100% Latest & Updated Palo Alto Networks NetSec-Architect Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!
Question 300
Select THREE linked elements for Latin American logistics group: a supported architecture, the direct test, and the required outcome. The security architecture board of Latin American logistics group is preparing a new SSE Private Application Access program. The stakeholders have given the following specific requirement: Two acquisitions use identical internal RFC1918 subnets and legacy service connections cannot distinguish destinations. No existing change is being reverted; select the most directly justified architecture for this stated requirement.
- For Latin American logistics group: Design supported alternative service and app access paths with explicit routing and failure-mode assumptions.
- For Latin American logistics group: Both private apps resolve to their intended targets without relying on ambiguous shared routes.
- For Latin American logistics group: Capacity headroom exists for peak private-app access without a single connector bottleneck.
- For Latin American logistics group: Evaluate the ZTNA Connector overlap-handling model and separate application/connector IP blocks.
- For Latin American logistics group: Announce identical overlapping subnets into one service connection routing table and assume uniqueness.
- For Latin American logistics group: Access two test applications with overlapping back-end addresses using distinct names and verify destinations.
Explanation
Correct Answer
B:The required end state is Both private apps resolve to their intended targets without relying on ambiguous shared routes. The architect must deploy Evaluate the ZTNA Connector overlap-handling model and separate application/connector IP blocks. and validate using Access two test applications with overlapping back-end addresses using distinct names and verify destinations. Case R152-C075; angle 4; architecture design; option considered: Both private apps resolve to their intended targets without relying on ambiguous shared routes.
D:This directly addresses the recorded gap: Two acquisitions use identical internal RFC1918 subnets and legacy service connections cannot distinguish destinations. The architectural control is Evaluate the ZTNA Connector overlap-handling model and separate application/connector IP blocks. The decisive test is Access two test applications with overlapping back-end addresses using distinct names and verify destinations. The objective is Both private apps resolve to their intended targets without relying on ambiguous shared routes. Case R152-C075; angle 4; architecture design; option considered: Evaluate the ZTNA Connector overlap-handling model and separate application/connector IP blocks.
F:This checks the relevant overlapping private address domains enforcement path rather than a distant symptom. Access two test applications with overlapping back-end addresses using distinct names and verify destinations. The expected evidence is Both private apps resolve to their intended targets without relying on ambiguous shared routes. Case R152-C075; angle 4; architecture design; option considered: Access two test applications with overlapping back-end addresses using distinct names and verify destinations.
Incorrect Answers
A:This option addresses a different design objective: Multi-region service resilience, not the primary control for overlapping private address domains. It would be relevant where A regional Prisma Access dependency creates a single path to a critical private application. Here the necessary evidence is Access two test applications with overlapping back-end addresses using distinct names and verify destinations. Case R152-C075; angle 4; architecture design; option considered: Design supported alternative service and app access paths with explicit routing and failure-mode assumptions.
C:This option addresses a different design objective: ZTNA Connector horizontal scaling, not the primary control for overlapping private address domains. It would be relevant where A new private-app portfolio exceeds the throughput budget of its sole connector instance. Here the necessary evidence is Access two test applications with overlapping back-end addresses using distinct names and verify destinations. Case R152-C075; angle 4; architecture design; option considered: Capacity headroom exists for peak private-app access without a single connector bottleneck.
E:This is an unsafe or insufficient shortcut for overlapping private address domains: Announce identical overlapping subnets into one service connection routing table and assume uniqueness. The scoped requirement instead calls for Evaluate the ZTNA Connector overlap-handling model and separate application/connector IP blocks.
Question 301
For Cloud-native manufacturing firm, which is the most directly supported architectural control for overlapping private address domains? After Cloud-native manufacturing firm completed a limited security transformation pilot, reviewers observed a control gap: Two acquisitions use identical internal RFC1918 subnets and legacy service connections cannot distinguish destinations. The case assumes the affected flows and dependencies have been traced and all unrelated systems are functioning; choose the narrow design repair before wider deployment.
- For Cloud-native manufacturing firm: Evaluate the ZTNA Connector overlap-handling model and separate application/connector IP blocks.
- For Cloud-native manufacturing firm: Use Prisma Browser private app access with Cloud Identity Engine authentication and supported connector target application definitions.
- For Cloud-native manufacturing firm: Evaluate Colo-Connect against the provider interconnect, routing, inspection and failover requirements.
