100% Latest & Updated Microsoft AZ-700 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!
Question 470
A Virtual WAN hub needs an IPsec termination point for corporate branches. The architecture uses this design: Deploy a site-to-site VPN gateway inside the Virtual WAN virtual hub. Which configuration should the engineer apply to implement it?
- Select the appropriate Virtual WAN SKU before creating the required hubs
- Configure remote public VPN endpoint and its reachable on-premises network CIDRs
- Create the virtual hub VPN gateway and configure VPN sites and connections
- Configure required DNS servers or Private Resolver reachability in the client setup
Explanation
Correct Answer
C:Create the virtual hub VPN gateway and configure VPN sites and connections is the operational configuration for deploy a site-to-site vpn gateway inside the virtual wan virtual hub. The acceptance test is to check VPN gateway connections and test a branch private subnet.
Incorrect Answers
A:Select the appropriate Virtual WAN SKU before creating the required hubs is a concrete step for assess basic virtual wan capability versus standard feature needs. Here the selected design is deploy a site-to-site vpn gateway inside the virtual wan virtual hub, which instead requires create the virtual hub vpn gateway and configure vpn sites and connections.
B:Configure remote public VPN endpoint and its reachable on-premises network CIDRs is a concrete step for create a local network gateway with correct site address and prefixes. Here the selected design is deploy a site-to-site vpn gateway inside the virtual wan virtual hub, which instead requires create the virtual hub vpn gateway and configure vpn sites and connections.
D:Configure required DNS servers or Private Resolver reachability in the client setup is a concrete step for deliver appropriate dns resolver settings to p2s vpn clients. Here the selected design is deploy a site-to-site vpn gateway inside the virtual wan virtual hub, which instead requires create the virtual hub vpn gateway and configure vpn sites and connections.
Question 471
A Virtual WAN hub needs an IPsec termination point for corporate branches. After the team applies this change—create the virtual hub VPN gateway and configure VPN sites and connections—which validation best proves the intended result?
- Resolve a private hostname after connection and confirm its private answer
- Check physical cross-connect completion and peering status
- Inspect virtual hub region, address pool and gateway status
- Check VPN gateway connections and test a branch private subnet
Explanation
Correct Answer
D:Check VPN gateway connections and test a branch private subnet directly checks whether the intended outcome occurs, not merely whether a resource exists. If the check fails, investigate whether the required Virtual WAN VPN gateway was not deployed.
Incorrect Answers
A:Resolve a private hostname after connection and confirm its private answer. This is relevant when an employee is connected to azure vpn but private DNS names are not resolving. Instead, check VPN gateway connections and test a branch private subnet.
B:Check physical cross-connect completion and peering status. This concerns choosing the correct expressroute connectivity model for a colocation facility. Instead, check VPN gateway connections and test a branch private subnet.
C:Inspect virtual hub region, address pool and gateway status. This concerns branch connectivity through a managed hub. Instead, check VPN gateway connections and test a branch private subnet.
Question 472
A Virtual WAN hub needs an IPsec termination point for corporate branches. During acceptance testing, the virtual hub has no tunnel termination resource. Which underlying configuration problem best explains the symptom?
- The required Virtual WAN VPN gateway was not deployed
- The gateway cannot reach the RADIUS endpoint or the shared secret differs
- The failure lies in BGP or gateway linkage rather than circuit resource existence
- Point-to-site address pool or gateway P2S configuration is missing
Explanation
Correct Answer
A:The required Virtual WAN VPN gateway was not deployed explains the observed failure: the virtual hub has no tunnel termination resource. Correct the design by using deploy a site-to-site VPN gateway inside the Virtual WAN virtual hub, implemented through create the virtual hub VPN gateway and configure VPN sites and connections.
Incorrect Answers
B:The gateway cannot reach the RADIUS endpoint or the shared secret differs. This concerns a central radius service to validate users. Here, the required Virtual WAN VPN gateway was not deployed.
