Juniper JN0-650 Exam Dumps, Practice Test Questions

100% Latest & Updated Juniper JN0-650 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!

Juniper JN0-650  Premium File
$54.99
$49.99

JN0-650 Premium File

  • Premium File: 107 Questions & Answers. Last update: Nov 7, 2026
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates

JN0-650 Premium File

Juniper JN0-650  Premium File
  • Premium File: 107 Questions & Answers. Last update: Nov 7, 2026
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates
$54.99
$49.99

Juniper JN0-650 Practice Test 35

Question 340

Which suggested shortcut would be especially unsafe for this exact situation? A provider handoff expects specific code-point markings yet a trunk rewrites every service class to default behavior.

  1. Review queue buffer tradeoffs and regression-test peak loads before tuning schedulers.
  2. Assume a correct internal forwarding class guarantees outgoing DSCP is preserved without rewrite policy.
  3. Test marking, PLP assignment and drop policy together rather than checking only DSCP fields.
  4. Validate classifier, scheduler map and interface association as a complete CoS chain.

Explanation

Correct Answer

B:

The tempting alternative fails because Junos egress rewrite rules map internal forwarding class and PLP back into supported packet header markings. The supported action is to apply the appropriate interface rewrite rule and verify the contract-specific egress code points.

Incorrect Answers

A:

That prevention measure relates to video gets dropped under congestion despite spare capacity because its queue has a too-small delay buffer.; it is not the unsafe shortcut described here.

C:

That prevention measure relates to a business wants out-of-profile marked traffic to drop earlier than in-profile traffic within one forwarding class.; it is not the unsafe shortcut described here.

D:

That prevention measure relates to a low-latency queue is correctly classified but voice delays because its egress scheduler map is absent from the trunk.; it is not the unsafe shortcut described here.

Question 341

Which suggested shortcut would be especially unsafe for this exact situation? A switch receives successful RADIUS Access-Accept but the user still lands in an unexpected VLAN because the dynamic assignment is not supported on that platform.

  1. Assume any RADIUS Access-Accept forces a requested dynamic VLAN on every Junos switch variant.
  2. Test captive-portal redirects, session expiry and post-login VLAN access in guest-network acceptance.
  3. Test multi-method paths including success, reject and timeout cases before deployment.
  4. Classify interactive and headless endpoint requirements before choosing the access method.

Explanation

Correct Answer

A:

The tempting alternative fails because authentication success and postauthentication VLAN/policy assignment are separate stages whose feature support may vary. The supported action is to check returned RADIUS attributes and supported platform software, then enforce a valid authorization assignment.

Incorrect Answers

B:

That prevention measure relates to a visitor portal redirects browser traffic but never releases the user to the approved network after authentication.; it is not the unsafe shortcut described here.

C:

That prevention measure relates to two authentication methods are enabled on a shared switch port but fallback ordering bypasses a successful 802.1X result.; it is not the unsafe shortcut described here.

D:

That prevention measure relates to a noninteractive sensor is trapped in captive-portal onboarding because operators selected browser authentication for all endpoints.; it is not the unsafe shortcut described here.

Question 342

Select THREE complementary corrective, verification, or preventive controls for this scenario: An IPv6 transit prefix is hidden because its next-hop address is absent from the correct IPv6 routing table.

  1. Disable BGP AS-loop safeguards globally to accept any route repeating the local AS.
  2. Include inet6-specific next-hop verification in dual-stack BGP peer checklists.
  3. Use MED changes alone as guaranteed overrides of a conflicting higher local preference.
  4. Check IPv6 next-hop reachability and inet6.0, then install a permitted IPv6 underlay route or correct next-hop policy.
  5. Point to a successful IPv4 traceroute as sufficient proof an IPv6 BGP next hop resolves.
  6. The IPv6 BGP route becomes eligible and forwards over an IPv6-resolvable next hop.

Explanation

Correct Answers

B:

Prevention of recurrence: BGP next-hop resolution must use the appropriate address family; IPv4 routes do not automatically resolve IPv6 next hops.

D:

Correction: BGP next-hop resolution must use the appropriate address family; IPv4 routes do not automatically resolve IPv6 next hops.

F:

Confirmation: Check IPv6 next-hop reachability and inet6.0, then install a permitted IPv6 underlay route or correct next-hop policy.

Incorrect Answers

A:

“Disable BGP AS-loop safeguards globally to accept any route repeating the local AS” is an unsafe response to a different problem: the local AS appears in a received external BGP AS_PATH and the route is rejected despite valid prefix reachability. It is not a valid fix here.

C:

“Use MED changes alone as guaranteed overrides of a conflicting higher local preference” is an unsafe response to a different problem: two iBGP exits offer equal reachable routes but the one with higher LOCAL_PREF is not the egress an operator expected. It is not a valid fix here.

E:

“Point to a successful IPv4 traceroute as sufficient proof an IPv6 BGP next hop resolves” does not address BGP next-hop resolution must use the appropriate address family; IPv4 routes do not automatically resolve IPv6 next hops.

Question 343

For this case, select TWO complementary measures or outcome checks that directly resolve the problem: A controlled one-source data feed requires group membership constrained by both source and group, not arbitrary senders.