- For Cloud-native manufacturing firm: Engineer service connection failover and route propagation checks for the approved private-app prefixes.
Explanation
Correct Answer
A:This directly addresses the recorded gap: Two acquisitions use identical internal RFC1918 subnets and legacy service connections cannot distinguish destinations. The architectural control is Evaluate the ZTNA Connector overlap-handling model and separate application/connector IP blocks. The decisive test is Access two test applications with overlapping back-end addresses using distinct names and verify destinations. The objective is Both private apps resolve to their intended targets without relying on ambiguous shared routes. Case R152-C076; angle 1; post-pilot control gap; option considered: Evaluate the ZTNA Connector overlap-handling model and separate application/connector IP blocks.
Incorrect Answers
B:Prisma Browser for unmanaged app access addresses a different architectural concern, such as when external contractors must access a private web app from unmanaged devices without full-device VPN enrollment. It does not establish overlapping private address domains here. The decisive test is to access two test applications with overlapping back-end addresses using distinct names and verify destinations.
C:This option addresses a different design objective: Colo-connected private on-ramp, not the primary control for overlapping private address domains. It would be relevant where A high-volume colocation campus needs predictable access to Prisma Access without routing all private traffic through the public internet. Here the necessary evidence is Access two test applications with overlapping back-end addresses using distinct names and verify destinations. Case R152-C076; angle 1; post-pilot control gap; option considered: Evaluate Colo-Connect against the provider interconnect, routing, inspection and failover requirements.
D:This option addresses a different design objective: Private-app service connection failover, not the primary control for overlapping private address domains. It would be relevant where A data-center service connection drops and policy permits an inaccessible route to remain preferred. Here the necessary evidence is Access two test applications with overlapping back-end addresses using distinct names and verify destinations. Case R152-C076; angle 1; post-pilot control gap; option considered: Engineer service connection failover and route propagation checks for the approved private-app prefixes.
Question 302
Which validation most directly demonstrates overlapping private address domains is correctly designed for Cloud-native manufacturing firm? After Cloud-native manufacturing firm completed a limited security transformation pilot, reviewers observed a control gap: Two acquisitions use identical internal RFC1918 subnets and legacy service connections cannot distinguish destinations. The case assumes the affected flows and dependencies have been traced and all unrelated systems are functioning; choose the narrow design repair before wider deployment.
- For Cloud-native manufacturing firm: Trace a test campus-to-private-app flow through the selected colocation on-ramp and failure path.
- For Cloud-native manufacturing firm: Inspect route selection and return flows for two user regions in the staged design.
- For Cloud-native manufacturing firm: Withdraw a planned route during maintenance and verify convergence and private-app session outcomes.
- For Cloud-native manufacturing firm: Access two test applications with overlapping back-end addresses using distinct names and verify destinations.
Explanation
Correct Answer
D:This checks the relevant overlapping private address domains enforcement path rather than a distant symptom. Access two test applications with overlapping back-end addresses using distinct names and verify destinations. The expected evidence is Both private apps resolve to their intended targets without relying on ambiguous shared routes. Case R152-C076; angle 2; post-pilot control gap; option considered: Access two test applications with overlapping back-end addresses using distinct names and verify destinations.
Incorrect Answers
A:This option addresses a different design objective: Colo-connected private on-ramp, not the primary control for overlapping private address domains. It would be relevant where A high-volume colocation campus needs predictable access to Prisma Access without routing all private traffic through the public internet. Here the necessary evidence is Access two test applications with overlapping back-end addresses using distinct names and verify destinations. Case R152-C076; angle 2; post-pilot control gap; option considered: Trace a test campus-to-private-app flow through the selected colocation on-ramp and failure path.
B:This option addresses a different design objective: Service connection routing choice, not the primary control for overlapping private address domains. It would be relevant where Private-app flows return through the wrong region because service-connection route behavior was not designed. Here the necessary evidence is Access two test applications with overlapping back-end addresses using distinct names and verify destinations. Case R152-C076; angle 2; post-pilot control gap; option considered: Inspect route selection and return flows for two user regions in the staged design.
C:This option addresses a different design objective: Private-app service connection failover, not the primary control for overlapping private address domains. It would be relevant where A data-center service connection drops and policy permits an inaccessible route to remain preferred. Here the necessary evidence is Access two test applications with overlapping back-end addresses using distinct names and verify destinations. Case R152-C076; angle 2; post-pilot control gap; option considered: Withdraw a planned route during maintenance and verify convergence and private-app session outcomes.
