100% Latest & Updated Palo Alto Networks NetSec-Architect Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!
Question 460
Select THREE linked elements for Technology research institute: a supported architecture, the direct test, and the required outcome. The security architecture board of Technology research institute is preparing a new Modernizing Branches program. The stakeholders have given the following specific requirement: A branch policy allows any traffic over TCP 443 because application identities are never distinguished. No existing change is being reverted; select the most directly justified architecture for this stated requirement.
- For Technology research institute: Use the supported branch App-ID controls at the selected enforcement point and define permitted applications.
- For Technology research institute: Branch users gain app-specific access rather than unrestricted HTTPS permission.
- For Technology research institute: Risky destinations receive the intended protective action and business resolution still works.
- For Technology research institute: Define branch security exclusively by port and assume HTTPS equals the approved app.
- For Technology research institute: Define Prisma SD-WAN application path policies using measured loss, latency and jitter objectives.
- For Technology research institute: Test allowed corporate SaaS and disallowed application traffic that share TCP 443.
Explanation
Correct Answer
A:This directly addresses the recorded gap: A branch policy allows any traffic over TCP 443 because application identities are never distinguished. The architectural control is Use the supported branch App-ID controls at the selected enforcement point and define permitted applications. The decisive test is Test allowed corporate SaaS and disallowed application traffic that share TCP 443. The objective is Branch users gain app-specific access rather than unrestricted HTTPS permission. Case R152-C115; angle 4; architecture design; option considered: Use the supported branch App-ID controls at the selected enforcement point and define permitted applications.
B:The required end state is Branch users gain app-specific access rather than unrestricted HTTPS permission. The architect must deploy Use the supported branch App-ID controls at the selected enforcement point and define permitted applications. and validate using Test allowed corporate SaaS and disallowed application traffic that share TCP 443. Case R152-C115; angle 4; architecture design; option considered: Branch users gain app-specific access rather than unrestricted HTTPS permission.
F:This checks the relevant app-id branch security enforcement path rather than a distant symptom. Test allowed corporate SaaS and disallowed application traffic that share TCP 443. The expected evidence is Branch users gain app-specific access rather than unrestricted HTTPS permission. Case R152-C115; angle 4; architecture design; option considered: Test allowed corporate SaaS and disallowed application traffic that share TCP 443.
Incorrect Answers
C:Branch DNS and URL threat controls addresses a different architectural concern, such as when a branch security rollout allows DNS requests to malicious destinations and treats routing success as security success. It does not establish app-id branch security here. The decisive test is to test allowed corporate SaaS and disallowed application traffic that share TCP 443.
D:This is an unsafe or insufficient shortcut for app-id branch security: Define branch security exclusively by port and assume HTTPS equals the approved app. The scoped requirement instead calls for Use the supported branch App-ID controls at the selected enforcement point and define permitted applications.
E:This option addresses a different design objective: Application-aware path SLA, not the primary control for app-id branch security. It would be relevant where Critical real-time voice flows use a high-loss internet link while a healthy low-jitter link is idle. Here the necessary evidence is Test allowed corporate SaaS and disallowed application traffic that share TCP 443. Case R152-C115; angle 4; architecture design; option considered: Define Prisma SD-WAN application path policies using measured loss, latency and jitter objectives.
Question 461
For EMEA public university, which is the most directly supported architectural control for app-id branch security? After EMEA public university completed a limited security transformation pilot, reviewers observed a control gap: A branch policy allows any traffic over TCP 443 because application identities are never distinguished. The case assumes the affected flows and dependencies have been traced and all unrelated systems are functioning; choose the narrow design repair before wider deployment.
- For EMEA public university: Compare a supported PAN-OS SD-WAN architecture and licensing with a separate Prisma SD-WAN ION deployment.
- For EMEA public university: Use the supported branch App-ID controls at the selected enforcement point and define permitted applications.
- For EMEA public university: Plan a supported third-party edge IPsec remote-network on-ramp and explicit routing/failure ownership.
- For EMEA public university: Combine link SLA measurements, ION telemetry and ADEM experience visibility where applicable.
