Palo Alto Networks NGFW-Engineer Exam Dumps, Practice Test Questions

100% Latest & Updated Palo Alto Networks NGFW-Engineer Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!

Palo Alto Networks NGFW-Engineer  Premium File
$54.99
$49.99

NGFW-Engineer Premium File

  • Premium File: 143 Questions & Answers. Last update: Nov 9, 2026
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates

NGFW-Engineer Premium File

Palo Alto Networks NGFW-Engineer  Premium File
  • Premium File: 143 Questions & Answers. Last update: Nov 9, 2026
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates
$54.99
$49.99

Palo Alto Networks NGFW-Engineer Practice Test 2

Question 10

A temporary manufacturing site needs inline Layer 2 filtering but must retain its existing IP addressing. After the change, which observation would most directly prove the intended behavior?

  1. Check traffic source and destination zones in matched rules for an approved clinical application
  2. Compare client ARP and end-to-end reachability before and after inline insertion
  3. Inspect Traffic logs for matching zone pair and selected permit rule
  4. Compare member operational state against the configured expected LACP bundle

Explanation

Correct Answer

B:

Preserved addressing and successful permitted traffic distinguish transparent Layer 2 insertion from a routing change.

Incorrect Answers

A:

Check traffic source and destination zones in matched rules for an approved clinical application. Effective zone classification demonstrates the intended segmentation. That observation would not by itself verify this particular change. The relevant evidence here is “Compare client ARP and end-to-end reachability before and after inline insertion”.

C:

Inspect Traffic logs for matching zone pair and selected permit rule. The log reveals whether zone policy or routing prevents the connection. The relevant evidence here is “Compare client ARP and end-to-end reachability before and after inline insertion”.

D:

Compare member operational state against the configured expected LACP bundle. This distinguishes normal reduced capacity from an unjoined member. Its effect is distinct from the intended configuration outcome here.

Question 11

A temporary manufacturing site needs inline Layer 2 filtering but must retain its existing IP addressing. During validation, the following problem is reported: The cutover changes how frames are forwarded and can strand the original host subnet. Which defect or mistaken assumption most directly accounts for this result?

  1. Leaving one endpoint configured with the old /30 prefix
  2. Assigning both segments to one broad zone while relying on default interzone deny
  3. Changing a switch-facing firewall port to Layer 3 without configuring the required gateway design
  4. Relying only on a default route that exits through the other uplink

Explanation

Correct Answer

C:

Changing a switch-facing firewall port to Layer 3 without configuring the required gateway design. The cutover changes how frames are forwarded and can strand the original host subnet.

Incorrect Answers

A:

The resulting address assumptions may prevent peer adjacency or correct next-hop selection. This action would leave the decisive condition in the case unchanged.

B:

Assigning both segments to one broad zone while relying on default interzone deny. Interzone default does not apply when both endpoints share the same zone. The issue evaluated here is “Changing a switch-facing firewall port to Layer 3 without configuring the required gateway design”.

D:

Relying only on a default route that exits through the other uplink. The wrong egress path can defeat the application's reachability requirement. It addresses a different part of the firewall deployment, not the failure described. The issue evaluated here is “Changing a switch-facing firewall port to Layer 3 without configuring the required gateway design”.

Question 12

A temporary manufacturing site needs inline Layer 2 filtering but must retain its existing IP addressing. Before releasing the change, which safeguard most directly reduces the associated operational or security risk?

  1. Set the service to application-default where appropriate and apply required threat profiles
  2. Avoid enabling administrative services on untrusted internet-facing interfaces
  3. Back up the switch trunk and rollback settings before inserting the inline pair
  4. Plan renewal and revocation checks before making certificates mandatory

Explanation

Correct Answer

C:

Back up the switch trunk and rollback settings before inserting the inline pair. Known recovery settings reduce downtime if MAC learning or VLAN handling fails.

Incorrect Answers

A:

Set the service to application-default where appropriate and apply required threat profiles. Least privilege limits which permitted application traffic can pass. That protection is useful, but it does not control the risk introduced by this change. The relevant safeguard here is “Back up the switch trunk and rollback settings before inserting the inline pair”.