Question 303
Which design assumption should the architect REJECT when evaluating overlapping private address domains for Cloud-native manufacturing firm? After Cloud-native manufacturing firm completed a limited security transformation pilot, reviewers observed a control gap: Two acquisitions use identical internal RFC1918 subnets and legacy service connections cannot distinguish destinations. The case assumes the affected flows and dependencies have been traced and all unrelated systems are functioning; choose the narrow design repair before wider deployment.
- For Cloud-native manufacturing firm: Both private apps resolve to their intended targets without relying on ambiguous shared routes.
- For Cloud-native manufacturing firm: Evaluate the ZTNA Connector overlap-handling model and separate application/connector IP blocks.
- For Cloud-native manufacturing firm: Announce identical overlapping subnets into one service connection routing table and assume uniqueness.
- For Cloud-native manufacturing firm: Access two test applications with overlapping back-end addresses using distinct names and verify destinations.
Explanation
Correct Answer
C:Reject this assumption: Announce identical overlapping subnets into one service connection routing table and assume uniqueness. It does not establish overlapping private address domains; the supported architecture is Evaluate the ZTNA Connector overlap-handling model and separate application/connector IP blocks. Verify it by: Access two test applications with overlapping back-end addresses using distinct names and verify destinations. Case R152-C076; angle 3; post-pilot control gap; option considered: Announce identical overlapping subnets into one service connection routing table and assume uniqueness.
Incorrect Answers
A:This is a valid design/control/evidence statement in the specified case, not the assumption to reject. Both private apps resolve to their intended targets without relying on ambiguous shared routes. It is consistent with the required outcome: Both private apps resolve to their intended targets without relying on ambiguous shared routes. Case R152-C076; angle 3; post-pilot control gap; option considered: Both private apps resolve to their intended targets without relying on ambiguous shared routes.
B:This is a valid design/control/evidence statement in the specified case, not the assumption to reject. Evaluate the ZTNA Connector overlap-handling model and separate application/connector IP blocks. It is consistent with the required outcome: Both private apps resolve to their intended targets without relying on ambiguous shared routes. Case R152-C076; angle 3; post-pilot control gap; option considered: Evaluate the ZTNA Connector overlap-handling model and separate application/connector IP blocks.
D:This is a valid design/control/evidence statement in the specified case, not the assumption to reject. Access two test applications with overlapping back-end addresses using distinct names and verify destinations. It is consistent with the required outcome: Both private apps resolve to their intended targets without relying on ambiguous shared routes. Case R152-C076; angle 3; post-pilot control gap; option considered: Access two test applications with overlapping back-end addresses using distinct names and verify destinations.
Question 304
Which measurable end state best satisfies the stated overlapping private address domains requirement for Cloud-native manufacturing firm? After Cloud-native manufacturing firm completed a limited security transformation pilot, reviewers observed a control gap: Two acquisitions use identical internal RFC1918 subnets and legacy service connections cannot distinguish destinations. The case assumes the affected flows and dependencies have been traced and all unrelated systems are functioning; choose the narrow design repair before wider deployment.
- For Cloud-native manufacturing firm: The selected routing behavior meets app reachability and latency goals without unplanned asymmetric traffic.
- For Cloud-native manufacturing firm: Both private apps resolve to their intended targets without relying on ambiguous shared routes.
- For Cloud-native manufacturing firm: Capacity headroom exists for peak private-app access without a single connector bottleneck.
- For Cloud-native manufacturing firm: Required security inspection is preserved without unnecessary global tromboning.
Explanation
Correct Answer
B:The required end state is Both private apps resolve to their intended targets without relying on ambiguous shared routes. The architect must deploy Evaluate the ZTNA Connector overlap-handling model and separate application/connector IP blocks. and validate using Access two test applications with overlapping back-end addresses using distinct names and verify destinations. Case R152-C076; angle 4; post-pilot control gap; option considered: Both private apps resolve to their intended targets without relying on ambiguous shared routes.
Incorrect Answers
A:This option addresses a different design objective: Service connection routing choice, not the primary control for overlapping private address domains. It would be relevant where Private-app flows return through the wrong region because service-connection route behavior was not designed. Here the necessary evidence is Access two test applications with overlapping back-end addresses using distinct names and verify destinations. Case R152-C076; angle 4; post-pilot control gap; option considered: The selected routing behavior meets app reachability and latency goals without unplanned asymmetric traffic.
