100% Latest & Updated Palo Alto Networks NetSec-Architect Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!
Question 170
Which validation most directly demonstrates collector log redundancy is correctly designed for Latin American logistics group? The security architecture board of Latin American logistics group is preparing a new Centralized Management and IAM program. The stakeholders have given the following specific requirement: A collector failure causes missing audit records even though two collector appliances were purchased. No existing change is being reverted; select the most directly justified architecture for this stated requirement.
- For Latin American logistics group: Disable a test collector and verify retained sample logs are queryable and that redundancy capacity remains adequate.
- For Latin American logistics group: Generate a labeled log event and verify that the SIEM records it once or recognizes the duplicate copies.
- For Latin American logistics group: Perform a planned failover exercise while reviewing management access and configuration synchronization.
- For Latin American logistics group: Disable and restore the test sync agent and check freshness and mapping diagnostics.
Explanation
Correct Answer
A:This checks the relevant collector log redundancy enforcement path rather than a distant symptom. Disable a test collector and verify retained sample logs are queryable and that redundancy capacity remains adequate. The expected evidence is Required audit records survive the selected single-collector failure scenario. Case R152-C043; angle 2; architecture design; option considered: Disable a test collector and verify retained sample logs are queryable and that redundancy capacity remains adequate.
Incorrect Answers
B:Log duplication in redundant collectors addresses a different architectural concern, such as when a security analytics pipeline double counts events when both redundant collector copies are forwarded. It does not establish collector log redundancy here. The decisive test is to disable a test collector and verify retained sample logs are queryable and that redundancy capacity remains adequate.
C:This option addresses a different design objective: Panorama management HA, not the primary control for collector log redundancy. It would be relevant where A single Panorama management appliance is a change-control outage risk for managed regional firewalls. Here the necessary evidence is Disable a test collector and verify retained sample logs are queryable and that redundancy capacity remains adequate. Case R152-C043; angle 2; architecture design; option considered: Perform a planned failover exercise while reviewing management access and configuration synchronization.
D:This option addresses a different design objective: On-premises identity directory bridge, not the primary control for collector log redundancy. It would be relevant where An enterprise's authoritative directory remains on premises and direct inbound exposure of domain controllers is forbidden. Here the necessary evidence is Disable a test collector and verify retained sample logs are queryable and that redundancy capacity remains adequate. Case R152-C043; angle 2; architecture design; option considered: Disable and restore the test sync agent and check freshness and mapping diagnostics.
Question 171
Which design assumption should the architect REJECT when evaluating collector log redundancy for Latin American logistics group? The security architecture board of Latin American logistics group is preparing a new Centralized Management and IAM program. The stakeholders have given the following specific requirement: A collector failure causes missing audit records even though two collector appliances were purchased. No existing change is being reverted; select the most directly justified architecture for this stated requirement.
- For Latin American logistics group: Treat two unrelated collectors without redundancy settings as guaranteed duplicate log storage.
- For Latin American logistics group: Configure supported collector group log redundancy with model/disk and capacity requirements documented.
- For Latin American logistics group: Required audit records survive the selected single-collector failure scenario.
- For Latin American logistics group: Disable a test collector and verify retained sample logs are queryable and that redundancy capacity remains adequate.
Explanation
Correct Answer
A:Reject this assumption: Treat two unrelated collectors without redundancy settings as guaranteed duplicate log storage. It does not establish collector log redundancy; the supported architecture is Configure supported collector group log redundancy with model/disk and capacity requirements documented. Verify it by: Disable a test collector and verify retained sample logs are queryable and that redundancy capacity remains adequate. Case R152-C043; angle 3; architecture design; option considered: Treat two unrelated collectors without redundancy settings as guaranteed duplicate log storage.
Incorrect Answers
B:This is a valid design/control/evidence statement in the specified case, not the assumption to reject. Configure supported collector group log redundancy with model/disk and capacity requirements documented. It is consistent with the required outcome: Required audit records survive the selected single-collector failure scenario. Case R152-C043; angle 3; architecture design; option considered: Configure supported collector group log redundancy with model/disk and capacity requirements documented.
