100% Latest & Updated Microsoft AZ-700 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!
Question 240
A support engineer needs to know if an NSG blocks a VM's outbound TCP connection. During acceptance testing, a blocked connection is misattributed to DNS. Which underlying configuration problem best explains the symptom?
- A more specific effective route supersedes the expected route
- An effective NSG rule denies the tested flow
- Effective routes in that spoke omit the propagated destination
- One direction of VNet peering or the effective network policy is missing
Explanation
Correct Answer
B:An effective NSG rule denies the tested flow explains the observed failure: a blocked connection is misattributed to DNS. Correct the design by using use Network Watcher IP flow verify, implemented through specify NIC, direction, source/destination IP and port in IP flow verify.
Incorrect Answers
A:A more specific effective route supersedes the expected route. This concerns finding which route an azure vm actually uses after peering and BGP advertisements. Here, an effective NSG rule denies the tested flow.
C:Effective routes in that spoke omit the propagated destination. This concerns being usable by multiple spoke vnets. Here, an effective NSG rule denies the tested flow.
D:One direction of VNet peering or the effective network policy is missing. This concerns two azure vnets in the same tenant require private low-latency connectivity without routing through the internet. Here, an effective NSG rule denies the tested flow.
Question 241
A new application cannot reach a target VM and needs a path-by-path diagnosis. Which Azure networking design most directly satisfies this requirement?
- Deploy a supported Azure Virtual Network Manager routing configuration
- Attach private DNS zone virtual network links to each required spoke
- Enable Activity Log and central diagnostic retention for network control-plane events
- Use Network Watcher connection troubleshoot
Explanation
Correct Answer
D:Use Network Watcher connection troubleshoot addresses the topology, access or delivery requirement in the scenario. Apply it by start a diagnostic from source VM to target IP and port; confirm by inspect reachability and the hop or issue identified.
Incorrect Answers
A:Deploy a supported Azure Virtual Network Manager routing configuration. This is relevant when a large region uses a central routing policy for many hub-spoke links. Instead, use Network Watcher connection troubleshoot.
B:Attach private DNS zone virtual network links to each required spoke. This concerns a shared hub contains a Private DNS zone but only one of three spokes resolves it. Instead, use Network Watcher connection troubleshoot.
C:Enable Activity Log and central diagnostic retention for network control-plane events. This concerns tracking of VNet peering changes across subscriptions. Instead, use Network Watcher connection troubleshoot.
Question 242
A new application cannot reach a target VM and needs a path-by-path diagnosis. The architecture uses this design: Use Network Watcher connection troubleshoot. Which configuration should the engineer apply to implement it?
- Run nslookup or Resolve-DnsName and a port connectivity test against the returned IP
- Enable relevant Azure Monitor network resource metrics and diagnostic settings
- Choose a subnet in the target VNet and allocate a private endpoint there
- Start a diagnostic from source VM to target IP and port
Explanation
Correct Answer
D:Start a diagnostic from source VM to target IP and port is the operational configuration for use network watcher connection troubleshoot. The acceptance test is to inspect reachability and the hop or issue identified.
Incorrect Answers
A:Run nslookup or Resolve-DnsName and a port connectivity test against the returned IP is a concrete step for test dns answers and direct private-ip tcp reachability separately. Here the selected design is use network watcher connection troubleshoot, which instead requires start a diagnostic from source vm to target ip and port.
B:Enable relevant Azure Monitor network resource metrics and diagnostic settings is a concrete step for use azure monitor network insights and appropriate network telemetry. Here the selected design is use network watcher connection troubleshoot, which instead requires start a diagnostic from source vm to target ip and port.
C:Choose a subnet in the target VNet and allocate a private endpoint there is a concrete step for create a suitable subnet and deploy the private endpoint nic in it. Here the selected design is use network watcher connection troubleshoot, which instead requires start a diagnostic from source vm to target ip and port.
Question 243
A new application cannot reach a target VM and needs a path-by-path diagnosis. After the team applies this change—start a diagnostic from source VM to target IP and port—which validation best proves the intended result?
- Inspect reachability and the hop or issue identified
- Inspect attack metrics and mitigation reports during a controlled event
- Inspect prefix provisioning status and test external routing of an assigned address
- Inspect the resulting address plan against all service subnet minimum sizes
Explanation
Correct Answer
A:Inspect reachability and the hop or issue identified directly checks whether the intended outcome occurs, not merely whether a resource exists. If the check fails, investigate whether a route, NSG, firewall or listener blocks the tested path.
Incorrect Answers
B:Inspect attack metrics and mitigation reports during a controlled event. This is relevant when an early warning when its azure public endpoint is targeted by volumetric attacks. Instead, inspect reachability and the hop or issue identified.
