100% Latest & Updated Network Appliance NS0-165 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!
Question 560
One of two iSCSI initiator sessions cannot authenticate because the mutual CHAP identities differ between host and target. Choose TWO measures that together implement and verify a suitable solution for this ONTAP storage-administration situation. (Choose TWO.)
- Implement supported Fibre Channel zoning with precisely scoped initiator and target WWPN connectivity.
- Review initiator login diagnostics and verify only the authorized session authenticates with the expected target.
- Maintain documented recovery runbooks for break, restore, and resynchronization paths.
- Measure replication lag and verify a controlled source change reaches the destination within the expected window.
- Check the supported CHAP mode, initiator and target identities, and synchronized secrets without disabling authentication.
Explanation
Correct Answers
B:Review initiator login diagnostics and verify only the authorized session authenticates with the expected target.
E:Check the supported CHAP mode, initiator and target identities, and synchronized secrets without disabling authentication. Bypassing CHAP to resolve login failures can expose block storage to unauthorized initiators.
Incorrect Answers
A:Implement supported Fibre Channel zoning with precisely scoped initiator and target WWPN connectivity.
C:Maintain documented recovery runbooks for break, restore, and resynchronization paths. It tests destination volume access and writable restore semantics, not iscsi chap authentication troubleshooting.
D:Measure replication lag and verify a controlled source change reaches the destination within the expected window. It tests asynchronous snapmirror replication and rpo choice, not iscsi chap authentication troubleshooting.
Question 561
After an HBA replacement, one FC path disappears because the new initiator WWPN was never added to the zone and igroup. Which design choice most directly meets the stated requirement?
- Use correct initiator groups and supported LUN mapping for only authorized FC or iSCSI hosts.
- Configure supported iSCSI target service, storage data LIFs and host initiator paths with appropriate network isolation.
- Trace FC initiator discovery through fabric zoning, target login, ONTAP igroup membership and LUN map in that order.
- Implement supported Fibre Channel zoning with precisely scoped initiator and target WWPN connectivity.
Explanation
Correct Answer
C:Trace FC initiator discovery through fabric zoning, target login, ONTAP igroup membership and LUN map in that order. SAN presentation is a chain of fabric visibility and storage authorization, so a failure at either layer hides the device. A missed WWPN update can reduce SAN redundancy or make a critical LUN vanish during maintenance.
Incorrect Answers
A:Use correct initiator groups and supported LUN mapping for only authorized FC or iSCSI hosts. SAN presentation is a chain of fabric visibility and storage authorization, so a failure at either layer hides the device.
B:Configure supported iSCSI target service, storage data LIFs and host initiator paths with appropriate network isolation. SAN presentation is a chain of fabric visibility and storage authorization, so a failure at either layer hides the device.
D:Implement supported Fibre Channel zoning with precisely scoped initiator and target WWPN connectivity. SAN presentation is a chain of fabric visibility and storage authorization, so a failure at either layer hides the device.
Question 562
After an HBA replacement, one FC path disappears because the new initiator WWPN was never added to the zone and igroup. Which evidence would BEST validate the intended outcome?
- Rescan a representative host and verify fabric login, target discovery, and expected LUN path count.
- Run NVMe discovery and connect operations and verify namespace identification and redundant path handling on the host.
- Check igroup membership, LUN mapping IDs and host multipath discovery while testing denial from an unrelated initiator.
- Compare WWPNs and target sessions from both fabrics and verify host device discovery and stable multipath states.
Explanation
Correct Answer
D:Compare WWPNs and target sessions from both fabrics and verify host device discovery and stable multipath states. SAN presentation is a chain of fabric visibility and storage authorization, so a failure at either layer hides the device.
Incorrect Answers
A:Rescan a representative host and verify fabric login, target discovery, and expected LUN path count. It tests fibre channel fabric zoning for ontap luns, not fibre channel wwpn path discovery and lun visibility.
B:Run NVMe discovery and connect operations and verify namespace identification and redundant path handling on the host. It tests nvme over tcp namespace provisioning, not fibre channel wwpn path discovery and lun visibility.
C:Check igroup membership, LUN mapping IDs and host multipath discovery while testing denial from an unrelated initiator.
Question 563
After an HBA replacement, one FC path disappears because the new initiator WWPN was never added to the zone and igroup. What is the principal technical reason for the problem?
- FC zoning controls which fabric endpoints can communicate before ONTAP LUN mapping determines which blocks are exposed.
- SAN presentation is a chain of fabric visibility and storage authorization, so a failure at either layer hides the device.
- S3 authorization is governed by object identities and bucket policies, not by NAS export or SAN igroup permissions.
- NFS authorization occurs at mount and file-access layers, so network success does not imply permission success.
Explanation
Correct Answer
B:SAN presentation is a chain of fabric visibility and storage authorization, so a failure at either layer hides the device. A missed WWPN update can reduce SAN redundancy or make a critical LUN vanish during maintenance.
