Juniper JN0-650 Exam Dumps, Practice Test Questions

100% Latest & Updated Juniper JN0-650 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!

Juniper JN0-650  Premium File
$54.99
$49.99

JN0-650 Premium File

  • Premium File: 107 Questions & Answers. Last update: Nov 7, 2026
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates

JN0-650 Premium File

Juniper JN0-650  Premium File
  • Premium File: 107 Questions & Answers. Last update: Nov 7, 2026
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates
$54.99
$49.99

Juniper JN0-650 Practice Test 34

Question 330

The team believes it has resolved this Junos issue: A backup traffic queue consumes too much buffer and latency-sensitive applications starve during peak bursts. Which observation best verifies the specific intended result?

  1. Outgoing traffic conforms to the contracted rate with acceptable delay and fewer burst losses.
  2. Queue depth, latency and drop statistics meet documented objectives during realistic traffic load.
  3. Packet captures show the intended DSCP or 802.1p fields on outbound voice, video and data traffic.
  4. During controlled congestion, out-of-profile traffic experiences earlier drops than in-profile traffic.

Explanation

Correct Answer

B:

Queue depth, latency and drop statistics meet documented objectives during realistic traffic load. This checks the relevant result after review queue buffer and scheduler allocations against traffic measurements and apply a bounded adjustment.

Incorrect Answers

A:

“Outgoing traffic conforms to the contracted rate with acceptable delay and fewer burst losses” belongs to a separate Class of Service (CoS) issue: a WAN customer requires smooth outbound transmission but an ingress drop policer creates unnecessary burst loss. It does not explain the condition tested here.

C:

“Packet captures show the intended DSCP or 802.1p fields on outbound voice, video and data traffic” belongs to a separate Class of Service (CoS) issue: a provider handoff expects specific code-point markings yet a trunk rewrites every service class to default behavior. It does not explain the condition tested here.

D:

“During controlled congestion, out-of-profile traffic experiences earlier drops than in-profile traffic” belongs to a separate Class of Service (CoS) issue: a business wants out-of-profile marked traffic to drop earlier than in-profile traffic within one forwarding class. It does not explain the condition tested here.

Question 331

To prevent recurrence of this precise networking failure, which practice should be adopted? A legacy interop design needs separate per-VLAN spanning-tree compatibility but all VLANs inherit one unsuitable tree.

  1. Check policy coverage and unintended-match cases before activating filter-based steering.
  2. Document primary/secondary VLAN mappings and test permitted peer groups and isolation boundaries.
  3. Test each critical VLAN's root bridge and forwarding path after VSTP updates.
  4. Maintain representative match and nonmatch tests for filter-based VLAN policies.

Explanation

Correct Answer

C:

Test each critical VLAN's root bridge and forwarding path after VSTP updates. This guards against VSTP provides per-VLAN spanning-tree behavior for compatibility and path control when the design and platform support it.

Incorrect Answers

A:

“Check policy coverage and unintended-match cases before activating filter-based steering” belongs to a separate Ethernet Switching and Spanning Tree issue: a filter-based VLAN security design uses a rule that catches too many packets and steers legitimate devices into quarantine. It does not explain the condition tested here.

B:

“Document primary/secondary VLAN mappings and test permitted peer groups and isolation boundaries” belongs to a separate Ethernet Switching and Spanning Tree issue: a switch rollout splits a team that should communicate within one PVLAN community, while protecting it from another community. It does not explain the condition tested here.

D:

“Maintain representative match and nonmatch tests for filter-based VLAN policies” belongs to a separate Ethernet Switching and Spanning Tree issue: a campus onboarding policy puts cameras on the normal data VLAN even though a targeted filter-based VLAN should steer them. It does not explain the condition tested here.

Question 332

A network change is required for the following specific situation: A low-latency queue is correctly classified but voice delays because its egress scheduler map is absent from the trunk. Which corrective action is most appropriate?

  1. Map the two packet categories to the intended PLP levels and verify drop-profile response.
  2. Associate the approved scheduler map with the correct egress interface and confirm class queue counters.
  3. Review the forwarding class and queue map for control and data traffic and apply the intended assignments.
  4. Apply the appropriate interface rewrite rule and verify the contract-specific egress code points.

Explanation

Correct Answer

B:

Egress scheduling requires the intended schedulers and their mapping to be applied on the outgoing interface. Verify this by checking that voice traffic receives the required scheduled service at the congested egress without starving other classes.

Incorrect Answers

A:

“Map the two packet categories to the intended PLP levels and verify drop-profile response” belongs to a separate Class of Service (CoS) issue: packets with two different drop precedence values are treated as equally discardable during congestion. It does not explain the condition tested here.

