Juniper JN0-364 Exam Dumps, Practice Test Questions

100% Latest & Updated Juniper JN0-364 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!

Juniper JN0-364  Premium File
$54.99
$49.99

JN0-364 Premium File

  • Premium File: 69 Questions & Answers. Last update: Nov 9, 2026
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates

JN0-364 Premium File

Juniper JN0-364  Premium File
  • Premium File: 69 Questions & Answers. Last update: Nov 9, 2026
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates
$54.99
$49.99

Juniper JN0-364 Practice Test 10

Question 90

The segment has a stable elected DR and BDR, but a reviewer interprets ordinary two-way neighbors as failure on a non-DR router. Independently, the review flags the potentially unsafe practice “Treat every Two-Way state as proof LSAs never propagate”. Which validation addresses the risk without assuming a particular cause?

  1. Assume raising priority always preempts an already elected DR instantly
  2. Compare LSDB and Full adjacency toward DR or BDR
  3. Inspect OSPF interface network type and connected topology
  4. Inspect designated router identifiers and interface roles

Explanation

Correct Answer

B:

Two-Way can be expected between non-designated routers. Correct database flooding matters more than universal Full states.

Incorrect Answers

A:

OSPF DR elections are generally non-preemptive during normal operation.

C:

Network type changes election and adjacency expectations.

D:

DR and BDR coordination reduces adjacency overhead on multiaccess networks.

Question 91

A provider divides its OSPF network into backbone and regional areas, but routes from a new regional site never reach another region. The objective is to maintain connected backbone design. Which Junos configuration or design action best satisfies the objective?

  1. Verify area zero connectivity and each ABR's intended backbone membership
  2. Assume a router with only one area's interfaces is automatically the ABR
  3. Declare connectivity fixed because local router LSAs are present
  4. Enable a stub mismatch at only one side of an adjacency

Explanation

Correct Answer

A:

Inter-area routing depends on appropriate backbone connectivity.

Incorrect Answers

B:

Multiple relevant area associations define boundary behavior.

C:

Local LSAs do not by themselves deliver remote-area routes.

D:

Inconsistent area options can block neighbor formation.

Question 92

A provider divides its OSPF network into backbone and regional areas, but routes from a new regional site never reach another region. The objective is to identify ABR route functions. Which operational choice should be prioritized in this design?

  1. Treat any numbered nonbackbone area as an independent universal backbone
  2. Check the ABR is advertising appropriate inter-area reachability
  3. Declare connectivity fixed because local router LSAs are present
  4. Enable a stub mismatch at only one side of an adjacency

Explanation

Correct Answer

B:

Area border routers exchange summaries between their areas.

Incorrect Answers

A:

OSPF area zero has a designated backbone role.

C:

Local LSAs do not by themselves deliver remote-area routes.

D:

Inconsistent area options can block neighbor formation.

Question 93

A provider divides its OSPF network into backbone and regional areas, but routes from a new regional site never reach another region. The objective is to check stub-area restrictions. Which routing or switching control best fits the requirement?

  1. Assume a router with only one area's interfaces is automatically the ABR
  2. Assess whether the regional area type suppresses external LSAs as designed
  3. Declare connectivity fixed because local router LSAs are present
  4. Treat any numbered nonbackbone area as an independent universal backbone

Explanation

Correct Answer

B:

Stub area settings intentionally constrain certain advertisements.

Incorrect Answers

A:

Multiple relevant area associations define boundary behavior.

C:

Local LSAs do not by themselves deliver remote-area routes.

D:

OSPF area zero has a designated backbone role.

Question 94

A provider divides its OSPF network into backbone and regional areas, but routes from a new regional site never reach another region. The objective is to trace inter-area route installation. Which verification should be performed before approving the change?

  1. Treat any numbered nonbackbone area as an independent universal backbone
  2. Examine Type 3 summary reachability and active route selection
  3. Enable a stub mismatch at only one side of an adjacency
  4. Assume a router with only one area's interfaces is automatically the ABR

Explanation

Correct Answer

B:

Missing summary information explains absent inter-area prefixes.

Incorrect Answers

A:

OSPF area zero has a designated backbone role.

C:

Inconsistent area options can block neighbor formation.

D:

Multiple relevant area associations define boundary behavior.

Question 95

A provider divides its OSPF network into backbone and regional areas, but routes from a new regional site never reach another region. Two objectives apply: (1) identify ABR route functions; and (2) trace inter-area route installation. Which TWO controls together satisfy the requirements? Choose TWO.

  1. Assume a router with only one area's interfaces is automatically the ABR
  2. Declare connectivity fixed because local router LSAs are present
  3. Check the ABR is advertising appropriate inter-area reachability
  4. Treat any numbered nonbackbone area as an independent universal backbone
  5. Examine Type 3 summary reachability and active route selection

Explanation

Correct Answers

C:

Area border routers exchange summaries between their areas.

E:

Missing summary information explains absent inter-area prefixes.

Incorrect Answers

A:

Multiple relevant area associations define boundary behavior.

B:

Local LSAs do not by themselves deliver remote-area routes.

