100% Latest & Updated Palo Alto Networks NetSec-Architect Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!
Question 420
Select THREE linked elements for Global professional services firm: a supported architecture, the direct test, and the required outcome. The security architecture board of Global professional services firm is preparing a new Modernizing Branches program. The stakeholders have given the following specific requirement: A single ION appliance at a distribution branch is the point of failure for voice and order processing. No existing change is being reverted; select the most directly justified architecture for this stated requirement.
- For Global professional services firm: The branch retains the required WAN service after the specified ION device failure.
- For Global professional services firm: Design the supported Prisma SD-WAN branch HA group with active and backup ION devices and fail-to-wire considerations.
- For Global professional services firm: Risky destinations receive the intended protective action and business resolution still works.
- For Global professional services firm: Use the supported branch App-ID controls at the selected enforcement point and define permitted applications.
- For Global professional services firm: Fail the active test ION and inspect active role election, forwarding continuity and route health.
- For Global professional services firm: Install a second ION without pairing it in an HA group and assume automatic synchronized failover.
Explanation
Correct Answer
A:The required end state is The branch retains the required WAN service after the specified ION device failure. The architect must deploy Design the supported Prisma SD-WAN branch HA group with active and backup ION devices and fail-to-wire considerations. and validate using Fail the active test ION and inspect active role election, forwarding continuity and route health. Case R152-C105; angle 4; architecture design; option considered: The branch retains the required WAN service after the specified ION device failure.
B:This directly addresses the recorded gap: A single ION appliance at a distribution branch is the point of failure for voice and order processing. The architectural control is Design the supported Prisma SD-WAN branch HA group with active and backup ION devices and fail-to-wire considerations. The decisive test is Fail the active test ION and inspect active role election, forwarding continuity and route health. The objective is The branch retains the required WAN service after the specified ION device failure. Case R152-C105; angle 4; architecture design; option considered: Design the supported Prisma SD-WAN branch HA group with active and backup ION devices and fail-to-wire considerations.
E:This checks the relevant ion branch high availability enforcement path rather than a distant symptom. Fail the active test ION and inspect active role election, forwarding continuity and route health. The expected evidence is The branch retains the required WAN service after the specified ION device failure. Case R152-C105; angle 4; architecture design; option considered: Fail the active test ION and inspect active role election, forwarding continuity and route health.
Incorrect Answers
C:This option addresses a different design objective: Branch DNS and URL threat controls, not the primary control for ion branch high availability. It would be relevant where A branch security rollout allows DNS requests to malicious destinations and treats routing success as security success. Here the necessary evidence is Fail the active test ION and inspect active role election, forwarding continuity and route health. Case R152-C105; angle 4; architecture design; option considered: Risky destinations receive the intended protective action and business resolution still works.
D:App-ID branch security addresses a different architectural concern, such as when a branch policy allows any traffic over TCP 443 because application identities are never distinguished. It does not establish ion branch high availability here. The decisive test is to fail the active test ION and inspect active role election, forwarding continuity and route health.
F:This is an unsafe or insufficient shortcut for ion branch high availability: Install a second ION without pairing it in an HA group and assume automatic synchronized failover. The scoped requirement instead calls for Design the supported Prisma SD-WAN branch HA group with active and backup ION devices and fail-to-wire considerations.
Question 421
For European medical campus, which is the most directly supported architectural control for ion branch high availability? After European medical campus completed a limited security transformation pilot, reviewers observed a control gap: A single ION appliance at a distribution branch is the point of failure for voice and order processing. The case assumes the affected flows and dependencies have been traced and all unrelated systems are functioning; choose the narrow design repair before wider deployment.
- For European medical campus: Design the supported Prisma SD-WAN branch HA group with active and backup ION devices and fail-to-wire considerations.
- For European medical campus: Design appropriate URL filtering, DNS security and threat profiles at the branch's actual enforcement point.
- For European medical campus: Design an appropriately licensed Prisma Access remote-network tunnel and route advertisement with a branch failover plan.
- For European medical campus: Move the architecture to supported Prisma SD-WAN Control mode with approved forwarding and service topology.
