100% Latest & Updated Palo Alto Networks NGFW-Engineer Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!
Question 210
A firewall migrating to the Advanced Routing Engine must continue exporting an approved OSPF-learned subnet. After the change, which observation would most directly prove the intended behavior?
- Fail the monitored path and verify the default route leaves the effective forwarding table
- Inspect selected best path and actual egress forwarding for the destination prefix
- Use an actual forwarding lookup and probe monitor state for the failed destination
- Confirm that only the approved subnet is redistributed after migration
Explanation
Correct Answer
D:Confirm that only the approved subnet is redistributed after migration. Forwarding and advertisement evidence are more reliable than similar-looking UI settings.
Incorrect Answers
A:Fail the monitored path and verify the default route leaves the effective forwarding table. A probe alarm without route withdrawal is insufficient for failover. The relevant evidence here is “Confirm that only the approved subnet is redistributed after migration”.
B:Inspect selected best path and actual egress forwarding for the destination prefix. This proves that policy affects the installed path, not merely the peer session. Its effect is distinct from the intended configuration outcome here. The relevant evidence here is “Confirm that only the approved subnet is redistributed after migration”.
C:Use an actual forwarding lookup and probe monitor state for the failed destination. These show whether route selection follows valid health information. That observation would not by itself verify this particular change. The relevant evidence here is “Confirm that only the approved subnet is redistributed after migration”.
Question 211
A firewall migrating to the Advanced Routing Engine must continue exporting an approved OSPF-learned subnet. During validation, the following problem is reported: That condition is not equivalent in the advanced routing engine. Which defect or mistaken assumption most directly accounts for this result?
- Monitoring only the local next-hop ARP reachability despite upstream internet loss
- Copying a legacy OSPF redistribution filter that uses an unsupported origin-area criterion
- Import policy silently denying the exact prefix that the application requires
- Giving both routes an unexpected equal preference with no failure monitoring
Explanation
Correct Answer
B:Copying a legacy OSPF redistribution filter that uses an unsupported origin-area criterion. That condition is not equivalent in the advanced routing engine.
Incorrect Answers
A:Monitoring only the local next-hop ARP reachability despite upstream internet loss. The route can remain installed through a useless path. It addresses a different part of the firewall deployment, not the failure described. The issue evaluated here is “Copying a legacy OSPF redistribution filter that uses an unsupported origin-area criterion”.
C:Import policy silently denying the exact prefix that the application requires. The remote network is never installed despite healthy BGP peering. The issue evaluated here is “Copying a legacy OSPF redistribution filter that uses an unsupported origin-area criterion”.
D:Giving both routes an unexpected equal preference with no failure monitoring. Traffic selection may not match the intended primary-backup design. This action would leave the decisive condition in the case unchanged. The issue evaluated here is “Copying a legacy OSPF redistribution filter that uses an unsupported origin-area criterion”.
Question 212
A firewall migrating to the Advanced Routing Engine must continue exporting an approved OSPF-learned subnet. Before releasing the change, which safeguard most directly reduces the associated operational or security risk?
- Keep a before-and-after export inventory during the routing-engine migration
- Set and test a recovery hold-down policy suitable for the site
- Use a stable representative monitor target and a tested secondary route
- Keep a documented supported fallback that does not silently disable required controls
Explanation
Correct Answer
A:Keep a before-and-after export inventory during the routing-engine migration. The comparison catches new advertisements and missing critical routes.
Incorrect Answers
B:Set and test a recovery hold-down policy suitable for the site. Rapidly changing link states should not cause repeated HA role oscillation. Its effect is distinct from the intended configuration outcome here. The relevant safeguard here is “Keep a before-and-after export inventory during the routing-engine migration”.
C:Use a stable representative monitor target and a tested secondary route. Bad targets or thresholds can blackhole traffic or oscillate routing. That protection is useful, but it does not control the risk introduced by this change. The relevant safeguard here is “Keep a before-and-after export inventory during the routing-engine migration”.
D:Keep a documented supported fallback that does not silently disable required controls. Interoperability recovery should remain visible to the security owner. That feature does not establish the specific result needed in this situation. The relevant safeguard here is “Keep a before-and-after export inventory during the routing-engine migration”.
Question 213
A default WAN static route must be withdrawn when the next-hop router stays up but its external service fails. What is the most appropriate next engineering action for this situation?
- Tighten export filtering using explicit prefix lists or route maps
- Configure the appropriate BGP local AS, peer AS, transport, and import policy
- Configure a supported static-route path monitor to withdraw the route upon probe failure
- Use HA path monitoring against a suitable reachable target rather than link-only monitoring
Explanation
Correct Answer
C:Path monitoring can remove a stale static route when the downstream destination is unreachable.
