100% Latest & Updated Microsoft AZ-801 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!
Question 230
A failover cluster resource is created without a dependency on the network name and disk resources needed by the application. Which Windows Server or Azure operation best addresses the reported fault?
- Deploy the appropriate clustered application role and storage dependencies for SQL service failover.
- Use a Cluster Shared Volume namespace or appropriate clustered disk resource rather than per-node drive-letter assumptions.
- Verify the workload suitability and select a conventional clustered file server if the client workload does not fit SoFS design.
- Configure the clustered role's resource dependencies and test offline/online ordering.
Explanation
Correct Answer
D:Dependency graphs determine resource startup order and prevent applications from starting without required services. A suitable corrective action is to configure the clustered role's resource dependencies and test offline/online ordering.
Incorrect Answers
A:SoFS provides storage access; it does not itself instantiate or control a clustered database engine role. However, dependency graphs determine resource startup order and prevent applications from starting without required services.
B:CSV provides a consistent path accessible through the cluster namespace. Here, dependency graphs determine resource startup order and prevent applications from starting without required services.
C:Scale-Out File Server is optimized for continuously available application SMB workloads, not all general-purpose file services. In this situation, dependency graphs determine resource startup order and prevent applications from starting without required services.
Question 231
A storage cluster's RDMA traffic suffers packet loss after a switch replacement using RoCE, while ordinary TCP flows remain stable. What should the administrator change first to correct this specific issue?
- Validate RoCE lossless Ethernet settings, traffic prioritization and supported switch configuration.
- Align the server and switch VLAN/trunk tagging for the intended storage network.
- Upgrade to a supported high-bandwidth cluster network before enabling production storage traffic.
- Treat host NIC resiliency and authenticated/secured storage transport as separate design requirements.
Explanation
Correct Answer
A:RoCE performance depends on consistent network QoS/PFC behavior for low-loss traffic. The targeted remedy is to validate RoCE lossless Ethernet settings, traffic prioritization and supported switch configuration.
Incorrect Answers
B:Layer 2 tagging mismatch prevents storage traffic even when link LEDs show physical connectivity. In this situation, roCE performance depends on consistent network QoS/PFC behavior for low-loss traffic.
C:S2D replication and SMB storage paths require low latency and sufficient throughput, commonly 10-GbE or higher. However, roCE performance depends on consistent network QoS/PFC behavior for low-loss traffic.
D:Link teaming addresses availability while IPsec or SMB security addresses authenticated traffic. Here, roCE performance depends on consistent network QoS/PFC behavior for low-loss traffic.
Question 232
A Hyper-V host's dedicated heartbeat adapter is disabled after a NIC team change, and the cluster begins losing node membership. What is the best targeted remediation for the behavior described?
- Align the server and switch VLAN/trunk tagging for the intended storage network.
- Restore the intended cluster communication network and validate its role/metric.
- Validate redundant SMB-capable network paths and Multichannel behavior for the cluster design.
- Upgrade to a supported high-bandwidth cluster network before enabling production storage traffic.
Explanation
Correct Answer
B:Restore the intended cluster communication network and validate its role/metric. This addresses the condition because cluster heartbeats require usable network paths independent of VM guest access.
Incorrect Answers
A:Layer 2 tagging mismatch prevents storage traffic even when link LEDs show physical connectivity. In this situation, cluster heartbeats require usable network paths independent of VM guest access.
C:SMB Multichannel can use multiple available interfaces and improve resilience when properly provisioned. Here, cluster heartbeats require usable network paths independent of VM guest access.
D:S2D replication and SMB storage paths require low latency and sufficient throughput, commonly 10-GbE or higher. In this situation, cluster heartbeats require usable network paths independent of VM guest access.
Question 233
A high-availability host uses one unteamed NIC for both critical management and cluster storage traffic, creating a single link failure point. Which implementation step directly corrects the underlying problem?
- Validate redundant SMB-capable network paths and Multichannel behavior for the cluster design.
- Correct the ATC network intent-to-physical adapter mapping and verify management reachability.
- Design supported redundant host networking with appropriate adapter assignment and failure testing.
- Cleanly reconcile adapter ownership and create a supported Network ATC intent matching available host ports.
Explanation
Correct Answer
C:Physical network redundancy is needed before software failover can tolerate a NIC outage. For that reason, design supported redundant host networking with appropriate adapter assignment and failure testing.
Incorrect Answers
A:SMB Multichannel can use multiple available interfaces and improve resilience when properly provisioned. However, physical network redundancy is needed before software failover can tolerate a NIC outage.
