100% Latest & Updated Juniper JN0-364 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!
Question 350
The missing customer VLAN shows no destination MAC learning on one side after a maintenance change to trunk membership. Independently, the review flags the potentially unsafe practice “Assume 802.1Q and Q-in-Q handoffs are interchangeable on every port”. Which validation addresses the risk without assuming a particular cause?
- Inspect VLAN table and logical interface assignments
- Reset every MAC table without recording evidence of a failure
- Capture frames and compare ingress and egress VLAN tags
- Review ingress and egress trunk VLAN allow lists
Explanation
Correct Answer
C:Different tag depth and TPID conventions affect delivery. Mismatched access, trunk or Q-in-Q encapsulation can drop one service.
Incorrect Answers
A:A VLAN absent from one side cannot forward as intended.
B:Clearing state destroys useful localization evidence.
D:A blocked VLAN ID drops frames before MAC learning.
Question 351
A provider LAN has three interconnected bridges and the engineering plan requires a stable designated root for deterministic loop avoidance. The objective is to choose root intentionally. Which Junos configuration or design action best satisfies the objective?
- Configure an approved bridge priority to favor the intended root bridge
- Force every redundant port into forwarding to maximize capacity
- Choose a root port solely because it has the lowest interface name
- Declare resilience proven by the configured bridge priority
Explanation
Correct Answer
A:Root election is based on bridge identifier criteria.
Incorrect Answers
B:Uncontrolled redundant forwarding can cause broadcast storms.
C:Port names alone are not root path criteria.
D:A priority value does not show convergence outcome.
Question 352
A provider LAN has three interconnected bridges and the engineering plan requires a stable designated root for deterministic loop avoidance. The objective is to interpret root path cost. Which operational choice should be prioritized in this design?
- Assume the switch with the fastest port becomes root by definition
- Compare accumulated root path costs from each bridge to the elected root
- Declare resilience proven by the configured bridge priority
- Force every redundant port into forwarding to maximize capacity
Explanation
Correct Answer
B:Root-port selection depends on path and bridge tie breakers.
Incorrect Answers
A:Port speed does not solely determine bridge ID election.
C:A priority value does not show convergence outcome.
D:Uncontrolled redundant forwarding can cause broadcast storms.
Question 353
A provider LAN has three interconnected bridges and the engineering plan requires a stable designated root for deterministic loop avoidance. The objective is to preserve redundant loop-free paths. Which routing or switching control best fits the requirement?
- Allow spanning-tree to block or discard redundant links where needed
- Choose a root port solely because it has the lowest interface name
- Assume the switch with the fastest port becomes root by definition
- Declare resilience proven by the configured bridge priority
Explanation
Correct Answer
A:Blocking one redundant segment prevents persistent Layer 2 loops.
Incorrect Answers
B:Port names alone are not root path criteria.
C:Port speed does not solely determine bridge ID election.
D:A priority value does not show convergence outcome.
Question 354
A provider LAN has three interconnected bridges and the engineering plan requires a stable designated root for deterministic loop avoidance. The objective is to validate root change. Which verification should be performed before approving the change?
- Perform a controlled root-failure test and inspect reconvergence
- Choose a root port solely because it has the lowest interface name
- Force every redundant port into forwarding to maximize capacity
- Assume the switch with the fastest port becomes root by definition
Explanation
Correct Answer
A:A documented root choice needs operational failover validation.
Incorrect Answers
B:Port names alone are not root path criteria.
C:Uncontrolled redundant forwarding can cause broadcast storms.
D:Port speed does not solely determine bridge ID election.
Question 355
A provider LAN has three interconnected bridges and the engineering plan requires a stable designated root for deterministic loop avoidance. Two objectives apply: (1) interpret root path cost; and (2) validate root change. Which TWO controls together satisfy the requirements? Choose TWO.
- Compare accumulated root path costs from each bridge to the elected root
- Choose a root port solely because it has the lowest interface name
- Force every redundant port into forwarding to maximize capacity
- Perform a controlled root-failure test and inspect reconvergence
- Declare resilience proven by the configured bridge priority
Explanation
Correct Answers
A:Root-port selection depends on path and bridge tie breakers.
D:A documented root choice needs operational failover validation.
