100% Latest & Updated Microsoft AZ-700 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!
Question 810
A fleet of web VMs should be referenced by application role rather than static IP lists in NSG rules. The architecture uses this design: Use Azure Application Security Groups for logical VM grouping. Which configuration should the engineer apply to implement it?
- Associate NSG to resource subnet and define explicit allowed traffic profiles
- Create a geo-filter custom rule associated with the API security policy
- Configure relevant WAF policy request body rules and precise exclusions
- Associate each VM NIC with an ASG and reference ASGs in NSG rules
Explanation
Correct Answer
D:Associate each VM NIC with an ASG and reference ASGs in NSG rules is the operational configuration for use azure application security groups for logical vm grouping. The acceptance test is to scale out the web tier and check allowed flows for new ASG members.
Incorrect Answers
A:Associate NSG to resource subnet and define explicit allowed traffic profiles is a concrete step for apply nsg controls at the appropriate subnet or nic boundary. Here the selected design is use azure application security groups for logical vm grouping, which instead requires associate each vm nic with an asg and reference asgs in nsg rules.
B:Create a geo-filter custom rule associated with the API security policy is a concrete step for apply an appropriate front door waf geo-match custom rule. Here the selected design is use azure application security groups for logical vm grouping, which instead requires associate each vm nic with an asg and reference asgs in nsg rules.
C:Configure relevant WAF policy request body rules and precise exclusions is a concrete step for review waf request body inspection and size settings within supported limits. Here the selected design is use azure application security groups for logical vm grouping, which instead requires associate each vm nic with an asg and reference asgs in nsg rules.
Question 811
A fleet of web VMs should be referenced by application role rather than static IP lists in NSG rules. After the team applies this change—associate each VM NIC with an ASG and reference ASGs in NSG rules—which validation best proves the intended result?
- Test allowed website access and a blocked unlisted FQDN
- Check enabled capabilities and traffic throughput against accepted scope
- Test desired east-west flows and blocked unauthorized connections
- Scale out the web tier and check allowed flows for new ASG members
Explanation
Correct Answer
D:Scale out the web tier and check allowed flows for new ASG members directly checks whether the intended outcome occurs, not merely whether a resource exists. If the check fails, investigate whether their NICs were not associated with the correct ASG.
Incorrect Answers
A:Test allowed website access and a blocked unlisted FQDN. This concerns application-aware fqdn filtering for outbound http and HTTPS. Here, scale out the web tier and check allowed flows for new ASG members.
B:Check enabled capabilities and traffic throughput against accepted scope. This concerns baseline network filtering at lowest suitable azure firewall tier. Here, scale out the web tier and check allowed flows for new ASG members.
C:Test desired east-west flows and blocked unauthorized connections. This concerns occur inside an azure VNet. Here, scale out the web tier and check allowed flows for new ASG members.
Question 812
A fleet of web VMs should be referenced by application role rather than static IP lists in NSG rules. During acceptance testing, new web VMs are denied despite matching role. Which underlying configuration problem best explains the symptom?
- Relevant Firewall diagnostic categories were not enabled
- Only HTTP-oriented application rules were configured
- Their NICs were not associated with the correct ASG
- Their subnet default route does not point at the firewall
Explanation
Correct Answer
C:Their NICs were not associated with the correct ASG explains the observed failure: new web VMs are denied despite matching role. Correct the design by using use Azure Application Security Groups for logical VM grouping, implemented through associate each VM NIC with an ASG and reference ASGs in NSG rules.
Incorrect Answers
A:Relevant Firewall diagnostic categories were not enabled. This concerns comparing logs from application, network and dnat firewall rules in one place. Here, their NICs were not associated with the correct ASG.
B:Only HTTP-oriented application rules were configured. This concerns filtering non-http tcp traffic by ip, protocol and destination port. Here, their NICs were not associated with the correct ASG.
D:Their subnet default route does not point at the firewall. This concerns central stateful egress inspection across several spoke vnets. Here, their NICs were not associated with the correct ASG.
Question 813
A network administrator adds an allow rule but packets are still blocked by a subnet NSG. Which Azure networking design most directly satisfies this requirement?
- Create the required AzureFirewallSubnet with supported dimensions
- Inspect effective NSG rules on both NIC and subnet with rule priorities
- Reference an Application Security Group in network security rules
- Use WAF rate limiting custom rules where available
Explanation
Correct Answer
B:Inspect effective NSG rules on both NIC and subnet with rule priorities addresses the topology, access or delivery requirement in the scenario. Apply it by check effective security rules and identify the first matching priority for the flow; confirm by use IP flow verify to report the denying rule.
Incorrect Answers
A:Create the required AzureFirewallSubnet with supported dimensions. This concerns Azure Firewall deployment fails because the hub lacks its reserved platform subnet. Instead, inspect effective NSG rules on both NIC and subnet with rule priorities.
