100% Latest & Updated Fortinet NSE5_SSE_AD-7.6 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!
Question 420
Select TWO options. Which mutually consistent response elements resolve the failure and demonstrate controlled recovery? Two identical default routes are installed with different distances, and operations expects active-active selection despite unequal route preference.
- Private headquarters traffic uses available approved tunnels rather than an old member reference.
- Review route distances, ECMP eligibility and SD-WAN rule behavior together rather than assuming both routes participate.
- Update the private route's zone and next-hop dependencies to the intended active overlay set.
- Trace headquarters traffic and inspect route installation and tunnel egress after remediation.
- Inspect selected routing entry and member distribution for multiple new sessions.
Explanation
Correct Answers
B:The specific correction for the fault is: Review route distances, ECMP eligibility and SD-WAN rule behavior together rather than assuming both routes participate. The operational distinction is: Routing and next-hop reachability still govern viable forwarding even after an SD-WAN preference is configured. A defensible decision joins Review route distances, ECMP eligibility and SD-WAN rule behavior together rather than assuming both routes participate. with evidence Inspect selected routing entry and member distribution for multiple new sessions. and the operating result The actual route and SD-WAN design agrees with the intended active-active or preferred-backup behavior.
E:Inspect selected routing entry and member distribution for multiple new sessions. This verifies the required result: the actual route and SD-WAN design agrees with the intended active-active or preferred-backup behavior.
Incorrect Answers
A:This end state is associated with a different failure (Operations sees both overlay tunnels up but the selected route to headquarters still points at an obsolete tunnel name.). It does not show the required case result The actual route and SD-WAN design agrees with the intended active-active or preferred-backup behavior. A defensible decision joins Review route distances, ECMP eligibility and SD-WAN rule behavior together rather than assuming both routes participate. with evidence Inspect selected routing entry and member distribution for multiple new sessions. and the operating result The actual route and SD-WAN design agrees with the intended active-active or preferred-backup behavior.
C:That action addresses a different fault: Operations sees both overlay tunnels up but the selected route to headquarters still points at an obsolete tunnel name. Here, review route distances, ECMP eligibility and SD-WAN rule behavior together rather than assuming both routes participate.
D:This test measures another incident (Operations sees both overlay tunnels up but the selected route to headquarters still points at an obsolete tunnel name.) and would not establish correction here. The missing evidence for the actual fault is Inspect selected routing entry and member distribution for multiple new sessions. A defensible decision joins Review route distances, ECMP eligibility and SD-WAN rule behavior together rather than assuming both routes participate. with evidence Inspect selected routing entry and member distribution for multiple new sessions. and the operating result The actual route and SD-WAN design agrees with the intended active-active or preferred-backup behavior.
Question 421
An administrator receives this incident: After a link failure, route entries remain stale because their state update is decoupled from the configured SLA monitor. Which scoped correction is warranted?
- Configure and test supported route withdrawal/restoration on the relevant link monitor.
- Inspect longest-prefix route selection and align intended specific routes before changing rule preferences.
- Correct the misplaced more-specific route after verifying destination ownership and security intent.
- Align route availability with supported tunnel or health state and verify alternate-member behavior.
Explanation
Correct Answer
A:Configure and test supported route withdrawal/restoration on the relevant link monitor. The technical reason is that routing and next-hop reachability still govern viable forwarding even after an SD-WAN preference is configured. Scope the change to the reported fault without broadening access.
Incorrect Answers
B:That action addresses a different fault: An administrator sees a preferred SD-WAN member healthy but new sessions reach an alternate path because the route lookup chooses a more-specific route. Here, configure and test supported route withdrawal/restoration on the relevant link monitor.
C:That action addresses a different fault: A BGP route learned across SD-WAN overlays is valid, but the application still exits a public underlay because a more-specific route points there. Here, configure and test supported route withdrawal/restoration on the relevant link monitor.