Explanation
Correct Answer
B:This directly addresses the recorded gap: A branch policy allows any traffic over TCP 443 because application identities are never distinguished. The architectural control is Use the supported branch App-ID controls at the selected enforcement point and define permitted applications. The decisive test is Test allowed corporate SaaS and disallowed application traffic that share TCP 443. The objective is Branch users gain app-specific access rather than unrestricted HTTPS permission. Case R152-C116; angle 1; post-pilot control gap; option considered: Use the supported branch App-ID controls at the selected enforcement point and define permitted applications.
Incorrect Answers
A:This option addresses a different design objective: PAN-OS SD-WAN for existing NGFW, not the primary control for app-id branch security. It would be relevant where A remote office already owns PAN-OS firewalls and requires SD-WAN functionality without replacing its edge fleet. Here the necessary evidence is Test allowed corporate SaaS and disallowed application traffic that share TCP 443. Case R152-C116; angle 1; post-pilot control gap; option considered: Compare a supported PAN-OS SD-WAN architecture and licensing with a separate Prisma SD-WAN ION deployment.
C:This option addresses a different design objective: Third-party SD-WAN branch on-ramp, not the primary control for app-id branch security. It would be relevant where An acquired business keeps a third-party SD-WAN edge but must use common cloud security controls. Here the necessary evidence is Test allowed corporate SaaS and disallowed application traffic that share TCP 443. Case R152-C116; angle 1; post-pilot control gap; option considered: Plan a supported third-party edge IPsec remote-network on-ramp and explicit routing/failure ownership.
D:Branch experience telemetry addresses a different architectural concern, such as when a store complains of slow ERP service after SD-WAN rollout, but operations cannot distinguish provider jitter from policy denial. It does not establish app-id branch security here. The decisive test is to test allowed corporate SaaS and disallowed application traffic that share TCP 443.
Question 462
Which validation most directly demonstrates app-id branch security is correctly designed for EMEA public university? After EMEA public university completed a limited security transformation pilot, reviewers observed a control gap: A branch policy allows any traffic over TCP 443 because application identities are never distinguished. The case assumes the affected flows and dependencies have been traced and all unrelated systems are functioning; choose the narrow design repair before wider deployment.
- For EMEA public university: Test allowed corporate SaaS and disallowed application traffic that share TCP 443.
- For EMEA public university: Degrade a test link and inspect path selection for voice versus bulk transfer applications.
- For EMEA public university: Fail the active test ION and inspect active role election, forwarding continuity and route health.
- For EMEA public university: Document the chosen hardware, software and management prerequisites and validate link failover in a pilot.
Explanation
Correct Answer
A:This checks the relevant app-id branch security enforcement path rather than a distant symptom. Test allowed corporate SaaS and disallowed application traffic that share TCP 443. The expected evidence is Branch users gain app-specific access rather than unrestricted HTTPS permission. Case R152-C116; angle 2; post-pilot control gap; option considered: Test allowed corporate SaaS and disallowed application traffic that share TCP 443.
Incorrect Answers
B:This option addresses a different design objective: Application-aware path SLA, not the primary control for app-id branch security. It would be relevant where Critical real-time voice flows use a high-loss internet link while a healthy low-jitter link is idle. Here the necessary evidence is Test allowed corporate SaaS and disallowed application traffic that share TCP 443. Case R152-C116; angle 2; post-pilot control gap; option considered: Degrade a test link and inspect path selection for voice versus bulk transfer applications.
C:This option addresses a different design objective: ION branch high availability, not the primary control for app-id branch security. It would be relevant where A single ION appliance at a distribution branch is the point of failure for voice and order processing. Here the necessary evidence is Test allowed corporate SaaS and disallowed application traffic that share TCP 443. Case R152-C116; angle 2; post-pilot control gap; option considered: Fail the active test ION and inspect active role election, forwarding continuity and route health.
D:This option addresses a different design objective: PAN-OS SD-WAN for existing NGFW, not the primary control for app-id branch security. It would be relevant where A remote office already owns PAN-OS firewalls and requires SD-WAN functionality without replacing its edge fleet. Here the necessary evidence is Test allowed corporate SaaS and disallowed application traffic that share TCP 443. Case R152-C116; angle 2; post-pilot control gap; option considered: Document the chosen hardware, software and management prerequisites and validate link failover in a pilot.