C:Inspect prefix provisioning status and test external routing of an assigned address. This concerns using its own address range in azure. Instead, inspect reachability and the hop or issue identified.
D:Inspect the resulting address plan against all service subnet minimum sizes. This concerns route-aware service placement before defining the hub address blocks. Instead, inspect reachability and the hop or issue identified.
Question 244
A new application cannot reach a target VM and needs a path-by-path diagnosis. During acceptance testing, the probe reports unreachable despite both VMs running. Which underlying configuration problem best explains the symptom?
- The route table was never associated with the workload subnet
- The private destination has no appropriate specific route or endpoint network policy
- A route, NSG, firewall or listener blocks the tested path
- The assumed route choice ignores the more-specific prefix
Explanation
Correct Answer
C:A route, NSG, firewall or listener blocks the tested path explains the observed failure: the probe reports unreachable despite both VMs running. Correct the design by using use Network Watcher connection troubleshoot, implemented through start a diagnostic from source VM to target IP and port.
Incorrect Answers
A:The route table was never associated with the workload subnet. This is relevant when a route table is created but its udrs have no effect on an application vm. Here, a route, NSG, firewall or listener blocks the tested path.
B:The private destination has no appropriate specific route or endpoint network policy. This concerns reaching a local private endpoint directly. Here, a route, NSG, firewall or listener blocks the tested path.
D:The assumed route choice ignores the more-specific prefix. This concerns a vm has an effective udr for a private destination and a broader BGP route for the same service. Here, a route, NSG, firewall or listener blocks the tested path.
Question 245
A cloud operations team needs a durable record of permitted and denied VNet traffic. Which Azure networking design most directly satisfies this requirement?
- Configure supported Azure public DNS A/alias and www record mappings
- Use Network Watcher Connection troubleshoot for the source and destination
- Review Defender for Cloud Secure Score network recommendations
- Enable virtual network flow logs on the supported network scope
Explanation
Correct Answer
D:Enable virtual network flow logs on the supported network scope addresses the topology, access or delivery requirement in the scenario. Apply it by configure VNet flow log collection to a supported storage destination; confirm by inspect collected flow records and test an allowed and denied connection.
Incorrect Answers
A:Configure supported Azure public DNS A/alias and www record mappings. This concerns being reachable at both apex and www with proper public DNS. Instead, enable virtual network flow logs on the supported network scope.
B:Use Network Watcher Connection troubleshoot for the source and destination. This concerns a transient connectivity assessment from a VM to an external destination. Instead, enable virtual network flow logs on the supported network scope.
C:Review Defender for Cloud Secure Score network recommendations. This concerns prioritized network hardening suggestions from Microsoft Defender for Cloud. Instead, enable virtual network flow logs on the supported network scope.
Question 246
A cloud operations team needs a durable record of permitted and denied VNet traffic. The architecture uses this design: Enable virtual network flow logs on the supported network scope. Which configuration should the engineer apply to implement it?
- Configure on-premises conditional forwarders to the reachable inbound endpoint IP
- Configure VNet flow log collection to a supported storage destination
- Configure the endpoint zone group for privatelink.vaultcore.azure.net
- Associate a DDoS protection plan and configure telemetry alerts
Explanation
Correct Answer
B:Configure VNet flow log collection to a supported storage destination is the operational configuration for enable virtual network flow logs on the supported network scope. The acceptance test is to inspect collected flow records and test an allowed and denied connection.
Incorrect Answers
A:Configure on-premises conditional forwarders to the reachable inbound endpoint IP is a concrete step for forward azure private dns requests to an azure dns private resolver inbound endpoint. Here the selected design is enable virtual network flow logs on the supported network scope, which instead requires configure vnet flow log collection to a supported storage destination.
C:Configure the endpoint zone group for privatelink.vaultcore.azure.net is a concrete step for bind the appropriate private dns zone to the key vault private endpoint. Here the selected design is enable virtual network flow logs on the supported network scope, which instead requires configure vnet flow log collection to a supported storage destination.
D:Associate a DDoS protection plan and configure telemetry alerts is a concrete step for enable and monitor azure ddos protection on applicable public-ip vnets. Here the selected design is enable virtual network flow logs on the supported network scope, which instead requires configure vnet flow log collection to a supported storage destination.
Question 247
A cloud operations team needs a durable record of permitted and denied VNet traffic. After the team applies this change—configure VNet flow log collection to a supported storage destination—which validation best proves the intended result?
- Verify deployment and inspect the subnet delegation property
- Inspect effective routes in the spoke for on-premises prefixes via the hub
- Inspect reachability and the hop or issue identified
- Inspect collected flow records and test an allowed and denied connection
Explanation
Correct Answer
D:Inspect collected flow records and test an allowed and denied connection directly checks whether the intended outcome occurs, not merely whether a resource exists. If the check fails, investigate whether virtual network flow log collection is not enabled.
