100% Latest & Updated Microsoft SC-200 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!
Question 10
The SOC needs suspicious script execution blocked by Defender for Endpoint attack surface reduction controls on an initial pilot device group. The proposed configuration is: Configure the applicable Defender for Endpoint attack surface reduction rule in audit mode for pilot devices. Which operational step implements the chosen approach?
- Set incident-created conditions, ordering and assignment action in a Sentinel automation rule.
- Build a Logic Apps playbook with supported Sentinel incident trigger and authorized ITSM or Teams actions.
- Confirm the required Defender components, supported licensing and device or identity coverage before relying on disruption.
- Target the pilot group through the endpoint security policy and select Audit for the specific ASR rule.
Explanation
Correct Answer
D:Scoped audit collects decision evidence with less disruption than immediate block everywhere.
Incorrect Answers
A:The rule maps eligible incidents to the correct owner consistently. The scenario calls for piloting endpoint attack surface reduction rules, not that separate action.
B:Connected actions require the correct identity permissions and trigger schema. That addresses orchestrating cross-system Sentinel incident actions, not the stated need for piloting endpoint attack surface reduction rules.
C:Incomplete prerequisites prevent automated cross-domain response. That is relevant to using automatic attack disruption for a correlated attack, whereas this requirement concerns piloting endpoint attack surface reduction rules.
Question 11
The SOC needs suspicious script execution blocked by Defender for Endpoint attack surface reduction controls on an initial pilot device group. The security team selected: Configure the applicable Defender for Endpoint attack surface reduction rule in audit mode for pilot devices. What outcome would best validate the implementation?
- Inspect ASR audit events and validate expected scripts before switching eligible devices to Block.
- Replay known benign and malicious samples and confirm only the authorized activity is suppressed.
- Generate an authorized test investigation and verify the remediation remains pending approval for that group.
- Confirm the intended endpoint events appear from a pilot device in the expected investigation location.
Explanation
Correct Answer
A:Audit telemetry shows whether legitimate business workflows are affected.
Incorrect Answers
B:Both negative and positive controls reveal overbroad alert tuning. That is relevant to reducing known benign XDR alert noise, whereas this requirement concerns piloting endpoint attack surface reduction rules.
C:The test distinguishes alert generation from actual automated execution. It does not establish piloting endpoint attack surface reduction rules, which is the specific issue in this case.
D:A test proves both enrollment and actual telemetry coverage. The scenario calls for piloting endpoint attack surface reduction rules, not that separate action.
Question 12
The SOC needs suspicious script execution blocked by Defender for Endpoint attack surface reduction controls on an initial pilot device group. The control has been deployed. Which ongoing control best addresses the risk that the protection may become ineffective?
- Review suppression rule matches when script versions or administrator device scopes change.
- Monitor collection health and storage overhead after sensor and operating-system updates.
- Review applications requiring exceptions and keep any ASR exclusions as narrow as possible.
- Reevaluate ASR exclusions after applications or managed device membership change.
Explanation
Correct Answer
D:Outdated exclusions can weaken protection or disrupt software upgrades.
Incorrect Answers
A:A stale exception can unintentionally hide malicious activity. That is relevant to reducing known benign XDR alert noise, whereas this requirement concerns piloting endpoint attack surface reduction rules.
B:Collection gaps or excessive volume can make investigations unreliable. It does not establish piloting endpoint attack surface reduction rules, which is the specific issue in this case.
C:Broad exemptions can restore the same attack path the rule should block. The scenario calls for piloting endpoint attack surface reduction rules, not that separate action.
Question 13
An endpoint team needs Defender for Endpoint to collect extra device telemetry in a supported custom collection scenario. What should the administrator configure to address this exact situation?
- Configure the specific attack surface reduction rule that blocks Office applications from creating child processes where supported.
- Use Microsoft Defender XDR automatic attack disruption with the applicable protection prerequisites.
- Use Defender for Endpoint device group automation levels with approval for remediation where required.
- Enable the supported custom data collection capability for the required Defender for Endpoint evidence.
Explanation
Correct Answer
D:Custom collection must match available device and sensor capabilities.
