100% Latest & Updated Juniper JN0-364 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!
Question 20
An aggregate appears in an advertisement, but downstream probes to an uncovered address are discarded by the summarizing router. Independently, the review flags the potentially unsafe practice “Export every route without filtering to ensure the summary is visible”. Which validation addresses the risk without assuming a particular cause?
- Assume any aggregate remains active even when all contributors disappear
- Trace route lookup for both covered and uncovered destinations
- Compare aggregate prefix boundaries with active contributing routes
- Compare BGP export advertisements with the approved summary policy
Explanation
Correct Answer
D:Unrestricted export can leak unwanted topology and reachability. Route origination does not guarantee external protocol export.
Incorrect Answers
A:An aggregate may become inactive when no contributor satisfies conditions.
B:A summary route may intentionally discard traffic without matching specific routes.
C:A summary should represent reachable components rather than arbitrary space.
Question 21
A provider edge learns a destination from a static route and an IGP and operators debate which should install in the forwarding table. The objective is to compare protocol preferences. Which Junos configuration or design action best satisfies the objective?
- Conclude that a route advertises correctly solely from its configuration stanza
- Assume a route with a preferred preference is active even with unresolved next hop
- Check the protocol route preferences before interpreting the selected active route
- Pick a BGP path solely because its OSPF link metric is numerically lower
Explanation
Correct Answer
C:Junos first compares route preferences across protocols.
Incorrect Answers
A:Configuration and data-plane installation require separate validation.
B:Preference does not repair missing next-hop reachability.
D:IGP metrics and BGP decision attributes are not interchangeable.
Question 22
A provider edge learns a destination from a static route and an IGP and operators debate which should install in the forwarding table. The objective is to compare metrics within a protocol. Which operational choice should be prioritized in this design?
- Use the metric of eligible paths within the same routing protocol after route preference
- Assume a route with a preferred preference is active even with unresolved next hop
- Conclude that a route advertises correctly solely from its configuration stanza
- Assume an OSPF metric always overrides a static route regardless of preference
Explanation
Correct Answer
A:Metrics help choose candidates within a protocol's selection rules.
Incorrect Answers
B:Preference does not repair missing next-hop reachability.
C:Configuration and data-plane installation require separate validation.
D:Metrics from different protocols do not alone determine cross-protocol selection.
Question 23
A provider edge learns a destination from a static route and an IGP and operators debate which should install in the forwarding table. The objective is to check next-hop viability. Which routing or switching control best fits the requirement?
- Assume an OSPF metric always overrides a static route regardless of preference
- Pick a BGP path solely because its OSPF link metric is numerically lower
- Conclude that a route advertises correctly solely from its configuration stanza
- Confirm the preferred route can resolve its next hop and become active
Explanation
Correct Answer
D:An unusable next hop can make a route ineligible despite preference.
Incorrect Answers
A:Metrics from different protocols do not alone determine cross-protocol selection.
B:IGP metrics and BGP decision attributes are not interchangeable.
C:Configuration and data-plane installation require separate validation.
Question 24
A provider edge learns a destination from a static route and an IGP and operators debate which should install in the forwarding table. The objective is to verify hardware forwarding. Which verification should be performed before approving the change?
- Assume an OSPF metric always overrides a static route regardless of preference
- Assume a route with a preferred preference is active even with unresolved next hop
- Pick a BGP path solely because its OSPF link metric is numerically lower
- Compare the active route in the routing table with the programmed forwarding next hop
Explanation
Correct Answer
D:Control-plane route selection must be reflected in forwarding state.
Incorrect Answers
A:Metrics from different protocols do not alone determine cross-protocol selection.
B:Preference does not repair missing next-hop reachability.
C:IGP metrics and BGP decision attributes are not interchangeable.
Question 25
A provider edge learns a destination from a static route and an IGP and operators debate which should install in the forwarding table. Two objectives apply: (1) compare protocol preferences; and (2) check next-hop viability. Which TWO controls together satisfy the requirements? Choose TWO.
- Assume a route with a preferred preference is active even with unresolved next hop
- Assume an OSPF metric always overrides a static route regardless of preference
- Check the protocol route preferences before interpreting the selected active route
- Confirm the preferred route can resolve its next hop and become active
- Pick a BGP path solely because its OSPF link metric is numerically lower
Explanation
Correct Answers
C:Junos first compares route preferences across protocols.
D:An unusable next hop can make a route ineligible despite preference.
Incorrect Answers
A:Preference does not repair missing next-hop reachability.
