100% Latest & Updated Palo Alto Networks NetSec-Architect Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!
Question 1
For North America regional bank, which is the most directly supported architectural control for user-id based least privilege? The security architecture board of North America regional bank is preparing a new Zero Trust Enterprise program. The stakeholders have given the following specific requirement: An app security rule is tied to a NATed office subnet, so privileged contractors are treated like employees when using the same egress IP. No existing change is being reverted; select the most directly justified architecture for this stated requirement.
- For North America regional bank: Use discovered Device-ID attributes and approved device profiles in scoped security rules, with the required Device Security entitlement.
- For North America regional bank: Place suitable virtual firewall inspection and granular workload policies at the east-west communication boundary.
- For North America regional bank: Restrict application access with App-ID and app-specific policy, preserving required dependencies and decryption considerations.
- For North America regional bank: Build policy around authenticated User-ID group membership for the sensitive app, with a documented mapping and restricted fallback.
Explanation
Correct Answer
D:This directly addresses the recorded gap: An app security rule is tied to a NATed office subnet, so privileged contractors are treated like employees when using the same egress IP. The architectural control is Build policy around authenticated User-ID group membership for the sensitive app, with a documented mapping and restricted fallback. The decisive test is Test an authorized employee and a contractor from the same address pool while examining identity-mapped security logs. The objective is Only the approved identity group can reach the app, irrespective of the shared source address. Case R152-C001; angle 1; architecture design; option considered: Build policy around authenticated User-ID group membership for the sensitive app, with a documented mapping and restricted fallback.
Incorrect Answers
A:This option addresses a different design objective: Device-ID controls for unmanaged systems, not the primary control for user-id based least privilege. It would be relevant where A hospital device has a rotating IP lease and firewall rules based on old IP addresses cannot reliably constrain its traffic. Here the necessary evidence is Test an authorized employee and a contractor from the same address pool while examining identity-mapped security logs. Case R152-C001; angle 1; architecture design; option considered: Use discovered Device-ID attributes and approved device profiles in scoped security rules, with the required Device Security entitlement.
B:This option addresses a different design objective: Microsegmentation for workloads, not the primary control for user-id based least privilege. It would be relevant where Workloads in one private cloud subnet communicate laterally without service-level restrictions, despite host-role differences. Here the necessary evidence is Test an authorized employee and a contractor from the same address pool while examining identity-mapped security logs. Case R152-C001; angle 1; architecture design; option considered: Place suitable virtual firewall inspection and granular workload policies at the east-west communication boundary.
C:This option addresses a different design objective: App-ID instead of port allow lists, not the primary control for user-id based least privilege. It would be relevant where The organization permits arbitrary HTTPS to an admin segment because the policy matches TCP 443 but not actual applications. Here the necessary evidence is Test an authorized employee and a contractor from the same address pool while examining identity-mapped security logs. Case R152-C001; angle 1; architecture design; option considered: Restrict application access with App-ID and app-specific policy, preserving required dependencies and decryption considerations.
Question 2
Which validation most directly demonstrates user-id based least privilege is correctly designed for North America regional bank? The security architecture board of North America regional bank is preparing a new Zero Trust Enterprise program. The stakeholders have given the following specific requirement: An app security rule is tied to a NATed office subnet, so privileged contractors are treated like employees when using the same egress IP. No existing change is being reverted; select the most directly justified architecture for this stated requirement.
- For North America regional bank: Test an authorized employee and a contractor from the same address pool while examining identity-mapped security logs.
- For North America regional bank: Deliver a controlled benign and known-test malicious sample through the authorized application path and inspect threat events.
- For North America regional bank: Exercise both the approved management application and an unrelated HTTPS application on the same port.
- For North America regional bank: Trace an approved supervisory flow and a blocked workstation-to-controller flow across the proposed zones.