Question 463
Which design assumption should the architect REJECT when evaluating app-id branch security for EMEA public university? After EMEA public university completed a limited security transformation pilot, reviewers observed a control gap: A branch policy allows any traffic over TCP 443 because application identities are never distinguished. The case assumes the affected flows and dependencies have been traced and all unrelated systems are functioning; choose the narrow design repair before wider deployment.
- For EMEA public university: Test allowed corporate SaaS and disallowed application traffic that share TCP 443.
- For EMEA public university: Use the supported branch App-ID controls at the selected enforcement point and define permitted applications.
- For EMEA public university: Branch users gain app-specific access rather than unrestricted HTTPS permission.
- For EMEA public university: Define branch security exclusively by port and assume HTTPS equals the approved app.
Explanation
Correct Answer
D:Reject this assumption: Define branch security exclusively by port and assume HTTPS equals the approved app. It does not establish app-id branch security; the supported architecture is Use the supported branch App-ID controls at the selected enforcement point and define permitted applications. Verify it by: Test allowed corporate SaaS and disallowed application traffic that share TCP 443. Case R152-C116; angle 3; post-pilot control gap; option considered: Define branch security exclusively by port and assume HTTPS equals the approved app.
Incorrect Answers
A:This is a valid design/control/evidence statement in the specified case, not the assumption to reject. Test allowed corporate SaaS and disallowed application traffic that share TCP 443. It is consistent with the required outcome: Branch users gain app-specific access rather than unrestricted HTTPS permission. Case R152-C116; angle 3; post-pilot control gap; option considered: Test allowed corporate SaaS and disallowed application traffic that share TCP 443.
B:This is a valid design/control/evidence statement in the specified case, not the assumption to reject. Use the supported branch App-ID controls at the selected enforcement point and define permitted applications. It is consistent with the required outcome: Branch users gain app-specific access rather than unrestricted HTTPS permission. Case R152-C116; angle 3; post-pilot control gap; option considered: Use the supported branch App-ID controls at the selected enforcement point and define permitted applications.
C:This is a valid design/control/evidence statement in the specified case, not the assumption to reject. Branch users gain app-specific access rather than unrestricted HTTPS permission. It is consistent with the required outcome: Branch users gain app-specific access rather than unrestricted HTTPS permission. Case R152-C116; angle 3; post-pilot control gap; option considered: Branch users gain app-specific access rather than unrestricted HTTPS permission.
Question 464
Which measurable end state best satisfies the stated app-id branch security requirement for EMEA public university? After EMEA public university completed a limited security transformation pilot, reviewers observed a control gap: A branch policy allows any traffic over TCP 443 because application identities are never distinguished. The case assumes the affected flows and dependencies have been traced and all unrelated systems are functioning; choose the narrow design repair before wider deployment.
- For EMEA public university: Third-party branches are subject to the intended Prisma Access security services with tested tunnel ownership.
- For EMEA public university: Latency-sensitive applications prefer paths meeting the chosen SLA while bulk traffic follows its own policy.
- For EMEA public university: The branch's mode matches the required active path steering rather than passive measurement only.
- For EMEA public university: Branch users gain app-specific access rather than unrestricted HTTPS permission.
Explanation
Correct Answer
D:The required end state is Branch users gain app-specific access rather than unrestricted HTTPS permission. The architect must deploy Use the supported branch App-ID controls at the selected enforcement point and define permitted applications. and validate using Test allowed corporate SaaS and disallowed application traffic that share TCP 443. Case R152-C116; angle 4; post-pilot control gap; option considered: Branch users gain app-specific access rather than unrestricted HTTPS permission.
Incorrect Answers
A:This option addresses a different design objective: Third-party SD-WAN branch on-ramp, not the primary control for app-id branch security. It would be relevant where An acquired business keeps a third-party SD-WAN edge but must use common cloud security controls. Here the necessary evidence is Test allowed corporate SaaS and disallowed application traffic that share TCP 443. Case R152-C116; angle 4; post-pilot control gap; option considered: Third-party branches are subject to the intended Prisma Access security services with tested tunnel ownership.
