100% Latest & Updated LPI 102-500 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!
Question 630
A laptop can see the enterprise SSID but the NetworkManager profile has the wrong security method and never connects. Choose THREE measures that together correct the failure, demonstrate success and reduce recurrence.
- Apply the correct dynamic or static address to the proper interface using the authoritative manager.
- Provision Wi-Fi security profiles securely rather than embedding plaintext passwords in scripts.
- Configure the connection with the approved SSID and authentication settings using NetworkManager.
- Inspect ip link state and ping a known on-link neighbor after activation.
- Use nmcli device wifi list and inspect connection logs after an attempted association.
- Include operational link-state checks in incident triage.
Explanation
Correct Answers
B:Provision Wi-Fi security profiles securely rather than embedding plaintext passwords in scripts. It prevents repetition of the condition: SSID selection alone is insufficient when the wireless security and credentials do not match the access point.
C:Configure the connection with the approved SSID and authentication settings using NetworkManager. It corrects the mechanism identified in the scenario: SSID selection alone is insufficient when the wireless security and credentials do not match the access point.
E:Use nmcli device wifi list and inspect connection logs after an attempted association. The observation confirms the diagnosis or falsifies it before declaring the incident resolved.
Incorrect Answers
A:The test for missing address on live interface would be: Check ip addr show dev interface and run an on-link test to confirm reachability. The relevant acceptance check here is: Use nmcli device wifi list and inspect connection logs after an attempted association.
D:That choice responds to a network interface administratively down failure. In this incident, SSID selection alone is insufficient when the wireless security and credentials do not match the access point.
F:This option assumes An administratively down interface cannot pass ordinary traffic until brought up. The reported symptoms instead call for: Configure the connection with the approved SSID and authentication settings using NetworkManager.
Question 631
A machine's name changes only until reboot after a technician invokes hostname without updating persistent configuration. Which failure condition fits the evidence without assuming an unrelated fault?
- Conventional HTTPS traffic uses TLS over TCP port 443 rather than TCP port 80.
- The hostname command can alter runtime state without changing the static hostname policy.
- Only 172.16.0.0 through 172.31.255.255 belongs to the 172.16/12 private range.
- Routing preference can depend on metrics when multiple eligible routes share a destination prefix.
Explanation
Correct Answer
B:The hostname command can alter runtime state without changing the static hostname policy. That cause connects the stated symptom to the corrective action: Set the static hostname using hostnamectl or the distribution's supported persistent configuration.
Incorrect Answers
A:That choice responds to a tls application port failure. In this incident, The hostname command can alter runtime state without changing the static hostname policy.
C:Only 172.16.0.0 through 172.31.255.255 belongs to the 172.16/12 private range. belongs to a situation where Only 172.16.0.0 through 172.31.255.255 belongs to the 172.16/12 private range. Here the evidence supports a different requirement: The hostname command can alter runtime state without changing the static hostname policy.
D:Routing preference can depend on metrics when multiple eligible routes share a destination prefix. belongs to a situation where Routing preference can depend on metrics when multiple eligible routes share a destination prefix. Here the evidence supports a different requirement: The hostname command can alter runtime state without changing the static hostname policy.
Question 632
A machine's name changes only until reboot after a technician invokes hostname without updating persistent configuration. Which intervention addresses the specific problem with the least unrelated change?
- Set the static hostname using hostnamectl or the distribution's supported persistent configuration.
- Configure or obtain a valid IPv6 default route from the network's authorized router.
- Inspect and adjust the relevant route metrics or NetworkManager profile priorities.
- Choose TCP when transport-level reliability is required or implement those controls in the UDP application.
Explanation
Correct Answer
A:Set the static hostname using hostnamectl or the distribution's supported persistent configuration. It corrects the mechanism identified in the scenario: The hostname command can alter runtime state without changing the static hostname policy.
Incorrect Answers
B:It would address ipv6 route omission rather than the present problem. The appropriate correction here is: Set the static hostname using hostnamectl or the distribution's supported persistent configuration.