C:The failure lies in BGP or gateway linkage rather than circuit resource existence. This is relevant when a team is troubleshooting a circuit that is not passing traffic after handoff. Here, the required Virtual WAN VPN gateway was not deployed.
D:Point-to-site address pool or gateway P2S configuration is missing. This concerns remote consultants require per-user encrypted vpn access without maintaining a site router. Here, the required Virtual WAN VPN gateway was not deployed.
Question 473
Remote employees need user VPN access through the managed global WAN. Which Azure networking design most directly satisfies this requirement?
- Assess Basic Virtual WAN capability versus Standard feature needs
- Add a point-to-site User VPN gateway to the Virtual WAN hub
- Choose a supported VpnGw gateway generation/SKU based on documented scale needs
- Evaluate policy-based compatibility against Azure VPN Gateway support and requirements
Explanation
Correct Answer
B:Add a point-to-site User VPN gateway to the Virtual WAN hub addresses the topology, access or delivery requirement in the scenario. Apply it by create a User VPN configuration and associate it with the virtual hub User VPN gateway; confirm by connect a pilot client and verify hub-connected VNet access.
Incorrect Answers
A:Assess Basic Virtual WAN capability versus Standard feature needs. This concerns simple isolated site-to-site VPN connections without advanced transitive features. Instead, add a point-to-site User VPN gateway to the Virtual WAN hub.
C:Choose a supported VpnGw gateway generation/SKU based on documented scale needs. This concerns selecting a VPN Gateway SKU for expected throughput and resiliency. Instead, add a point-to-site User VPN gateway to the Virtual WAN hub.
D:Evaluate policy-based compatibility against Azure VPN Gateway support and requirements. This concerns a legacy on-premises IPSEC device only supports policy-based traffic selectors. Instead, add a point-to-site User VPN gateway to the Virtual WAN hub.
Question 474
Remote employees need user VPN access through the managed global WAN. The architecture uses this design: Add a point-to-site User VPN gateway to the Virtual WAN hub. Which configuration should the engineer apply to implement it?
- Set the RADIUS server IP/secret and ensure the gateway can reach the service
- Enable gateway diagnostic categories and review connection events
- Create a User VPN configuration and associate it with the virtual hub User VPN gateway
- Select the appropriate Virtual WAN SKU before creating the required hubs
Explanation
Correct Answer
C:Create a User VPN configuration and associate it with the virtual hub User VPN gateway is the operational configuration for add a point-to-site user vpn gateway to the virtual wan hub. The acceptance test is to connect a pilot client and verify hub-connected VNet access.
Incorrect Answers
A:Set the RADIUS server IP/secret and ensure the gateway can reach the service is a concrete step for configure radius authentication for the supported p2s gateway setup. Here the selected design is add a point-to-site user vpn gateway to the virtual wan hub, which instead requires create a user vpn configuration and associate it with the virtual hub user vpn gateway.
B:Enable gateway diagnostic categories and review connection events is a concrete step for use vpn gateway diagnostic logs and tunnel metrics. Here the selected design is add a point-to-site user vpn gateway to the virtual wan hub, which instead requires create a user vpn configuration and associate it with the virtual hub user vpn gateway.
D:Select the appropriate Virtual WAN SKU before creating the required hubs is a concrete step for assess basic virtual wan capability versus standard feature needs. Here the selected design is add a point-to-site user vpn gateway to the virtual wan hub, which instead requires create a user vpn configuration and associate it with the virtual hub user vpn gateway.
Question 475
Remote employees need user VPN access through the managed global WAN. After the team applies this change—create a User VPN configuration and associate it with the virtual hub User VPN gateway—which validation best proves the intended result?
- Trace traffic through the NVA and verify supported hub route entries
- Inspect new IKE association source and confirm the connection becomes Connected
- Test auto-connect after sign-in or network transition
- Connect a pilot client and verify hub-connected VNet access
Explanation
Correct Answer
D:Connect a pilot client and verify hub-connected VNet access directly checks whether the intended outcome occurs, not merely whether a resource exists. If the check fails, investigate whether user VPN gateway or client authentication configuration is incomplete.