C:This option addresses a different design objective: ZTNA Connector horizontal scaling, not the primary control for overlapping private address domains. It would be relevant where A new private-app portfolio exceeds the throughput budget of its sole connector instance. Here the necessary evidence is Access two test applications with overlapping back-end addresses using distinct names and verify destinations. Case R152-C076; angle 4; post-pilot control gap; option considered: Capacity headroom exists for peak private-app access without a single connector bottleneck.
D:Regional Prisma Access latency design addresses a different architectural concern, such as when a global business routes overseas private-app sessions through a distant single service location. It does not establish overlapping private address domains here. The decisive test is to access two test applications with overlapping back-end addresses using distinct names and verify destinations.
Question 305
For Public-sector services agency, which is the most directly supported architectural control for ztna connector ip block isolation? The security architecture board of Public-sector services agency is preparing a new SSE Private Application Access program. The stakeholders have given the following specific requirement: Connector and application translation blocks overlap a GlobalProtect client address pool. No existing change is being reverted; select the most directly justified architecture for this stated requirement.
- For Public-sector services agency: Redesign the ZTNA Connector application and connector IP block allocations to be disjoint from existing pools.
- For Public-sector services agency: Evaluate Colo-Connect against the provider interconnect, routing, inspection and failover requirements.
- For Public-sector services agency: Use Prisma Browser private app access with Cloud Identity Engine authentication and supported connector target application definitions.
- For Public-sector services agency: Assess Palo Alto Networks supported integration with Google Cloud Network Connectivity Center and define attachment ownership.
Explanation
Correct Answer
A:This directly addresses the recorded gap: Connector and application translation blocks overlap a GlobalProtect client address pool. The architectural control is Redesign the ZTNA Connector application and connector IP block allocations to be disjoint from existing pools. The decisive test is Validate configured CIDRs against the service infrastructure, GlobalProtect pools, and data-center advertised prefixes. The objective is Connector translation and client addressing are unambiguous in the selected Prisma Access topology. Case R152-C077; angle 1; architecture design; option considered: Redesign the ZTNA Connector application and connector IP block allocations to be disjoint from existing pools.
Incorrect Answers
B:This option addresses a different design objective: Colo-connected private on-ramp, not the primary control for ztna connector ip block isolation. It would be relevant where A high-volume colocation campus needs predictable access to Prisma Access without routing all private traffic through the public internet. Here the necessary evidence is Validate configured CIDRs against the service infrastructure, GlobalProtect pools, and data-center advertised prefixes. Case R152-C077; angle 1; architecture design; option considered: Evaluate Colo-Connect against the provider interconnect, routing, inspection and failover requirements.
C:Prisma Browser for unmanaged app access addresses a different architectural concern, such as when external contractors must access a private web app from unmanaged devices without full-device VPN enrollment. It does not establish ztna connector ip block isolation here. The decisive test is to validate configured CIDRs against the service infrastructure, GlobalProtect pools, and data-center advertised prefixes.
D:Google Cloud NCC integration addresses a different architectural concern, such as when google Cloud branch resources require an auditable private-app route integration with the chosen SSE topology. It does not establish ztna connector ip block isolation here. The decisive test is to validate configured CIDRs against the service infrastructure, GlobalProtect pools, and data-center advertised prefixes.
Question 306
Which validation most directly demonstrates ztna connector ip block isolation is correctly designed for Public-sector services agency? The security architecture board of Public-sector services agency is preparing a new SSE Private Application Access program. The stakeholders have given the following specific requirement: Connector and application translation blocks overlap a GlobalProtect client address pool. No existing change is being reverted; select the most directly justified architecture for this stated requirement.
- For Public-sector services agency: Withdraw a planned route during maintenance and verify convergence and private-app session outcomes.
- For Public-sector services agency: Validate configured CIDRs against the service infrastructure, GlobalProtect pools, and data-center advertised prefixes.
- For Public-sector services agency: Inspect route selection and return flows for two user regions in the staged design.
- For Public-sector services agency: Access two test applications with overlapping back-end addresses using distinct names and verify destinations.