Explanation
Correct Answer
A:This directly addresses the recorded gap: A single ION appliance at a distribution branch is the point of failure for voice and order processing. The architectural control is Design the supported Prisma SD-WAN branch HA group with active and backup ION devices and fail-to-wire considerations. The decisive test is Fail the active test ION and inspect active role election, forwarding continuity and route health. The objective is The branch retains the required WAN service after the specified ION device failure. Case R152-C106; angle 1; post-pilot control gap; option considered: Design the supported Prisma SD-WAN branch HA group with active and backup ION devices and fail-to-wire considerations.
Incorrect Answers
B:This option addresses a different design objective: Branch DNS and URL threat controls, not the primary control for ion branch high availability. It would be relevant where A branch security rollout allows DNS requests to malicious destinations and treats routing success as security success. Here the necessary evidence is Fail the active test ION and inspect active role election, forwarding continuity and route health. Case R152-C106; angle 1; post-pilot control gap; option considered: Design appropriate URL filtering, DNS security and threat profiles at the branch's actual enforcement point.
C:This option addresses a different design objective: Remote networks into Prisma Access, not the primary control for ion branch high availability. It would be relevant where A new warehouse branch needs centralized cloud security but lacks a controlled site-to-service traffic on-ramp. Here the necessary evidence is Fail the active test ION and inspect active role election, forwarding continuity and route health. Case R152-C106; angle 1; post-pilot control gap; option considered: Design an appropriately licensed Prisma Access remote-network tunnel and route advertisement with a branch failover plan.
D:Prisma SD-WAN analytics versus control addresses a different architectural concern, such as when a branch ION is in Analytics mode and operators expect it to steer applications across two MPLS links. It does not establish ion branch high availability here. The decisive test is to fail the active test ION and inspect active role election, forwarding continuity and route health.
Question 422
Which validation most directly demonstrates ion branch high availability is correctly designed for European medical campus? After European medical campus completed a limited security transformation pilot, reviewers observed a control gap: A single ION appliance at a distribution branch is the point of failure for voice and order processing. The case assumes the affected flows and dependencies have been traced and all unrelated systems are functioning; choose the narrow design repair before wider deployment.
- For European medical campus: Verify a test third-party tunnel, permitted app traffic and branch-failure behavior against the handoff.
- For European medical campus: Document the chosen hardware, software and management prerequisites and validate link failover in a pilot.
- For European medical campus: Fail the active test ION and inspect active role election, forwarding continuity and route health.
- For European medical campus: Bring up a test branch tunnel and verify selected SaaS and private flows traverse their intended inspection path.
Explanation
Correct Answer
C:This checks the relevant ion branch high availability enforcement path rather than a distant symptom. Fail the active test ION and inspect active role election, forwarding continuity and route health. The expected evidence is The branch retains the required WAN service after the specified ION device failure. Case R152-C106; angle 2; post-pilot control gap; option considered: Fail the active test ION and inspect active role election, forwarding continuity and route health.
Incorrect Answers
A:Third-party SD-WAN branch on-ramp addresses a different architectural concern, such as when an acquired business keeps a third-party SD-WAN edge but must use common cloud security controls. It does not establish ion branch high availability here. The decisive test is to fail the active test ION and inspect active role election, forwarding continuity and route health.
B:PAN-OS SD-WAN for existing NGFW addresses a different architectural concern, such as when a remote office already owns PAN-OS firewalls and requires SD-WAN functionality without replacing its edge fleet. It does not establish ion branch high availability here. The decisive test is to fail the active test ION and inspect active role election, forwarding continuity and route health.
D:This option addresses a different design objective: Remote networks into Prisma Access, not the primary control for ion branch high availability. It would be relevant where A new warehouse branch needs centralized cloud security but lacks a controlled site-to-service traffic on-ramp. Here the necessary evidence is Fail the active test ION and inspect active role election, forwarding continuity and route health. Case R152-C106; angle 2; post-pilot control gap; option considered: Bring up a test branch tunnel and verify selected SaaS and private flows traverse their intended inspection path.
Question 423
Which design assumption should the architect REJECT when evaluating ion branch high availability for European medical campus? After European medical campus completed a limited security transformation pilot, reviewers observed a control gap: A single ION appliance at a distribution branch is the point of failure for voice and order processing. The case assumes the affected flows and dependencies have been traced and all unrelated systems are functioning; choose the narrow design repair before wider deployment.