D:That action addresses a different fault: A tunnel overlay must reach a private prefix only when the remote peer is alive, but a persistent static route remains even when the tunnel is unusable. Here, configure and test supported route withdrawal/restoration on the relevant link monitor.
Question 422
Which targeted observation best distinguishes recovery from an unrelated success signal? After a link failure, route entries remain stale because their state update is decoupled from the configured SLA monitor.
- Compare route-table entries, firewall matches, and selected member for authorized internet sessions.
- Inspect connected and static route priority and end-to-end reachability for both subnets.
- Capture route table and health-check status before, during, and after a controlled failure.
- Compare destination prefix lookup and egress for the SaaS test flow and internal app flows.
Explanation
Correct Answer
C:This check measures the current failure rather than an unrelated one: Capture route table and health-check status before, during, and after a controlled failure. It supports the required recovered state: Routing tables exclude the failed path and restore it when the intended health criteria recover. An effective test must observe the condition Capture route table and health-check status before, during, and after a controlled failure. rather than merely show that a configuration object exists.
Incorrect Answers
A:That test addresses another incident: An engineer assumes that an SD-WAN zone referenced in a firewall rule automatically installs an internet default route. The relevant verification here is capture route table and health-check status before, during, and after a controlled failure.
B:That test addresses another incident: A static route to a remote site uses the same address space as a local VLAN, causing route ambiguity during an SD-WAN migration. The relevant verification here is capture route table and health-check status before, during, and after a controlled failure.
D:That test addresses another incident: A branch needs to reach a SaaS service directly but a broad internal route covers its destination through the private hub. The relevant verification here is capture route table and health-check status before, during, and after a controlled failure.
Question 423
For this issue, which end state should the service owner require? After a link failure, route entries remain stale because their state update is decoupled from the configured SLA monitor.
- A complete forwarding path exists alongside the separate security-policy authorization.
- The chosen route participates in the designed SD-WAN policy rather than an accidental bypass.
- Management probes use the correct reachable path and do not distort user-session routing.
- Routing tables exclude the failed path and restore it when the intended health criteria recover.
Explanation
Correct Answer
D:Routing tables exclude the failed path and restore it when the intended health criteria recover. Verify it after configure and test supported route withdrawal/restoration on the relevant link monitor.
Incorrect Answers
A:That outcome concerns a separate failure: An engineer assumes that an SD-WAN zone referenced in a firewall rule automatically installs an internet default route. The required result here is: Routing tables exclude the failed path and restore it when the intended health criteria recover.
B:That outcome concerns a separate failure: A preferred WAN link appears in the SD-WAN member list but its route has higher distance than a competing static route that bypasses the zone. The required result here is: Routing tables exclude the failed path and restore it when the intended health criteria recover.
C:That outcome concerns a separate failure: An operator changes the local-out monitoring server and unintentionally routes the FortiGate's own probe traffic through an unrelated SD-WAN zone. The required result here is: Routing tables exclude the failed path and restore it when the intended health criteria recover.
Question 424
Which mutually consistent response elements resolve the failure and demonstrate controlled recovery? After a link failure, route entries remain stale because their state update is decoupled from the configured SLA monitor.
- Check session state and supported reevaluation rules before forcing disruptive session changes.
- Use supported learned-gateway routing for that link and review the member's gateway handling.
- Analyze the actual route and policy-route lookup sequence for the affected flow before changing rules.
- Configure and test supported route withdrawal/restoration on the relevant link monitor.
Explanation
Correct Answer
D:The specific correction for the fault is: Configure and test supported route withdrawal/restoration on the relevant link monitor. The operational distinction is: Routing and next-hop reachability still govern viable forwarding even after an SD-WAN preference is configured. A defensible decision joins Configure and test supported route withdrawal/restoration on the relevant link monitor. with evidence Capture route table and health-check status before, during, and after a controlled failure. and the operating result Routing tables exclude the failed path and restore it when the intended health criteria recover.
Incorrect Answers
A:That action addresses a different fault: During WAN failback, newly established sessions use a repaired primary while old sessions remain on backup, and the team calls this a routing failure. Here, configure and test supported route withdrawal/restoration on the relevant link monitor.