Explanation
Correct Answer
B:This checks the relevant ztna connector ip block isolation enforcement path rather than a distant symptom. Validate configured CIDRs against the service infrastructure, GlobalProtect pools, and data-center advertised prefixes. The expected evidence is Connector translation and client addressing are unambiguous in the selected Prisma Access topology. Case R152-C077; angle 2; architecture design; option considered: Validate configured CIDRs against the service infrastructure, GlobalProtect pools, and data-center advertised prefixes.
Incorrect Answers
A:This option addresses a different design objective: Private-app service connection failover, not the primary control for ztna connector ip block isolation. It would be relevant where A data-center service connection drops and policy permits an inaccessible route to remain preferred. Here the necessary evidence is Validate configured CIDRs against the service infrastructure, GlobalProtect pools, and data-center advertised prefixes. Case R152-C077; angle 2; architecture design; option considered: Withdraw a planned route during maintenance and verify convergence and private-app session outcomes.
C:Service connection routing choice addresses a different architectural concern, such as when private-app flows return through the wrong region because service-connection route behavior was not designed. It does not establish ztna connector ip block isolation here. The decisive test is to validate configured CIDRs against the service infrastructure, GlobalProtect pools, and data-center advertised prefixes.
D:This option addresses a different design objective: Overlapping private address domains, not the primary control for ztna connector ip block isolation. It would be relevant where Two acquisitions use identical internal RFC1918 subnets and legacy service connections cannot distinguish destinations. Here the necessary evidence is Validate configured CIDRs against the service infrastructure, GlobalProtect pools, and data-center advertised prefixes. Case R152-C077; angle 2; architecture design; option considered: Access two test applications with overlapping back-end addresses using distinct names and verify destinations.
Question 307
Which design assumption should the architect REJECT when evaluating ztna connector ip block isolation for Public-sector services agency? The security architecture board of Public-sector services agency is preparing a new SSE Private Application Access program. The stakeholders have given the following specific requirement: Connector and application translation blocks overlap a GlobalProtect client address pool. No existing change is being reverted; select the most directly justified architecture for this stated requirement.
- For Public-sector services agency: Redesign the ZTNA Connector application and connector IP block allocations to be disjoint from existing pools.
- For Public-sector services agency: Validate configured CIDRs against the service infrastructure, GlobalProtect pools, and data-center advertised prefixes.
- For Public-sector services agency: Reuse the GlobalProtect client IP range as the connector's application translation block.
- For Public-sector services agency: Connector translation and client addressing are unambiguous in the selected Prisma Access topology.
Explanation
Correct Answer
C:Reject this assumption: Reuse the GlobalProtect client IP range as the connector's application translation block. It does not establish ztna connector ip block isolation; the supported architecture is Redesign the ZTNA Connector application and connector IP block allocations to be disjoint from existing pools. Verify it by: Validate configured CIDRs against the service infrastructure, GlobalProtect pools, and data-center advertised prefixes. Case R152-C077; angle 3; architecture design; option considered: Reuse the GlobalProtect client IP range as the connector's application translation block.
Incorrect Answers
A:This is a valid design/control/evidence statement in the specified case, not the assumption to reject. Redesign the ZTNA Connector application and connector IP block allocations to be disjoint from existing pools. It is consistent with the required outcome: Connector translation and client addressing are unambiguous in the selected Prisma Access topology. Case R152-C077; angle 3; architecture design; option considered: Redesign the ZTNA Connector application and connector IP block allocations to be disjoint from existing pools.
B:This is a valid design/control/evidence statement in the specified case, not the assumption to reject. Validate configured CIDRs against the service infrastructure, GlobalProtect pools, and data-center advertised prefixes. It is consistent with the required outcome: Connector translation and client addressing are unambiguous in the selected Prisma Access topology. Case R152-C077; angle 3; architecture design; option considered: Validate configured CIDRs against the service infrastructure, GlobalProtect pools, and data-center advertised prefixes.
D:This is a valid design/control/evidence statement in the specified case, not the assumption to reject. Connector translation and client addressing are unambiguous in the selected Prisma Access topology. It is consistent with the required outcome: Connector translation and client addressing are unambiguous in the selected Prisma Access topology. Case R152-C077; angle 3; architecture design; option considered: Connector translation and client addressing are unambiguous in the selected Prisma Access topology.
Question 308
Select TWO directly linked controls for Public-sector services agency: the architectural remedy and its decisive validation. The security architecture board of Public-sector services agency is preparing a new SSE Private Application Access program. The stakeholders have given the following specific requirement: Connector and application translation blocks overlap a GlobalProtect client address pool. No existing change is being reverted; select the most directly justified architecture for this stated requirement.