Incorrect Answers
A:FC zoning controls which fabric endpoints can communicate before ONTAP LUN mapping determines which blocks are exposed. This explains fibre channel fabric zoning for ontap luns; it does not describe the limiting mechanism in fibre channel wwpn path discovery and lun visibility presented by the scenario.
C:S3 authorization is governed by object identities and bucket policies, not by NAS export or SAN igroup permissions. This explains ontap s3 bucket permissions and object access; it does not describe the limiting mechanism in fibre channel wwpn path discovery and lun visibility presented by the scenario.
D:NFS authorization occurs at mount and file-access layers, so network success does not imply permission success. This explains nfs mount denied by export and file permissions; it does not describe the limiting mechanism in fibre channel wwpn path discovery and lun visibility presented by the scenario.
Question 564
After an HBA replacement, one FC path disappears because the new initiator WWPN was never added to the zone and igroup. What control should remain in place after implementing the fix?
- Audit object keys and bucket policies when workloads or SVM users change.
- Periodically reconcile igroup membership and LUN maps against the actual host inventory.
- Retest client and SMB share capabilities after server or storage upgrades.
- Reconcile HBA identifiers and zoning after every adapter or switch replacement.
Explanation
Correct Answer
D:Reconcile HBA identifiers and zoning after every adapter or switch replacement. A missed WWPN update can reduce SAN redundancy or make a critical LUN vanish during maintenance.
Incorrect Answers
A:Audit object keys and bucket policies when workloads or SVM users change. It tests ontap s3 bucket permissions and object access, not fibre channel wwpn path discovery and lun visibility.
B:Periodically reconcile igroup membership and LUN maps against the actual host inventory. It tests lun mapping with igroups and least exposure, not fibre channel wwpn path discovery and lun visibility.
C:Retest client and SMB share capabilities after server or storage upgrades. It tests smb continuous availability for application shares, not fibre channel wwpn path discovery and lun visibility.
Question 565
After an HBA replacement, one FC path disappears because the new initiator WWPN was never added to the zone and igroup. Which result would BEST describe the business or technical exposure?
- A missed WWPN update can reduce SAN redundancy or make a critical LUN vanish during maintenance.
- Incorrect zoning can hide critical LUNs or create unnecessarily broad SAN access.
- Insufficient iSCSI paths can create host downtime during routine controller or network maintenance.
- A mismatch in NFS protocol or identity handling can break mounts and invalidate file-level access controls.
Explanation
Correct Answer
A:A missed WWPN update can reduce SAN redundancy or make a critical LUN vanish during maintenance. This is a directly relevant trust, availability, cost, privacy, or data-quality consequence of fibre channel wwpn path discovery and lun visibility. Underlying mechanism: SAN presentation is a chain of fabric visibility and storage authorization, so a failure at either layer hides the device.
Incorrect Answers
B:Incorrect zoning can hide critical LUNs or create unnecessarily broad SAN access.
C:Insufficient iSCSI paths can create host downtime during routine controller or network maintenance.
D:A mismatch in NFS protocol or identity handling can break mounts and invalidate file-level access controls.
Question 566
A SAN administrator rescans disks repeatedly although target port login is absent on one fabric after a switch refresh. Which change should the team prioritize for this specific ONTAP workload?
- Trace FC initiator discovery through fabric zoning, target login, ONTAP igroup membership and LUN map in that order.
- Configure supported iSCSI target service, storage data LIFs and host initiator paths with appropriate network isolation.
- Use correct initiator groups and supported LUN mapping for only authorized FC or iSCSI hosts.
- Implement supported Fibre Channel zoning with precisely scoped initiator and target WWPN connectivity.
Explanation
Correct Answer
A:Trace FC initiator discovery through fabric zoning, target login, ONTAP igroup membership and LUN map in that order. SAN presentation is a chain of fabric visibility and storage authorization, so a failure at either layer hides the device. A missed WWPN update can reduce SAN redundancy or make a critical LUN vanish during maintenance.
Incorrect Answers
B:Configure supported iSCSI target service, storage data LIFs and host initiator paths with appropriate network isolation. SAN presentation is a chain of fabric visibility and storage authorization, so a failure at either layer hides the device.
C:Use correct initiator groups and supported LUN mapping for only authorized FC or iSCSI hosts. SAN presentation is a chain of fabric visibility and storage authorization, so a failure at either layer hides the device.
D:Implement supported Fibre Channel zoning with precisely scoped initiator and target WWPN connectivity. SAN presentation is a chain of fabric visibility and storage authorization, so a failure at either layer hides the device.
Question 567
A SAN administrator rescans disks repeatedly although target port login is absent on one fabric after a switch refresh. Which test would most directly confirm the solution?
- Compare WWPNs and target sessions from both fabrics and verify host device discovery and stable multipath states.
