100% Latest & Updated Network Appliance NS0-165 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!
Question 770
A team assumes SnapMirror active sync handles every NAS and SAN workload identically without checking supported protocols. Which adverse outcome is the MOST direct risk if the issue persists?
- Sparse or mismanaged snapshots can leave unrecoverable data gaps or exhaust available storage capacity.
- Misapplied synchronous protection can create false zero-RPO expectations or application I/O interruption.
- A full DR destination can stop protection updates and invalidate the last recoverable point.
- Improperly activated destinations can leave applications read-only or destroy the intended recovery baseline.
Explanation
Correct Answer
B:Misapplied synchronous protection can create false zero-RPO expectations or application I/O interruption. This is a directly relevant trust, availability, cost, privacy, or data-quality consequence of snapmirror active sync business continuity for san. Underlying mechanism: Active synchronous protection for supported SAN workloads has different host, mediator and consistency requirements from asynchronous replication.
Incorrect Answers
A:Sparse or mismanaged snapshots can leave unrecoverable data gaps or exhaust available storage capacity.
C:A full DR destination can stop protection updates and invalidate the last recoverable point. It tests destination capacity exhaustion during snapmirror updates, not snapmirror active sync business continuity for san and produces a different.
D:Improperly activated destinations can leave applications read-only or destroy the intended recovery baseline.
Question 771
A planning document says a service is highly available but never defines the maximum acceptable outage and data loss. What is the MOST appropriate solution under these constraints?
- Identify and preserve supported common snapshots or choose the documented rebaseline and recovery method before resync.
- Define a supported ONTAP Snapshot schedule and retention policy aligned with recovery point and capacity requirements.
- Translate business continuity needs into measurable RTO and RPO and select the correct ONTAP protection and application recovery design.
- Select supported ONTAP-to-cloud protection mechanisms and confirm credentials, object repository compatibility and recovery requirements.
Explanation
Correct Answer
C:Translate business continuity needs into measurable RTO and RPO and select the correct ONTAP protection and application recovery design. RTO and RPO describe different consequences, so data replication frequency alone cannot demonstrate operational recovery time. Undefined recovery targets allow systems to appear protected yet fail the business when an actual disaster occurs.
Incorrect Answers
A:Identify and preserve supported common snapshots or choose the documented rebaseline and recovery method before resync. RTO and RPO describe different consequences, so data replication frequency alone cannot demonstrate operational recovery time.
B:Define a supported ONTAP Snapshot schedule and retention policy aligned with recovery point and capacity requirements. RTO and RPO describe different consequences, so data replication frequency alone cannot demonstrate operational recovery time.
D:Select supported ONTAP-to-cloud protection mechanisms and confirm credentials, object repository compatibility and recovery requirements. RTO and RPO describe different consequences, so data replication frequency alone cannot demonstrate operational recovery time.
Question 772
A planning document says a service is highly available but never defines the maximum acceptable outage and data loss. What observable result would establish that the requirement is met?
- Restore a controlled multi-volume transaction and verify application integrity rather than checking only volume mountability.
- Time an authorized recovery exercise and compare recovered data currency and application readiness with agreed objectives.
- Run a bounded backup and restore to the approved cloud destination and compare the resulting volume data and access permissions.
- Inspect scheduled snapshot timestamps and restore a controlled file from the oldest required recovery point.
Explanation
Correct Answer
B:Time an authorized recovery exercise and compare recovered data currency and application readiness with agreed objectives. RTO and RPO describe different consequences, so data replication frequency alone cannot demonstrate operational recovery time.
Incorrect Answers
A:Restore a controlled multi-volume transaction and verify application integrity rather than checking only volume mountability.
C:Run a bounded backup and restore to the approved cloud destination and compare the resulting volume data and access permissions. It tests snapmirror cloud and external backup boundary choices, not recovery time and recovery point objectives in dr policy.
D:Inspect scheduled snapshot timestamps and restore a controlled file from the oldest required recovery point.
Question 773
A planning document says a service is highly available but never defines the maximum acceptable outage and data loss. Which underlying distinction BEST explains this failure?
- Replication destinations require physical capacity for incoming data and retained copies even when source volumes are healthy.
- Asynchronous replication copies changed data after a scheduled or triggered interval, so source and destination can differ.
- Recovering data alone is insufficient when an application also depends on an SVM namespace, logical interfaces and protocol identity.
- RTO and RPO describe different consequences, so data replication frequency alone cannot demonstrate operational recovery time.
Explanation
Correct Answer
D:RTO and RPO describe different consequences, so data replication frequency alone cannot demonstrate operational recovery time. Undefined recovery targets allow systems to appear protected yet fail the business when an actual disaster occurs.
Incorrect Answers
A:Replication destinations require physical capacity for incoming data and retained copies even when source volumes are healthy. This explains destination capacity exhaustion during snapmirror updates; it does not describe the limiting mechanism in recovery time and recovery point objectives in dr policy presented by the scenario.
