100% Latest & Updated Cisco 350-901 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!
Question 600
The generated payload contains a field supported by the model but not the target device release. Independently, reviewers flag this potentially unsafe practice for assessment: 'Mark every compiled payload deployed before sending it'. Which verification addresses that practice without assuming it caused the incident?
- Inspect API response and operational state
- Inspect validation errors
- Compile only against a newer lab schema for all devices
- Review source-of-truth versus output model
Explanation
Correct Answer
A:Generation is not delivery. The intended behavior is: Device acceptance and intended operation must agree.
Incorrect Answers
B:This checks validate node constraints, not the named failure. Schema constraints exist beyond JSON syntax.
C:Older devices may reject unsupported nodes.
D:This checks separate intent from encoding, not the named failure. Clear separation supports multiple device families.
Question 601
An enterprise replaces five-minute CLI polling with model-driven telemetry from IOS XE switches. The specific implementation objective is to identify modeled sensor path. Which configuration best meets the stated requirement?
- Select a supported YANG-modeled operational path for desired interface metrics
- Enable a device knob without provisioning any collector endpoint
- Assume every counter will emit on-change updates at a fixed interval
- Mark telemetry healthy merely because the collector process is running
Explanation
Correct Answer
A:Model path defines what data is emitted.
Incorrect Answers
B:No consumer means no useful telemetry pipeline.
C:Counter streaming behavior depends on subscription mode.
D:A running process may receive no valid measurements.
Question 602
An enterprise replaces five-minute CLI polling with model-driven telemetry from IOS XE switches. The specific implementation objective is to configure producer and consumer. Which design action is most appropriate for this case?
- Assume every counter will emit on-change updates at a fixed interval
- Arrange device publisher, transport and authorized collector subscription
- Subscribe to an unrelated configuration label as if it measured link utilization
- Mark telemetry healthy merely because the collector process is running
Explanation
Correct Answer
B:Telemetry needs both data source and receiver.
Incorrect Answers
A:Counter streaming behavior depends on subscription mode.
C:The wrong path produces irrelevant data.
D:A running process may receive no valid measurements.
Question 603
An enterprise replaces five-minute CLI polling with model-driven telemetry from IOS XE switches. The specific implementation objective is to choose subscription cadence. What should the engineer implement for this specific objective?
- Mark telemetry healthy merely because the collector process is running
- Subscribe to an unrelated configuration label as if it measured link utilization
- Select sample or on-change mode appropriate to the supported metric
- Enable a device knob without provisioning any collector endpoint
Explanation
Correct Answer
C:Sampling and event changes expose different temporal detail.
Incorrect Answers
A:A running process may receive no valid measurements.
B:The wrong path produces irrelevant data.
D:No consumer means no useful telemetry pipeline.
Question 604
An enterprise replaces five-minute CLI polling with model-driven telemetry from IOS XE switches. The specific implementation objective is to validate collector ingestion. Which adjustment would satisfy this particular constraint?
- Enable a device knob without provisioning any collector endpoint
- Compare received records against expected sensor and device identifiers
- Assume every counter will emit on-change updates at a fixed interval
- Subscribe to an unrelated configuration label as if it measured link utilization
Explanation
Correct Answer
B:Receive success requires accurate mapping to devices.
Incorrect Answers
A:No consumer means no useful telemetry pipeline.
C:Counter streaming behavior depends on subscription mode.
D:The wrong path produces irrelevant data.
Question 605
An enterprise replaces five-minute CLI polling with model-driven telemetry from IOS XE switches. The deployment plan must both (1) identify modeled sensor path and (2) choose subscription cadence. Which TWO actions together satisfy those requirements? Choose TWO.
- Enable a device knob without provisioning any collector endpoint
- Subscribe to an unrelated configuration label as if it measured link utilization
- Mark telemetry healthy merely because the collector process is running
- Select sample or on-change mode appropriate to the supported metric
- Select a supported YANG-modeled operational path for desired interface metrics
Explanation
Correct Answers
D:Sampling and event changes expose different temporal detail.
E:Model path defines what data is emitted.
Incorrect Answers
A:No consumer means no useful telemetry pipeline.
B:The wrong path produces irrelevant data.
C:A running process may receive no valid measurements.