Incorrect Answers
A:Tighten export filtering using explicit prefix lists or route maps. Export policy determines which routes are advertised to peers. This case instead requires “Configure a supported static-route path monitor to withdraw the route upon probe failure”.
B:Configure the appropriate BGP local AS, peer AS, transport, and import policy. BGP exchanges prefixes with explicitly defined peers under routing policy. Its effect is distinct from the intended configuration outcome here.
D:Use HA path monitoring against a suitable reachable target rather than link-only monitoring. Path monitoring detects lost end-to-end reachability beyond the local Ethernet carrier. The case depends on a different setting or test to meet its requirement.
Question 214
A default WAN static route must be withdrawn when the next-hop router stays up but its external service fails. After the change, which observation would most directly prove the intended behavior?
- Compare probe-loss events with actual application reachability before changing thresholds
- Inspect selected best path and actual egress forwarding for the destination prefix
- Check path-monitor target status and the configured failover condition
- Fail the monitored path and verify the default route leaves the effective forwarding table
Explanation
Correct Answer
D:Fail the monitored path and verify the default route leaves the effective forwarding table. A probe alarm without route withdrawal is insufficient for failover.
Incorrect Answers
A:Compare probe-loss events with actual application reachability before changing thresholds. Correlation distinguishes false positives from genuine route failures. That observation would not by itself verify this particular change.
B:Inspect selected best path and actual egress forwarding for the destination prefix. This proves that policy affects the installed path, not merely the peer session. This does not show that the specified firewall path works as intended.
C:Check path-monitor target status and the configured failover condition. The test proves the firewall distinguishes remote path failure from local link state. The relevant evidence here is “Fail the monitored path and verify the default route leaves the effective forwarding table”.
Question 215
A default WAN static route must be withdrawn when the next-hop router stays up but its external service fails. During validation, the following problem is reported: The route can remain installed through a useless path. Which defect or mistaken assumption most directly accounts for this result?
- Applying a policy to the wrong routing instance or peer group
- Monitoring only the local next-hop ARP reachability despite upstream internet loss
- Copying a legacy OSPF redistribution filter that uses an unsupported origin-area criterion
- Using an unstable single remote probe as the sole failover authority
Explanation
Correct Answer
B:Monitoring only the local next-hop ARP reachability despite upstream internet loss. The route can remain installed through a useless path.
Incorrect Answers
A:Applying a policy to the wrong routing instance or peer group. The intended prefix's best-path decision remains unchanged. The observed failure here would remain unresolved by that step. The issue evaluated here is “Monitoring only the local next-hop ARP reachability despite upstream internet loss”.
C:Copying a legacy OSPF redistribution filter that uses an unsupported origin-area criterion. That condition is not equivalent in the advanced routing engine. It addresses a different part of the firewall deployment, not the failure described.
D:Using an unstable single remote probe as the sole failover authority. Packet loss at that endpoint may trigger needless role changes. This action would leave the decisive condition in the case unchanged.
Question 216
A default WAN static route must be withdrawn when the next-hop router stays up but its external service fails. Before releasing the change, which safeguard most directly reduces the associated operational or security risk?
- Plan redundant HA control and data paths appropriate to the deployment
- Test the revised monitoring sensitivity against actual link and path outages
- Test DNS behavior for both internal and public names under the new client configuration
- Use a stable representative monitor target and a tested secondary route
Explanation
Correct Answer
D:Use a stable representative monitor target and a tested secondary route. Bad targets or thresholds can blackhole traffic or oscillate routing.
Incorrect Answers
A:Plan redundant HA control and data paths appropriate to the deployment. A single HA cable failure must not defeat the desired resilience. Its effect is distinct from the intended configuration outcome here.
B:Test the revised monitoring sensitivity against actual link and path outages. Reducing false alarms must not hide meaningful failures. That protection is useful, but it does not control the risk introduced by this change.
C:Test DNS behavior for both internal and public names under the new client configuration. Split-tunnel DNS changes must not break ordinary browsing. That feature does not establish the specific result needed in this situation. The relevant safeguard here is “Use a stable representative monitor target and a tested secondary route”.
Question 217
Two static routes provide primary and backup paths to a partner network. What is the most appropriate next engineering action for this situation?
- Use HA path monitoring against a suitable reachable target rather than link-only monitoring
- Configure the appropriate BGP local AS, peer AS, transport, and import policy
- Set suitable metrics and monitor the primary path so the backup becomes eligible after failure
- Use a redistribution profile or route-map that matches only the approved prefix
Explanation
Correct Answer
C:Set suitable metrics and monitor the primary path so the backup becomes eligible after failure. Preference and path health together determine which route forwards.