B:This option addresses a different design objective: Application-aware path SLA, not the primary control for app-id branch security. It would be relevant where Critical real-time voice flows use a high-loss internet link while a healthy low-jitter link is idle. Here the necessary evidence is Test allowed corporate SaaS and disallowed application traffic that share TCP 443. Case R152-C116; angle 4; post-pilot control gap; option considered: Latency-sensitive applications prefer paths meeting the chosen SLA while bulk traffic follows its own policy.
C:This option addresses a different design objective: Prisma SD-WAN analytics versus control, not the primary control for app-id branch security. It would be relevant where A branch ION is in Analytics mode and operators expect it to steer applications across two MPLS links. Here the necessary evidence is Test allowed corporate SaaS and disallowed application traffic that share TCP 443. Case R152-C116; angle 4; post-pilot control gap; option considered: The branch's mode matches the required active path steering rather than passive measurement only.
Question 465
For Multinational retail company, which is the most directly supported architectural control for device-id for branch printers? The security architecture board of Multinational retail company is preparing a new Modernizing Branches program. The stakeholders have given the following specific requirement: Short-lived branch printers obtain changing leases and inherit the same outbound access as employee laptops. No existing change is being reverted; select the most directly justified architecture for this stated requirement.
- For Multinational retail company: Design appropriate URL filtering, DNS security and threat profiles at the branch's actual enforcement point.
- For Multinational retail company: Define Prisma SD-WAN application path policies using measured loss, latency and jitter objectives.
- For Multinational retail company: Use device discovery and supported Device-ID enforcement to separate printer app needs from laptop privileges.
- For Multinational retail company: Compare a supported PAN-OS SD-WAN architecture and licensing with a separate Prisma SD-WAN ION deployment.
Explanation
Correct Answer
C:This directly addresses the recorded gap: Short-lived branch printers obtain changing leases and inherit the same outbound access as employee laptops. The architectural control is Use device discovery and supported Device-ID enforcement to separate printer app needs from laptop privileges. The decisive test is Renew the test printer lease and compare its allowed destinations with an employee workstation. The objective is Device class controls persist through IP changes while legitimate printing continues. Case R152-C117; angle 1; architecture design; option considered: Use device discovery and supported Device-ID enforcement to separate printer app needs from laptop privileges.
Incorrect Answers
A:Branch DNS and URL threat controls addresses a different architectural concern, such as when a branch security rollout allows DNS requests to malicious destinations and treats routing success as security success. It does not establish device-id for branch printers here. The decisive test is to renew the test printer lease and compare its allowed destinations with an employee workstation.
B:This option addresses a different design objective: Application-aware path SLA, not the primary control for device-id for branch printers. It would be relevant where Critical real-time voice flows use a high-loss internet link while a healthy low-jitter link is idle. Here the necessary evidence is Renew the test printer lease and compare its allowed destinations with an employee workstation. Case R152-C117; angle 1; architecture design; option considered: Define Prisma SD-WAN application path policies using measured loss, latency and jitter objectives.
D:This option addresses a different design objective: PAN-OS SD-WAN for existing NGFW, not the primary control for device-id for branch printers. It would be relevant where A remote office already owns PAN-OS firewalls and requires SD-WAN functionality without replacing its edge fleet. Here the necessary evidence is Renew the test printer lease and compare its allowed destinations with an employee workstation. Case R152-C117; angle 1; architecture design; option considered: Compare a supported PAN-OS SD-WAN architecture and licensing with a separate Prisma SD-WAN ION deployment.
Question 466
Which validation most directly demonstrates device-id for branch printers is correctly designed for Multinational retail company? The security architecture board of Multinational retail company is preparing a new Modernizing Branches program. The stakeholders have given the following specific requirement: Short-lived branch printers obtain changing leases and inherit the same outbound access as employee laptops. No existing change is being reverted; select the most directly justified architecture for this stated requirement.
- For Multinational retail company: Test allowed corporate SaaS and disallowed application traffic that share TCP 443.
- For Multinational retail company: Renew the test printer lease and compare its allowed destinations with an employee workstation.
- For Multinational retail company: Document the chosen hardware, software and management prerequisites and validate link failover in a pilot.