Question 606
An enterprise replaces five-minute CLI polling with model-driven telemetry from IOS XE switches. Three conditions must be met: (1) identify modeled sensor path; (2) configure producer and consumer; and (3) validate collector ingestion. Which THREE actions form the narrowest complete plan? Choose THREE.
- Compare received records against expected sensor and device identifiers
- Mark telemetry healthy merely because the collector process is running
- Assume every counter will emit on-change updates at a fixed interval
- Select a supported YANG-modeled operational path for desired interface metrics
- Arrange device publisher, transport and authorized collector subscription
- Subscribe to an unrelated configuration label as if it measured link utilization
Explanation
Correct Answers
A:Receive success requires accurate mapping to devices.
D:Model path defines what data is emitted.
E:Telemetry needs both data source and receiver.
Incorrect Answers
B:A running process may receive no valid measurements.
C:Counter streaming behavior depends on subscription mode.
F:The wrong path produces irrelevant data.
Question 607
Network operations sees missing counters because collectors are not subscribed to the intended YANG sensor path. Independently, reviewers flag this potentially unsafe practice for assessment: 'Subscribe to an unrelated configuration label as if it measured link utilization'. Which inspection most directly evaluates that practice?
- Assume every counter will emit on-change updates at a fixed interval
- Inspect sensor records and ingest lag
- Inspect subscription and collector registration
- Inspect advertised models and subscription path
Explanation
Correct Answer
D:The wrong path produces irrelevant data. The intended behavior is: Model path defines what data is emitted.
Incorrect Answers
A:Counter streaming behavior depends on subscription mode.
B:This checks validate collector ingestion, not the named failure. Receive success requires accurate mapping to devices.
C:This checks configure producer and consumer, not the named failure. Telemetry needs both data source and receiver.
Question 608
Network operations sees missing counters because collectors are not subscribed to the intended YANG sensor path. Independently, reviewers flag this potentially unsafe practice for assessment: 'Enable a device knob without provisioning any collector endpoint'. What diagnostic evidence should first be collected to assess that practice?
- Inspect sensor records and ingest lag
- Inspect subscription and collector registration
- Assume every counter will emit on-change updates at a fixed interval
- Inspect advertised models and subscription path
Explanation
Correct Answer
B:No consumer means no useful telemetry pipeline. The intended behavior is: Telemetry needs both data source and receiver.
Incorrect Answers
A:This checks validate collector ingestion, not the named failure. Receive success requires accurate mapping to devices.
C:Counter streaming behavior depends on subscription mode.
D:This checks identify modeled sensor path, not the named failure. Model path defines what data is emitted.
Question 609
Network operations sees missing counters because collectors are not subscribed to the intended YANG sensor path. Independently, reviewers flag this potentially unsafe practice for assessment: 'Assume every counter will emit on-change updates at a fixed interval'. Which focused check best tests this specific assumption?
- Inspect sensor records and ingest lag
- Enable a device knob without provisioning any collector endpoint
- Inspect subscription mode and update timestamps
- Inspect advertised models and subscription path
Explanation
Correct Answer
C:Counter streaming behavior depends on subscription mode. The intended behavior is: Sampling and event changes expose different temporal detail.
Incorrect Answers
A:This checks validate collector ingestion, not the named failure. Receive success requires accurate mapping to devices.
B:No consumer means no useful telemetry pipeline.
D:This checks identify modeled sensor path, not the named failure. Model path defines what data is emitted.
Question 610
Network operations sees missing counters because collectors are not subscribed to the intended YANG sensor path. Independently, reviewers flag this potentially unsafe practice for assessment: 'Mark telemetry healthy merely because the collector process is running'. Which verification addresses that practice without assuming it caused the incident?
- Assume every counter will emit on-change updates at a fixed interval
- Inspect sensor records and ingest lag
- Inspect advertised models and subscription path
- Inspect subscription and collector registration
Explanation
Correct Answer
B:A running process may receive no valid measurements. The intended behavior is: Receive success requires accurate mapping to devices.
Incorrect Answers
A:Counter streaming behavior depends on subscription mode.
C:This checks identify modeled sensor path, not the named failure. Model path defines what data is emitted.
D:This checks configure producer and consumer, not the named failure. Telemetry needs both data source and receiver.
Designing, Deploying, and Managing Network Automation Systems (350-901) Practice Tests