B:

Avoid enabling administrative services on untrusted internet-facing interfaces. Administrative reachability should not grow as a side effect of routing changes. Its effect is distinct from the intended configuration outcome here. The relevant safeguard here is “Back up the switch trunk and rollback settings before inserting the inline pair”.

D:

Plan renewal and revocation checks before making certificates mandatory. An expired or compromised issuing chain can interrupt or weaken remote access. That feature does not establish the specific result needed in this situation. The relevant safeguard here is “Back up the switch trunk and rollback settings before inserting the inline pair”.

Question 13

A Layer 2 appliance is deployed for east-west traffic inspection and one existing VLAN is being silently dropped. What is the most appropriate next engineering action for this situation?

  1. Verify that both Layer 2 interfaces belong to the intended VLAN forwarding domain
  2. Set the Layer 3 interface prefix and peer addressing to the actual supported /31 design
  3. Create separate tagged Layer 3 subinterfaces with independent IP and zone associations
  4. Inspect the Aggregate Ethernet member and LACP state on both peers

Explanation

Correct Answer

A:

Layer 2 interface membership determines whether tagged frames can pass the expected segment.

Incorrect Answers

B:

A /31 point-to-point link has two endpoint addresses and depends on matching configuration on both sides. The mismatch would persist because this choice targets another control point. This case instead requires “Verify that both Layer 2 interfaces belong to the intended VLAN forwarding domain”.

C:

A Layer 3 subinterface terminates the selected VLAN and provides its own routed interface identity. That feature does not establish the specific result needed in this situation.

D:

Inspect the Aggregate Ethernet member and LACP state on both peers. Per-member state identifies degraded redundancy even if the logical aggregate stays up. This case instead requires “Verify that both Layer 2 interfaces belong to the intended VLAN forwarding domain”.

Question 14

A Layer 2 appliance is deployed for east-west traffic inspection and one existing VLAN is being silently dropped. After the change, which observation would most directly prove the intended behavior?

  1. Inspect a test denied path between two high-risk VLANs and the matching deny reason
  2. Compare the connected route and ARP neighbor entries for the expected LAN
  3. Use a fresh session log to identify the matched interzone policy decision
  4. Inspect the ingress tag and egress forwarding result for the affected VLAN

Explanation

Correct Answer

D:

Inspect the ingress tag and egress forwarding result for the affected VLAN. A packet capture can isolate a VLAN membership failure from a security-policy denial.

Incorrect Answers

A:

Inspect a test denied path between two high-risk VLANs and the matching deny reason. A negative test proves that shared corporate ownership has not erased segmentation. That observation would not by itself verify this particular change. The relevant evidence here is “Inspect the ingress tag and egress forwarding result for the affected VLAN”.

B:

Compare the connected route and ARP neighbor entries for the expected LAN. These distinguish addressing or adjacency faults from an application-layer problem. The relevant evidence here is “Inspect the ingress tag and egress forwarding result for the affected VLAN”.

C:

Use a fresh session log to identify the matched interzone policy decision. The session log isolates zone-policy denial from IPsec negotiation. This does not show that the specified firewall path works as intended. The relevant evidence here is “Inspect the ingress tag and egress forwarding result for the affected VLAN”.

Question 15

A Layer 2 appliance is deployed for east-west traffic inspection and one existing VLAN is being silently dropped. During validation, the following problem is reported: No authorized rule can compensate for missing Layer 2 connectivity. Which defect or mistaken assumption most directly accounts for this result?

  1. Treating separate IP subnet numbers as proof the firewall sees two different security zones
  2. Updating only the zone's friendly label without correcting Security rule source-zone criteria
  3. Placing the vendor tunnel interface in the unrestricted trusted zone
  4. Leaving the affected VLAN unassociated with the egress Layer 2 interface

Explanation

Correct Answer

D:

Leaving the affected VLAN unassociated with the egress Layer 2 interface. No authorized rule can compensate for missing Layer 2 connectivity.