- For Multinational retail company: Bring up a test branch tunnel and verify selected SaaS and private flows traverse their intended inspection path.
Explanation
Correct Answer
B:This checks the relevant device-id for branch printers enforcement path rather than a distant symptom. Renew the test printer lease and compare its allowed destinations with an employee workstation. The expected evidence is Device class controls persist through IP changes while legitimate printing continues. Case R152-C117; angle 2; architecture design; option considered: Renew the test printer lease and compare its allowed destinations with an employee workstation.
Incorrect Answers
A:This option addresses a different design objective: App-ID branch security, not the primary control for device-id for branch printers. It would be relevant where A branch policy allows any traffic over TCP 443 because application identities are never distinguished. Here the necessary evidence is Renew the test printer lease and compare its allowed destinations with an employee workstation. Case R152-C117; angle 2; architecture design; option considered: Test allowed corporate SaaS and disallowed application traffic that share TCP 443.
C:This option addresses a different design objective: PAN-OS SD-WAN for existing NGFW, not the primary control for device-id for branch printers. It would be relevant where A remote office already owns PAN-OS firewalls and requires SD-WAN functionality without replacing its edge fleet. Here the necessary evidence is Renew the test printer lease and compare its allowed destinations with an employee workstation. Case R152-C117; angle 2; architecture design; option considered: Document the chosen hardware, software and management prerequisites and validate link failover in a pilot.
D:Remote networks into Prisma Access addresses a different architectural concern, such as when a new warehouse branch needs centralized cloud security but lacks a controlled site-to-service traffic on-ramp. It does not establish device-id for branch printers here. The decisive test is to renew the test printer lease and compare its allowed destinations with an employee workstation.
Question 467
Which design assumption should the architect REJECT when evaluating device-id for branch printers for Multinational retail company? The security architecture board of Multinational retail company is preparing a new Modernizing Branches program. The stakeholders have given the following specific requirement: Short-lived branch printers obtain changing leases and inherit the same outbound access as employee laptops. No existing change is being reverted; select the most directly justified architecture for this stated requirement.
- For Multinational retail company: Renew the test printer lease and compare its allowed destinations with an employee workstation.
- For Multinational retail company: Device class controls persist through IP changes while legitimate printing continues.
- For Multinational retail company: Place all printer and workstation traffic in a single indefinite allow-any rule.
- For Multinational retail company: Use device discovery and supported Device-ID enforcement to separate printer app needs from laptop privileges.
Explanation
Correct Answer
C:Reject this assumption: Place all printer and workstation traffic in a single indefinite allow-any rule. It does not establish device-id for branch printers; the supported architecture is Use device discovery and supported Device-ID enforcement to separate printer app needs from laptop privileges. Verify it by: Renew the test printer lease and compare its allowed destinations with an employee workstation. Case R152-C117; angle 3; architecture design; option considered: Place all printer and workstation traffic in a single indefinite allow-any rule.
Incorrect Answers
A:This is a valid design/control/evidence statement in the specified case, not the assumption to reject. Renew the test printer lease and compare its allowed destinations with an employee workstation. It is consistent with the required outcome: Device class controls persist through IP changes while legitimate printing continues. Case R152-C117; angle 3; architecture design; option considered: Renew the test printer lease and compare its allowed destinations with an employee workstation.
B:This is a valid design/control/evidence statement in the specified case, not the assumption to reject. Device class controls persist through IP changes while legitimate printing continues. It is consistent with the required outcome: Device class controls persist through IP changes while legitimate printing continues. Case R152-C117; angle 3; architecture design; option considered: Device class controls persist through IP changes while legitimate printing continues.
D:This is a valid design/control/evidence statement in the specified case, not the assumption to reject. Use device discovery and supported Device-ID enforcement to separate printer app needs from laptop privileges. It is consistent with the required outcome: Device class controls persist through IP changes while legitimate printing continues. Case R152-C117; angle 3; architecture design; option considered: Use device discovery and supported Device-ID enforcement to separate printer app needs from laptop privileges.