C:This is a valid design/control/evidence statement in the specified case, not the assumption to reject. Required audit records survive the selected single-collector failure scenario. It is consistent with the required outcome: Required audit records survive the selected single-collector failure scenario. Case R152-C043; angle 3; architecture design; option considered: Required audit records survive the selected single-collector failure scenario.
D:This is a valid design/control/evidence statement in the specified case, not the assumption to reject. Disable a test collector and verify retained sample logs are queryable and that redundancy capacity remains adequate. It is consistent with the required outcome: Required audit records survive the selected single-collector failure scenario. Case R152-C043; angle 3; architecture design; option considered: Disable a test collector and verify retained sample logs are queryable and that redundancy capacity remains adequate.
Question 172
Select TWO directly linked controls for Latin American logistics group: the architectural remedy and its decisive validation. The security architecture board of Latin American logistics group is preparing a new Centralized Management and IAM program. The stakeholders have given the following specific requirement: A collector failure causes missing audit records even though two collector appliances were purchased. No existing change is being reverted; select the most directly justified architecture for this stated requirement.
- For Latin American logistics group: Align supported SAML authentication with Cloud Identity Engine/User-ID mapping and identity propagation to enforcement points.
- For Latin American logistics group: Change a test user's group assignment and verify sync state and resulting access decision.
- For Latin American logistics group: Treat two unrelated collectors without redundancy settings as guaranteed duplicate log storage.
- For Latin American logistics group: Disable a test collector and verify retained sample logs are queryable and that redundancy capacity remains adequate.
- For Latin American logistics group: Configure supported collector group log redundancy with model/disk and capacity requirements documented.
Explanation
Correct Answer
D:This checks the relevant collector log redundancy enforcement path rather than a distant symptom. Disable a test collector and verify retained sample logs are queryable and that redundancy capacity remains adequate. The expected evidence is Required audit records survive the selected single-collector failure scenario. Case R152-C043; angle 4; architecture design; option considered: Disable a test collector and verify retained sample logs are queryable and that redundancy capacity remains adequate.
E:This directly addresses the recorded gap: A collector failure causes missing audit records even though two collector appliances were purchased. The architectural control is Configure supported collector group log redundancy with model/disk and capacity requirements documented. The decisive test is Disable a test collector and verify retained sample logs are queryable and that redundancy capacity remains adequate. The objective is Required audit records survive the selected single-collector failure scenario. Case R152-C043; angle 4; architecture design; option considered: Configure supported collector group log redundancy with model/disk and capacity requirements documented.
Incorrect Answers
A:This option addresses a different design objective: SAML identity to user mapping, not the primary control for collector log redundancy. It would be relevant where A user authenticates successfully to cloud identity but firewall policies still see an unknown user. Here the necessary evidence is Disable a test collector and verify retained sample logs are queryable and that redundancy capacity remains adequate. Case R152-C043; angle 4; architecture design; option considered: Align supported SAML authentication with Cloud Identity Engine/User-ID mapping and identity propagation to enforcement points.
B:This option addresses a different design objective: Cloud Identity Engine directory synchronization, not the primary control for collector log redundancy. It would be relevant where Cloud-managed firewalls enforce stale group membership after a directory organizational restructure. Here the necessary evidence is Disable a test collector and verify retained sample logs are queryable and that redundancy capacity remains adequate. Case R152-C043; angle 4; architecture design; option considered: Change a test user's group assignment and verify sync state and resulting access decision.
C:This is an unsafe or insufficient shortcut for collector log redundancy: Treat two unrelated collectors without redundancy settings as guaranteed duplicate log storage. The scoped requirement instead calls for Configure supported collector group log redundancy with model/disk and capacity requirements documented. Case R152-C043; angle 4; architecture design; option considered: Treat two unrelated collectors without redundancy settings as guaranteed duplicate log storage.
Question 173
For Cloud-native manufacturing firm, which is the most directly supported architectural control for collector log redundancy? After Cloud-native manufacturing firm completed a limited security transformation pilot, reviewers observed a control gap: A collector failure causes missing audit records even though two collector appliances were purchased. The case assumes the affected flows and dependencies have been traced and all unrelated systems are functioning; choose the narrow design repair before wider deployment.
- For Cloud-native manufacturing firm: Configure supported collector group log redundancy with model/disk and capacity requirements documented.