- For European medical campus: The branch retains the required WAN service after the specified ION device failure.
- For European medical campus: Design the supported Prisma SD-WAN branch HA group with active and backup ION devices and fail-to-wire considerations.
- For European medical campus: Install a second ION without pairing it in an HA group and assume automatic synchronized failover.
- For European medical campus: Fail the active test ION and inspect active role election, forwarding continuity and route health.
Explanation
Correct Answer
C:Reject this assumption: Install a second ION without pairing it in an HA group and assume automatic synchronized failover. It does not establish ion branch high availability; the supported architecture is Design the supported Prisma SD-WAN branch HA group with active and backup ION devices and fail-to-wire considerations. Verify it by: Fail the active test ION and inspect active role election, forwarding continuity and route health. Case R152-C106; angle 3; post-pilot control gap; option considered: Install a second ION without pairing it in an HA group and assume automatic synchronized failover.
Incorrect Answers
A:This is a valid design/control/evidence statement in the specified case, not the assumption to reject. The branch retains the required WAN service after the specified ION device failure. It is consistent with the required outcome: The branch retains the required WAN service after the specified ION device failure. Case R152-C106; angle 3; post-pilot control gap; option considered: The branch retains the required WAN service after the specified ION device failure.
B:This is a valid design/control/evidence statement in the specified case, not the assumption to reject. Design the supported Prisma SD-WAN branch HA group with active and backup ION devices and fail-to-wire considerations. It is consistent with the required outcome: The branch retains the required WAN service after the specified ION device failure. Case R152-C106; angle 3; post-pilot control gap; option considered: Design the supported Prisma SD-WAN branch HA group with active and backup ION devices and fail-to-wire considerations.
D:This is a valid design/control/evidence statement in the specified case, not the assumption to reject. Fail the active test ION and inspect active role election, forwarding continuity and route health. It is consistent with the required outcome: The branch retains the required WAN service after the specified ION device failure. Case R152-C106; angle 3; post-pilot control gap; option considered: Fail the active test ION and inspect active role election, forwarding continuity and route health.
Question 424
Which measurable end state best satisfies the stated ion branch high availability requirement for European medical campus? After European medical campus completed a limited security transformation pilot, reviewers observed a control gap: A single ION appliance at a distribution branch is the point of failure for voice and order processing. The case assumes the affected flows and dependencies have been traced and all unrelated systems are functioning; choose the narrow design repair before wider deployment.
- For European medical campus: Device class controls persist through IP changes while legitimate printing continues.
- For European medical campus: Internet and private application traffic each use measured approved inspection and latency paths.
- For European medical campus: Risky destinations receive the intended protective action and business resolution still works.
- For European medical campus: The branch retains the required WAN service after the specified ION device failure.
Explanation
Correct Answer
D:The required end state is The branch retains the required WAN service after the specified ION device failure. The architect must deploy Design the supported Prisma SD-WAN branch HA group with active and backup ION devices and fail-to-wire considerations. and validate using Fail the active test ION and inspect active role election, forwarding continuity and route health. Case R152-C106; angle 4; post-pilot control gap; option considered: The branch retains the required WAN service after the specified ION device failure.
Incorrect Answers
A:Device-ID for branch printers addresses a different architectural concern, such as when short-lived branch printers obtain changing leases and inherit the same outbound access as employee laptops. It does not establish ion branch high availability here. The decisive test is to fail the active test ION and inspect active role election, forwarding continuity and route health.
B:This option addresses a different design objective: Branch SaaS local-breakout tradeoff, not the primary control for ion branch high availability. It would be relevant where A regional SASE migration backhauls SaaS flows through a central headquarters and violates voice latency targets. Here the necessary evidence is Fail the active test ION and inspect active role election, forwarding continuity and route health. Case R152-C106; angle 4; post-pilot control gap; option considered: Internet and private application traffic each use measured approved inspection and latency paths.