- For Public-sector services agency: Onboard a test application FQDN and verify name resolution, connector health, and authorized client access.
- For Public-sector services agency: Reuse the GlobalProtect client IP range as the connector's application translation block.
- For Public-sector services agency: Select regional Prisma Access service locations and a measured traffic on/off-ramp strategy for users and apps.
- For Public-sector services agency: Redesign the ZTNA Connector application and connector IP block allocations to be disjoint from existing pools.
- For Public-sector services agency: Validate configured CIDRs against the service infrastructure, GlobalProtect pools, and data-center advertised prefixes.
Explanation
Correct Answer
D:This directly addresses the recorded gap: Connector and application translation blocks overlap a GlobalProtect client address pool. The architectural control is Redesign the ZTNA Connector application and connector IP block allocations to be disjoint from existing pools. The decisive test is Validate configured CIDRs against the service infrastructure, GlobalProtect pools, and data-center advertised prefixes. The objective is Connector translation and client addressing are unambiguous in the selected Prisma Access topology. Case R152-C077; angle 4; architecture design; option considered: Redesign the ZTNA Connector application and connector IP block allocations to be disjoint from existing pools.
E:This checks the relevant ztna connector ip block isolation enforcement path rather than a distant symptom. Validate configured CIDRs against the service infrastructure, GlobalProtect pools, and data-center advertised prefixes. The expected evidence is Connector translation and client addressing are unambiguous in the selected Prisma Access topology. Case R152-C077; angle 4; architecture design; option considered: Validate configured CIDRs against the service infrastructure, GlobalProtect pools, and data-center advertised prefixes.
Incorrect Answers
A:This option addresses a different design objective: ZTNA Connector FQDN onboarding, not the primary control for ztna connector ip block isolation. It would be relevant where The enterprise wants private FQDN applications reachable without manual IPsec tunnels to every cloud region. Here the necessary evidence is Validate configured CIDRs against the service infrastructure, GlobalProtect pools, and data-center advertised prefixes. Case R152-C077; angle 4; architecture design; option considered: Onboard a test application FQDN and verify name resolution, connector health, and authorized client access.
B:This is an unsafe or insufficient shortcut for ztna connector ip block isolation: Reuse the GlobalProtect client IP range as the connector's application translation block. The scoped requirement instead calls for Redesign the ZTNA Connector application and connector IP block allocations to be disjoint from existing pools. Case R152-C077; angle 4; architecture design; option considered: Reuse the GlobalProtect client IP range as the connector's application translation block.
C:This option addresses a different design objective: Regional Prisma Access latency design, not the primary control for ztna connector ip block isolation. It would be relevant where A global business routes overseas private-app sessions through a distant single service location. Here the necessary evidence is Validate configured CIDRs against the service infrastructure, GlobalProtect pools, and data-center advertised prefixes. Case R152-C077; angle 4; architecture design; option considered: Select regional Prisma Access service locations and a measured traffic on/off-ramp strategy for users and apps.
Question 309
For Technology research institute, which is the most directly supported architectural control for ztna connector ip block isolation? After Technology research institute completed a limited security transformation pilot, reviewers observed a control gap: Connector and application translation blocks overlap a GlobalProtect client address pool. The case assumes the affected flows and dependencies have been traced and all unrelated systems are functioning; choose the narrow design repair before wider deployment.
- For Technology research institute: Select regional Prisma Access service locations and a measured traffic on/off-ramp strategy for users and apps.
- For Technology research institute: Redesign the ZTNA Connector application and connector IP block allocations to be disjoint from existing pools.
- For Technology research institute: Use supported ZTNA Connector deployment with defined private app targets and connector-to-service connectivity.
- For Technology research institute: Evaluate the ZTNA Connector overlap-handling model and separate application/connector IP blocks.
Explanation
Correct Answer
B:This directly addresses the recorded gap: Connector and application translation blocks overlap a GlobalProtect client address pool. The architectural control is Redesign the ZTNA Connector application and connector IP block allocations to be disjoint from existing pools. The decisive test is Validate configured CIDRs against the service infrastructure, GlobalProtect pools, and data-center advertised prefixes. The objective is Connector translation and client addressing are unambiguous in the selected Prisma Access topology. Case R152-C078; angle 1; post-pilot control gap; option considered: Redesign the ZTNA Connector application and connector IP block allocations to be disjoint from existing pools.