B:That action addresses a different fault: A provider uses PPPoE and updates its gateway dynamically, but the SD-WAN route assumes a permanently fixed next hop. Here, configure and test supported route withdrawal/restoration on the relevant link monitor.
C:That action addresses a different fault: A cloud application sometimes follows an unintended exit because route policy and SD-WAN steering were modified without reviewing their order of operations. Here, configure and test supported route withdrawal/restoration on the relevant link monitor.
Question 425
Select THREE options. An administrator receives this incident: A branch needs to reach a SaaS service directly but a broad internal route covers its destination through the private hub. Which scoped correction is warranted?
- The SaaS destination uses permitted direct internet access without breaking private-prefix routing.
- Narrow or correct the overbroad route while preserving approved private destinations and security inspection.
- Compare rule election with route-table and next-hop evidence for the specific destination.
- A selected member is also a valid forwarding path to the intended destination.
- Compare destination prefix lookup and egress for the SaaS test flow and internal app flows.
- Repair the necessary route or change candidate selection based on actual destination reachability.
Explanation
Correct Answers
A:The intended recovery condition is: The SaaS destination uses permitted direct internet access without breaking private-prefix routing. It follows only after the control Narrow or correct the overbroad route while preserving approved private destinations and security inspection. is applied and validated. The change must repair the fault in A branch needs to reach a SaaS service directly but a broad internal route covers its destination through the private hub. and must not introduce a broader access exception.
B:Narrow or correct the overbroad route while preserving approved private destinations and security inspection. The technical reason is that routing and next-hop reachability still govern viable forwarding even after an SD-WAN preference is configured. Scope the change to the reported fault without broadening access.
E:This check measures the current failure rather than an unrelated one: Compare destination prefix lookup and egress for the SaaS test flow and internal app flows. It supports the required recovered state: The SaaS destination uses permitted direct internet access without breaking private-prefix routing. The change must repair the fault in A branch needs to reach a SaaS service directly but a broad internal route covers its destination through the private hub. and must not introduce a broader access exception.
Incorrect Answers
C:This test measures another incident (An SD-WAN service rule names a link that is healthy, but no installed route reaches the destination through that member.) and would not establish correction here. The missing evidence for the actual fault is Compare destination prefix lookup and egress for the SaaS test flow and internal app flows. The change must repair the fault in A branch needs to reach a SaaS service directly but a broad internal route covers its destination through the private hub. and must not introduce a broader access exception.
D:This end state is associated with a different failure (An SD-WAN service rule names a link that is healthy, but no installed route reaches the destination through that member.). It does not show the required case result The SaaS destination uses permitted direct internet access without breaking private-prefix routing. The change must repair the fault in A branch needs to reach a SaaS service directly but a broad internal route covers its destination through the private hub. and must not introduce a broader access exception.
F:That action addresses a different fault: An SD-WAN service rule names a link that is healthy, but no installed route reaches the destination through that member. Here, narrow or correct the overbroad route while preserving approved private destinations and security inspection.
Question 426
Which targeted observation best distinguishes recovery from an unrelated success signal? A branch needs to reach a SaaS service directly but a broad internal route covers its destination through the private hub.
- Inspect best-route selection and new-session egress with both links healthy.
- Compare destination prefix lookup and egress for the SaaS test flow and internal app flows.
- Inspect route resolution, ARP/neighbor state and forwarding on the changed member.
- Inspect policy-route hits and route/member state for representative affected sessions.
Explanation
Correct Answer
B:This check measures the current failure rather than an unrelated one: Compare destination prefix lookup and egress for the SaaS test flow and internal app flows. It supports the required recovered state: The SaaS destination uses permitted direct internet access without breaking private-prefix routing. An effective test must observe the condition Compare destination prefix lookup and egress for the SaaS test flow and internal app flows. rather than merely show that a configuration object exists.