C:This option addresses a different design objective: Branch DNS and URL threat controls, not the primary control for ion branch high availability. It would be relevant where A branch security rollout allows DNS requests to malicious destinations and treats routing success as security success. Here the necessary evidence is Fail the active test ION and inspect active role election, forwarding continuity and route health. Case R152-C106; angle 4; post-pilot control gap; option considered: Risky destinations receive the intended protective action and business resolution still works.
Question 425
For Latin American logistics group, which is the most directly supported architectural control for application-aware path sla? The security architecture board of Latin American logistics group is preparing a new Modernizing Branches program. The stakeholders have given the following specific requirement: Critical real-time voice flows use a high-loss internet link while a healthy low-jitter link is idle. No existing change is being reverted; select the most directly justified architecture for this stated requirement.
- For Latin American logistics group: Plan a supported third-party edge IPsec remote-network on-ramp and explicit routing/failure ownership.
- For Latin American logistics group: Compare a supported PAN-OS SD-WAN architecture and licensing with a separate Prisma SD-WAN ION deployment.
- For Latin American logistics group: Design an appropriately licensed Prisma Access remote-network tunnel and route advertisement with a branch failover plan.
- For Latin American logistics group: Define Prisma SD-WAN application path policies using measured loss, latency and jitter objectives.
Explanation
Correct Answer
D:This directly addresses the recorded gap: Critical real-time voice flows use a high-loss internet link while a healthy low-jitter link is idle. The architectural control is Define Prisma SD-WAN application path policies using measured loss, latency and jitter objectives. The decisive test is Degrade a test link and inspect path selection for voice versus bulk transfer applications. The objective is Latency-sensitive applications prefer paths meeting the chosen SLA while bulk traffic follows its own policy. Case R152-C107; angle 1; architecture design; option considered: Define Prisma SD-WAN application path policies using measured loss, latency and jitter objectives.
Incorrect Answers
A:Third-party SD-WAN branch on-ramp addresses a different architectural concern, such as when an acquired business keeps a third-party SD-WAN edge but must use common cloud security controls. It does not establish application-aware path sla here. The decisive test is to degrade a test link and inspect path selection for voice versus bulk transfer applications.
B:This option addresses a different design objective: PAN-OS SD-WAN for existing NGFW, not the primary control for application-aware path sla. It would be relevant where A remote office already owns PAN-OS firewalls and requires SD-WAN functionality without replacing its edge fleet. Here the necessary evidence is Degrade a test link and inspect path selection for voice versus bulk transfer applications. Case R152-C107; angle 1; architecture design; option considered: Compare a supported PAN-OS SD-WAN architecture and licensing with a separate Prisma SD-WAN ION deployment.
C:This option addresses a different design objective: Remote networks into Prisma Access, not the primary control for application-aware path sla. It would be relevant where A new warehouse branch needs centralized cloud security but lacks a controlled site-to-service traffic on-ramp. Here the necessary evidence is Degrade a test link and inspect path selection for voice versus bulk transfer applications. Case R152-C107; angle 1; architecture design; option considered: Design an appropriately licensed Prisma Access remote-network tunnel and route advertisement with a branch failover plan.
Question 426
Which validation most directly demonstrates application-aware path sla is correctly designed for Latin American logistics group? The security architecture board of Latin American logistics group is preparing a new Modernizing Branches program. The stakeholders have given the following specific requirement: Critical real-time voice flows use a high-loss internet link while a healthy low-jitter link is idle. No existing change is being reverted; select the most directly justified architecture for this stated requirement.
- For Latin American logistics group: Bring up a test branch tunnel and verify selected SaaS and private flows traverse their intended inspection path.
- For Latin American logistics group: Test blocked known-sample domains and approved business domains while inspecting the threat logs.
- For Latin American logistics group: Fail the active test ION and inspect active role election, forwarding continuity and route health.
- For Latin American logistics group: Degrade a test link and inspect path selection for voice versus bulk transfer applications.
Explanation
Correct Answer
D:This checks the relevant application-aware path sla enforcement path rather than a distant symptom. Degrade a test link and inspect path selection for voice versus bulk transfer applications. The expected evidence is Latency-sensitive applications prefer paths meeting the chosen SLA while bulk traffic follows its own policy. Case R152-C107; angle 2; architecture design; option considered: Degrade a test link and inspect path selection for voice versus bulk transfer applications.