- For Cloud-native manufacturing firm: Choose the supported Cloud Identity Agent directory synchronization pattern with appropriate outbound connectivity.
- For Cloud-native manufacturing firm: Align supported SAML authentication with Cloud Identity Engine/User-ID mapping and identity propagation to enforcement points.
- For Cloud-native manufacturing firm: Assign firewalls to a collector group and configure explicit log forwarding preference lists.
Explanation
Correct Answer
A:This directly addresses the recorded gap: A collector failure causes missing audit records even though two collector appliances were purchased. The architectural control is Configure supported collector group log redundancy with model/disk and capacity requirements documented. The decisive test is Disable a test collector and verify retained sample logs are queryable and that redundancy capacity remains adequate. The objective is Required audit records survive the selected single-collector failure scenario. Case R152-C044; angle 1; post-pilot control gap; option considered: Configure supported collector group log redundancy with model/disk and capacity requirements documented.
Incorrect Answers
B:This option addresses a different design objective: On-premises identity directory bridge, not the primary control for collector log redundancy. It would be relevant where An enterprise's authoritative directory remains on premises and direct inbound exposure of domain controllers is forbidden. Here the necessary evidence is Disable a test collector and verify retained sample logs are queryable and that redundancy capacity remains adequate. Case R152-C044; angle 1; post-pilot control gap; option considered: Choose the supported Cloud Identity Agent directory synchronization pattern with appropriate outbound connectivity.
C:This option addresses a different design objective: SAML identity to user mapping, not the primary control for collector log redundancy. It would be relevant where A user authenticates successfully to cloud identity but firewall policies still see an unknown user. Here the necessary evidence is Disable a test collector and verify retained sample logs are queryable and that redundancy capacity remains adequate. Case R152-C044; angle 1; post-pilot control gap; option considered: Align supported SAML authentication with Cloud Identity Engine/User-ID mapping and identity propagation to enforcement points.
D:Collector forwarding preferences addresses a different architectural concern, such as when new firewalls are registered in Panorama but their logs do not reach the intended regional collector group. It does not establish collector log redundancy here. The decisive test is to disable a test collector and verify retained sample logs are queryable and that redundancy capacity remains adequate.
Question 174
Which validation most directly demonstrates collector log redundancy is correctly designed for Cloud-native manufacturing firm? After Cloud-native manufacturing firm completed a limited security transformation pilot, reviewers observed a control gap: A collector failure causes missing audit records even though two collector appliances were purchased. The case assumes the affected flows and dependencies have been traced and all unrelated systems are functioning; choose the narrow design repair before wider deployment.
- For Cloud-native manufacturing firm: Disable a test collector and verify retained sample logs are queryable and that redundancy capacity remains adequate.
- For Cloud-native manufacturing firm: Run a controlled log-ingestion load test and measure drops, latency, and Panorama management responsiveness.
- For Cloud-native manufacturing firm: Observe a scheduled sync past the previous interactive token window and review authentication audit events.
- For Cloud-native manufacturing firm: Use the same test identities against both enforcement points and compare policy results.
Explanation
Correct Answer
A:This checks the relevant collector log redundancy enforcement path rather than a distant symptom. Disable a test collector and verify retained sample logs are queryable and that redundancy capacity remains adequate. The expected evidence is Required audit records survive the selected single-collector failure scenario. Case R152-C044; angle 2; post-pilot control gap; option considered: Disable a test collector and verify retained sample logs are queryable and that redundancy capacity remains adequate.
Incorrect Answers
B:Distributed log collection addresses a different architectural concern, such as when a central Panorama server is CPU-constrained by high-volume security logs from remote regions. It does not establish collector log redundancy here. The decisive test is to disable a test collector and verify retained sample logs are queryable and that redundancy capacity remains adequate.
C:This option addresses a different design objective: Okta directory service credentials, not the primary control for collector log redundancy. It would be relevant where An Okta directory sync deployment needs stable unattended operation, but its interactive authorization expires repeatedly. Here the necessary evidence is Disable a test collector and verify retained sample logs are queryable and that redundancy capacity remains adequate. Case R152-C044; angle 2; post-pilot control gap; option considered: Observe a scheduled sync past the previous interactive token window and review authentication audit events.