Explanation
Correct Answer
A:This checks the relevant user-id based least privilege enforcement path rather than a distant symptom. Test an authorized employee and a contractor from the same address pool while examining identity-mapped security logs. The expected evidence is Only the approved identity group can reach the app, irrespective of the shared source address. Case R152-C001; angle 2; architecture design; option considered: Test an authorized employee and a contractor from the same address pool while examining identity-mapped security logs.
Incorrect Answers
B:This option addresses a different design objective: Threat inspection after allow decision, not the primary control for user-id based least privilege. It would be relevant where A justified outbound access rule passes malicious files because it has no threat prevention profile attached. Here the necessary evidence is Test an authorized employee and a contractor from the same address pool while examining identity-mapped security logs. Case R152-C001; angle 2; architecture design; option considered: Deliver a controlled benign and known-test malicious sample through the authorized application path and inspect threat events.
C:This option addresses a different design objective: App-ID instead of port allow lists, not the primary control for user-id based least privilege. It would be relevant where The organization permits arbitrary HTTPS to an admin segment because the policy matches TCP 443 but not actual applications. Here the necessary evidence is Test an authorized employee and a contractor from the same address pool while examining identity-mapped security logs. Case R152-C001; angle 2; architecture design; option considered: Exercise both the approved management application and an unrelated HTTPS application on the same port.
D:This option addresses a different design objective: Segmenting campus trust zones, not the primary control for user-id based least privilege. It would be relevant where A flat campus VLAN allows employee workstations to initiate unrestricted sessions toward the manufacturing control network. Here the necessary evidence is Test an authorized employee and a contractor from the same address pool while examining identity-mapped security logs. Case R152-C001; angle 2; architecture design; option considered: Trace an approved supervisory flow and a blocked workstation-to-controller flow across the proposed zones.
Question 3
Which design assumption should the architect REJECT when evaluating user-id based least privilege for North America regional bank? The security architecture board of North America regional bank is preparing a new Zero Trust Enterprise program. The stakeholders have given the following specific requirement: An app security rule is tied to a NATed office subnet, so privileged contractors are treated like employees when using the same egress IP. No existing change is being reverted; select the most directly justified architecture for this stated requirement.
- For North America regional bank: Test an authorized employee and a contractor from the same address pool while examining identity-mapped security logs.
- For North America regional bank: Only the approved identity group can reach the app, irrespective of the shared source address.
- For North America regional bank: Assume the NAT egress IP proves the user's authorization.
- For North America regional bank: Build policy around authenticated User-ID group membership for the sensitive app, with a documented mapping and restricted fallback.
Explanation
Correct Answer
C:Reject this assumption: Assume the NAT egress IP proves the user's authorization. It does not establish user-id based least privilege; the supported architecture is Build policy around authenticated User-ID group membership for the sensitive app, with a documented mapping and restricted fallback. Verify it by: Test an authorized employee and a contractor from the same address pool while examining identity-mapped security logs. Case R152-C001; angle 3; architecture design; option considered: Assume the NAT egress IP proves the user's authorization.
Incorrect Answers
A:This is a valid design/control/evidence statement in the specified case, not the assumption to reject. Test an authorized employee and a contractor from the same address pool while examining identity-mapped security logs. It is consistent with the required outcome: Only the approved identity group can reach the app, irrespective of the shared source address. Case R152-C001; angle 3; architecture design; option considered: Test an authorized employee and a contractor from the same address pool while examining identity-mapped security logs.
B:This is a valid design/control/evidence statement in the specified case, not the assumption to reject. Only the approved identity group can reach the app, irrespective of the shared source address. It is consistent with the required outcome: Only the approved identity group can reach the app, irrespective of the shared source address. Case R152-C001; angle 3; architecture design; option considered: Only the approved identity group can reach the app, irrespective of the shared source address.
D:This is a valid design/control/evidence statement in the specified case, not the assumption to reject. Build policy around authenticated User-ID group membership for the sensitive app, with a documented mapping and restricted fallback. It is consistent with the required outcome: Only the approved identity group can reach the app, irrespective of the shared source address. Case R152-C001; angle 3; architecture design; option considered: Build policy around authenticated User-ID group membership for the sensitive app, with a documented mapping and restricted fallback.