Incorrect Answers
A:That test addresses another incident: A preferred WAN link appears in the SD-WAN member list but its route has higher distance than a competing static route that bypasses the zone. The relevant verification here is compare destination prefix lookup and egress for the SaaS test flow and internal app flows.
C:That test addresses another incident: The WAN team changes one provider gateway after a maintenance window but a member static route continues pointing to the old next hop. The relevant verification here is compare destination prefix lookup and egress for the SaaS test flow and internal app flows.
D:That test addresses another incident: A policy route forces one class of traffic through a provider that has become unhealthy; a generic SD-WAN rule appears unable to help. The relevant verification here is compare destination prefix lookup and egress for the SaaS test flow and internal app flows.
Question 427
For this issue, which end state should the service owner require? A branch needs to reach a SaaS service directly but a broad internal route covers its destination through the private hub.
- The chosen route participates in the designed SD-WAN policy rather than an accidental bypass.
- A selected member is also a valid forwarding path to the intended destination.
- Routing decisions honor the actual most-specific reachable route and service intent.
- The SaaS destination uses permitted direct internet access without breaking private-prefix routing.
Explanation
Correct Answer
D:The SaaS destination uses permitted direct internet access without breaking private-prefix routing. Verify it after narrow or correct the overbroad route while preserving approved private destinations and security inspection.
Incorrect Answers
A:That outcome concerns a separate failure: A preferred WAN link appears in the SD-WAN member list but its route has higher distance than a competing static route that bypasses the zone. The required result here is: The SaaS destination uses permitted direct internet access without breaking private-prefix routing.
B:That outcome concerns a separate failure: An SD-WAN service rule names a link that is healthy, but no installed route reaches the destination through that member. The required result here is: The SaaS destination uses permitted direct internet access without breaking private-prefix routing.
C:That outcome concerns a separate failure: An administrator sees a preferred SD-WAN member healthy but new sessions reach an alternate path because the route lookup chooses a more-specific route. The required result here is: The SaaS destination uses permitted direct internet access without breaking private-prefix routing.
Question 428
Which mutually consistent response elements resolve the failure and demonstrate controlled recovery? A branch needs to reach a SaaS service directly but a broad internal route covers its destination through the private hub.
- Check session state and supported reevaluation rules before forcing disruptive session changes.
- Analyze the actual route and policy-route lookup sequence for the affected flow before changing rules.
- Correct the erroneous partner-prefix route and preserve any necessary authorized overlay route.
- Narrow or correct the overbroad route while preserving approved private destinations and security inspection.
Explanation
Correct Answer
D:The specific correction for the fault is: Narrow or correct the overbroad route while preserving approved private destinations and security inspection. The operational distinction is: Routing and next-hop reachability still govern viable forwarding even after an SD-WAN preference is configured. A defensible decision joins Narrow or correct the overbroad route while preserving approved private destinations and security inspection. with evidence Compare destination prefix lookup and egress for the SaaS test flow and internal app flows. and the operating result The SaaS destination uses permitted direct internet access without breaking private-prefix routing.
Incorrect Answers
A:That action addresses a different fault: During WAN failback, newly established sessions use a repaired primary while old sessions remain on backup, and the team calls this a routing failure. Here, narrow or correct the overbroad route while preserving approved private destinations and security inspection.
B:That action addresses a different fault: A cloud application sometimes follows an unintended exit because route policy and SD-WAN steering were modified without reviewing their order of operations. Here, narrow or correct the overbroad route while preserving approved private destinations and security inspection.
C:That action addresses a different fault: A route for a partner subnet is accidentally more specific than the general datacenter route and points at a guest internet zone. Here, narrow or correct the overbroad route while preserving approved private destinations and security inspection.
Question 429
An administrator receives this incident: A static route to a remote site uses the same address space as a local VLAN, causing route ambiguity during an SD-WAN migration. Which scoped correction is warranted?
- Review route preference and remove or adjust the obsolete static route under change control.
- Verify destination route and member eligibility across both overlays and ensure backup path selection is allowed.