Incorrect Answers
A:Verify deployment and inspect the subnet delegation property. This concerns exclusive delegation. Instead, inspect collected flow records and test an allowed and denied connection.
B:Inspect effective routes in the spoke for on-premises prefixes via the hub. This concerns using the hub's vpn gateway to communicate with an on-premises network. Instead, inspect collected flow records and test an allowed and denied connection.
C:Inspect reachability and the hop or issue identified. This concerns a path-by-path diagnosis. Instead, inspect collected flow records and test an allowed and denied connection.
Question 248
A cloud operations team needs a durable record of permitted and denied VNet traffic. During acceptance testing, auditors cannot reconstruct VNet traffic decisions. Which underlying configuration problem best explains the symptom?
- The deployment scope or network group assignment excludes the VNet
- Virtual network flow log collection is not enabled
- One direction of VNet peering or the effective network policy is missing
- The private destination has no appropriate specific route or endpoint network policy
Explanation
Correct Answer
B:Virtual network flow log collection is not enabled explains the observed failure: auditors cannot reconstruct VNet traffic decisions. Correct the design by using enable virtual network flow logs on the supported network scope, implemented through configure VNet flow log collection to a supported storage destination.
Incorrect Answers
A:The deployment scope or network group assignment excludes the VNet. This is relevant when a large region uses a central routing policy for many hub-spoke links. Here, virtual network flow log collection is not enabled.
C:One direction of VNet peering or the effective network policy is missing. This concerns two azure vnets in the same tenant require private low-latency connectivity without routing through the internet. Here, virtual network flow log collection is not enabled.
D:The private destination has no appropriate specific route or endpoint network policy. This concerns reaching a local private endpoint directly. Here, virtual network flow log collection is not enabled.
Question 249
An organization wants an early warning when its Azure public endpoint is targeted by volumetric attacks. Which Azure networking design most directly satisfies this requirement?
- Link the Private DNS zone to both client VNets
- Enable and monitor Azure DDoS Protection on applicable public-IP VNets
- Enable virtual network flow logs on the supported network scope
- Use Azure NAT Gateway for predictable subnet outbound SNAT
Explanation
Correct Answer
B:Enable and monitor Azure DDoS Protection on applicable public-IP VNets addresses the topology, access or delivery requirement in the scenario. Apply it by associate a DDoS protection plan and configure telemetry alerts; confirm by inspect attack metrics and mitigation reports during a controlled event.
Incorrect Answers
A:Link the Private DNS zone to both client VNets. This concerns two peered VNets must resolve the same internal service's Private DNS A record. Instead, enable and monitor Azure DDoS Protection on applicable public-IP VNets.
C:Enable virtual network flow logs on the supported network scope. This concerns a durable record of permitted and denied VNet traffic. Instead, enable and monitor Azure DDoS Protection on applicable public-IP VNets.
D:Use Azure NAT Gateway for predictable subnet outbound SNAT. This concerns outbound access but must not have unsolicited inbound internet connectivity. Instead, enable and monitor Azure DDoS Protection on applicable public-IP VNets.
Question 250
An organization wants an early warning when its Azure public endpoint is targeted by volumetric attacks. The architecture uses this design: Enable and monitor Azure DDoS Protection on applicable public-IP VNets. Which configuration should the engineer apply to implement it?
- Configure VNet flow log collection to a supported storage destination
- Configure on-premises conditional forwarders to the reachable inbound endpoint IP
- Associate a DDoS protection plan and configure telemetry alerts
- Build an Explorer query filtering internet-exposed network assets
Explanation
Correct Answer
C:Associate a DDoS protection plan and configure telemetry alerts is the operational configuration for enable and monitor azure ddos protection on applicable public-ip vnets. The acceptance test is to inspect attack metrics and mitigation reports during a controlled event.
Incorrect Answers
A:Configure VNet flow log collection to a supported storage destination is a concrete step for enable virtual network flow logs on the supported network scope. Here the selected design is enable and monitor azure ddos protection on applicable public-ip vnets, which instead requires associate a ddos protection plan and configure telemetry alerts.
B:Configure on-premises conditional forwarders to the reachable inbound endpoint IP is a concrete step for forward azure private dns requests to an azure dns private resolver inbound endpoint. Here the selected design is enable and monitor azure ddos protection on applicable public-ip vnets, which instead requires associate a ddos protection plan and configure telemetry alerts.
D:Build an Explorer query filtering internet-exposed network assets is a concrete step for use defender for cloud cloud security explorer. Here the selected design is enable and monitor azure ddos protection on applicable public-ip vnets, which instead requires associate a ddos protection plan and configure telemetry alerts.
Designing and Implementing Microsoft Azure Networking Solutions (AZ-700) Practice Tests