Question 468
Select TWO directly linked controls for Multinational retail company: the architectural remedy and its decisive validation. The security architecture board of Multinational retail company is preparing a new Modernizing Branches program. The stakeholders have given the following specific requirement: Short-lived branch printers obtain changing leases and inherit the same outbound access as employee laptops. No existing change is being reverted; select the most directly justified architecture for this stated requirement.
- For Multinational retail company: Measure branch-to-SaaS and branch-to-data-center flow paths before and after the pilot.
- For Multinational retail company: Place all printer and workstation traffic in a single indefinite allow-any rule.
- For Multinational retail company: Renew the test printer lease and compare its allowed destinations with an employee workstation.
- For Multinational retail company: Use device discovery and supported Device-ID enforcement to separate printer app needs from laptop privileges.
- For Multinational retail company: Plan a supported third-party edge IPsec remote-network on-ramp and explicit routing/failure ownership.
Explanation
Correct Answer
C:This checks the relevant device-id for branch printers enforcement path rather than a distant symptom. Renew the test printer lease and compare its allowed destinations with an employee workstation. The expected evidence is Device class controls persist through IP changes while legitimate printing continues. Case R152-C117; angle 4; architecture design; option considered: Renew the test printer lease and compare its allowed destinations with an employee workstation.
D:This directly addresses the recorded gap: Short-lived branch printers obtain changing leases and inherit the same outbound access as employee laptops. The architectural control is Use device discovery and supported Device-ID enforcement to separate printer app needs from laptop privileges. The decisive test is Renew the test printer lease and compare its allowed destinations with an employee workstation. The objective is Device class controls persist through IP changes while legitimate printing continues. Case R152-C117; angle 4; architecture design; option considered: Use device discovery and supported Device-ID enforcement to separate printer app needs from laptop privileges.
Incorrect Answers
A:Branch SaaS local-breakout tradeoff addresses a different architectural concern, such as when a regional SASE migration backhauls SaaS flows through a central headquarters and violates voice latency targets. It does not establish device-id for branch printers here. The decisive test is to renew the test printer lease and compare its allowed destinations with an employee workstation.
B:This is an unsafe or insufficient shortcut for device-id for branch printers: Place all printer and workstation traffic in a single indefinite allow-any rule. The scoped requirement instead calls for Use device discovery and supported Device-ID enforcement to separate printer app needs from laptop privileges. Case R152-C117; angle 4; architecture design; option considered: Place all printer and workstation traffic in a single indefinite allow-any rule.
E:This option addresses a different design objective: Third-party SD-WAN branch on-ramp, not the primary control for device-id for branch printers. It would be relevant where An acquired business keeps a third-party SD-WAN edge but must use common cloud security controls. Here the necessary evidence is Renew the test printer lease and compare its allowed destinations with an employee workstation. Case R152-C117; angle 4; architecture design; option considered: Plan a supported third-party edge IPsec remote-network on-ramp and explicit routing/failure ownership.
Question 469
For Regional energy provider, which is the most directly supported architectural control for device-id for branch printers? After Regional energy provider completed a limited security transformation pilot, reviewers observed a control gap: Short-lived branch printers obtain changing leases and inherit the same outbound access as employee laptops. The case assumes the affected flows and dependencies have been traced and all unrelated systems are functioning; choose the narrow design repair before wider deployment.
- For Regional energy provider: Use the supported branch App-ID controls at the selected enforcement point and define permitted applications.
- For Regional energy provider: Use device discovery and supported Device-ID enforcement to separate printer app needs from laptop privileges.
- For Regional energy provider: Compare a supported PAN-OS SD-WAN architecture and licensing with a separate Prisma SD-WAN ION deployment.
- For Regional energy provider: Plan a supported third-party edge IPsec remote-network on-ramp and explicit routing/failure ownership.
Explanation
Correct Answer
B:This directly addresses the recorded gap: Short-lived branch printers obtain changing leases and inherit the same outbound access as employee laptops. The architectural control is Use device discovery and supported Device-ID enforcement to separate printer app needs from laptop privileges. The decisive test is Renew the test printer lease and compare its allowed destinations with an employee workstation. The objective is Device class controls persist through IP changes while legitimate printing continues. Case R152-C118; angle 1; post-pilot control gap; option considered: Use device discovery and supported Device-ID enforcement to separate printer app needs from laptop privileges.