C:

“Review the forwarding class and queue map for control and data traffic and apply the intended assignments” belongs to a separate Class of Service (CoS) issue: an access router has many queue definitions but unexpected class-to-queue mappings cause control traffic to be delayed. It does not explain the condition tested here.

D:

“Apply the appropriate interface rewrite rule and verify the contract-specific egress code points” belongs to a separate Class of Service (CoS) issue: a provider handoff expects specific code-point markings yet a trunk rewrites every service class to default behavior. It does not explain the condition tested here.

Question 333

To prevent recurrence of this precise networking failure, which practice should be adopted? A lab uses one primary VLAN for many tenants but isolated access ports can still exchange Layer 2 frames after a misconfiguration.

  1. Keep explicit root priority policy and validate elections after device replacement.
  2. Test private-port isolation and uplink reachability after access topology changes.
  3. Track MSTP instance scale and maintain identical region parameters across participating switches.
  4. Version-control MSTP name, revision and VLAN mapping as one change unit.

Explanation

Correct Answer

B:

Test private-port isolation and uplink reachability after access topology changes. This guards against private VLAN isolated ports are designed to limit lateral L2 communication while still reaching the permitted promiscuous uplink.

Incorrect Answers

A:

“Keep explicit root priority policy and validate elections after device replacement” belongs to a separate Ethernet Switching and Spanning Tree issue: a switch with an unexpectedly low bridge priority becomes MSTP root and redirects aggregation traffic through an access closet. It does not explain the condition tested here.

C:

“Track MSTP instance scale and maintain identical region parameters across participating switches” belongs to a separate Ethernet Switching and Spanning Tree issue: a large campus places hundreds of VLANs in separate spanning-tree instances and reaches scale or CPU limits. It does not explain the condition tested here.

D:

“Version-control MSTP name, revision and VLAN mapping as one change unit” belongs to a separate Ethernet Switching and Spanning Tree issue: an uplink becomes a region boundary unexpectedly after an administrator changes an MSTP configuration name on only one switch. It does not explain the condition tested here.

Question 334

To prevent recurrence of this precise networking failure, which practice should be adopted? A core node shows a missing route while remote LSDBs include the corresponding external LSA after a local policy change.

  1. Include a checklist of advertised IPv6 service and loopback addresses in OSPFv3 acceptance.
  2. Record both LSDB presence and local RIB installation in OSPF troubleshooting runbooks.
  3. Reserve router IDs from a centrally managed inventory before zero-touch provisioning.
  4. Keep timer settings in shared configuration templates and validate both directions before rollout.

Explanation

Correct Answer

B:

Record both LSDB presence and local RIB installation in OSPF troubleshooting runbooks. This guards against local import policy can affect installed route visibility independently of the remote origination of LSAs.

Incorrect Answers

A:

“Include a checklist of advertised IPv6 service and loopback addresses in OSPFv3 acceptance” belongs to a separate Interior Gateway Protocols (IGPs) issue: a replacement router has IPv6 OSPFv3 adjacency yet does not advertise the loopback subnet required for monitoring. It does not explain the condition tested here.

C:

“Reserve router IDs from a centrally managed inventory before zero-touch provisioning” belongs to a separate Interior Gateway Protocols (IGPs) issue: a router's OSPF neighbor restarts repeatedly because duplicate router IDs were assigned to different routing nodes. It does not explain the condition tested here.

D:

“Keep timer settings in shared configuration templates and validate both directions before rollout” belongs to a separate Interior Gateway Protocols (IGPs) issue: an access-area adjacency drops after one device is changed to shorter OSPF Hello timers but its peer keeps prior settings. It does not explain the condition tested here.

Question 335

A Junos enterprise team investigates this incident: An access VLAN floods every multicast packet because IGMP snooping state was lost during migration. Which technical explanation most directly identifies the cause or design principle?

  1. Junos multicast RPF may use a dedicated routing table, so the effective RPF path must be inspected, not guessed from unicast traffic.
  2. Source-specific multicast uses (S,G) membership semantics and generally avoids ASM rendezvous-point discovery for that flow.
  3. IGMP reports express receiver interest, and IGMP snooping uses that interest to constrain Layer 2 replication.
  4. An RPF check is tied to the selected source path, so asymmetric arrival can invalidate otherwise reachable multicast traffic.

Explanation

Correct Answer

C:

IGMP reports express receiver interest, and IGMP snooping uses that interest to constrain Layer 2 replication. The appropriate response is to inspect IGMP joins and snooping membership per VLAN and correct membership handling on the actual access ports.

Incorrect Answers

A:

“Junos multicast RPF may use a dedicated routing table, so the effective RPF path must be inspected, not guessed from unicast traffic” belongs to a separate IP Multicast issue: a campus uses a separate inet.2 multicast RPF table and investigators inspect only inet.0, overlooking a stale source route. It does not explain the condition tested here.