B:Metrics from different protocols do not alone determine cross-protocol selection.
E:IGP metrics and BGP decision attributes are not interchangeable.
Question 26
A provider edge learns a destination from a static route and an IGP and operators debate which should install in the forwarding table. Three objectives apply: (1) compare protocol preferences; (2) compare metrics within a protocol; and (3) verify hardware forwarding. Which THREE controls together satisfy the requirements? Choose THREE.
- Assume a route with a preferred preference is active even with unresolved next hop
- Pick a BGP path solely because its OSPF link metric is numerically lower
- Use the metric of eligible paths within the same routing protocol after route preference
- Check the protocol route preferences before interpreting the selected active route
- Compare the active route in the routing table with the programmed forwarding next hop
- Assume an OSPF metric always overrides a static route regardless of preference
Explanation
Correct Answers
C:Metrics help choose candidates within a protocol's selection rules.
D:Junos first compares route preferences across protocols.
E:Control-plane route selection must be reflected in forwarding state.
Incorrect Answers
A:Preference does not repair missing next-hop reachability.
B:IGP metrics and BGP decision attributes are not interchangeable.
F:Metrics from different protocols do not alone determine cross-protocol selection.
Question 27
A route change leaves an operator assuming the lowest hop count must win even though a different protocol route is active. Independently, the review flags the potentially unsafe practice “Assume an OSPF metric always overrides a static route regardless of preference”. Which inspection best evaluates that practice?
- Inspect forwarding-table entry and actual egress interface
- Inspect route preference values for competing candidate entries
- Examine selected protocol and its applicable metric or attributes
- Assume a route with a preferred preference is active even with unresolved next hop
Explanation
Correct Answer
B:Metrics from different protocols do not alone determine cross-protocol selection. Junos first compares route preferences across protocols.
Incorrect Answers
A:Control-plane route selection must be reflected in forwarding state.
C:Metrics help choose candidates within a protocol's selection rules.
D:Preference does not repair missing next-hop reachability.
Question 28
A route change leaves an operator assuming the lowest hop count must win even though a different protocol route is active. Independently, the review flags the potentially unsafe practice “Pick a BGP path solely because its OSPF link metric is numerically lower”. Which evidence most directly tests the flagged assumption?
- Inspect route preference values for competing candidate entries
- Conclude that a route advertises correctly solely from its configuration stanza
- Read hidden-route reason and next-hop resolution output
- Examine selected protocol and its applicable metric or attributes
Explanation
Correct Answer
D:IGP metrics and BGP decision attributes are not interchangeable. Metrics help choose candidates within a protocol's selection rules.
Incorrect Answers
A:Junos first compares route preferences across protocols.
B:Configuration and data-plane installation require separate validation.
C:An unusable next hop can make a route ineligible despite preference.
Question 29
A route change leaves an operator assuming the lowest hop count must win even though a different protocol route is active. Independently, the review flags the potentially unsafe practice “Assume a route with a preferred preference is active even with unresolved next hop”. Which diagnostic check tests this potentially unsafe choice?
- Inspect forwarding-table entry and actual egress interface
- Examine selected protocol and its applicable metric or attributes
- Assume an OSPF metric always overrides a static route regardless of preference
- Read hidden-route reason and next-hop resolution output
Explanation
Correct Answer
D:Preference does not repair missing next-hop reachability. An unusable next hop can make a route ineligible despite preference.
Incorrect Answers
A:Control-plane route selection must be reflected in forwarding state.
B:Metrics help choose candidates within a protocol's selection rules.
C:Metrics from different protocols do not alone determine cross-protocol selection.
Question 30
A route change leaves an operator assuming the lowest hop count must win even though a different protocol route is active. Independently, the review flags the potentially unsafe practice “Conclude that a route advertises correctly solely from its configuration stanza”. Which validation addresses the risk without assuming a particular cause?
- Inspect route preference values for competing candidate entries
- Read hidden-route reason and next-hop resolution output
- Inspect forwarding-table entry and actual egress interface
- Pick a BGP path solely because its OSPF link metric is numerically lower
Explanation
Correct Answer
C:Configuration and data-plane installation require separate validation. Control-plane route selection must be reflected in forwarding state.
Incorrect Answers
A:Junos first compares route preferences across protocols.
B:An unusable next hop can make a route ineligible despite preference.
D:IGP metrics and BGP decision attributes are not interchangeable.
Service Provider Routing and Switching, Specialist (JNCIS-SP) (JN0-364) Practice Tests