Incorrect Answers

A:

Treating separate IP subnet numbers as proof the firewall sees two different security zones. Zones are configured on interfaces, not inferred from subnet numbering. This action would leave the decisive condition in the case unchanged. The issue evaluated here is “Leaving the affected VLAN unassociated with the egress Layer 2 interface”.

B:

Updating only the zone's friendly label without correcting Security rule source-zone criteria. The packet may reach the interzone default deny instead. It addresses a different part of the firewall deployment, not the failure described. The issue evaluated here is “Leaving the affected VLAN unassociated with the egress Layer 2 interface”.

C:

Placing the vendor tunnel interface in the unrestricted trusted zone. Vendor sessions may inherit broad trusted-network permissions. The observed failure here would remain unresolved by that step. The issue evaluated here is “Leaving the affected VLAN unassociated with the egress Layer 2 interface”.

Question 16

A Layer 2 appliance is deployed for east-west traffic inspection and one existing VLAN is being silently dropped. Before releasing the change, which safeguard most directly reduces the associated operational or security risk?

  1. Test a representative frame in each allowed VLAN before promoting the change
  2. Add members one at a time and ensure the surviving links carry production traffic
  3. Test DNS behavior for both internal and public names under the new client configuration
  4. Use explicit change review for reusable profiles used by multiple routing contexts

Explanation

Correct Answer

A:

Test a representative frame in each allowed VLAN before promoting the change. This catches segmentation errors that a single untagged ping would miss.

Incorrect Answers

B:

Add members one at a time and ensure the surviving links carry production traffic. An additive change should not cause a simultaneous loss of the entire uplink. That protection is useful, but it does not control the risk introduced by this change.

C:

Test DNS behavior for both internal and public names under the new client configuration. Split-tunnel DNS changes must not break ordinary browsing. Its effect is distinct from the intended configuration outcome here. The relevant safeguard here is “Test a representative frame in each allowed VLAN before promoting the change”.

D:

Use explicit change review for reusable profiles used by multiple routing contexts. One profile update can alter many neighbors at once. That feature does not establish the specific result needed in this situation. The relevant safeguard here is “Test a representative frame in each allowed VLAN before promoting the change”.

Question 17

An enterprise branch needs the firewall to route between a staff subnet and a secured application subnet. What is the most appropriate next engineering action for this situation?

  1. Inspect BGP import filtering and route-selection outcomes for the specific prefix
  2. Place the patient servers and workstations in distinct security zones and write narrowly scoped interzone rules
  3. Use separate security zones for distinct trust boundaries rather than equating ownership with risk
  4. Assign IP addresses to Layer 3 interfaces and place them in an appropriate virtual or logical router

Explanation

Correct Answer

D:

Assign IP addresses to Layer 3 interfaces and place them in an appropriate virtual or logical router. Layer 3 forwarding requires interfaces with IP configuration and routing context.

Incorrect Answers

A:

Inspect BGP import filtering and route-selection outcomes for the specific prefix. A live session can still reject a route under configured policy. The case depends on a different setting or test to meet its requirement. This case instead requires “Assign IP addresses to Layer 3 interfaces and place them in an appropriate virtual or logical router”.

B:

Place the patient servers and workstations in distinct security zones and write narrowly scoped interzone rules. Zones provide the security boundary for policy between traffic segments. This case instead requires “Assign IP addresses to Layer 3 interfaces and place them in an appropriate virtual or logical router”.

C:

Use separate security zones for distinct trust boundaries rather than equating ownership with risk. Zone separation enables explicit controls for different asset populations. Its effect is distinct from the intended configuration outcome here.

Question 18

An enterprise branch needs the firewall to route between a staff subnet and a secured application subnet. After the change, which observation would most directly prove the intended behavior?

  1. Check MAC learning and permitted traffic across the intended Layer 2 VLAN
  2. Use policy match and Traffic logs for a new session after the move
  3. Inspect the installed route to the destination and observe its egress Layer 3 interface
  4. Inspect OSPF neighbor state and the installed learned route to the target network

Explanation

Correct Answer

C:

Inspect the installed route to the destination and observe its egress Layer 3 interface. The forwarding decision demonstrates which routed interface the traffic can use.

Incorrect Answers

A:

Forwarding between the bridged ports proves the VLAN path is present without an unintended routing hop. That feature does not establish the specific result needed in this situation.