Incorrect Answers
A:ASR rules prevent selected risky behavior rather than scheduling malware scans. It does not establish configuring targeted endpoint telemetry collection, which is the specific issue in this case.
B:Automatic disruption coordinates supported containment across correlated attack entities. The scenario calls for configuring targeted endpoint telemetry collection, not that separate action.
C:Device groups can separate fully automated response from actions that require approval. That addresses governing automated remediation on sensitive servers, not the stated need for configuring targeted endpoint telemetry collection.
Question 14
An endpoint team needs Defender for Endpoint to collect extra device telemetry in a supported custom collection scenario. The control design uses: Enable the supported custom data collection capability for the required Defender for Endpoint evidence. Which operational step implements the chosen approach?
- Define supported collection settings and the exact device scope before deployment.
- Pilot the rule, inspect audit events and then enforce Block on eligible device groups.
- Choose the supported event table and rule frequency and configure the alert and entity fields.
- Select the threat analytics notification category instead of a general incident severity rule.
Explanation
Correct Answer
A:Targeting controls volume and sensitivity of additional endpoint evidence.
Incorrect Answers
B:Staged enforcement reduces interference with legitimate macros and integrations. That addresses enforcing one Defender for Endpoint ASR behavior, not the stated need for configuring targeted endpoint telemetry collection.
C:A production rule requires the needed event context for attribution. That is relevant to creating a Defender XDR custom detection, whereas this requirement concerns configuring targeted endpoint telemetry collection.
D:A category-specific subscription avoids routing unrelated incidents. It does not establish configuring targeted endpoint telemetry collection, which is the specific issue in this case.
Question 15
An endpoint team needs Defender for Endpoint to collect extra device telemetry in a supported custom collection scenario. The control being evaluated is: Enable the supported custom data collection capability for the required Defender for Endpoint evidence. Which TWO actions together implement this solution and verify the desired outcome? Choose TWO.
- Confirm the intended endpoint events appear from a pilot device in the expected investigation location.
- Configure the specific attack surface reduction rule that blocks Office applications from creating child processes where supported.
- Select the threat analytics notification category instead of a general incident severity rule.
- Run the playbook on a test incident and confirm one ticket and one correctly populated notification.
- Define supported collection settings and the exact device scope before deployment.
Explanation
Correct Answers
A:A test proves both enrollment and actual telemetry coverage.
E:Targeting controls volume and sensitivity of additional endpoint evidence.
Incorrect Answers
B:ASR rules prevent selected risky behavior rather than scheduling malware scans. That is relevant to enforcing one Defender for Endpoint ASR behavior, whereas this requirement concerns configuring targeted endpoint telemetry collection.
C:A category-specific subscription avoids routing unrelated incidents. It does not establish configuring targeted endpoint telemetry collection, which is the specific issue in this case.
D:End-to-end tests catch connector failures and repeated actions. The scenario calls for configuring targeted endpoint telemetry collection, not that separate action.
Question 16
An endpoint team needs Defender for Endpoint to collect extra device telemetry in a supported custom collection scenario. Six months after deployment, the system has changed. Which ongoing control best addresses the risk that the protection may become ineffective?
- Review recipient membership when intelligence ownership shifts between SOC teams.
- Monitor collection health and storage overhead after sensor and operating-system updates.
- Recheck playbook resource-group access after moving playbooks or changing resource ownership.
- Monitor hit rates and tune the query when legitimate administration command lines change.
Explanation
Correct Answer
B:Collection gaps or excessive volume can make investigations unreliable.
Incorrect Answers
A:Outdated distribution lists reduce the utility of threat intelligence updates. That is relevant to subscribing to XDR threat intelligence notification updates, whereas this requirement concerns configuring targeted endpoint telemetry collection.
C:Moved or newly scoped Logic Apps can break automation authorization. The scenario calls for configuring targeted endpoint telemetry collection, not that separate action.
D:New tooling can increase false positives and hide high-value events. That addresses creating a Defender XDR custom detection, not the stated need for configuring targeted endpoint telemetry collection.
Question 17
Defender XDR automated investigation has evaluated a malicious file, and policy requires review before remediation on a sensitive server group. What should the administrator configure to address this exact situation?
- Enable the supported custom data collection capability for the required Defender for Endpoint evidence.