Incorrect Answers
A:Use HA path monitoring against a suitable reachable target rather than link-only monitoring. Path monitoring detects lost end-to-end reachability beyond the local Ethernet carrier. This case instead requires “Set suitable metrics and monitor the primary path so the backup becomes eligible after failure”.
B:Configure the appropriate BGP local AS, peer AS, transport, and import policy. BGP exchanges prefixes with explicitly defined peers under routing policy. That feature does not establish the specific result needed in this situation.
D:Use a redistribution profile or route-map that matches only the approved prefix. Selective redistribution introduces precisely the required route into another protocol. This action would leave the decisive condition in the case unchanged. This case instead requires “Set suitable metrics and monitor the primary path so the backup becomes eligible after failure”.
Question 218
Two static routes provide primary and backup paths to a partner network. After the change, which observation would most directly prove the intended behavior?
- Inspect the neighbor's received route and its origin or tags against the approved list
- Observe the route table before, during, and after a primary-path outage
- Check BGP peer established state and accepted prefixes in the effective routing table
- Compare advertised routes before and after the narrowed policy
Explanation
Correct Answer
B:Observe the route table before, during, and after a primary-path outage. The effective next hop should switch and later recover as designed.
Incorrect Answers
A:Inspect the neighbor's received route and its origin or tags against the approved list. The receiving side should learn the intended prefix and nothing broader. That feature does not establish the specific result needed in this situation.
C:Check BGP peer established state and accepted prefixes in the effective routing table. Established peering alone does not prove intended routes were installed. The relevant evidence here is “Observe the route table before, during, and after a primary-path outage”.
D:Compare advertised routes before and after the narrowed policy. A remote peer's accepted route set shows whether leakage stopped. This does not show that the specified firewall path works as intended. The relevant evidence here is “Observe the route table before, during, and after a primary-path outage”.
Question 219
Two static routes provide primary and backup paths to a partner network. During validation, the following problem is reported: Traffic selection may not match the intended primary-backup design. Which defect or mistaken assumption most directly accounts for this result?
- Monitoring a different management interface while ignoring the actual production uplink
- Reversing the expected external peer AS number in the BGP configuration
- Relying on import policy to prevent routes being sent outbound
- Giving both routes an unexpected equal preference with no failure monitoring
Explanation
Correct Answer
D:Giving both routes an unexpected equal preference with no failure monitoring. Traffic selection may not match the intended primary-backup design.
Incorrect Answers
A:Monitoring a different management interface while ignoring the actual production uplink. The critical data-plane failure never satisfies the failover trigger. The observed failure here would remain unresolved by that step.
B:Reversing the expected external peer AS number in the BGP configuration. The session may fail to establish with the authorized router. It addresses a different part of the firewall deployment, not the failure described. The issue evaluated here is “Giving both routes an unexpected equal preference with no failure monitoring”.
C:Relying on import policy to prevent routes being sent outbound. Inbound filtering does not control exported advertisements. The mismatch would persist because this choice targets another control point.
Question 220
Two static routes provide primary and backup paths to a partner network. Which TWO measures together provide a direct verification and a safe deployment control? Choose TWO.
- Schedule the zone reassignment with its dependent policy edits as one change set
- Document primary and alternate route behavior before modifying BGP preferences
- Inspect the neighbor's received route and its origin or tags against the approved list
- Observe the route table before, during, and after a primary-path outage
- Test application reply paths after each route transition
Explanation
Correct Answers
D:Observe the route table before, during, and after a primary-path outage. The effective next hop should switch and later recover as designed.
E:An apparently healthy outbound failover can still fail because the partner lacks a return route.
Incorrect Answers
A:Schedule the zone reassignment with its dependent policy edits as one change set. A partially applied change could cause an outage. Its effect is distinct from the intended configuration outcome here.
B:Document primary and alternate route behavior before modifying BGP preferences. An unintended best path can reroute business traffic through a costly or insecure link. That feature does not establish the specific result needed in this situation. This case instead requires “Observe the route table before, during, and after a primary-path outage | Test application reply paths after each route transition”.
C:Inspect the neighbor's received route and its origin or tags against the approved list. The receiving side should learn the intended prefix and nothing broader. This case instead requires “Observe the route table before, during, and after a primary-path outage | Test application reply paths after each route transition”.
Palo Alto Networks Certified Next-Generation Firewall Engineer (NGFW-Engineer) Practice Tests