- Add the required route and confirm it is usable independently of the firewall's permission decision.
- Resolve overlapping addressing or route design explicitly rather than forcing a broad policy-route workaround.
Explanation
Correct Answer
D:Resolve overlapping addressing or route design explicitly rather than forcing a broad policy-route workaround. The technical reason is that routing and next-hop reachability still govern viable forwarding even after an SD-WAN preference is configured. Scope the change to the reported fault without broadening access.
Incorrect Answers
A:This action is suited to a different fault: A FortiGate receives a dynamic BGP private route but an old high-priority static entry masks it, causing a blackhole after migration. In this case the necessary change is Resolve overlapping addressing or route design explicitly rather than forcing a broad policy-route workaround. The alternative leaves the reported control defect unresolved. The change must repair the fault in A static route to a remote site uses the same address space as a local VLAN, causing route ambiguity during an SD-WAN migration. and must not introduce a broader access exception.
B:That action addresses a different fault: A private application loses connectivity when a primary overlay goes down, although a backup overlay is healthy and in the same zone. Here, resolve overlapping addressing or route design explicitly rather than forcing a broad policy-route workaround.
C:That action addresses a different fault: An engineer assumes that an SD-WAN zone referenced in a firewall rule automatically installs an internet default route. Here, resolve overlapping addressing or route design explicitly rather than forcing a broad policy-route workaround.
Question 430
Select TWO options. Which targeted observation best distinguishes recovery from an unrelated success signal? A static route to a remote site uses the same address space as a local VLAN, causing route ambiguity during an SD-WAN migration.
- Resolve overlapping addressing or route design explicitly rather than forcing a broad policy-route workaround.
- Align route availability with supported tunnel or health state and verify alternate-member behavior.
- Inspect connected and static route priority and end-to-end reachability for both subnets.
- New private flows avoid a known-unavailable tunnel when an approved alternate route exists.
- Inspect route installation and private-prefix connectivity during simulated tunnel loss.
Explanation
Correct Answers
A:The specific correction for the fault is: Resolve overlapping addressing or route design explicitly rather than forcing a broad policy-route workaround. The operational distinction is: Routing and next-hop reachability still govern viable forwarding even after an SD-WAN preference is configured. An effective test must observe the condition Inspect connected and static route priority and end-to-end reachability for both subnets. rather than merely show that a configuration object exists.
C:This check measures the current failure rather than an unrelated one: Inspect connected and static route priority and end-to-end reachability for both subnets. It supports the required recovered state: Traffic consistently reaches the correct segment without ambiguous overlapping route assumptions. An effective test must observe the condition Inspect connected and static route priority and end-to-end reachability for both subnets. rather than merely show that a configuration object exists.
Incorrect Answers
B:This action is suited to a different fault: A tunnel overlay must reach a private prefix only when the remote peer is alive, but a persistent static route remains even when the tunnel is unusable. In this case the necessary change is Resolve overlapping addressing or route design explicitly rather than forcing a broad policy-route workaround. The alternative leaves the reported control defect unresolved. An effective test must observe the condition Inspect connected and static route priority and end-to-end reachability for both subnets. rather than merely show that a configuration object exists.
D:This end state is associated with a different failure (A tunnel overlay must reach a private prefix only when the remote peer is alive, but a persistent static route remains even when the tunnel is unusable.). It does not show the required case result Traffic consistently reaches the correct segment without ambiguous overlapping route assumptions. An effective test must observe the condition Inspect connected and static route priority and end-to-end reachability for both subnets. rather than merely show that a configuration object exists.
E:That test addresses another incident: A tunnel overlay must reach a private prefix only when the remote peer is alive, but a persistent static route remains even when the tunnel is unusable. The relevant verification here is inspect connected and static route priority and end-to-end reachability for both subnets.
Fortinet NSE 5 - FortiSASE and SD-WAN 7.6 Core Administrator (NSE5_SSE_AD-7.6) Practice Tests