C:Reference an Application Security Group in network security rules. This concerns identifying a group of app servers in a single VNet independent of IP churn. Instead, inspect effective NSG rules on both NIC and subnet with rule priorities.
D:Use WAF rate limiting custom rules where available. This concerns an emergency rule to reduce high request rate from a single source. Instead, inspect effective NSG rules on both NIC and subnet with rule priorities.
Question 814
A network administrator adds an allow rule but packets are still blocked by a subnet NSG. The architecture uses this design: Inspect effective NSG rules on both NIC and subnet with rule priorities. Which configuration should the engineer apply to implement it?
- Set exclusion scope and match variables on relevant managed rules
- Associate each VM NIC with an ASG and reference ASGs in NSG rules
- Check effective security rules and identify the first matching priority for the flow
- Identify the rule ID and add a scoped exception after analysis
Explanation
Correct Answer
C:Check effective security rules and identify the first matching priority for the flow is the operational configuration for inspect effective nsg rules on both nic and subnet with rule priorities. The acceptance test is to use IP flow verify to report the denying rule.
Incorrect Answers
A:Set exclusion scope and match variables on relevant managed rules is a concrete step for configure a narrowly scoped waf exclusion for the matching field. Here the selected design is inspect effective nsg rules on both nic and subnet with rule priorities, which instead requires check effective security rules and identify the first matching priority for the flow.
B:Associate each VM NIC with an ASG and reference ASGs in NSG rules is a concrete step for use azure application security groups for logical vm grouping. Here the selected design is inspect effective nsg rules on both nic and subnet with rule priorities, which instead requires check effective security rules and identify the first matching priority for the flow.
D:Identify the rule ID and add a scoped exception after analysis is a concrete step for review waf logs and tune only the specific triggered rule/exclusion. Here the selected design is inspect effective nsg rules on both nic and subnet with rule priorities, which instead requires check effective security rules and identify the first matching priority for the flow.
Question 815
A network administrator adds an allow rule but packets are still blocked by a subnet NSG. After the team applies this change—check effective security rules and identify the first matching priority for the flow—which validation best proves the intended result?
- Query example matches from all rule types and correlate timestamps
- Use IP flow verify to report the denying rule
- Inspect effective security rules and verify enforced org-wide policy
- Verify spokes' effective routes and inspect firewall logs for outbound flows
Explanation
Correct Answer
B:Use IP flow verify to report the denying rule directly checks whether the intended outcome occurs, not merely whether a resource exists. If the check fails, investigate whether a higher-priority deny rule matches first.
Incorrect Answers
A:Query example matches from all rule types and correlate timestamps. This concerns comparing logs from application, network and dnat firewall rules in one place. Instead, use IP flow verify to report the denying rule.
C:Inspect effective security rules and verify enforced org-wide policy. This concerns enforcing consistent baseline security controls across many vnets. Instead, use IP flow verify to report the denying rule.
D:Verify spokes' effective routes and inspect firewall logs for outbound flows. This concerns central stateful egress inspection across several spoke vnets. Instead, use IP flow verify to report the denying rule.
Question 816
A network administrator adds an allow rule but packets are still blocked by a subnet NSG. During acceptance testing, the chosen allow rule never takes effect. Which underlying configuration problem best explains the symptom?
- Threat intelligence mode remains Alert instead of Alert and deny
- The custom path-match rule is missing or not enabled
- A higher-priority deny rule matches first
- An overly broad wildcard or allow-all application rule exists
Explanation
Correct Answer
C:A higher-priority deny rule matches first explains the observed failure: the chosen allow rule never takes effect. Correct the design by using inspect effective NSG rules on both NIC and subnet with rule priorities, implemented through check effective security rules and identify the first matching priority for the flow.
Incorrect Answers
A:Threat intelligence mode remains Alert instead of Alert and deny. This concerns mitigate high-risk traffic based on microsoft's current intelligence feeds. Here, a higher-priority deny rule matches first.
B:The custom path-match rule is missing or not enabled. This concerns rejecting suspicious request paths before origin processing. Here, a higher-priority deny rule matches first.
D:An overly broad wildcard or allow-all application rule exists. This concerns allowing *.example.org without opening all internet domains. Here, a higher-priority deny rule matches first.
Question 817
An operations team needs to group RDP admin endpoints without assigning public IPs to application VMs. Which Azure networking design most directly satisfies this requirement?
- Inspect effective NSG rules on both NIC and subnet with rule priorities
- Use Azure Firewall network rules rather than HTTP application rules
- Evaluate Azure Firewall Basic against required workload features
- Use Azure Bastion with tight NSG management controls
Explanation
Correct Answer
D:Use Azure Bastion with tight NSG management controls addresses the topology, access or delivery requirement in the scenario. Apply it by deploy Bastion in AzureBastionSubnet and remove unnecessary VM public IPs; confirm by open RDP through Bastion and verify direct public RDP is unavailable.