C:This belongs to unexpected route metric, where Routing preference can depend on metrics when multiple eligible routes share a destination prefix. The current issue instead is: The hostname command can alter runtime state without changing the static hostname policy.
D:It would address tcp versus udp application fit rather than the present problem. The appropriate correction here is: Set the static hostname using hostnamectl or the distribution's supported persistent configuration.
Question 633
A machine's name changes only until reboot after a technician invokes hostname without updating persistent configuration. Which observation should be used for acceptance testing?
- Use ip route get for a remote address and test reachability through the gateway.
- Check query results and TTLs from each resolver before deciding whether caching or source data differs.
- Check ip addr show dev interface and run an on-link test to confirm reachability.
- Reboot and compare hostnamectl status with hostname output.
Explanation
Correct Answer
D:Reboot and compare hostnamectl status with hostname output. The test is evidence-based because the underlying failure was: The hostname command can alter runtime state without changing the static hostname policy.
Incorrect Answers
A:That choice responds to a default route necessary for off-subnet traffic failure. In this incident, The hostname command can alter runtime state without changing the static hostname policy.
B:This option assumes A configured or caching resolver may differ from authoritative or alternative resolver results. The reported symptoms instead call for: Set the static hostname using hostnamectl or the distribution's supported persistent configuration.
C:This belongs to missing address on live interface, where Layer-two link state does not imply that an IPv4 or IPv6 address has been configured. The current issue instead is: The hostname command can alter runtime state without changing the static hostname policy.
Question 634
A machine's name changes only until reboot after a technician invokes hostname without updating persistent configuration. Which repeatable check would reduce recurrence?
- Document timeout and refusal as distinct evidence types in runbooks.
- Use named-server comparisons to distinguish resolver-local faults from zone data.
- Include L2 neighbor evidence when diagnosing local-network reachability.
- Maintain stable host identities through declarative provisioning.
Explanation
Correct Answer
D:Maintain stable host identities through declarative provisioning. The underlying risk is The hostname command can alter runtime state without changing the static hostname policy.
Incorrect Answers
A:Document timeout and refusal as distinct evidence types in runbooks. could help with timeout versus refusal; it neither resolves nor demonstrates the current requirement. The distinguishing check is: Reboot and compare hostnamectl status with hostname output.
B:Use named-server comparisons to distinguish resolver-local faults from zone data. could help with explicit dns server comparison; it neither resolves nor demonstrates the current requirement. The distinguishing check is: Reboot and compare hostnamectl status with hostname output.
C:This option assumes ARP neighbor discovery is not resolving the peer's link-layer address, suggesting a local link or peer problem. The reported symptoms instead call for: Set the static hostname using hostnamectl or the distribution's supported persistent configuration.
Question 635
A machine's name changes only until reboot after a technician invokes hostname without updating persistent configuration. Select TWO justified actions that address this particular problem and confirm closure.
- Inspect and adjust the relevant route metrics or NetworkManager profile priorities.
- Model protocol and port combinations rather than assuming one transport for all DNS behavior.
- Set the static hostname using hostnamectl or the distribution's supported persistent configuration.
- Inspect ip link state and ping a known on-link neighbor after activation.
- Reboot and compare hostnamectl status with hostname output.
Explanation
Correct Answers
C:Set the static hostname using hostnamectl or the distribution's supported persistent configuration. The change should be accepted only after this test: Reboot and compare hostnamectl status with hostname output.
E:Reboot and compare hostnamectl status with hostname output. The test is evidence-based because the underlying failure was: The hostname command can alter runtime state without changing the static hostname policy.
Incorrect Answers
A:The test for unexpected route metric would be: Use ip route get for a target and verify the selected outgoing interface. The relevant acceptance check here is: Reboot and compare hostnamectl status with hostname output.
B:Model protocol and port combinations rather than assuming one transport for all DNS behavior. could help with dns usually udp but can use tcp; it neither resolves nor demonstrates the current requirement. The distinguishing check is: Reboot and compare hostnamectl status with hostname output.
D:This belongs to network interface administratively down, where An administratively down interface cannot pass ordinary traffic until brought up. The current issue instead is: The hostname command can alter runtime state without changing the static hostname policy.