B:

“Source-specific multicast uses (S,G) membership semantics and generally avoids ASM rendezvous-point discovery for that flow” belongs to a separate IP Multicast issue: a controlled one-source data feed requires group membership constrained by both source and group, not arbitrary senders. It does not explain the condition tested here.

D:

“An RPF check is tied to the selected source path, so asymmetric arrival can invalidate otherwise reachable multicast traffic” belongs to a separate IP Multicast issue: a stream uses asymmetric unicast routing; multicast forwarding fails intermittently although individual host routes work. It does not explain the condition tested here.

Question 336

To prevent recurrence of this precise networking failure, which practice should be adopted? A troubleshooting team expects EVPN Ethernet auto-discovery route Type 1 to carry all host MAC/IP bindings.

  1. Include encapsulation headroom and path MTU tests in EVPN-VXLAN design validation.
  2. Keep route-type purpose and acceptance checks in EVPN troubleshooting runbooks.
  3. Maintain a central VNI registry and test cross-tenant isolation on each leaf rollout.
  4. Audit ESI consistency and platform-supported multihoming mode across paired leafs.

Explanation

Correct Answer

B:

Keep route-type purpose and acceptance checks in EVPN troubleshooting runbooks. This guards against EVPN route types carry different information: Type 1 Ethernet auto-discovery, Type 2 MAC/IP, Type 3 inclusive multicast.

Incorrect Answers

A:

“Include encapsulation headroom and path MTU tests in EVPN-VXLAN design validation” belongs to a separate EVPN issue: an EVPN-VXLAN frame is dropped over a path where the IP underlay MTU was sized only for unencapsulated Ethernet payloads. It does not explain the condition tested here.

C:

“Maintain a central VNI registry and test cross-tenant isolation on each leaf rollout” belongs to a separate EVPN issue: a fabric uses conflicting VLAN-to-VNI mappings on two leaf switches, bridging different tenant segments together. It does not explain the condition tested here.

D:

“Audit ESI consistency and platform-supported multihoming mode across paired leafs” belongs to a separate EVPN issue: a multihomed CE is attached to two leafs but one leaf advertises a different ESI, preventing expected redundancy behavior. It does not explain the condition tested here.

Question 337

A Junos enterprise team investigates this incident: A shared Ethernet segment loses its fast convergence properties after an ESI-LAG peer receives an inconsistent configuration. Which technical explanation most directly identifies the cause or design principle?

  1. EVPN Ethernet segment identifiers associate redundant attachments with one multihoming segment and support coordinated convergence.
  2. VNI and bridge-domain mapping determines tenant overlay segmentation; misaligned mappings can misdeliver or isolate traffic.
  3. VXLAN adds encapsulation overhead, so underlay MTU must accommodate the intended overlay frame size.
  4. EVPN route types carry different information: Type 1 Ethernet auto-discovery, Type 2 MAC/IP, Type 3 inclusive multicast.

Explanation

Correct Answer

A:

EVPN Ethernet segment identifiers associate redundant attachments with one multihoming segment and support coordinated convergence. The appropriate response is to align the intended ESI and supported LAG mode, then inspect relevant EVPN Type 1 and Type 4 routes.

Incorrect Answers

B:

“VNI and bridge-domain mapping determines tenant overlay segmentation; misaligned mappings can misdeliver or isolate traffic” belongs to a separate EVPN issue: a campus extension carries the right VXLAN outer header but directs frames to the wrong tenant bridge domain due to bad VNI mapping. It does not explain the condition tested here.

C:

“VXLAN adds encapsulation overhead, so underlay MTU must accommodate the intended overlay frame size” belongs to a separate EVPN issue: an EVPN-VXLAN frame is dropped over a path where the IP underlay MTU was sized only for unencapsulated Ethernet payloads. It does not explain the condition tested here.

D:

“EVPN route types carry different information: Type 1 Ethernet auto-discovery, Type 2 MAC/IP, Type 3 inclusive multicast” belongs to a separate EVPN issue: a fabric advertises Type 3 routes and claims this proves specific remote host MACs are reachable. It does not explain the condition tested here.

Question 338

A network change is required for the following specific situation: A provider-facing policy stops honoring a route-tag community after a new import policy changes the attached communities. Which corrective action is most appropriate?

  1. Examine both attributes in the received route detail and update the explicit routing policy rather than guessing.
  2. Read all relevant candidate attributes and apply policy consistent with intended tie-breaker precedence.
  3. Use precise route-filter match conditions and explicit rejection of unauthorized more-specific routes.
  4. Inspect received communities and export policy terms, then attach a tested community match and reject rule.