D:This option addresses a different design objective: Cross-platform identity policy consistency, not the primary control for collector log redundancy. It would be relevant where NGFW and Prisma Access independently evaluate groups, producing different privileges for the same person. Here the necessary evidence is Disable a test collector and verify retained sample logs are queryable and that redundancy capacity remains adequate. Case R152-C044; angle 2; post-pilot control gap; option considered: Use the same test identities against both enforcement points and compare policy results.
Question 175
Which design assumption should the architect REJECT when evaluating collector log redundancy for Cloud-native manufacturing firm? After Cloud-native manufacturing firm completed a limited security transformation pilot, reviewers observed a control gap: A collector failure causes missing audit records even though two collector appliances were purchased. The case assumes the affected flows and dependencies have been traced and all unrelated systems are functioning; choose the narrow design repair before wider deployment.
- For Cloud-native manufacturing firm: Required audit records survive the selected single-collector failure scenario.
- For Cloud-native manufacturing firm: Configure supported collector group log redundancy with model/disk and capacity requirements documented.
- For Cloud-native manufacturing firm: Treat two unrelated collectors without redundancy settings as guaranteed duplicate log storage.
- For Cloud-native manufacturing firm: Disable a test collector and verify retained sample logs are queryable and that redundancy capacity remains adequate.
Explanation
Correct Answer
C:Reject this assumption: Treat two unrelated collectors without redundancy settings as guaranteed duplicate log storage. It does not establish collector log redundancy; the supported architecture is Configure supported collector group log redundancy with model/disk and capacity requirements documented. Verify it by: Disable a test collector and verify retained sample logs are queryable and that redundancy capacity remains adequate. Case R152-C044; angle 3; post-pilot control gap; option considered: Treat two unrelated collectors without redundancy settings as guaranteed duplicate log storage.
Incorrect Answers
A:This is a valid design/control/evidence statement in the specified case, not the assumption to reject. Required audit records survive the selected single-collector failure scenario. It is consistent with the required outcome: Required audit records survive the selected single-collector failure scenario. Case R152-C044; angle 3; post-pilot control gap; option considered: Required audit records survive the selected single-collector failure scenario.
B:This is a valid design/control/evidence statement in the specified case, not the assumption to reject. Configure supported collector group log redundancy with model/disk and capacity requirements documented. It is consistent with the required outcome: Required audit records survive the selected single-collector failure scenario. Case R152-C044; angle 3; post-pilot control gap; option considered: Configure supported collector group log redundancy with model/disk and capacity requirements documented.
D:This is a valid design/control/evidence statement in the specified case, not the assumption to reject. Disable a test collector and verify retained sample logs are queryable and that redundancy capacity remains adequate. It is consistent with the required outcome: Required audit records survive the selected single-collector failure scenario. Case R152-C044; angle 3; post-pilot control gap; option considered: Disable a test collector and verify retained sample logs are queryable and that redundancy capacity remains adequate.
Question 176
Select THREE linked elements for Cloud-native manufacturing firm: a supported architecture, the direct test, and the required outcome. After Cloud-native manufacturing firm completed a limited security transformation pilot, reviewers observed a control gap: A collector failure causes missing audit records even though two collector appliances were purchased. The case assumes the affected flows and dependencies have been traced and all unrelated systems are functioning; choose the narrow design repair before wider deployment.
- For Cloud-native manufacturing firm: Treat two unrelated collectors without redundancy settings as guaranteed duplicate log storage.
- For Cloud-native manufacturing firm: Disable a test collector and verify retained sample logs are queryable and that redundancy capacity remains adequate.
- For Cloud-native manufacturing firm: Use Cloud Identity Engine directory synchronization and examine source directory, refresh, and group-mapping behavior.
- For Cloud-native manufacturing firm: Required audit records survive the selected single-collector failure scenario.
- For Cloud-native manufacturing firm: Identity semantics and group lifecycle remain aligned while platform-specific policies stay explicit.
- For Cloud-native manufacturing firm: Configure supported collector group log redundancy with model/disk and capacity requirements documented.
Explanation
Correct Answer
B:This checks the relevant collector log redundancy enforcement path rather than a distant symptom. Disable a test collector and verify retained sample logs are queryable and that redundancy capacity remains adequate. The expected evidence is Required audit records survive the selected single-collector failure scenario. Case R152-C044; angle 4; post-pilot control gap; option considered: Disable a test collector and verify retained sample logs are queryable and that redundancy capacity remains adequate.