B:Asynchronous replication copies changed data after a scheduled or triggered interval, so source and destination can differ. This explains asynchronous snapmirror replication and rpo choice; it does not describe the limiting mechanism in recovery time and recovery point objectives in dr policy presented by the scenario.
C:Recovering data alone is insufficient when an application also depends on an SVM namespace, logical interfaces and protocol identity. This explains snapmirror svm dr and application namespace recovery; it does not describe the limiting mechanism in recovery time and recovery point objectives in dr policy presented by the scenario.
Question 774
A planning document says a service is highly available but never defines the maximum acceptable outage and data loss. What control should remain in place after implementing the fix?
- Maintain documented recovery runbooks for break, restore, and resynchronization paths.
- Revalidate SVM DR readiness after tenant, domain, or protocol changes.
- Track measured DR results and revise architecture when recovery tests exceed business tolerances.
- Protect required replication baseline snapshots during cleanup and DR activation workflows.
Explanation
Correct Answer
C:Track measured DR results and revise architecture when recovery tests exceed business tolerances. Undefined recovery targets allow systems to appear protected yet fail the business when an actual disaster occurs.
Incorrect Answers
A:Maintain documented recovery runbooks for break, restore, and resynchronization paths.
B:Revalidate SVM DR readiness after tenant, domain, or protocol changes. It tests snapmirror svm dr and application namespace recovery, not recovery time and recovery point objectives in dr policy.
D:Protect required replication baseline snapshots during cleanup and DR activation workflows.
Question 775
A planning document says a service is highly available but never defines the maximum acceptable outage and data loss. Which result would BEST describe the business or technical exposure?
- An overly slow replication schedule can lose more recent transactions than the organization has approved.
- Undefined recovery targets allow systems to appear protected yet fail the business when an actual disaster occurs.
- Improperly activated destinations can leave applications read-only or destroy the intended recovery baseline.
- A seemingly successful object upload may fail to provide a recoverable ONTAP data set during a disaster.
Explanation
Correct Answer
B:Undefined recovery targets allow systems to appear protected yet fail the business when an actual disaster occurs. This is a directly relevant trust, availability, cost, privacy, or data-quality consequence of recovery time and recovery point objectives in dr policy. Underlying mechanism: RTO and RPO describe different consequences, so data replication frequency alone cannot demonstrate operational recovery time.
Incorrect Answers
A:An overly slow replication schedule can lose more recent transactions than the organization has approved. It tests asynchronous snapmirror replication and rpo choice, not recovery time and recovery point objectives in dr policy and produces a different.
C:Improperly activated destinations can leave applications read-only or destroy the intended recovery baseline. It tests destination volume access and writable restore semantics, not recovery time and recovery point objectives in dr policy and produces a different.
D:A seemingly successful object upload may fail to provide a recoverable ONTAP data set during a disaster. It tests snapmirror cloud and external backup boundary choices, not recovery time and recovery point objectives in dr policy and produces a different.
Question 776
A business owner expects instant recovery while the only tested DR runbook requires hours of DNS changes and data validation. What infrastructure or software action BEST resolves the stated issue?
- Define a supported ONTAP Snapshot schedule and retention policy aligned with recovery point and capacity requirements.
- Translate business continuity needs into measurable RTO and RPO and select the correct ONTAP protection and application recovery design.
- Select supported ONTAP-to-cloud protection mechanisms and confirm credentials, object repository compatibility and recovery requirements.
- Configure supported asynchronous SnapMirror relationships with update frequency and policy aligned to the approved RPO.
Explanation
Correct Answer
B:Translate business continuity needs into measurable RTO and RPO and select the correct ONTAP protection and application recovery design. RTO and RPO describe different consequences, so data replication frequency alone cannot demonstrate operational recovery time. Undefined recovery targets allow systems to appear protected yet fail the business when an actual disaster occurs.
Incorrect Answers
A:Define a supported ONTAP Snapshot schedule and retention policy aligned with recovery point and capacity requirements. RTO and RPO describe different consequences, so data replication frequency alone cannot demonstrate operational recovery time.
C:Select supported ONTAP-to-cloud protection mechanisms and confirm credentials, object repository compatibility and recovery requirements. RTO and RPO describe different consequences, so data replication frequency alone cannot demonstrate operational recovery time.
D:Configure supported asynchronous SnapMirror relationships with update frequency and policy aligned to the approved RPO. RTO and RPO describe different consequences, so data replication frequency alone cannot demonstrate operational recovery time.
Question 777
A business owner expects instant recovery while the only tested DR runbook requires hours of DNS changes and data validation. How should the team verify that the corrective action works?
- Run a bounded backup and restore to the approved cloud destination and compare the resulting volume data and access permissions.
- Restore a controlled multi-volume transaction and verify application integrity rather than checking only volume mountability.
- Inspect scheduled snapshot timestamps and restore a controlled file from the oldest required recovery point.
- Time an authorized recovery exercise and compare recovered data currency and application readiness with agreed objectives.