B:Declarative network intent must match the actual attached hardware and intended traffic roles. Here, physical network redundancy is needed before software failover can tolerate a NIC outage.
D:Network ATC manages host networking declaratively and conflicts with inconsistent manual preconfiguration. However, physical network redundancy is needed before software failover can tolerate a NIC outage.
Question 234
An S2D cluster is deployed with 1-GbE links despite a production requirement for high-bandwidth east-west storage traffic. Which configuration or recovery action best matches this evidence?
- Validate RoCE lossless Ethernet settings, traffic prioritization and supported switch configuration.
- Design supported redundant host networking with appropriate adapter assignment and failure testing.
- Restore the intended cluster communication network and validate its role/metric.
- Upgrade to a supported high-bandwidth cluster network before enabling production storage traffic.
Explanation
Correct Answer
D:Upgrade to a supported high-bandwidth cluster network before enabling production storage traffic. The underlying technical reason is that s2D replication and SMB storage paths require low latency and sufficient throughput, commonly 10-GbE or higher.
Incorrect Answers
A:RoCE performance depends on consistent network QoS/PFC behavior for low-loss traffic. Here, S2D replication and SMB storage paths require low latency and sufficient throughput, commonly 10-GbE or higher.
B:Physical network redundancy is needed before software failover can tolerate a NIC outage. In this situation, S2D replication and SMB storage paths require low latency and sufficient throughput, commonly 10-GbE or higher.
C:Cluster heartbeats require usable network paths independent of VM guest access. However, S2D replication and SMB storage paths require low latency and sufficient throughput, commonly 10-GbE or higher.
Question 235
A Network ATC intent is assigned to adapters carrying incompatible existing virtual switch configuration, and deployment fails. What is the best targeted remediation for the behavior described?
- Cleanly reconcile adapter ownership and create a supported Network ATC intent matching available host ports.
- Correct the ATC network intent-to-physical adapter mapping and verify management reachability.
- Design supported redundant host networking with appropriate adapter assignment and failure testing.
- Treat host NIC resiliency and authenticated/secured storage transport as separate design requirements.
Explanation
Correct Answer
A:Network ATC manages host networking declaratively and conflicts with inconsistent manual preconfiguration. A suitable corrective action is to cleanly reconcile adapter ownership and create a supported Network ATC intent matching available host ports.
Incorrect Answers
B:Declarative network intent must match the actual attached hardware and intended traffic roles. However, network ATC manages host networking declaratively and conflicts with inconsistent manual preconfiguration.
C:Physical network redundancy is needed before software failover can tolerate a NIC outage. Here, network ATC manages host networking declaratively and conflicts with inconsistent manual preconfiguration.
D:Link teaming addresses availability while IPsec or SMB security addresses authenticated traffic. In this situation, network ATC manages host networking declaratively and conflicts with inconsistent manual preconfiguration.
Question 236
A cluster loses a storage NIC after a cable failure but SMB Multichannel was never configured or available on another path. Which Windows Server or Azure operation best addresses the reported fault?
- Design supported redundant host networking with appropriate adapter assignment and failure testing.
- Validate redundant SMB-capable network paths and Multichannel behavior for the cluster design.
- Restore the intended cluster communication network and validate its role/metric.
- Upgrade to a supported high-bandwidth cluster network before enabling production storage traffic.
Explanation
Correct Answer
B:SMB Multichannel can use multiple available interfaces and improve resilience when properly provisioned. The targeted remedy is to validate redundant SMB-capable network paths and Multichannel behavior for the cluster design.
Incorrect Answers
A:Physical network redundancy is needed before software failover can tolerate a NIC outage. However, SMB Multichannel can use multiple available interfaces and improve resilience when properly provisioned.
C:Cluster heartbeats require usable network paths independent of VM guest access. In this situation, SMB Multichannel can use multiple available interfaces and improve resilience when properly provisioned.
D:S2D replication and SMB storage paths require low latency and sufficient throughput, commonly 10-GbE or higher. However, SMB Multichannel can use multiple available interfaces and improve resilience when properly provisioned.
Question 237
An administrator applies a VLAN change to an RDMA storage adapter without making the corresponding switch-side VLAN change. What is the best targeted remediation for the behavior described?
- Restore the intended cluster communication network and validate its role/metric.
- Validate RoCE lossless Ethernet settings, traffic prioritization and supported switch configuration.
- Align the server and switch VLAN/trunk tagging for the intended storage network.
- Upgrade to a supported high-bandwidth cluster network before enabling production storage traffic.