D:The required result is required audit records survive the selected single-collector failure scenario. Apply this control: Configure supported collector group log redundancy with model/disk and capacity requirements documented. Verify with: Disable a test collector and verify retained sample logs are queryable and that redundancy capacity remains adequate.
F:This directly addresses the recorded gap: A collector failure causes missing audit records even though two collector appliances were purchased. The architectural control is Configure supported collector group log redundancy with model/disk and capacity requirements documented. The decisive test is Disable a test collector and verify retained sample logs are queryable and that redundancy capacity remains adequate. The objective is Required audit records survive the selected single-collector failure scenario. Case R152-C044; angle 4; post-pilot control gap; option considered: Configure supported collector group log redundancy with model/disk and capacity requirements documented.
Incorrect Answers
A:This is an unsafe or insufficient shortcut for collector log redundancy: Treat two unrelated collectors without redundancy settings as guaranteed duplicate log storage. The scoped requirement instead calls for Configure supported collector group log redundancy with model/disk and capacity requirements documented. Case R152-C044; angle 4; post-pilot control gap; option considered: Treat two unrelated collectors without redundancy settings as guaranteed duplicate log storage.
C:This option addresses a different design objective: Cloud Identity Engine directory synchronization, not the primary control for collector log redundancy. It would be relevant where Cloud-managed firewalls enforce stale group membership after a directory organizational restructure. Here the necessary evidence is Disable a test collector and verify retained sample logs are queryable and that redundancy capacity remains adequate. Case R152-C044; angle 4; post-pilot control gap; option considered: Use Cloud Identity Engine directory synchronization and examine source directory, refresh, and group-mapping behavior.
E:This option addresses a different design objective: Cross-platform identity policy consistency, not the primary control for collector log redundancy. It would be relevant where NGFW and Prisma Access independently evaluate groups, producing different privileges for the same person. Here the necessary evidence is Disable a test collector and verify retained sample logs are queryable and that redundancy capacity remains adequate. Case R152-C044; angle 4; post-pilot control gap; option considered: Identity semantics and group lifecycle remain aligned while platform-specific policies stay explicit.
Question 177
For Public-sector services agency, which is the most directly supported architectural control for collector forwarding preferences? The security architecture board of Public-sector services agency is preparing a new Centralized Management and IAM program. The stakeholders have given the following specific requirement: New firewalls are registered in Panorama but their logs do not reach the intended regional collector group. No existing change is being reverted; select the most directly justified architecture for this stated requirement.
- For Public-sector services agency: Configure supported collector group log redundancy with model/disk and capacity requirements documented.
- For Public-sector services agency: Assign firewalls to a collector group and configure explicit log forwarding preference lists.
- For Public-sector services agency: Design Strata Cloud Manager management scope and RBAC appropriate to shared baselines and regional overrides.
- For Public-sector services agency: Design supported log forwarding with TLS-protected syslog and appropriate certificates and destination policy.
Explanation
Correct Answer
B:This directly addresses the recorded gap: New firewalls are registered in Panorama but their logs do not reach the intended regional collector group. The architectural control is Assign firewalls to a collector group and configure explicit log forwarding preference lists. The decisive test is Generate test threat and traffic events and confirm arrival at the correct collector destinations. The objective is Each managed firewall forwards the required logs according to the approved preference order. Case R152-C045; angle 1; architecture design; option considered: Assign firewalls to a collector group and configure explicit log forwarding preference lists.
Incorrect Answers
A:This option addresses a different design objective: Collector log redundancy, not the primary control for collector forwarding preferences. It would be relevant where A collector failure causes missing audit records even though two collector appliances were purchased. Here the necessary evidence is Generate test threat and traffic events and confirm arrival at the correct collector destinations. Case R152-C045; angle 1; architecture design; option considered: Configure supported collector group log redundancy with model/disk and capacity requirements documented.