Question 4
Which measurable end state best satisfies the stated user-id based least privilege requirement for North America regional bank? The security architecture board of North America regional bank is preparing a new Zero Trust Enterprise program. The stakeholders have given the following specific requirement: An app security rule is tied to a NATed office subnet, so privileged contractors are treated like employees when using the same egress IP. No existing change is being reverted; select the most directly justified architecture for this stated requirement.
- For North America regional bank: The approved industrial application remains usable while unauthorized lateral movement crosses enforcement.
- For North America regional bank: Only the approved identity group can reach the app, irrespective of the shared source address.
- For North America regional bank: Authorized device classes retain appropriate access despite lease changes while other classes remain restricted.
- For North America regional bank: Architects can demonstrate continuous enforcement and find access-policy regressions.
Explanation
Correct Answer
B:The required result is only the approved identity group can reach the app, irrespective of the shared source address. Apply this control: Build policy around authenticated User-ID group membership for the sensitive app, with a documented mapping and restricted fallback. Verify with: Test an authorized employee and a contractor from the same address pool while examining identity-mapped security logs.
Incorrect Answers
A:This option addresses a different design objective: Segmenting campus trust zones, not the primary control for user-id based least privilege. It would be relevant where A flat campus VLAN allows employee workstations to initiate unrestricted sessions toward the manufacturing control network. Here the necessary evidence is Test an authorized employee and a contractor from the same address pool while examining identity-mapped security logs. Case R152-C001; angle 4; architecture design; option considered: The approved industrial application remains usable while unauthorized lateral movement crosses enforcement.
C:This option addresses a different design objective: Device-ID controls for unmanaged systems, not the primary control for user-id based least privilege. It would be relevant where A hospital device has a rotating IP lease and firewall rules based on old IP addresses cannot reliably constrain its traffic. Here the necessary evidence is Test an authorized employee and a contractor from the same address pool while examining identity-mapped security logs. Case R152-C001; angle 4; architecture design; option considered: Authorized device classes retain appropriate access despite lease changes while other classes remain restricted.
D:This option addresses a different design objective: Zero Trust control telemetry, not the primary control for user-id based least privilege. It would be relevant where A network segmentation rollout reports success without measuring blocked lateral attempts or policy misses. Here the necessary evidence is Test an authorized employee and a contractor from the same address pool while examining identity-mapped security logs. Case R152-C001; angle 4; architecture design; option considered: Architects can demonstrate continuous enforcement and find access-policy regressions.
Question 5
For Global pharmaceutical manufacturer, which is the most directly supported architectural control for user-id based least privilege? After Global pharmaceutical manufacturer completed a limited security transformation pilot, reviewers observed a control gap: An app security rule is tied to a NATed office subnet, so privileged contractors are treated like employees when using the same egress IP. The case assumes the affected flows and dependencies have been traced and all unrelated systems are functioning; choose the narrow design repair before wider deployment.
- For Global pharmaceutical manufacturer: Use discovered Device-ID attributes and approved device profiles in scoped security rules, with the required Device Security entitlement.
- For Global pharmaceutical manufacturer: Apply appropriate threat prevention and malware inspection profiles to allowed traffic, with visibility into encryption limitations.
- For Global pharmaceutical manufacturer: Include the applicable GlobalProtect HIP posture checks in least-privilege access design and define remediation for failed devices.
- For Global pharmaceutical manufacturer: Build policy around authenticated User-ID group membership for the sensitive app, with a documented mapping and restricted fallback.
Explanation
Correct Answer
D:This directly addresses the recorded gap: An app security rule is tied to a NATed office subnet, so privileged contractors are treated like employees when using the same egress IP. The architectural control is Build policy around authenticated User-ID group membership for the sensitive app, with a documented mapping and restricted fallback. The decisive test is Test an authorized employee and a contractor from the same address pool while examining identity-mapped security logs. The objective is Only the approved identity group can reach the app, irrespective of the shared source address. Case R152-C002; angle 1; post-pilot control gap; option considered: Build policy around authenticated User-ID group membership for the sensitive app, with a documented mapping and restricted fallback.