Incorrect Answers
A:Trace traffic through the NVA and verify supported hub route entries. This concerns a third-party network virtual appliance inserted into virtual wan traffic paths. Instead, connect a pilot client and verify hub-connected VNet access.
B:Inspect new IKE association source and confirm the connection becomes Connected. This is relevant when a company is moving its site-to-site tunnel to a different on-premises public address. Instead, connect a pilot client and verify hub-connected VNet access.
C:Test auto-connect after sign-in or network transition. This concerns connecting automatically to corporate resources when policy requires. Instead, connect a pilot client and verify hub-connected VNet access.
Question 476
Remote employees need user VPN access through the managed global WAN. During acceptance testing, remote devices cannot establish an Azure virtual WAN VPN session. Which underlying configuration problem best explains the symptom?
- The IPsec traffic selector configuration does not include them
- User VPN gateway or client authentication configuration is incomplete
- The gateway cannot reach the RADIUS endpoint or the shared secret differs
- P2S client pool overlaps local or enterprise address space
Explanation
Correct Answer
B:User VPN gateway or client authentication configuration is incomplete explains the observed failure: remote devices cannot establish an Azure virtual WAN VPN session. Correct the design by using add a point-to-site User VPN gateway to the Virtual WAN hub, implemented through create a User VPN configuration and associate it with the virtual hub User VPN gateway.
Incorrect Answers
A:The IPsec traffic selector configuration does not include them. This concerns a legacy on-premises IPSEC device only supports policy-based traffic selectors. Here, user VPN gateway or client authentication configuration is incomplete.
C:The gateway cannot reach the RADIUS endpoint or the shared secret differs. This concerns a central radius service to validate users. Here, user VPN gateway or client authentication configuration is incomplete.
D:P2S client pool overlaps local or enterprise address space. This concerns p2s vpn clients receive addresses overlapping their home office lan. Here, user VPN gateway or client authentication configuration is incomplete.
Question 477
A business requires private ExpressRoute access to its global Virtual WAN topology. Which Azure networking design most directly satisfies this requirement?
- Compare provider provisioning, Azure circuit state and BGP peering diagnostics
- Add an ExpressRoute gateway and circuit connection to an eligible virtual hub
- Add an encryption overlay where supported instead of assuming ExpressRoute is encrypted
- Use supported Virtual WAN NVA integration rather than an arbitrary subnet VM route
Explanation
Correct Answer
B:Add an ExpressRoute gateway and circuit connection to an eligible virtual hub addresses the topology, access or delivery requirement in the scenario. Apply it by create the virtual hub ExpressRoute gateway and attach the authorized circuit; confirm by inspect ExpressRoute connection status from the hub and reach target VNets.
Incorrect Answers
A:Compare provider provisioning, Azure circuit state and BGP peering diagnostics. This is relevant when a team is troubleshooting a circuit that is not passing traffic after handoff. Instead, add an ExpressRoute gateway and circuit connection to an eligible virtual hub.
C:Add an encryption overlay where supported instead of assuming ExpressRoute is encrypted. This is relevant when a private circuit but also requires cryptographic encryption in transit. Instead, add an ExpressRoute gateway and circuit connection to an eligible virtual hub.
D:Use supported Virtual WAN NVA integration rather than an arbitrary subnet VM route. This concerns a third-party network virtual appliance inserted into Virtual WAN traffic paths. Instead, add an ExpressRoute gateway and circuit connection to an eligible virtual hub.
Question 478
A business requires private ExpressRoute access to its global Virtual WAN topology. The architecture uses this design: Add an ExpressRoute gateway and circuit connection to an eligible virtual hub. Which configuration should the engineer apply to implement it?
- Change the local network gateway's gateway IP and coordinate remote settings
- Create the virtual hub ExpressRoute gateway and attach the authorized circuit
- Enable gateway diagnostic categories and review connection events
- Select the appropriate Virtual WAN SKU before creating the required hubs
Explanation
Correct Answer
B:Create the virtual hub ExpressRoute gateway and attach the authorized circuit is the operational configuration for add an expressroute gateway and circuit connection to an eligible virtual hub. The acceptance test is to inspect ExpressRoute connection status from the hub and reach target VNets.