Explanation

Correct Answer

D:

Communities are policy metadata; tagging does not enforce advertisement restrictions unless a matching policy acts on it. Verify this by checking that a controlled route is withheld from prohibited peers while approved routes retain their expected advertisements.

Incorrect Answers

A:

“Examine both attributes in the received route detail and update the explicit routing policy rather than guessing” belongs to a separate Border Gateway Protocol (BGP) issue: a router prefers a longer AS path when a higher LOCAL_PREF makes that route win, surprising the transit team. It does not explain the condition tested here.

B:

“Read all relevant candidate attributes and apply policy consistent with intended tie-breaker precedence” belongs to a separate Border Gateway Protocol (BGP) issue: two equal LOCAL_PREF and AS-path candidates remain tied until MED influences the choice under the applicable comparison rules. It does not explain the condition tested here.

C:

“Use precise route-filter match conditions and explicit rejection of unauthorized more-specific routes” belongs to a separate Border Gateway Protocol (BGP) issue: an eBGP import policy unexpectedly accepts more-specific prefixes outside the approved customer allocation. It does not explain the condition tested here.

Question 339

A Junos enterprise team investigates this incident: An alternate upstream sends multicast on a path different from the router's route back to the source, causing RPF failures. Which technical explanation most directly identifies the cause or design principle?

  1. Anycast RP aims for a stable RP address with multiple nodes; consistent source discovery and RP coordination are essential to the chosen architecture.
  2. PIM sparse-mode ASM builds shared-tree state toward a reachable RP, and an incorrect RP mapping can prevent service.
  3. Source-specific multicast uses (S,G) membership semantics and generally avoids ASM rendezvous-point discovery for that flow.
  4. Reverse Path Forwarding checks whether multicast packets arrive on the interface selected toward the source or tree root.

Explanation

Correct Answer

D:

Reverse Path Forwarding checks whether multicast packets arrive on the interface selected toward the source or tree root. The appropriate response is to inspect multicast RPF state and the routing table used for source resolution, then correct the underlay or allowed RPF selection.

Incorrect Answers

A:

“Anycast RP aims for a stable RP address with multiple nodes; consistent source discovery and RP coordination are essential to the chosen architecture” belongs to a separate IP Multicast issue: an Anycast RP design uses two RP addresses that do not share the intended anycast identity, producing inconsistent joins. It does not explain the condition tested here.

B:

“PIM sparse-mode ASM builds shared-tree state toward a reachable RP, and an incorrect RP mapping can prevent service” belongs to a separate IP Multicast issue: a PIM sparse-mode receiver has an IGMP join but no multicast traffic because its upstream router cannot resolve the rendezvous point. It does not explain the condition tested here.

C:

“Source-specific multicast uses (S,G) membership semantics and generally avoids ASM rendezvous-point discovery for that flow” belongs to a separate IP Multicast issue: a video source is known and receivers support IGMPv3, but engineers configure ASM and an RP unnecessarily for the source-specific application. It does not explain the condition tested here.

Question 340

Which suggested shortcut would be especially unsafe for this exact situation? A provider handoff expects specific code-point markings yet a trunk rewrites every service class to default behavior.

  1. Review queue buffer tradeoffs and regression-test peak loads before tuning schedulers.
  2. Assume a correct internal forwarding class guarantees outgoing DSCP is preserved without rewrite policy.
  3. Test marking, PLP assignment and drop policy together rather than checking only DSCP fields.
  4. Validate classifier, scheduler map and interface association as a complete CoS chain.

Explanation

Correct Answer

B:

The tempting alternative fails because Junos egress rewrite rules map internal forwarding class and PLP back into supported packet header markings. The supported action is to apply the appropriate interface rewrite rule and verify the contract-specific egress code points.

Incorrect Answers

A:

That prevention measure relates to video gets dropped under congestion despite spare capacity because its queue has a too-small delay buffer.; it is not the unsafe shortcut described here.

C:

That prevention measure relates to a business wants out-of-profile marked traffic to drop earlier than in-profile traffic within one forwarding class.; it is not the unsafe shortcut described here.

D:

That prevention measure relates to a low-latency queue is correctly classified but voice delays because its egress scheduler map is absent from the trunk.; it is not the unsafe shortcut described here.

Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests

UP

SPECIAL OFFER: GET 10% OFF

This is ONE TIME OFFER

ExamSnap Discount Offer
Enter Your Email Address to Receive Your 10% Off Discount Code

A confirmation link will be sent to this email address to verify your login. *We value your privacy. We will not rent or sell your email address.

Download Free Demo of VCE Exam Simulator

Experience Avanset VCE Exam Simulator for yourself.

Simply submit your e-mail address below to get started with our interactive software demo of your free trial.

Free Demo Limits: In the demo version you will be able to access only first 5 questions from exam.