Incorrect Answers
A:This option addresses a different design objective: Device-ID controls for unmanaged systems, not the primary control for user-id based least privilege. It would be relevant where A hospital device has a rotating IP lease and firewall rules based on old IP addresses cannot reliably constrain its traffic. Here the necessary evidence is Test an authorized employee and a contractor from the same address pool while examining identity-mapped security logs. Case R152-C002; angle 1; post-pilot control gap; option considered: Use discovered Device-ID attributes and approved device profiles in scoped security rules, with the required Device Security entitlement.
B:This option addresses a different design objective: Threat inspection after allow decision, not the primary control for user-id based least privilege. It would be relevant where A justified outbound access rule passes malicious files because it has no threat prevention profile attached. Here the necessary evidence is Test an authorized employee and a contractor from the same address pool while examining identity-mapped security logs. Case R152-C002; angle 1; post-pilot control gap; option considered: Apply appropriate threat prevention and malware inspection profiles to allowed traffic, with visibility into encryption limitations.
C:This option addresses a different design objective: Endpoint HIP posture gating, not the primary control for user-id based least privilege. It would be relevant where Managed laptops and unpatched personal endpoints receive the same private-app privileges because health state is not considered. Here the necessary evidence is Test an authorized employee and a contractor from the same address pool while examining identity-mapped security logs. Case R152-C002; angle 1; post-pilot control gap; option considered: Include the applicable GlobalProtect HIP posture checks in least-privilege access design and define remediation for failed devices.
Question 6
Which validation most directly demonstrates user-id based least privilege is correctly designed for Global pharmaceutical manufacturer? After Global pharmaceutical manufacturer completed a limited security transformation pilot, reviewers observed a control gap: An app security rule is tied to a NATed office subnet, so privileged contractors are treated like employees when using the same egress IP. The case assumes the affected flows and dependencies have been traced and all unrelated systems are functioning; choose the narrow design repair before wider deployment.
- For Global pharmaceutical manufacturer: Replay labeled permitted and blocked test flows and verify timestamped logs and ownership for investigation.
- For Global pharmaceutical manufacturer: Test an authorized employee and a contractor from the same address pool while examining identity-mapped security logs.
- For Global pharmaceutical manufacturer: Exercise both the approved management application and an unrelated HTTPS application on the same port.
- For Global pharmaceutical manufacturer: Generate an approved app-to-database call and an unauthorized peer-to-database call across the microsegment.
Explanation
Correct Answer
B:This checks the relevant user-id based least privilege enforcement path rather than a distant symptom. Test an authorized employee and a contractor from the same address pool while examining identity-mapped security logs. The expected evidence is Only the approved identity group can reach the app, irrespective of the shared source address. Case R152-C002; angle 2; post-pilot control gap; option considered: Test an authorized employee and a contractor from the same address pool while examining identity-mapped security logs.
Incorrect Answers
A:This option addresses a different design objective: Zero Trust control telemetry, not the primary control for user-id based least privilege. It would be relevant where A network segmentation rollout reports success without measuring blocked lateral attempts or policy misses. Here the necessary evidence is Test an authorized employee and a contractor from the same address pool while examining identity-mapped security logs. Case R152-C002; angle 2; post-pilot control gap; option considered: Replay labeled permitted and blocked test flows and verify timestamped logs and ownership for investigation.
C:This option addresses a different design objective: App-ID instead of port allow lists, not the primary control for user-id based least privilege. It would be relevant where The organization permits arbitrary HTTPS to an admin segment because the policy matches TCP 443 but not actual applications. Here the necessary evidence is Test an authorized employee and a contractor from the same address pool while examining identity-mapped security logs. Case R152-C002; angle 2; post-pilot control gap; option considered: Exercise both the approved management application and an unrelated HTTPS application on the same port.