Explanation
Correct Answer
C:Align the server and switch VLAN/trunk tagging for the intended storage network. This addresses the condition because layer 2 tagging mismatch prevents storage traffic even when link LEDs show physical connectivity.
Incorrect Answers
A:Cluster heartbeats require usable network paths independent of VM guest access. Here, layer 2 tagging mismatch prevents storage traffic even when link LEDs show physical connectivity.
B:RoCE performance depends on consistent network QoS/PFC behavior for low-loss traffic. In this situation, layer 2 tagging mismatch prevents storage traffic even when link LEDs show physical connectivity.
D:S2D replication and SMB storage paths require low latency and sufficient throughput, commonly 10-GbE or higher. Here, layer 2 tagging mismatch prevents storage traffic even when link LEDs show physical connectivity.
Question 238
A team enables switch independent teaming and assumes it guarantees IPsec authentication on storage network flows. Which configuration or recovery action best matches this evidence?
- Design supported redundant host networking with appropriate adapter assignment and failure testing.
- Cleanly reconcile adapter ownership and create a supported Network ATC intent matching available host ports.
- Align the server and switch VLAN/trunk tagging for the intended storage network.
- Treat host NIC resiliency and authenticated/secured storage transport as separate design requirements.
Explanation
Correct Answer
D:Link teaming addresses availability while IPsec or SMB security addresses authenticated traffic. For that reason, treat host NIC resiliency and authenticated/secured storage transport as separate design requirements.
Incorrect Answers
A:Physical network redundancy is needed before software failover can tolerate a NIC outage. In this situation, link teaming addresses availability while IPsec or SMB security addresses authenticated traffic.
B:Network ATC manages host networking declaratively and conflicts with inconsistent manual preconfiguration. However, link teaming addresses availability while IPsec or SMB security addresses authenticated traffic.
C:Layer 2 tagging mismatch prevents storage traffic even when link LEDs show physical connectivity. Here, link teaming addresses availability while IPsec or SMB security addresses authenticated traffic.
Question 239
A new site cluster uses Network ATC but its management intent is accidentally mapped to storage-only ports. Which configuration or recovery action best matches this evidence?
- Correct the ATC network intent-to-physical adapter mapping and verify management reachability.
- Cleanly reconcile adapter ownership and create a supported Network ATC intent matching available host ports.
- Design supported redundant host networking with appropriate adapter assignment and failure testing.
- Validate redundant SMB-capable network paths and Multichannel behavior for the cluster design.
Explanation
Correct Answer
A:Correct the ATC network intent-to-physical adapter mapping and verify management reachability. The underlying technical reason is that declarative network intent must match the actual attached hardware and intended traffic roles.
Incorrect Answers
B:Network ATC manages host networking declaratively and conflicts with inconsistent manual preconfiguration. Here, declarative network intent must match the actual attached hardware and intended traffic roles.
C:Physical network redundancy is needed before software failover can tolerate a NIC outage. In this situation, declarative network intent must match the actual attached hardware and intended traffic roles.
D:SMB Multichannel can use multiple available interfaces and improve resilience when properly provisioned. However, declarative network intent must match the actual attached hardware and intended traffic roles.
Question 240
A storage performance test uses average throughput only and misses intermittent latency spikes caused by congestion on shared uplinks. What would be the most defensible next action based on the observed symptoms?
- Upgrade to a supported high-bandwidth cluster network before enabling production storage traffic.
- Measure SMB latency, RDMA counters and competing traffic under realistic peak load.
- Validate RoCE lossless Ethernet settings, traffic prioritization and supported switch configuration.
- Correct the ATC network intent-to-physical adapter mapping and verify management reachability.
Explanation
Correct Answer
B:Tail latency and congestion counters reveal cluster storage bottlenecks hidden by average rates. A suitable corrective action is to measure SMB latency, RDMA counters and competing traffic under realistic peak load.
Incorrect Answers
A:S2D replication and SMB storage paths require low latency and sufficient throughput, commonly 10-GbE or higher. Here, tail latency and congestion counters reveal cluster storage bottlenecks hidden by average rates.
C:RoCE performance depends on consistent network QoS/PFC behavior for low-loss traffic. However, tail latency and congestion counters reveal cluster storage bottlenecks hidden by average rates.
D:Declarative network intent must match the actual attached hardware and intended traffic roles. Here, tail latency and congestion counters reveal cluster storage bottlenecks hidden by average rates.
Configuring Windows Server Hybrid Advanced Services (AZ-801) Practice Tests