Incorrect Answers
B:Port names alone are not root path criteria.
C:Uncontrolled redundant forwarding can cause broadcast storms.
E:A priority value does not show convergence outcome.
Question 356
A provider LAN has three interconnected bridges and the engineering plan requires a stable designated root for deterministic loop avoidance. Three objectives apply: (1) choose root intentionally; (2) interpret root path cost; and (3) validate root change. Which THREE controls together satisfy the requirements? Choose THREE.
- Force every redundant port into forwarding to maximize capacity
- Choose a root port solely because it has the lowest interface name
- Declare resilience proven by the configured bridge priority
- Compare accumulated root path costs from each bridge to the elected root
- Perform a controlled root-failure test and inspect reconvergence
- Configure an approved bridge priority to favor the intended root bridge
Explanation
Correct Answers
D:Root-port selection depends on path and bridge tie breakers.
E:A documented root choice needs operational failover validation.
F:Root election is based on bridge identifier criteria.
Incorrect Answers
A:Uncontrolled redundant forwarding can cause broadcast storms.
B:Port names alone are not root path criteria.
C:A priority value does not show convergence outcome.
Question 357
After adding a switch, traffic briefly reconverges through an unexpected root because bridge priorities were left unreviewed. Independently, the review flags the potentially unsafe practice “Assume the switch with the fastest port becomes root by definition”. Which inspection best evaluates that practice?
- Declare resilience proven by the configured bridge priority
- Inspect bridge priorities and elected root identifier
- Inspect per-port roles and forwarding or discarding state
- Inspect root-port role and root path cost
Explanation
Correct Answer
B:Port speed does not solely determine bridge ID election. Root election is based on bridge identifier criteria.
Incorrect Answers
A:A priority value does not show convergence outcome.
C:Blocking one redundant segment prevents persistent Layer 2 loops.
D:Root-port selection depends on path and bridge tie breakers.
Question 358
After adding a switch, traffic briefly reconverges through an unexpected root because bridge priorities were left unreviewed. Independently, the review flags the potentially unsafe practice “Choose a root port solely because it has the lowest interface name”. Which evidence most directly tests the flagged assumption?
- Declare resilience proven by the configured bridge priority
- Inspect bridge priorities and elected root identifier
- Inspect per-port roles and forwarding or discarding state
- Inspect root-port role and root path cost
Explanation
Correct Answer
D:Port names alone are not root path criteria. Root-port selection depends on path and bridge tie breakers.
Incorrect Answers
A:A priority value does not show convergence outcome.
B:Root election is based on bridge identifier criteria.
C:Blocking one redundant segment prevents persistent Layer 2 loops.
Question 359
After adding a switch, traffic briefly reconverges through an unexpected root because bridge priorities were left unreviewed. Independently, the review flags the potentially unsafe practice “Force every redundant port into forwarding to maximize capacity”. Which diagnostic check tests this potentially unsafe choice?
- Inspect bridge priorities and elected root identifier
- Choose a root port solely because it has the lowest interface name
- Inspect per-port roles and forwarding or discarding state
- Review root transition history and traffic during test
Explanation
Correct Answer
C:Uncontrolled redundant forwarding can cause broadcast storms. Blocking one redundant segment prevents persistent Layer 2 loops.
Incorrect Answers
A:Root election is based on bridge identifier criteria.
B:Port names alone are not root path criteria.
D:A documented root choice needs operational failover validation.
Question 360
After adding a switch, traffic briefly reconverges through an unexpected root because bridge priorities were left unreviewed. Independently, the review flags the potentially unsafe practice “Declare resilience proven by the configured bridge priority”. Which validation addresses the risk without assuming a particular cause?
- Review root transition history and traffic during test
- Inspect root-port role and root path cost
- Force every redundant port into forwarding to maximize capacity
- Inspect bridge priorities and elected root identifier
Explanation
Correct Answer
A:A priority value does not show convergence outcome. A documented root choice needs operational failover validation.
Incorrect Answers
B:Root-port selection depends on path and bridge tie breakers.
C:Uncontrolled redundant forwarding can cause broadcast storms.
D:Root election is based on bridge identifier criteria.
Service Provider Routing and Switching, Specialist (JNCIS-SP) (JN0-364) Practice Tests