Incorrect Answers
A:This option addresses a different design objective: Regional Prisma Access latency design, not the primary control for ztna connector ip block isolation. It would be relevant where A global business routes overseas private-app sessions through a distant single service location. Here the necessary evidence is Validate configured CIDRs against the service infrastructure, GlobalProtect pools, and data-center advertised prefixes. Case R152-C078; angle 1; post-pilot control gap; option considered: Select regional Prisma Access service locations and a measured traffic on/off-ramp strategy for users and apps.
C:This option addresses a different design objective: ZTNA Connector FQDN onboarding, not the primary control for ztna connector ip block isolation. It would be relevant where The enterprise wants private FQDN applications reachable without manual IPsec tunnels to every cloud region. Here the necessary evidence is Validate configured CIDRs against the service infrastructure, GlobalProtect pools, and data-center advertised prefixes. Case R152-C078; angle 1; post-pilot control gap; option considered: Use supported ZTNA Connector deployment with defined private app targets and connector-to-service connectivity.
D:This option addresses a different design objective: Overlapping private address domains, not the primary control for ztna connector ip block isolation. It would be relevant where Two acquisitions use identical internal RFC1918 subnets and legacy service connections cannot distinguish destinations. Here the necessary evidence is Validate configured CIDRs against the service infrastructure, GlobalProtect pools, and data-center advertised prefixes. Case R152-C078; angle 1; post-pilot control gap; option considered: Evaluate the ZTNA Connector overlap-handling model and separate application/connector IP blocks.
Question 310
Which validation most directly demonstrates ztna connector ip block isolation is correctly designed for Technology research institute? After Technology research institute completed a limited security transformation pilot, reviewers observed a control gap: Connector and application translation blocks overlap a GlobalProtect client address pool. The case assumes the affected flows and dependencies have been traced and all unrelated systems are functioning; choose the narrow design repair before wider deployment.
- For Technology research institute: Withdraw a planned route during maintenance and verify convergence and private-app session outcomes.
- For Technology research institute: Trace a test campus-to-private-app flow through the selected colocation on-ramp and failure path.
- For Technology research institute: Measure synthetic private-app round trips from multiple regions through expected service and application paths.
- For Technology research institute: Validate configured CIDRs against the service infrastructure, GlobalProtect pools, and data-center advertised prefixes.
Explanation
Correct Answer
D:This checks the relevant ztna connector ip block isolation enforcement path rather than a distant symptom. Validate configured CIDRs against the service infrastructure, GlobalProtect pools, and data-center advertised prefixes. The expected evidence is Connector translation and client addressing are unambiguous in the selected Prisma Access topology. Case R152-C078; angle 2; post-pilot control gap; option considered: Validate configured CIDRs against the service infrastructure, GlobalProtect pools, and data-center advertised prefixes.
Incorrect Answers
A:This option addresses a different design objective: Private-app service connection failover, not the primary control for ztna connector ip block isolation. It would be relevant where A data-center service connection drops and policy permits an inaccessible route to remain preferred. Here the necessary evidence is Validate configured CIDRs against the service infrastructure, GlobalProtect pools, and data-center advertised prefixes. Case R152-C078; angle 2; post-pilot control gap; option considered: Withdraw a planned route during maintenance and verify convergence and private-app session outcomes.
B:This option addresses a different design objective: Colo-connected private on-ramp, not the primary control for ztna connector ip block isolation. It would be relevant where A high-volume colocation campus needs predictable access to Prisma Access without routing all private traffic through the public internet. Here the necessary evidence is Validate configured CIDRs against the service infrastructure, GlobalProtect pools, and data-center advertised prefixes. Case R152-C078; angle 2; post-pilot control gap; option considered: Trace a test campus-to-private-app flow through the selected colocation on-ramp and failure path.
C:This option addresses a different design objective: Regional Prisma Access latency design, not the primary control for ztna connector ip block isolation. It would be relevant where A global business routes overseas private-app sessions through a distant single service location. Here the necessary evidence is Validate configured CIDRs against the service infrastructure, GlobalProtect pools, and data-center advertised prefixes. Case R152-C078; angle 2; post-pilot control gap; option considered: Measure synthetic private-app round trips from multiple regions through expected service and application paths.
Palo Alto Networks Network Security Architect (NetSec-Architect) Practice Tests