D:This option addresses a different design objective: Microsegmentation for workloads, not the primary control for user-id based least privilege. It would be relevant where Workloads in one private cloud subnet communicate laterally without service-level restrictions, despite host-role differences. Here the necessary evidence is Test an authorized employee and a contractor from the same address pool while examining identity-mapped security logs. Case R152-C002; angle 2; post-pilot control gap; option considered: Generate an approved app-to-database call and an unauthorized peer-to-database call across the microsegment.
Question 7
Which design assumption should the architect REJECT when evaluating user-id based least privilege for Global pharmaceutical manufacturer? After Global pharmaceutical manufacturer completed a limited security transformation pilot, reviewers observed a control gap: An app security rule is tied to a NATed office subnet, so privileged contractors are treated like employees when using the same egress IP. The case assumes the affected flows and dependencies have been traced and all unrelated systems are functioning; choose the narrow design repair before wider deployment.
- For Global pharmaceutical manufacturer: Assume the NAT egress IP proves the user's authorization.
- For Global pharmaceutical manufacturer: Test an authorized employee and a contractor from the same address pool while examining identity-mapped security logs.
- For Global pharmaceutical manufacturer: Only the approved identity group can reach the app, irrespective of the shared source address.
- For Global pharmaceutical manufacturer: Build policy around authenticated User-ID group membership for the sensitive app, with a documented mapping and restricted fallback.
Explanation
Correct Answer
A:Reject this assumption: Assume the NAT egress IP proves the user's authorization. It does not establish user-id based least privilege; the supported architecture is Build policy around authenticated User-ID group membership for the sensitive app, with a documented mapping and restricted fallback. Verify it by: Test an authorized employee and a contractor from the same address pool while examining identity-mapped security logs. Case R152-C002; angle 3; post-pilot control gap; option considered: Assume the NAT egress IP proves the user's authorization.
Incorrect Answers
B:This is a valid design/control/evidence statement in the specified case, not the assumption to reject. Test an authorized employee and a contractor from the same address pool while examining identity-mapped security logs. It is consistent with the required outcome: Only the approved identity group can reach the app, irrespective of the shared source address. Case R152-C002; angle 3; post-pilot control gap; option considered: Test an authorized employee and a contractor from the same address pool while examining identity-mapped security logs.
C:This is a valid design/control/evidence statement in the specified case, not the assumption to reject. Only the approved identity group can reach the app, irrespective of the shared source address. It is consistent with the required outcome: Only the approved identity group can reach the app, irrespective of the shared source address. Case R152-C002; angle 3; post-pilot control gap; option considered: Only the approved identity group can reach the app, irrespective of the shared source address.
D:This is a valid design/control/evidence statement in the specified case, not the assumption to reject. Build policy around authenticated User-ID group membership for the sensitive app, with a documented mapping and restricted fallback. It is consistent with the required outcome: Only the approved identity group can reach the app, irrespective of the shared source address. Case R152-C002; angle 3; post-pilot control gap; option considered: Build policy around authenticated User-ID group membership for the sensitive app, with a documented mapping and restricted fallback.
Question 8
Select TWO directly linked controls for Global pharmaceutical manufacturer: the architectural remedy and its decisive validation. After Global pharmaceutical manufacturer completed a limited security transformation pilot, reviewers observed a control gap: An app security rule is tied to a NATed office subnet, so privileged contractors are treated like employees when using the same egress IP. The case assumes the affected flows and dependencies have been traced and all unrelated systems are functioning; choose the narrow design repair before wider deployment.
- For Global pharmaceutical manufacturer: Build policy around authenticated User-ID group membership for the sensitive app, with a documented mapping and restricted fallback.
- For Global pharmaceutical manufacturer: Test an authorized employee and a contractor from the same address pool while examining identity-mapped security logs.
- For Global pharmaceutical manufacturer: Include the applicable GlobalProtect HIP posture checks in least-privilege access design and define remediation for failed devices.