Incorrect Answers
A:This option addresses a different design objective: Remote networks into Prisma Access, not the primary control for application-aware path sla. It would be relevant where A new warehouse branch needs centralized cloud security but lacks a controlled site-to-service traffic on-ramp. Here the necessary evidence is Degrade a test link and inspect path selection for voice versus bulk transfer applications. Case R152-C107; angle 2; architecture design; option considered: Bring up a test branch tunnel and verify selected SaaS and private flows traverse their intended inspection path.
B:Branch DNS and URL threat controls addresses a different architectural concern, such as when a branch security rollout allows DNS requests to malicious destinations and treats routing success as security success. It does not establish application-aware path sla here. The decisive test is to degrade a test link and inspect path selection for voice versus bulk transfer applications.
C:This option addresses a different design objective: ION branch high availability, not the primary control for application-aware path sla. It would be relevant where A single ION appliance at a distribution branch is the point of failure for voice and order processing. Here the necessary evidence is Degrade a test link and inspect path selection for voice versus bulk transfer applications. Case R152-C107; angle 2; architecture design; option considered: Fail the active test ION and inspect active role election, forwarding continuity and route health.
Question 427
Which design assumption should the architect REJECT when evaluating application-aware path sla for Latin American logistics group? The security architecture board of Latin American logistics group is preparing a new Modernizing Branches program. The stakeholders have given the following specific requirement: Critical real-time voice flows use a high-loss internet link while a healthy low-jitter link is idle. No existing change is being reverted; select the most directly justified architecture for this stated requirement.
- For Latin American logistics group: Degrade a test link and inspect path selection for voice versus bulk transfer applications.
- For Latin American logistics group: Choose the WAN circuit with the largest nominal bandwidth for every application regardless of quality.
- For Latin American logistics group: Latency-sensitive applications prefer paths meeting the chosen SLA while bulk traffic follows its own policy.
- For Latin American logistics group: Define Prisma SD-WAN application path policies using measured loss, latency and jitter objectives.
Explanation
Correct Answer
B:Reject this assumption: Choose the WAN circuit with the largest nominal bandwidth for every application regardless of quality. It does not establish application-aware path sla; the supported architecture is Define Prisma SD-WAN application path policies using measured loss, latency and jitter objectives. Verify it by: Degrade a test link and inspect path selection for voice versus bulk transfer applications. Case R152-C107; angle 3; architecture design; option considered: Choose the WAN circuit with the largest nominal bandwidth for every application regardless of quality.
Incorrect Answers
A:This is a valid design/control/evidence statement in the specified case, not the assumption to reject. Degrade a test link and inspect path selection for voice versus bulk transfer applications. It is consistent with the required outcome: Latency-sensitive applications prefer paths meeting the chosen SLA while bulk traffic follows its own policy. Case R152-C107; angle 3; architecture design; option considered: Degrade a test link and inspect path selection for voice versus bulk transfer applications.
C:This is a valid design/control/evidence statement in the specified case, not the assumption to reject. Latency-sensitive applications prefer paths meeting the chosen SLA while bulk traffic follows its own policy. It is consistent with the required outcome: Latency-sensitive applications prefer paths meeting the chosen SLA while bulk traffic follows its own policy. Case R152-C107; angle 3; architecture design; option considered: Latency-sensitive applications prefer paths meeting the chosen SLA while bulk traffic follows its own policy.
D:This is a valid design/control/evidence statement in the specified case, not the assumption to reject. Define Prisma SD-WAN application path policies using measured loss, latency and jitter objectives. It is consistent with the required outcome: Latency-sensitive applications prefer paths meeting the chosen SLA while bulk traffic follows its own policy. Case R152-C107; angle 3; architecture design; option considered: Define Prisma SD-WAN application path policies using measured loss, latency and jitter objectives.
Question 428
Select TWO directly linked controls for Latin American logistics group: the architectural remedy and its decisive validation. The security architecture board of Latin American logistics group is preparing a new Modernizing Branches program. The stakeholders have given the following specific requirement: Critical real-time voice flows use a high-loss internet link while a healthy low-jitter link is idle. No existing change is being reverted; select the most directly justified architecture for this stated requirement.