Question 636
A dual-stack workstation receives a working IPv4 address after reconnect but never configures IPv6 even though the router advertises an approved prefix. What underlying Linux behavior should the administrator identify first?
- For 192.0.2.0/26, address .63 is the broadcast address, not a usable host address.
- ICMP echo tests do not prove a particular TCP destination port is reachable.
- The saved NetworkManager profile has IPv6 disabled, so router advertisements cannot supply the intended host configuration.
- SNMP polling commonly targets UDP 161, whereas SNMP traps commonly use UDP 162.
Explanation
Correct Answer
C:The saved NetworkManager profile has IPv6 disabled, so router advertisements cannot supply the intended host configuration. Addressing the cause requires: Change the connection profile to an approved IPv6 auto method and reactivate it under a controlled rollback plan.
Incorrect Answers
A:For 192.0.2.0/26, address .63 is the broadcast address, not a usable host address. belongs to a situation where For 192.0.2.0/26, address .63 is the broadcast address, not a usable host address. Here the evidence supports a different requirement: The saved NetworkManager profile has IPv6 disabled, so router advertisements cannot supply the intended host configuration.
B:ICMP echo tests do not prove a particular TCP destination port is reachable. could help with network port test without application protocol; it neither resolves nor demonstrates the current requirement. The distinguishing check is: Check nmcli connection IPv6 method, ip -6 addr and ip -6 route after a clean reconnect.
D:The test for snmp manager polling would be: Verify agent polling and trap delivery separately under the final firewall policy. The relevant acceptance check here is: Check nmcli connection IPv6 method, ip -6 addr and ip -6 route after a clean reconnect.
Question 637
A dual-stack workstation receives a working IPv4 address after reconnect but never configures IPv6 even though the router advertises an approved prefix. Which configuration approach is appropriate for this requirement?
- Inspect /etc/nsswitch.conf hosts order and remove the stale local mapping if not required.
- Assign an address between .1 and .62 for a host in that specific /26 network.
- Permit policy-approved HTTPS egress on the correct transport and destination ranges.
- Change the connection profile to an approved IPv6 auto method and reactivate it under a controlled rollback plan.
Explanation
Correct Answer
D:Change the connection profile to an approved IPv6 auto method and reactivate it under a controlled rollback plan. This is appropriate because The saved NetworkManager profile has IPv6 disabled, so router advertisements cannot supply the intended host configuration.
Incorrect Answers
A:This option assumes Application lookup may use NSS with files before DNS, while dig queries DNS directly. The reported symptoms instead call for: Change the connection profile to an approved IPv6 auto method and reactivate it under a controlled rollback plan.
B:That choice responds to a ipv4 network boundary failure. In this incident, The saved NetworkManager profile has IPv6 disabled, so router advertisements cannot supply the intended host configuration.
C:The test for tls application port would be: Connect to a known HTTPS endpoint and inspect the negotiated TLS session. The relevant acceptance check here is: Check nmcli connection IPv6 method, ip -6 addr and ip -6 route after a clean reconnect.
Question 638
A dual-stack workstation receives a working IPv4 address after reconnect but never configures IPv6 even though the router advertises an approved prefix. What focused test would distinguish a real correction from a cosmetic change?
- Check nmcli connection IPv6 method, ip -6 addr and ip -6 route after a clean reconnect.
- Capture the actual packet source and compare it with the service's allowlist.
- Compare getent hosts and dig for the name and identify the selected source.
- Use ip route get for a remote address and test reachability through the gateway.
Explanation
Correct Answer
A:Check nmcli connection IPv6 method, ip -6 addr and ip -6 route after a clean reconnect. The observation confirms the diagnosis or falsifies it before declaring the incident resolved.
Incorrect Answers
B:The test for wrong source address selection would be: Capture the actual packet source and compare it with the service's allowlist. The relevant acceptance check here is: Check nmcli connection IPv6 method, ip -6 addr and ip -6 route after a clean reconnect.