- For Global pharmaceutical manufacturer: Exercise both the approved management application and an unrelated HTTPS application on the same port.
- For Global pharmaceutical manufacturer: Assume the NAT egress IP proves the user's authorization.
Explanation
Correct Answer
A:This directly addresses the recorded gap: An app security rule is tied to a NATed office subnet, so privileged contractors are treated like employees when using the same egress IP. The architectural control is Build policy around authenticated User-ID group membership for the sensitive app, with a documented mapping and restricted fallback. The decisive test is Test an authorized employee and a contractor from the same address pool while examining identity-mapped security logs. The objective is Only the approved identity group can reach the app, irrespective of the shared source address. Case R152-C002; angle 4; post-pilot control gap; option considered: Build policy around authenticated User-ID group membership for the sensitive app, with a documented mapping and restricted fallback.
B:This checks the relevant user-id based least privilege enforcement path rather than a distant symptom. Test an authorized employee and a contractor from the same address pool while examining identity-mapped security logs. The expected evidence is Only the approved identity group can reach the app, irrespective of the shared source address. Case R152-C002; angle 4; post-pilot control gap; option considered: Test an authorized employee and a contractor from the same address pool while examining identity-mapped security logs.
Incorrect Answers
C:This option addresses a different design objective: Endpoint HIP posture gating, not the primary control for user-id based least privilege. It would be relevant where Managed laptops and unpatched personal endpoints receive the same private-app privileges because health state is not considered. Here the necessary evidence is Test an authorized employee and a contractor from the same address pool while examining identity-mapped security logs. Case R152-C002; angle 4; post-pilot control gap; option considered: Include the applicable GlobalProtect HIP posture checks in least-privilege access design and define remediation for failed devices.
D:This option addresses a different design objective: App-ID instead of port allow lists, not the primary control for user-id based least privilege. It would be relevant where The organization permits arbitrary HTTPS to an admin segment because the policy matches TCP 443 but not actual applications. Here the necessary evidence is Test an authorized employee and a contractor from the same address pool while examining identity-mapped security logs. Case R152-C002; angle 4; post-pilot control gap; option considered: Exercise both the approved management application and an unrelated HTTPS application on the same port.
E:This is an unsafe or insufficient shortcut for user-id based least privilege: Assume the NAT egress IP proves the user's authorization. The scoped requirement instead calls for Build policy around authenticated User-ID group membership for the sensitive app, with a documented mapping and restricted fallback.
Question 9
For U.S. regional insurer, which is the most directly supported architectural control for endpoint hip posture gating? The security architecture board of U.S. regional insurer is preparing a new Zero Trust Enterprise program. The stakeholders have given the following specific requirement: Managed laptops and unpatched personal endpoints receive the same private-app privileges because health state is not considered. No existing change is being reverted; select the most directly justified architecture for this stated requirement.
- For U.S. regional insurer: Apply appropriate threat prevention and malware inspection profiles to allowed traffic, with visibility into encryption limitations.
- For U.S. regional insurer: Use discovered Device-ID attributes and approved device profiles in scoped security rules, with the required Device Security entitlement.
- For U.S. regional insurer: Include the applicable GlobalProtect HIP posture checks in least-privilege access design and define remediation for failed devices.
- For U.S. regional insurer: Place suitable virtual firewall inspection and granular workload policies at the east-west communication boundary.
Explanation
Correct Answer
C:This directly addresses the recorded gap: Managed laptops and unpatched personal endpoints receive the same private-app privileges because health state is not considered. The architectural control is Include the applicable GlobalProtect HIP posture checks in least-privilege access design and define remediation for failed devices. The decisive test is Connect a compliant and a deliberately noncompliant test endpoint and inspect HIP match and policy outcome. The objective is Private-app access reflects the documented device-health condition, not just the username. Case R152-C003; angle 1; architecture design; option considered: Include the applicable GlobalProtect HIP posture checks in least-privilege access design and define remediation for failed devices.