D:

OSPF area zero has a designated backbone role.

Question 96

A provider divides its OSPF network into backbone and regional areas, but routes from a new regional site never reach another region. Three objectives apply: (1) maintain connected backbone design; (2) check stub-area restrictions; and (3) trace inter-area route installation. Which THREE controls together satisfy the requirements? Choose THREE.

  1. Examine Type 3 summary reachability and active route selection
  2. Assume a router with only one area's interfaces is automatically the ABR
  3. Declare connectivity fixed because local router LSAs are present
  4. Treat any numbered nonbackbone area as an independent universal backbone
  5. Verify area zero connectivity and each ABR's intended backbone membership
  6. Assess whether the regional area type suppresses external LSAs as designed

Explanation

Correct Answers

A:

Missing summary information explains absent inter-area prefixes.

E:

Inter-area routing depends on appropriate backbone connectivity.

F:

Stub area settings intentionally constrain certain advertisements.

Incorrect Answers

B:

Multiple relevant area associations define boundary behavior.

C:

Local LSAs do not by themselves deliver remote-area routes.

D:

OSPF area zero has a designated backbone role.

Question 97

A regional router has local intra-area routes but no inter-area destinations because a backbone boundary was configured inconsistently. Independently, the review flags the potentially unsafe practice “Treat any numbered nonbackbone area as an independent universal backbone”. Which inspection best evaluates that practice?

  1. Review OSPF router role and inter-area LSA entries
  2. Inspect ABR interfaces and area-zero adjacency state
  3. Declare connectivity fixed because local router LSAs are present
  4. Compare area type and stub options on adjacent devices

Explanation

Correct Answer

B:

OSPF area zero has a designated backbone role. Inter-area routing depends on appropriate backbone connectivity.

Incorrect Answers

A:

Area border routers exchange summaries between their areas.

C:

Local LSAs do not by themselves deliver remote-area routes.

D:

Stub area settings intentionally constrain certain advertisements.

Question 98

A regional router has local intra-area routes but no inter-area destinations because a backbone boundary was configured inconsistently. Independently, the review flags the potentially unsafe practice “Assume a router with only one area's interfaces is automatically the ABR”. Which evidence most directly tests the flagged assumption?

  1. Inspect ABR interfaces and area-zero adjacency state
  2. Enable a stub mismatch at only one side of an adjacency
  3. Review OSPF router role and inter-area LSA entries
  4. Inspect summary LSAs and the receiving RIB for the target prefix

Explanation

Correct Answer

C:

Multiple relevant area associations define boundary behavior. Area border routers exchange summaries between their areas.

Incorrect Answers

A:

Inter-area routing depends on appropriate backbone connectivity.

B:

Inconsistent area options can block neighbor formation.

D:

Missing summary information explains absent inter-area prefixes.

Question 99

A regional router has local intra-area routes but no inter-area destinations because a backbone boundary was configured inconsistently. Independently, the review flags the potentially unsafe practice “Enable a stub mismatch at only one side of an adjacency”. Which diagnostic check tests this potentially unsafe choice?

  1. Inspect ABR interfaces and area-zero adjacency state
  2. Review OSPF router role and inter-area LSA entries
  3. Compare area type and stub options on adjacent devices
  4. Declare connectivity fixed because local router LSAs are present

Explanation

Correct Answer

C:

Inconsistent area options can block neighbor formation. Stub area settings intentionally constrain certain advertisements.

Incorrect Answers

A:

Inter-area routing depends on appropriate backbone connectivity.

B:

Area border routers exchange summaries between their areas.

D:

Local LSAs do not by themselves deliver remote-area routes.

Question 100

A regional router has local intra-area routes but no inter-area destinations because a backbone boundary was configured inconsistently. Independently, the review flags the potentially unsafe practice “Declare connectivity fixed because local router LSAs are present”. Which validation addresses the risk without assuming a particular cause?

  1. Assume a router with only one area's interfaces is automatically the ABR
  2. Inspect ABR interfaces and area-zero adjacency state
  3. Inspect summary LSAs and the receiving RIB for the target prefix
  4. Compare area type and stub options on adjacent devices

Explanation

Correct Answer

C:

Local LSAs do not by themselves deliver remote-area routes. Missing summary information explains absent inter-area prefixes.

Incorrect Answers

A:

Multiple relevant area associations define boundary behavior.

B:

Inter-area routing depends on appropriate backbone connectivity.

D:

Stub area settings intentionally constrain certain advertisements.

Service Provider Routing and Switching, Specialist (JNCIS-SP) (JN0-364) Practice Tests

UP

SPECIAL OFFER: GET 10% OFF

This is ONE TIME OFFER

ExamSnap Discount Offer
Enter Your Email Address to Receive Your 10% Off Discount Code

A confirmation link will be sent to this email address to verify your login. *We value your privacy. We will not rent or sell your email address.

Download Free Demo of VCE Exam Simulator

Experience Avanset VCE Exam Simulator for yourself.

Simply submit your e-mail address below to get started with our interactive software demo of your free trial.

Free Demo Limits: In the demo version you will be able to access only first 5 questions from exam.