- Run NVMe discovery and connect operations and verify namespace identification and redundant path handling on the host.
- Check igroup membership, LUN mapping IDs and host multipath discovery while testing denial from an unrelated initiator.
- Rescan a representative host and verify fabric login, target discovery, and expected LUN path count.
Explanation
Correct Answer
A:Compare WWPNs and target sessions from both fabrics and verify host device discovery and stable multipath states. SAN presentation is a chain of fabric visibility and storage authorization, so a failure at either layer hides the device.
Incorrect Answers
B:Run NVMe discovery and connect operations and verify namespace identification and redundant path handling on the host. It tests nvme over tcp namespace provisioning, not fibre channel wwpn path discovery and lun visibility.
C:Check igroup membership, LUN mapping IDs and host multipath discovery while testing denial from an unrelated initiator.
D:Rescan a representative host and verify fabric login, target discovery, and expected LUN path count. It tests fibre channel fabric zoning for ontap luns, not fibre channel wwpn path discovery and lun visibility.
Question 568
A SAN administrator rescans disks repeatedly although target port login is absent on one fabric after a switch refresh. Why is the original assumption unreliable?
- FC zoning controls which fabric endpoints can communicate before ONTAP LUN mapping determines which blocks are exposed.
- NFS authorization occurs at mount and file-access layers, so network success does not imply permission success.
- S3 authorization is governed by object identities and bucket policies, not by NAS export or SAN igroup permissions.
- SAN presentation is a chain of fabric visibility and storage authorization, so a failure at either layer hides the device.
Explanation
Correct Answer
D:SAN presentation is a chain of fabric visibility and storage authorization, so a failure at either layer hides the device. A missed WWPN update can reduce SAN redundancy or make a critical LUN vanish during maintenance.
Incorrect Answers
A:FC zoning controls which fabric endpoints can communicate before ONTAP LUN mapping determines which blocks are exposed. This explains fibre channel fabric zoning for ontap luns; it does not describe the limiting mechanism in fibre channel wwpn path discovery and lun visibility presented by the scenario.
B:NFS authorization occurs at mount and file-access layers, so network success does not imply permission success. This explains nfs mount denied by export and file permissions; it does not describe the limiting mechanism in fibre channel wwpn path discovery and lun visibility presented by the scenario.
C:S3 authorization is governed by object identities and bucket policies, not by NAS export or SAN igroup permissions. This explains ontap s3 bucket permissions and object access; it does not describe the limiting mechanism in fibre channel wwpn path discovery and lun visibility presented by the scenario.
Question 569
A SAN administrator rescans disks repeatedly although target port login is absent on one fabric after a switch refresh. What control should remain in place after implementing the fix?
- Retest client and SMB share capabilities after server or storage upgrades.
- Periodically reconcile igroup membership and LUN maps against the actual host inventory.
- Audit object keys and bucket policies when workloads or SVM users change.
- Reconcile HBA identifiers and zoning after every adapter or switch replacement.
Explanation
Correct Answer
D:Reconcile HBA identifiers and zoning after every adapter or switch replacement. A missed WWPN update can reduce SAN redundancy or make a critical LUN vanish during maintenance.
Incorrect Answers
A:Retest client and SMB share capabilities after server or storage upgrades. It tests smb continuous availability for application shares, not fibre channel wwpn path discovery and lun visibility.
B:Periodically reconcile igroup membership and LUN maps against the actual host inventory. It tests lun mapping with igroups and least exposure, not fibre channel wwpn path discovery and lun visibility.
C:Audit object keys and bucket policies when workloads or SVM users change. It tests ontap s3 bucket permissions and object access, not fibre channel wwpn path discovery and lun visibility.
Question 570
A SAN administrator rescans disks repeatedly although target port login is absent on one fabric after a switch refresh. Which result would BEST describe the business or technical exposure?
- Insufficient iSCSI paths can create host downtime during routine controller or network maintenance.
- Incorrect zoning can hide critical LUNs or create unnecessarily broad SAN access.
- A mismatch in NFS protocol or identity handling can break mounts and invalidate file-level access controls.
- A missed WWPN update can reduce SAN redundancy or make a critical LUN vanish during maintenance.
Explanation
Correct Answer
D:A missed WWPN update can reduce SAN redundancy or make a critical LUN vanish during maintenance. This is a directly relevant trust, availability, cost, privacy, or data-quality consequence of fibre channel wwpn path discovery and lun visibility. Underlying mechanism: SAN presentation is a chain of fabric visibility and storage authorization, so a failure at either layer hides the device.
Incorrect Answers
A:Insufficient iSCSI paths can create host downtime during routine controller or network maintenance.
B:Incorrect zoning can hide critical LUNs or create unnecessarily broad SAN access.
C:A mismatch in NFS protocol or identity handling can break mounts and invalidate file-level access controls.
NetApp Certified Data Administrator, ONTAP (NS0-165) Practice Tests