B:

Use policy match and Traffic logs for a new session after the move. Actual rule selection confirms the migration is functional. This does not show that the specified firewall path works as intended. The relevant evidence here is “Inspect the installed route to the destination and observe its egress Layer 3 interface”.

D:

Inspect OSPF neighbor state and the installed learned route to the target network. Full adjacency plus a usable route proves both control-plane and forwarding progress. The relevant evidence here is “Inspect the installed route to the destination and observe its egress Layer 3 interface”.

Question 19

An enterprise branch needs the firewall to route between a staff subnet and a secured application subnet. During validation, the following problem is reported: The firewall cannot select that interface for the subnet's route lookup. Which defect or mistaken assumption most directly accounts for this result?

  1. Omitting the destination interface from the relevant routing instance
  2. Assigning the tagged subinterface to the adjacent tenant's security zone
  3. Placing the vendor tunnel interface in the unrestricted trusted zone
  4. Import policy silently denying the exact prefix that the application requires

Explanation

Correct Answer

A:

Omitting the destination interface from the relevant routing instance. The firewall cannot select that interface for the subnet's route lookup.

Incorrect Answers

B:

Assigning the tagged subinterface to the adjacent tenant's security zone. The source zone becomes wrong even if its IP address and route are correct. It addresses a different part of the firewall deployment, not the failure described.

C:

Placing the vendor tunnel interface in the unrestricted trusted zone. Vendor sessions may inherit broad trusted-network permissions. The mismatch would persist because this choice targets another control point.

D:

Import policy silently denying the exact prefix that the application requires. The remote network is never installed despite healthy BGP peering. The observed failure here would remain unresolved by that step.

Question 20

An enterprise branch needs the firewall to route between a staff subnet and a secured application subnet. Which TWO measures together provide a direct verification and a safe deployment control? Choose TWO.

  1. Check MAC learning and permitted traffic across the intended Layer 2 VLAN
  2. Define separate security zones and narrowly scoped interzone access for the subnets
  3. Limit vendor tunnel zone access to named applications and destinations
  4. Inspect the installed route to the destination and observe its egress Layer 3 interface
  5. Apply an explicit security policy between the local zone and tunnel zone

Explanation

Correct Answers

B:

Define separate security zones and narrowly scoped interzone access for the subnets. Routing reachability alone should not permit every application between segments.

D:

Inspect the installed route to the destination and observe its egress Layer 3 interface. The forwarding decision demonstrates which routed interface the traffic can use.

Incorrect Answers

A:

Forwarding between the bridged ports proves the VLAN path is present without an unintended routing hop. This case instead requires “Define separate security zones and narrowly scoped interzone access for the subnets | Inspect the installed route to the destination and observe its egress Layer 3 interface”.

C:

Limit vendor tunnel zone access to named applications and destinations. Route reachability to internal prefixes is broader than the authorized service need. That feature does not establish the specific result needed in this situation. This case instead requires “Define separate security zones and narrowly scoped interzone access for the subnets | Inspect the installed route to the destination and observe its egress Layer 3 interface”.

E:

Apply an explicit security policy between the local zone and tunnel zone. A healthy tunnel should not open unreviewed access to every remote subnet. Its effect is distinct from the intended configuration outcome here. This case instead requires “Define separate security zones and narrowly scoped interzone access for the subnets | Inspect the installed route to the destination and observe its egress Layer 3 interface”.

Palo Alto Networks Certified Next-Generation Firewall Engineer (NGFW-Engineer) Practice Tests

UP

SPECIAL OFFER: GET 10% OFF

This is ONE TIME OFFER

ExamSnap Discount Offer
Enter Your Email Address to Receive Your 10% Off Discount Code

A confirmation link will be sent to this email address to verify your login. *We value your privacy. We will not rent or sell your email address.

Download Free Demo of VCE Exam Simulator

Experience Avanset VCE Exam Simulator for yourself.

Simply submit your e-mail address below to get started with our interactive software demo of your free trial.

Free Demo Limits: In the demo version you will be able to access only first 5 questions from exam.