Explanation
Correct Answer
D:Time an authorized recovery exercise and compare recovered data currency and application readiness with agreed objectives. RTO and RPO describe different consequences, so data replication frequency alone cannot demonstrate operational recovery time.
Incorrect Answers
A:Run a bounded backup and restore to the approved cloud destination and compare the resulting volume data and access permissions. It tests snapmirror cloud and external backup boundary choices, not recovery time and recovery point objectives in dr policy.
B:Restore a controlled multi-volume transaction and verify application integrity rather than checking only volume mountability.
C:Inspect scheduled snapshot timestamps and restore a controlled file from the oldest required recovery point.
Question 778
A business owner expects instant recovery while the only tested DR runbook requires hours of DNS changes and data validation. Which concept is MOST relevant to the stated conditions?
- Replication destinations require physical capacity for incoming data and retained copies even when source volumes are healthy.
- Recovering data alone is insufficient when an application also depends on an SVM namespace, logical interfaces and protocol identity.
- RTO and RPO describe different consequences, so data replication frequency alone cannot demonstrate operational recovery time.
- Asynchronous replication copies changed data after a scheduled or triggered interval, so source and destination can differ.
Explanation
Correct Answer
C:RTO and RPO describe different consequences, so data replication frequency alone cannot demonstrate operational recovery time. Undefined recovery targets allow systems to appear protected yet fail the business when an actual disaster occurs.
Incorrect Answers
A:Replication destinations require physical capacity for incoming data and retained copies even when source volumes are healthy. This explains destination capacity exhaustion during snapmirror updates; it does not describe the limiting mechanism in recovery time and recovery point objectives in dr policy presented by the scenario.
B:Recovering data alone is insufficient when an application also depends on an SVM namespace, logical interfaces and protocol identity. This explains snapmirror svm dr and application namespace recovery; it does not describe the limiting mechanism in recovery time and recovery point objectives in dr policy presented by the scenario.
D:Asynchronous replication copies changed data after a scheduled or triggered interval, so source and destination can differ. This explains asynchronous snapmirror replication and rpo choice; it does not describe the limiting mechanism in recovery time and recovery point objectives in dr policy presented by the scenario.
Question 779
A business owner expects instant recovery while the only tested DR runbook requires hours of DNS changes and data validation. What control should remain in place after implementing the fix?
- Maintain documented recovery runbooks for break, restore, and resynchronization paths.
- Protect required replication baseline snapshots during cleanup and DR activation workflows.
- Revalidate SVM DR readiness after tenant, domain, or protocol changes.
- Track measured DR results and revise architecture when recovery tests exceed business tolerances.
Explanation
Correct Answer
D:Track measured DR results and revise architecture when recovery tests exceed business tolerances. Undefined recovery targets allow systems to appear protected yet fail the business when an actual disaster occurs.
Incorrect Answers
A:Maintain documented recovery runbooks for break, restore, and resynchronization paths.
B:Protect required replication baseline snapshots during cleanup and DR activation workflows.
C:Revalidate SVM DR readiness after tenant, domain, or protocol changes. It tests snapmirror svm dr and application namespace recovery, not recovery time and recovery point objectives in dr policy.
Question 780
A business owner expects instant recovery while the only tested DR runbook requires hours of DNS changes and data validation. Choose TWO measures that together implement and verify a suitable solution for this ONTAP storage-administration situation. (Choose TWO.)
- Inspect physical block allocation and data-reduction statistics while benchmarking the actual application profile.
- Evaluate supported MetroCluster configuration and switchover requirements against business site-failure recovery objectives.
- Time an authorized recovery exercise and compare recovered data currency and application readiness with agreed objectives.
- Translate business continuity needs into measurable RTO and RPO and select the correct ONTAP protection and application recovery design.
- Document the cloud-provider and administrator responsibility matrix for updates, access, backups, and recovery tests.
Explanation
Correct Answers
C:Time an authorized recovery exercise and compare recovered data currency and application readiness with agreed objectives. RTO and RPO describe different consequences, so data replication frequency alone cannot demonstrate operational recovery time.
D:Translate business continuity needs into measurable RTO and RPO and select the correct ONTAP protection and application recovery design. RTO and RPO describe different consequences, so data replication frequency alone cannot demonstrate operational recovery time. Undefined recovery targets allow systems to appear protected yet fail the business when an actual disaster occurs.
Incorrect Answers
A:Inspect physical block allocation and data-reduction statistics while benchmarking the actual application profile. It tests compaction and small-block storage efficiency behavior, not recovery time and recovery point objectives in dr policy.
B:Evaluate supported MetroCluster configuration and switchover requirements against business site-failure recovery objectives. RTO and RPO describe different consequences, so data replication frequency alone cannot demonstrate operational recovery time.
E:Document the cloud-provider and administrator responsibility matrix for updates, access, backups, and recovery tests. It tests amazon fsx for ontap managed-service responsibility, not recovery time and recovery point objectives in dr policy.
NetApp Certified Data Administrator, ONTAP (NS0-165) Practice Tests