- For Latin American logistics group: Design an appropriately licensed Prisma Access remote-network tunnel and route advertisement with a branch failover plan.
- For Latin American logistics group: Introduce controlled latency on one link and compare service health, path changes and ADEM signals.
- For Latin American logistics group: Define Prisma SD-WAN application path policies using measured loss, latency and jitter objectives.
- For Latin American logistics group: Degrade a test link and inspect path selection for voice versus bulk transfer applications.
- For Latin American logistics group: Choose the WAN circuit with the largest nominal bandwidth for every application regardless of quality.
Explanation
Correct Answer
C:This directly addresses the recorded gap: Critical real-time voice flows use a high-loss internet link while a healthy low-jitter link is idle. The architectural control is Define Prisma SD-WAN application path policies using measured loss, latency and jitter objectives. The decisive test is Degrade a test link and inspect path selection for voice versus bulk transfer applications. The objective is Latency-sensitive applications prefer paths meeting the chosen SLA while bulk traffic follows its own policy. Case R152-C107; angle 4; architecture design; option considered: Define Prisma SD-WAN application path policies using measured loss, latency and jitter objectives.
D:This checks the relevant application-aware path sla enforcement path rather than a distant symptom. Degrade a test link and inspect path selection for voice versus bulk transfer applications. The expected evidence is Latency-sensitive applications prefer paths meeting the chosen SLA while bulk traffic follows its own policy. Case R152-C107; angle 4; architecture design; option considered: Degrade a test link and inspect path selection for voice versus bulk transfer applications.
Incorrect Answers
A:This option addresses a different design objective: Remote networks into Prisma Access, not the primary control for application-aware path sla. It would be relevant where A new warehouse branch needs centralized cloud security but lacks a controlled site-to-service traffic on-ramp. Here the necessary evidence is Degrade a test link and inspect path selection for voice versus bulk transfer applications. Case R152-C107; angle 4; architecture design; option considered: Design an appropriately licensed Prisma Access remote-network tunnel and route advertisement with a branch failover plan.
B:Branch experience telemetry addresses a different architectural concern, such as when a store complains of slow ERP service after SD-WAN rollout, but operations cannot distinguish provider jitter from policy denial. It does not establish application-aware path sla here. The decisive test is to degrade a test link and inspect path selection for voice versus bulk transfer applications.
E:This is an unsafe or insufficient shortcut for application-aware path sla: Choose the WAN circuit with the largest nominal bandwidth for every application regardless of quality. The scoped requirement instead calls for Define Prisma SD-WAN application path policies using measured loss, latency and jitter objectives. Case R152-C107; angle 4; architecture design; option considered: Choose the WAN circuit with the largest nominal bandwidth for every application regardless of quality.
Question 429
For Cloud-native manufacturing firm, which is the most directly supported architectural control for application-aware path sla? After Cloud-native manufacturing firm completed a limited security transformation pilot, reviewers observed a control gap: Critical real-time voice flows use a high-loss internet link while a healthy low-jitter link is idle. The case assumes the affected flows and dependencies have been traced and all unrelated systems are functioning; choose the narrow design repair before wider deployment.
- For Cloud-native manufacturing firm: Compare a supported PAN-OS SD-WAN architecture and licensing with a separate Prisma SD-WAN ION deployment.
- For Cloud-native manufacturing firm: Define Prisma SD-WAN application path policies using measured loss, latency and jitter objectives.
- For Cloud-native manufacturing firm: Move the architecture to supported Prisma SD-WAN Control mode with approved forwarding and service topology.
- For Cloud-native manufacturing firm: Evaluate branch direct internet breakout through local Prisma Access security versus centralized transit for private apps.
Explanation
Correct Answer
B:This directly addresses the recorded gap: Critical real-time voice flows use a high-loss internet link while a healthy low-jitter link is idle. The architectural control is Define Prisma SD-WAN application path policies using measured loss, latency and jitter objectives. The decisive test is Degrade a test link and inspect path selection for voice versus bulk transfer applications. The objective is Latency-sensitive applications prefer paths meeting the chosen SLA while bulk traffic follows its own policy. Case R152-C108; angle 1; post-pilot control gap; option considered: Define Prisma SD-WAN application path policies using measured loss, latency and jitter objectives.