Incorrect Answers
A:This option addresses a different design objective: App-ID branch security, not the primary control for device-id for branch printers. It would be relevant where A branch policy allows any traffic over TCP 443 because application identities are never distinguished. Here the necessary evidence is Renew the test printer lease and compare its allowed destinations with an employee workstation. Case R152-C118; angle 1; post-pilot control gap; option considered: Use the supported branch App-ID controls at the selected enforcement point and define permitted applications.
C:This option addresses a different design objective: PAN-OS SD-WAN for existing NGFW, not the primary control for device-id for branch printers. It would be relevant where A remote office already owns PAN-OS firewalls and requires SD-WAN functionality without replacing its edge fleet. Here the necessary evidence is Renew the test printer lease and compare its allowed destinations with an employee workstation. Case R152-C118; angle 1; post-pilot control gap; option considered: Compare a supported PAN-OS SD-WAN architecture and licensing with a separate Prisma SD-WAN ION deployment.
D:This option addresses a different design objective: Third-party SD-WAN branch on-ramp, not the primary control for device-id for branch printers. It would be relevant where An acquired business keeps a third-party SD-WAN edge but must use common cloud security controls. Here the necessary evidence is Renew the test printer lease and compare its allowed destinations with an employee workstation. Case R152-C118; angle 1; post-pilot control gap; option considered: Plan a supported third-party edge IPsec remote-network on-ramp and explicit routing/failure ownership.
Question 470
Which validation most directly demonstrates device-id for branch printers is correctly designed for Regional energy provider? After Regional energy provider completed a limited security transformation pilot, reviewers observed a control gap: Short-lived branch printers obtain changing leases and inherit the same outbound access as employee laptops. The case assumes the affected flows and dependencies have been traced and all unrelated systems are functioning; choose the narrow design repair before wider deployment.
- For Regional energy provider: Verify a test third-party tunnel, permitted app traffic and branch-failure behavior against the handoff.
- For Regional energy provider: Degrade a test link and inspect path selection for voice versus bulk transfer applications.
- For Regional energy provider: Document the chosen hardware, software and management prerequisites and validate link failover in a pilot.
- For Regional energy provider: Renew the test printer lease and compare its allowed destinations with an employee workstation.
Explanation
Correct Answer
D:This checks the relevant device-id for branch printers enforcement path rather than a distant symptom. Renew the test printer lease and compare its allowed destinations with an employee workstation. The expected evidence is Device class controls persist through IP changes while legitimate printing continues. Case R152-C118; angle 2; post-pilot control gap; option considered: Renew the test printer lease and compare its allowed destinations with an employee workstation.
Incorrect Answers
A:This option addresses a different design objective: Third-party SD-WAN branch on-ramp, not the primary control for device-id for branch printers. It would be relevant where An acquired business keeps a third-party SD-WAN edge but must use common cloud security controls. Here the necessary evidence is Renew the test printer lease and compare its allowed destinations with an employee workstation. Case R152-C118; angle 2; post-pilot control gap; option considered: Verify a test third-party tunnel, permitted app traffic and branch-failure behavior against the handoff.
B:This option addresses a different design objective: Application-aware path SLA, not the primary control for device-id for branch printers. It would be relevant where Critical real-time voice flows use a high-loss internet link while a healthy low-jitter link is idle. Here the necessary evidence is Renew the test printer lease and compare its allowed destinations with an employee workstation. Case R152-C118; angle 2; post-pilot control gap; option considered: Degrade a test link and inspect path selection for voice versus bulk transfer applications.
C:This option addresses a different design objective: PAN-OS SD-WAN for existing NGFW, not the primary control for device-id for branch printers. It would be relevant where A remote office already owns PAN-OS firewalls and requires SD-WAN functionality without replacing its edge fleet. Here the necessary evidence is Renew the test printer lease and compare its allowed destinations with an employee workstation. Case R152-C118; angle 2; post-pilot control gap; option considered: Document the chosen hardware, software and management prerequisites and validate link failover in a pilot.
Palo Alto Networks Network Security Architect (NetSec-Architect) Practice Tests