Incorrect Answers
A:Change the local network gateway's gateway IP and coordinate remote settings is a concrete step for update the corresponding local network gateway public ip endpoint. Here the selected design is add an expressroute gateway and circuit connection to an eligible virtual hub, which instead requires create the virtual hub expressroute gateway and attach the authorized circuit.
C:Enable gateway diagnostic categories and review connection events is a concrete step for use vpn gateway diagnostic logs and tunnel metrics. Here the selected design is add an expressroute gateway and circuit connection to an eligible virtual hub, which instead requires create the virtual hub expressroute gateway and attach the authorized circuit.
D:Select the appropriate Virtual WAN SKU before creating the required hubs is a concrete step for assess basic virtual wan capability versus standard feature needs. Here the selected design is add an expressroute gateway and circuit connection to an eligible virtual hub, which instead requires create the virtual hub expressroute gateway and attach the authorized circuit.
Question 479
A business requires private ExpressRoute access to its global Virtual WAN topology. After the team applies this change—create the virtual hub ExpressRoute gateway and attach the authorized circuit—which validation best proves the intended result?
- Inspect ExpressRoute connection status from the hub and reach target VNets
- Inspect IKE negotiation diagnostics and re-establish the tunnel
- Bring down one BGP peer and inspect remaining reachability
- Inspect effective hub routes and simulate allowed and disallowed paths
Explanation
Correct Answer
A:Inspect ExpressRoute connection status from the hub and reach target VNets directly checks whether the intended outcome occurs, not merely whether a resource exists. If the check fails, investigate whether no ExpressRoute gateway-to-circuit connection exists in the hub.
Incorrect Answers
B:Inspect IKE negotiation diagnostics and re-establish the tunnel. This is relevant when a corporate IPSEC tunnel negotiation fails because peers support different cryptographic suites. Instead, inspect ExpressRoute connection status from the hub and reach target VNets.
C:Bring down one BGP peer and inspect remaining reachability. This concerns providing redundant paths through two independent peering sessions. Instead, inspect ExpressRoute connection status from the hub and reach target VNets.
D:Inspect effective hub routes and simulate allowed and disallowed paths. This concerns controlled inter-hub route propagation. Instead, inspect ExpressRoute connection status from the hub and reach target VNets.
Question 480
A business requires private ExpressRoute access to its global Virtual WAN topology. During acceptance testing, datacenter ExpressRoute traffic cannot enter the Virtual WAN. Which underlying configuration problem best explains the symptom?
- The circuit tier does not permit the requested geographic reach
- Private ExpressRoute transport alone does not provide encryption
- The gateway cannot reach the RADIUS endpoint or the shared secret differs
- No ExpressRoute gateway-to-circuit connection exists in the hub
Explanation
Correct Answer
D:No ExpressRoute gateway-to-circuit connection exists in the hub explains the observed failure: datacenter ExpressRoute traffic cannot enter the Virtual WAN. Correct the design by using add an ExpressRoute gateway and circuit connection to an eligible virtual hub, implemented through create the virtual hub ExpressRoute gateway and attach the authorized circuit.
Incorrect Answers
A:The circuit tier does not permit the requested geographic reach. This concerns expressroute connectivity between distant geopolitical regions. Here, no ExpressRoute gateway-to-circuit connection exists in the hub.
B:Private ExpressRoute transport alone does not provide encryption. This is relevant when a private circuit but also requires cryptographic encryption in transit. Here, no ExpressRoute gateway-to-circuit connection exists in the hub.
C:The gateway cannot reach the RADIUS endpoint or the shared secret differs. This concerns a central radius service to validate users. Here, no ExpressRoute gateway-to-circuit connection exists in the hub.
Designing and Implementing Microsoft Azure Networking Solutions (AZ-700) Practice Tests