C:This option addresses a different design objective: SCM management scoping, not the primary control for collector forwarding preferences. It would be relevant where A multinational organization needs centralized security policy with regional policy exceptions and clear administration boundaries. Here the necessary evidence is Generate test threat and traffic events and confirm arrival at the correct collector destinations. Case R152-C045; angle 1; architecture design; option considered: Design Strata Cloud Manager management scope and RBAC appropriate to shared baselines and regional overrides.
D:Secure external syslog integration addresses a different architectural concern, such as when compliance requires copies of select firewall events at an external SIEM but the current feed is cleartext. It does not establish collector forwarding preferences here. The decisive test is to generate test threat and traffic events and confirm arrival at the correct collector destinations.
Question 178
Which validation most directly demonstrates collector forwarding preferences is correctly designed for Public-sector services agency? The security architecture board of Public-sector services agency is preparing a new Centralized Management and IAM program. The stakeholders have given the following specific requirement: New firewalls are registered in Panorama but their logs do not reach the intended regional collector group. No existing change is being reverted; select the most directly justified architecture for this stated requirement.
- For Public-sector services agency: Run a controlled log-ingestion load test and measure drops, latency, and Panorama management responsiveness.
- For Public-sector services agency: Disable and restore the test sync agent and check freshness and mapping diagnostics.
- For Public-sector services agency: Generate test threat and traffic events and confirm arrival at the correct collector destinations.
- For Public-sector services agency: Have two scoped administrators attempt authorized and out-of-scope policy changes in a test workspace.
Explanation
Correct Answer
C:This checks the relevant collector forwarding preferences enforcement path rather than a distant symptom. Generate test threat and traffic events and confirm arrival at the correct collector destinations. The expected evidence is Each managed firewall forwards the required logs according to the approved preference order. Case R152-C045; angle 2; architecture design; option considered: Generate test threat and traffic events and confirm arrival at the correct collector destinations.
Incorrect Answers
A:This option addresses a different design objective: Distributed log collection, not the primary control for collector forwarding preferences. It would be relevant where A central Panorama server is CPU-constrained by high-volume security logs from remote regions. Here the necessary evidence is Generate test threat and traffic events and confirm arrival at the correct collector destinations. Case R152-C045; angle 2; architecture design; option considered: Run a controlled log-ingestion load test and measure drops, latency, and Panorama management responsiveness.
B:On-premises identity directory bridge addresses a different architectural concern, such as when an enterprise's authoritative directory remains on premises and direct inbound exposure of domain controllers is forbidden. It does not establish collector forwarding preferences here. The decisive test is to generate test threat and traffic events and confirm arrival at the correct collector destinations.
D:This option addresses a different design objective: SCM management scoping, not the primary control for collector forwarding preferences. It would be relevant where A multinational organization needs centralized security policy with regional policy exceptions and clear administration boundaries. Here the necessary evidence is Generate test threat and traffic events and confirm arrival at the correct collector destinations. Case R152-C045; angle 2; architecture design; option considered: Have two scoped administrators attempt authorized and out-of-scope policy changes in a test workspace.
Question 179
Which design assumption should the architect REJECT when evaluating collector forwarding preferences for Public-sector services agency? The security architecture board of Public-sector services agency is preparing a new Centralized Management and IAM program. The stakeholders have given the following specific requirement: New firewalls are registered in Panorama but their logs do not reach the intended regional collector group. No existing change is being reverted; select the most directly justified architecture for this stated requirement.
- For Public-sector services agency: Assume adding a collector object automatically assigns every managed firewall to it.
- For Public-sector services agency: Assign firewalls to a collector group and configure explicit log forwarding preference lists.
- For Public-sector services agency: Each managed firewall forwards the required logs according to the approved preference order.
- For Public-sector services agency: Generate test threat and traffic events and confirm arrival at the correct collector destinations.
Explanation
Correct Answer
A:Reject this assumption: Assume adding a collector object automatically assigns every managed firewall to it. It does not establish collector forwarding preferences; the supported architecture is Assign firewalls to a collector group and configure explicit log forwarding preference lists. Verify it by: Generate test threat and traffic events and confirm arrival at the correct collector destinations. Case R152-C045; angle 3; architecture design; option considered: Assume adding a collector object automatically assigns every managed firewall to it.