Incorrect Answers
A:Inspect effective NSG rules on both NIC and subnet with rule priorities. This concerns a network administrator adds an allow rule but packets are still blocked by a subnet NSG. Instead, use Azure Bastion with tight NSG management controls.
B:Use Azure Firewall network rules rather than HTTP application rules. This concerns filtering non-HTTP TCP traffic by IP, protocol and destination port. Instead, use Azure Bastion with tight NSG management controls.
C:Evaluate Azure Firewall Basic against required workload features. This concerns baseline network filtering at lowest suitable Azure Firewall tier. Instead, use Azure Bastion with tight NSG management controls.
Question 818
An operations team needs to group RDP admin endpoints without assigning public IPs to application VMs. The architecture uses this design: Use Azure Bastion with tight NSG management controls. Which configuration should the engineer apply to implement it?
- Deploy a managed firewall through Azure Firewall Manager and set routing intent
- Deploy supported Premium SKU and configure required threat inspection policy
- Create security admin configurations and deploy them to intended network groups
- Deploy Bastion in AzureBastionSubnet and remove unnecessary VM public IPs
Explanation
Correct Answer
D:Deploy Bastion in AzureBastionSubnet and remove unnecessary VM public IPs is the operational configuration for use azure bastion with tight nsg management controls. The acceptance test is to open RDP through Bastion and verify direct public RDP is unavailable.
Incorrect Answers
A:Deploy a managed firewall through Azure Firewall Manager and set routing intent is a concrete step for use azure firewall in a secured virtual hub. Here the selected design is use azure bastion with tight nsg management controls, which instead requires deploy bastion in azurebastionsubnet and remove unnecessary vm public ips.
B:Deploy supported Premium SKU and configure required threat inspection policy is a concrete step for select azure firewall premium for advanced inspection needs. Here the selected design is use azure bastion with tight nsg management controls, which instead requires deploy bastion in azurebastionsubnet and remove unnecessary vm public ips.
C:Create security admin configurations and deploy them to intended network groups is a concrete step for use azure virtual network manager security admin rules. Here the selected design is use azure bastion with tight nsg management controls, which instead requires deploy bastion in azurebastionsubnet and remove unnecessary vm public ips.
Question 819
An operations team needs to group RDP admin endpoints without assigning public IPs to application VMs. After the team applies this change—deploy Bastion in AzureBastionSubnet and remove unnecessary VM public IPs—which validation best proves the intended result?
- Replace an app VM and confirm it inherits intended rules through ASG membership
- Verify branch and VNet internet traffic appears in firewall diagnostics
- Open RDP through Bastion and verify direct public RDP is unavailable
- Verify spokes' effective routes and inspect firewall logs for outbound flows
Explanation
Correct Answer
C:Open RDP through Bastion and verify direct public RDP is unavailable directly checks whether the intended outcome occurs, not merely whether a resource exists. If the check fails, investigate whether azure Bastion or its required subnet/access configuration is absent.
Incorrect Answers
A:Replace an app VM and confirm it inherits intended rules through ASG membership. This concerns identifying a group of app servers in a single VNet independent of ip churn. Instead, open RDP through Bastion and verify direct public RDP is unavailable.
B:Verify branch and VNet internet traffic appears in firewall diagnostics. This concerns centralized internet filtering for all connected branches. Instead, open RDP through Bastion and verify direct public RDP is unavailable.
D:Verify spokes' effective routes and inspect firewall logs for outbound flows. This concerns central stateful egress inspection across several spoke vnets. Instead, open RDP through Bastion and verify direct public RDP is unavailable.
Question 820
An operations team needs to group RDP admin endpoints without assigning public IPs to application VMs. During acceptance testing, administrators can only RDP by exposing each VM publicly. Which underlying configuration problem best explains the symptom?
- Azure Bastion or its required subnet/access configuration is absent
- The DNAT translation or destination routing is missing
- Rate limiting policy is absent or threshold too high
- Their subnet default route does not point at the firewall
Explanation
Correct Answer
A:Azure Bastion or its required subnet/access configuration is absent explains the observed failure: administrators can only RDP by exposing each VM publicly. Correct the design by using use Azure Bastion with tight NSG management controls, implemented through deploy Bastion in AzureBastionSubnet and remove unnecessary VM public IPs.
Incorrect Answers
B:The DNAT translation or destination routing is missing. This concerns inbound access through a fixed public ip. The requested service or concept is Azure Bastion or its required subnet/access configuration is absent.
C:Rate limiting policy is absent or threshold too high. This concerns an emergency rule to reduce high request rate from a single source. The requested service or concept is Azure Bastion or its required subnet/access configuration is absent.
D:Their subnet default route does not point at the firewall. This concerns central stateful egress inspection across several spoke vnets. The requested service or concept is Azure Bastion or its required subnet/access configuration is absent.
Designing and Implementing Microsoft Azure Networking Solutions (AZ-700) Practice Tests