (Branch LAN-extension traffic and individual remote-user traffic share FortiSASE but need different access restrictions.). It does not directly establish A second authorized hub sustains private-app connectivity during a single-hub fault. The case-specific evidence is Fail the primary hub and observe PoP-to-secondary route selection and application continuity. [Case R161-C130; Fortinet task I3; anchors EXAM, SASE_SPA, SPA_ARCH.] [Question R161-Q0648.]
Question 649
Which failure mechanism BEST explains the Single-hub versus dual-hub SPA design observation before a repair is attempted? Following a production change affecting Seaboard Financial in its metro branch group, a network team receives repeatable user-impact reports. Its fault evidence is: An enterprise wants high availability but its FortiSASE integration still uses a single hub endpoint. Unrelated services are still operating, so the immediate response must isolate the failing control for the cloud PoP and private hub path without disabling unrelated protections.
- Treating the access point as an arbitrary full-featured FortiGate substitutes unsupported edge assumptions.
- Redundant branch uplinks alone do not remove a single SPA hub dependency.
- A private log endpoint is unreachable using public-only forwarding semantics.
- The cloud SPA connection is a single-hub dependency despite regional redundancy elsewhere.
Explanation
Correct Answer
B:Correct: Redundant branch uplinks alone do not remove a single SPA hub dependency. This matches the given observation, unlike defects in unrelated SASE or SD-WAN controls. Verify the diagnosis through: Fail the primary hub and observe PoP-to-secondary route selection and application continuity. [Case R161-C130; Fortinet task I3; anchors EXAM, SASE_SPA, SPA_ARCH.] [Question R161-Q0649.]
Incorrect Answers
A:Incorrect diagnosis: this describes a different operational mechanism (Branch FortiAP as SASE edge), not the documented observation (An enterprise wants high availability but its FortiSASE integration still uses a single hub endpoint.). The supported case diagnosis is Redundant branch uplinks alone do not remove a single SPA hub dependency. [Case R161-C130; Fortinet task I3; anchors EXAM, SASE_SPA, SPA_ARCH.] [Question R161-Q0649.]
C:The Private FortiAnalyzer behind SPA diagnosis does not explain the observed case: An enterprise wants high availability but its FortiSASE integration still uses a single hub endpoint. The supported diagnosis is: Redundant branch uplinks alone do not remove a single SPA hub dependency.
D:The Dual-hub SPA resilience diagnosis does not explain the observed case: An enterprise wants high availability but its FortiSASE integration still uses a single hub endpoint. The supported diagnosis is: Redundant branch uplinks alone do not remove a single SPA hub dependency.
Question 650
Select THREE correct elements of a safe remedy-and-evidence plan for the Single-hub versus dual-hub SPA design case. Following a production change affecting Seaboard Financial in its metro branch group, a network team receives repeatable user-impact reports. Its fault evidence is: An enterprise wants high availability but its FortiSASE integration still uses a single hub endpoint. Unrelated services are still operating, so the immediate response must isolate the failing control for the cloud PoP and private hub path without disabling unrelated protections.
- Audit who can see each tenant's policies and verify licensed services and PoP assignments separately.
- Select a supported dual-hub SPA architecture and validate route advertisement and tunnel health for both hubs.
- A second authorized hub sustains private-app connectivity during a single-hub fault.
- Configure and test the supported SPA multi-hub design with recovery path and consistent advertised private prefixes.
- Fail the primary hub and observe PoP-to-secondary route selection and application continuity.
- Each traffic population receives its appropriate policy without accidental role inheritance.
Explanation
Correct Answers
B:Correct remediation element: Select a supported dual-hub SPA architecture and validate route advertisement and tunnel health for both hubs. It addresses Redundant branch uplinks alone do not remove a single SPA hub dependency. [Case R161-C130; Fortinet task I3; anchors EXAM, SASE_SPA, SPA_ARCH.] [Question R161-Q0650.]
C:A second authorized hub sustains private-app connectivity during a single-hub fault. This confirms the case-specific path or security boundary.
E:Correct verification element: Fail the primary hub and observe PoP-to-secondary route selection and application continuity. This independently measures whether the intended change works. [Case R161-C130; Fortinet task I3; anchors EXAM, SASE_SPA, SPA_ARCH.] [Question R161-Q0650.]
Incorrect Answers
A:Incorrect for this case: Audit who can see each tenant's policies and verify licensed services and PoP assignments separately. concerns the separate issue of MSSP customer provisioning separation (An MSSP operator is onboarding two customers with different licenses, policies and delegated admins.). It does not directly establish Fail the primary hub and observe PoP-to-secondary route selection and application continuity. The case-specific evidence is Fail the primary hub and observe PoP-to-secondary route selection and application continuity. [Case R161-C130; Fortinet task I3; anchors EXAM, SASE_SPA, SPA_ARCH.] [Question R161-Q0650.]
D:Incorrect for this case: Configure and test the supported SPA multi-hub design with recovery path and consistent advertised private prefixes. concerns the separate issue of Dual-hub SPA resilience (A remote-user SPA design has two datacenters but only the primary hub is associated with the SASE integration.). It does not directly establish Select a supported dual-hub SPA architecture and validate route advertisement and tunnel health for both hubs. The case-specific evidence is Fail the primary hub and observe PoP-to-secondary route selection and application continuity. [Case R161-C130; Fortinet task I3; anchors EXAM, SASE_SPA, SPA_ARCH.] [Question R161-Q0650.]
F:Incorrect for this case: Each traffic population receives its appropriate policy without accidental role inheritance. concerns the separate issue of Mixed edge and remote-user segmentation (Branch LAN-extension traffic and individual remote-user traffic share FortiSASE but need different access restrictions.). It does not directly establish A second authorized hub sustains private-app connectivity during a single-hub fault. The case-specific evidence is Fail the primary hub and observe PoP-to-secondary route selection and application continuity. [Case R161-C130; Fortinet task I3; anchors EXAM, SASE_SPA, SPA_ARCH.] [Question R161-Q0650.]
Fortinet NSE 7 - FortiSASE 26 Architect (NSE7_SSE_AR-26) Practice Tests