Incorrect Answers
B:This is a valid design/control/evidence statement in the specified case, not the assumption to reject. Assign firewalls to a collector group and configure explicit log forwarding preference lists. It is consistent with the required outcome: Each managed firewall forwards the required logs according to the approved preference order. Case R152-C045; angle 3; architecture design; option considered: Assign firewalls to a collector group and configure explicit log forwarding preference lists.
C:This is a valid design/control/evidence statement in the specified case, not the assumption to reject. Each managed firewall forwards the required logs according to the approved preference order. It is consistent with the required outcome: Each managed firewall forwards the required logs according to the approved preference order. Case R152-C045; angle 3; architecture design; option considered: Each managed firewall forwards the required logs according to the approved preference order.
D:This is a valid design/control/evidence statement in the specified case, not the assumption to reject. Generate test threat and traffic events and confirm arrival at the correct collector destinations. It is consistent with the required outcome: Each managed firewall forwards the required logs according to the approved preference order. Case R152-C045; angle 3; architecture design; option considered: Generate test threat and traffic events and confirm arrival at the correct collector destinations.
Question 180
Select THREE linked elements for Public-sector services agency: a supported architecture, the direct test, and the required outcome. The security architecture board of Public-sector services agency is preparing a new Centralized Management and IAM program. The stakeholders have given the following specific requirement: New firewalls are registered in Panorama but their logs do not reach the intended regional collector group. No existing change is being reverted; select the most directly justified architecture for this stated requirement.
- For Public-sector services agency: Design Strata Cloud Manager management scope and RBAC appropriate to shared baselines and regional overrides.
- For Public-sector services agency: Generate test threat and traffic events and confirm arrival at the correct collector destinations.
- For Public-sector services agency: Investigators can retrieve expected events centrally under the approved retention design.
- For Public-sector services agency: Each managed firewall forwards the required logs according to the approved preference order.
- For Public-sector services agency: Assign firewalls to a collector group and configure explicit log forwarding preference lists.
- For Public-sector services agency: Assume adding a collector object automatically assigns every managed firewall to it.
Explanation
Correct Answer
B:This checks the relevant collector forwarding preferences enforcement path rather than a distant symptom. Generate test threat and traffic events and confirm arrival at the correct collector destinations. The expected evidence is Each managed firewall forwards the required logs according to the approved preference order. Case R152-C045; angle 4; architecture design; option considered: Generate test threat and traffic events and confirm arrival at the correct collector destinations.
D:The required end state is Each managed firewall forwards the required logs according to the approved preference order. The architect must deploy Assign firewalls to a collector group and configure explicit log forwarding preference lists. and validate using Generate test threat and traffic events and confirm arrival at the correct collector destinations. Case R152-C045; angle 4; architecture design; option considered: Each managed firewall forwards the required logs according to the approved preference order.
E:This directly addresses the recorded gap: New firewalls are registered in Panorama but their logs do not reach the intended regional collector group. The architectural control is Assign firewalls to a collector group and configure explicit log forwarding preference lists. The decisive test is Generate test threat and traffic events and confirm arrival at the correct collector destinations. The objective is Each managed firewall forwards the required logs according to the approved preference order. Case R152-C045; angle 4; architecture design; option considered: Assign firewalls to a collector group and configure explicit log forwarding preference lists.
Incorrect Answers
A:This option addresses a different design objective: SCM management scoping, not the primary control for collector forwarding preferences. It would be relevant where A multinational organization needs centralized security policy with regional policy exceptions and clear administration boundaries. Here the necessary evidence is Generate test threat and traffic events and confirm arrival at the correct collector destinations. Case R152-C045; angle 4; architecture design; option considered: Design Strata Cloud Manager management scope and RBAC appropriate to shared baselines and regional overrides.
C:Strata Logging Service logging addresses a different architectural concern, such as when a cloud-managed branch fleet has inconsistent log retention and central investigations miss devices. It does not establish collector forwarding preferences here. The decisive test is to generate test threat and traffic events and confirm arrival at the correct collector destinations.
F:This is an unsafe or insufficient shortcut for collector forwarding preferences: Assume adding a collector object automatically assigns every managed firewall to it. The scoped requirement instead calls for Assign firewalls to a collector group and configure explicit log forwarding preference lists.
Palo Alto Networks Network Security Architect (NetSec-Architect) Practice Tests