C:Application lookup may use NSS with files before DNS, while dig queries DNS directly. That describes a different fault. Here, The saved NetworkManager profile has IPv6 disabled, so router advertisements cannot supply the intended host configuration.
D:The local connected route does not tell the kernel where to send traffic outside the connected subnet. That describes a different fault. Here, The saved NetworkManager profile has IPv6 disabled, so router advertisements cannot supply the intended host configuration.
Question 639
A dual-stack workstation receives a working IPv4 address after reconnect but never configures IPv6 even though the router advertises an approved prefix. Which repeatable check would reduce recurrence?
- Test address assignment separately from physical carrier and routing.
- Test both IPv4 and IPv6 profile persistence in dual-stack provisioning checks.
- Check first and last subnet addresses before IP assignment.
- Record actual service listener ports before writing transport rules.
Explanation
Correct Answer
B:Test both IPv4 and IPv6 profile persistence in dual-stack provisioning checks. It makes the outcome of the targeted repair (Change the connection profile to an approved IPv6 auto method and reactivate it under a controlled rollback plan.) repeatable.
Incorrect Answers
A:It would address missing address on live interface rather than the present problem. The appropriate correction here is: Change the connection profile to an approved IPv6 auto method and reactivate it under a controlled rollback plan.
C:This belongs to ipv4 network boundary, where For 192.0.2.0/26, address .63 is the broadcast address, not a usable host address. The current issue instead is: The saved NetworkManager profile has IPv6 disabled, so router advertisements cannot supply the intended host configuration.
D:This belongs to ssh and mail protocol ports, where Standard SSH service is TCP 22; SMTP mail transfer commonly uses TCP 25. The current issue instead is: The saved NetworkManager profile has IPv6 disabled, so router advertisements cannot supply the intended host configuration.
Question 640
A dual-stack workstation receives a working IPv4 address after reconnect but never configures IPv6 even though the router advertises an approved prefix. Which THREE actions form a suitable remediation, verification and prevention plan? Select THREE.
- Test the actual application protocol and inspect routing/firewall policy before concluding service failure.
- Size subnets from required usable addresses and reserve capacity for growth.
- Test both IPv4 and IPv6 profile persistence in dual-stack provisioning checks.
- Test a suitable DNS-over-TCP query separately from a UDP lookup.
- Change the connection profile to an approved IPv6 auto method and reactivate it under a controlled rollback plan.
- Check nmcli connection IPv6 method, ip -6 addr and ip -6 route after a clean reconnect.
Explanation
Correct Answers
C:Test both IPv4 and IPv6 profile persistence in dual-stack provisioning checks. It makes the outcome of the targeted repair (Change the connection profile to an approved IPv6 auto method and reactivate it under a controlled rollback plan.) repeatable.
E:Change the connection profile to an approved IPv6 auto method and reactivate it under a controlled rollback plan. It corrects the mechanism identified in the scenario: The saved NetworkManager profile has IPv6 disabled, so router advertisements cannot supply the intended host configuration.
F:Check nmcli connection IPv6 method, ip -6 addr and ip -6 route after a clean reconnect. This measures the specific result of applying: Change the connection profile to an approved IPv6 auto method and reactivate it under a controlled rollback plan.
Incorrect Answers
A:The test for icmp diagnostic role would be: Compare ping, traceroute and a protocol-specific connection test to the same host. The relevant acceptance check here is: Check nmcli connection IPv6 method, ip -6 addr and ip -6 route after a clean reconnect.
B:Size subnets from required usable addresses and reserve capacity for growth. belongs to a situation where A /28 has 16 total addresses and ordinarily only 14 usable host addresses, so it cannot fit 25 hosts. Here the evidence supports a different requirement: Test both IPv4 and IPv6 profile persistence in dual-stack provisioning checks.
D:Test a suitable DNS-over-TCP query separately from a UDP lookup. belongs to a situation where DNS commonly uses UDP and also uses TCP for responses and operations requiring it. Here the evidence supports a different requirement: Check nmcli connection IPv6 method, ip -6 addr and ip -6 route after a clean reconnect.
LPI Level 1 (102-500) Practice Tests