Incorrect Answers
A:Threat inspection after allow decision addresses a different architectural concern, such as when a justified outbound access rule passes malicious files because it has no threat prevention profile attached. It does not establish endpoint hip posture gating here. The decisive test is to connect a compliant and a deliberately noncompliant test endpoint and inspect HIP match and policy outcome.
B:Device-ID controls for unmanaged systems addresses a different architectural concern, such as when a hospital device has a rotating IP lease and firewall rules based on old IP addresses cannot reliably constrain its traffic. It does not establish endpoint hip posture gating here. The decisive test is to connect a compliant and a deliberately noncompliant test endpoint and inspect HIP match and policy outcome.
D:This option addresses a different design objective: Microsegmentation for workloads, not the primary control for endpoint hip posture gating. It would be relevant where Workloads in one private cloud subnet communicate laterally without service-level restrictions, despite host-role differences. Here the necessary evidence is Connect a compliant and a deliberately noncompliant test endpoint and inspect HIP match and policy outcome. Case R152-C003; angle 1; architecture design; option considered: Place suitable virtual firewall inspection and granular workload policies at the east-west communication boundary.
Question 10
Which validation most directly demonstrates endpoint hip posture gating is correctly designed for U.S. regional insurer? The security architecture board of U.S. regional insurer is preparing a new Zero Trust Enterprise program. The stakeholders have given the following specific requirement: Managed laptops and unpatched personal endpoints receive the same private-app privileges because health state is not considered. No existing change is being reverted; select the most directly justified architecture for this stated requirement.
- For U.S. regional insurer: Connect a compliant and a deliberately noncompliant test endpoint and inspect HIP match and policy outcome.
- For U.S. regional insurer: Replay labeled permitted and blocked test flows and verify timestamped logs and ownership for investigation.
- For U.S. regional insurer: Exercise both the approved management application and an unrelated HTTPS application on the same port.
- For U.S. regional insurer: Trace an approved supervisory flow and a blocked workstation-to-controller flow across the proposed zones.
Explanation
Correct Answer
A:This checks the relevant endpoint hip posture gating enforcement path rather than a distant symptom. Connect a compliant and a deliberately noncompliant test endpoint and inspect HIP match and policy outcome. The expected evidence is Private-app access reflects the documented device-health condition, not just the username. Case R152-C003; angle 2; architecture design; option considered: Connect a compliant and a deliberately noncompliant test endpoint and inspect HIP match and policy outcome.
Incorrect Answers
B:This option addresses a different design objective: Zero Trust control telemetry, not the primary control for endpoint hip posture gating. It would be relevant where A network segmentation rollout reports success without measuring blocked lateral attempts or policy misses. Here the necessary evidence is Connect a compliant and a deliberately noncompliant test endpoint and inspect HIP match and policy outcome. Case R152-C003; angle 2; architecture design; option considered: Replay labeled permitted and blocked test flows and verify timestamped logs and ownership for investigation.
C:This option addresses a different design objective: App-ID instead of port allow lists, not the primary control for endpoint hip posture gating. It would be relevant where The organization permits arbitrary HTTPS to an admin segment because the policy matches TCP 443 but not actual applications. Here the necessary evidence is Connect a compliant and a deliberately noncompliant test endpoint and inspect HIP match and policy outcome. Case R152-C003; angle 2; architecture design; option considered: Exercise both the approved management application and an unrelated HTTPS application on the same port.
D:This option addresses a different design objective: Segmenting campus trust zones, not the primary control for endpoint hip posture gating. It would be relevant where A flat campus VLAN allows employee workstations to initiate unrestricted sessions toward the manufacturing control network. Here the necessary evidence is Connect a compliant and a deliberately noncompliant test endpoint and inspect HIP match and policy outcome. Case R152-C003; angle 2; architecture design; option considered: Trace an approved supervisory flow and a blocked workstation-to-controller flow across the proposed zones.
Palo Alto Networks Network Security Architect (NetSec-Architect) Practice Tests