Incorrect Answers
A:This option addresses a different design objective: PAN-OS SD-WAN for existing NGFW, not the primary control for application-aware path sla. It would be relevant where A remote office already owns PAN-OS firewalls and requires SD-WAN functionality without replacing its edge fleet. Here the necessary evidence is Degrade a test link and inspect path selection for voice versus bulk transfer applications. Case R152-C108; angle 1; post-pilot control gap; option considered: Compare a supported PAN-OS SD-WAN architecture and licensing with a separate Prisma SD-WAN ION deployment.
C:Prisma SD-WAN analytics versus control addresses a different architectural concern, such as when a branch ION is in Analytics mode and operators expect it to steer applications across two MPLS links. It does not establish application-aware path sla here. The decisive test is to degrade a test link and inspect path selection for voice versus bulk transfer applications.
D:This option addresses a different design objective: Branch SaaS local-breakout tradeoff, not the primary control for application-aware path sla. It would be relevant where A regional SASE migration backhauls SaaS flows through a central headquarters and violates voice latency targets. Here the necessary evidence is Degrade a test link and inspect path selection for voice versus bulk transfer applications. Case R152-C108; angle 1; post-pilot control gap; option considered: Evaluate branch direct internet breakout through local Prisma Access security versus centralized transit for private apps.
Question 430
Which validation most directly demonstrates application-aware path sla is correctly designed for Cloud-native manufacturing firm? After Cloud-native manufacturing firm completed a limited security transformation pilot, reviewers observed a control gap: Critical real-time voice flows use a high-loss internet link while a healthy low-jitter link is idle. The case assumes the affected flows and dependencies have been traced and all unrelated systems are functioning; choose the narrow design repair before wider deployment.
- For Cloud-native manufacturing firm: Degrade a test link and inspect path selection for voice versus bulk transfer applications.
- For Cloud-native manufacturing firm: Fail the active test ION and inspect active role election, forwarding continuity and route health.
- For Cloud-native manufacturing firm: Document the chosen hardware, software and management prerequisites and validate link failover in a pilot.
- For Cloud-native manufacturing firm: Measure branch-to-SaaS and branch-to-data-center flow paths before and after the pilot.
Explanation
Correct Answer
A:This checks the relevant application-aware path sla enforcement path rather than a distant symptom. Degrade a test link and inspect path selection for voice versus bulk transfer applications. The expected evidence is Latency-sensitive applications prefer paths meeting the chosen SLA while bulk traffic follows its own policy. Case R152-C108; angle 2; post-pilot control gap; option considered: Degrade a test link and inspect path selection for voice versus bulk transfer applications.
Incorrect Answers
B:This option addresses a different design objective: ION branch high availability, not the primary control for application-aware path sla. It would be relevant where A single ION appliance at a distribution branch is the point of failure for voice and order processing. Here the necessary evidence is Degrade a test link and inspect path selection for voice versus bulk transfer applications. Case R152-C108; angle 2; post-pilot control gap; option considered: Fail the active test ION and inspect active role election, forwarding continuity and route health.
C:This option addresses a different design objective: PAN-OS SD-WAN for existing NGFW, not the primary control for application-aware path sla. It would be relevant where A remote office already owns PAN-OS firewalls and requires SD-WAN functionality without replacing its edge fleet. Here the necessary evidence is Degrade a test link and inspect path selection for voice versus bulk transfer applications. Case R152-C108; angle 2; post-pilot control gap; option considered: Document the chosen hardware, software and management prerequisites and validate link failover in a pilot.
D:This option addresses a different design objective: Branch SaaS local-breakout tradeoff, not the primary control for application-aware path sla. It would be relevant where A regional SASE migration backhauls SaaS flows through a central headquarters and violates voice latency targets. Here the necessary evidence is Degrade a test link and inspect path selection for voice versus bulk transfer applications. Case R152-C108; angle 2; post-pilot control gap; option considered: Measure branch-to-SaaS and branch-to-data-center flow paths before and after the pilot.
Palo Alto Networks Network Security Architect (NetSec-Architect) Practice Tests