- Tune the relevant Defender XDR detection or alert suppression configuration narrowly to the approved activity.
- Use Defender for Endpoint device group automation levels with approval for remediation where required.
- Configure the applicable Defender for Endpoint attack surface reduction rule in audit mode for pilot devices.
Explanation
Correct Answer
C:Device groups can separate fully automated response from actions that require approval.
Incorrect Answers
A:Custom collection must match available device and sensor capabilities. It does not establish governing automated remediation on sensitive servers, which is the specific issue in this case.
B:A bounded suppression prevents repeated known noise without silencing other malicious behavior. The scenario calls for governing automated remediation on sensitive servers, not that separate action.
D:Audit-first deployment shows the effects of the rule before broad blocking. That is relevant to piloting endpoint attack surface reduction rules, whereas this requirement concerns governing automated remediation on sensitive servers.
Question 18
Defender XDR automated investigation has evaluated a malicious file, and policy requires review before remediation on a sensitive server group. The planned solution is: Use Defender for Endpoint device group automation levels with approval for remediation where required. Which operational step implements the chosen approach?
- Define supported collection settings and the exact device scope before deployment.
- Pilot the rule, inspect audit events and then enforce Block on eligible device groups.
- Place sensitive servers in a scoped group with the chosen automation level and appropriate permissions.
- Target the pilot group through the endpoint security policy and select Audit for the specific ASR rule.
Explanation
Correct Answer
C:A controlled level determines whether proposed remediation waits for a responder.
Incorrect Answers
A:Targeting controls volume and sensitivity of additional endpoint evidence. The scenario calls for governing automated remediation on sensitive servers, not that separate action.
B:Staged enforcement reduces interference with legitimate macros and integrations. That addresses enforcing one Defender for Endpoint ASR behavior, not the stated need for governing automated remediation on sensitive servers.
D:Scoped audit collects decision evidence with less disruption than immediate block everywhere. It does not establish governing automated remediation on sensitive servers, which is the specific issue in this case.
Question 19
Defender XDR automated investigation has evaluated a malicious file, and policy requires review before remediation on a sensitive server group. The deployed approach is: Use Defender for Endpoint device group automation levels with approval for remediation where required. What outcome would best validate the implementation?
- Inspect the incident action history for supported automatic containment of the affected device or identity.
- Inspect ASR audit events and validate expected scripts before switching eligible devices to Block.
- Generate an authorized test investigation and verify the remediation remains pending approval for that group.
- Confirm the intended endpoint events appear from a pilot device in the expected investigation location.
Explanation
Correct Answer
C:The test distinguishes alert generation from actual automated execution.
Incorrect Answers
A:Evidence should show an actual automated action, not simply an alert. That addresses using automatic attack disruption for a correlated attack, not the stated need for governing automated remediation on sensitive servers.
B:Audit telemetry shows whether legitimate business workflows are affected. That is relevant to piloting endpoint attack surface reduction rules, whereas this requirement concerns governing automated remediation on sensitive servers.
D:A test proves both enrollment and actual telemetry coverage. The scenario calls for governing automated remediation on sensitive servers, not that separate action.
Question 20
Defender XDR automated investigation has evaluated a malicious file, and policy requires review before remediation on a sensitive server group. The control is active. Which ongoing control best addresses the risk that the protection may become ineffective?
- Audit device group membership and approvals after server onboarding or SOC role changes.
- Monitor Logic Apps run history and rotate expired connector credentials proactively.
- Monitor hit rates and tune the query when legitimate administration command lines change.
- Recheck playbook resource-group access after moving playbooks or changing resource ownership.
Explanation
Correct Answer
A:A misplaced server can receive unintended automated remediation.
Incorrect Answers
B:Automation can silently stop when integrations lose authorization. It does not establish governing automated remediation on sensitive servers, which is the specific issue in this case.
C:New tooling can increase false positives and hide high-value events. The scenario calls for governing automated remediation on sensitive servers, not that separate action.
D:Moved or newly scoped Logic Apps can break automation authorization. That addresses granting Sentinel permission to run a playbook, not the stated need for governing automated remediation on sensitive servers.
Microsoft Security Operations Analyst (SC-200) Practice Tests