  1. Replace all multicast group filters with a broad permit because at least one approved stream failed.
  2. Create an IGMP group entry alone and expect it to establish PIM adjacency between routers.
  3. Assume an ASM (*,G) join identifies and restricts a unique approved source by itself.
  4. Select an appropriate SSM group range and verify source-specific IGMPv3/PIM signaling on the supported platform.
  5. Receivers subscribed to the intended (S,G) get traffic while nonselected sources cannot join that flow.

Explanation

Correct Answers

D:

Select an appropriate SSM group range and verify source-specific IGMPv3/PIM signaling on the supported platform. This addresses the dependency that source-specific multicast uses (S,G) membership semantics and generally avoids ASM rendezvous-point discovery for that flow.

E:

Receivers subscribed to the intended (S,G) get traffic while nonselected sources cannot join that flow. The specific steps required are to select an appropriate SSM group range and verify source-specific IGMPv3/PIM signaling on the supported platform.

Incorrect Answers

A:

“Replace all multicast group filters with a broad permit because at least one approved stream failed” is an unsafe response to a different problem: an edge router uses a broad multicast filter that blocks valid collaboration groups alongside restricted lab streams. It is not a valid fix here.

B:

“Create an IGMP group entry alone and expect it to establish PIM adjacency between routers” is an unsafe response to a different problem: a PIM sparse-mode segment cannot maintain neighbor state because PIM is configured on the wrong routed interface. It is not a valid fix here.

C:

“Assume an ASM (*,G) join identifies and restricts a unique approved source by itself” does not address source-specific multicast uses (S,G) membership semantics and generally avoids ASM rendezvous-point discovery for that flow.

Question 344

Which suggested shortcut would be especially unsafe for this exact situation? A multicast source is active in a different PIM domain but the local ASM RP never learns the source mapping.

  1. Assume a working unicast BGP session automatically exchanges multicast MSDP source-active messages.
  2. Document whether multicast RPF uses inet.0 or inet.2 and verify after topology changes.
  3. Measure receiver interest and multicast forwarding state before scaling new one-to-many services.
  4. Document ASM/SSM selection and receiver-version prerequisites before multicast deployment.

Explanation

Correct Answer

A:

The tempting alternative fails because MSDP is used in applicable ASM inter-RP designs to exchange active-source information between rendezvous points. The supported action is to inspect MSDP peer state and source-active information, then configure the permitted peer relationships.

Incorrect Answers

B:

That prevention measure relates to a multicast team changes unicast routing yet an engineered multicast RPF table still points to an obsolete next hop.; it is not the unsafe shortcut described here.

C:

That prevention measure relates to a one-to-many lecture stream is configured as separate unicast connections and saturates a WAN link to a remote campus.; it is not the unsafe shortcut described here.

D:

That prevention measure relates to a video source is known and receivers support IGMPv3, but engineers configure ASM and an RP unnecessarily for the source-specific application.; it is not the unsafe shortcut described here.

Question 345

The team believes it has resolved this Junos issue: A switch receives successful RADIUS Access-Accept but the user still lands in an unexpected VLAN because the dynamic assignment is not supported on that platform. Which observation best verifies the specific intended result?

  1. The scanner authenticates through the approved method without any browser step, while unknown devices stay denied.
  2. Validation shows only supported options in use and the intended access-denial/fallback behavior.
  3. The known device reaches only permitted destinations and cannot reach employee or management resources.
  4. The switch reports an authorized session with the intended VLAN and access policy.

Explanation

Correct Answer

D:

The switch reports an authorized session with the intended VLAN and access policy. This checks the relevant result after check returned RADIUS attributes and supported platform software, then enforce a valid authorization assignment.

Incorrect Answers

A:

“The scanner authenticates through the approved method without any browser step, while unknown devices stay denied” belongs to a separate Layer 2 Authentication and Access Control issue: a noninteractive sensor is trapped in captive-portal onboarding because operators selected browser authentication for all endpoints. It does not explain the condition tested here.

B:

“Validation shows only supported options in use and the intended access-denial/fallback behavior” belongs to a separate Layer 2 Authentication and Access Control issue: an engineer copies legacy 802.1X fallback settings to a platform whose supported feature matrix excludes them. It does not explain the condition tested here.

C:

“The known device reaches only permitted destinations and cannot reach employee or management resources” belongs to a separate Layer 2 Authentication and Access Control issue: a legacy printer can join after MAC authentication yet is allowed to reach sensitive management segments. It does not explain the condition tested here.

Question 346

Which suggested shortcut would be especially unsafe for this exact situation? A phone's LLDP-negotiated power demand exceeds its access port's allocated PoE limit and it repeatedly restarts.

  1. Include LLDP-MED capabilities and network-policy TLVs in phone-vendor acceptance testing.
  2. Include end-to-end marking tests when deploying voice VLANs and new phone models.
  3. Assume a green Ethernet link light proves an endpoint has its required operating power.
  4. Synchronize switchport moves with maintained emergency location records.

Explanation

Correct Answer

C:

The tempting alternative fails because physical PoE delivery and negotiated device power requirements must match switch and endpoint capabilities. The supported action is to inspect PoE class, per-port priority and available chassis budget, and move to a supported powered port if needed.

Incorrect Answers

A:

That prevention measure relates to a newly deployed IP phone joins the data network because the switch does not advertise the intended voice VLAN through LLDP-MED.; it is not the unsafe shortcut described here.

B:

That prevention measure relates to a voice VLAN is configured correctly yet the switch's trust and rewrite policy fails to preserve the required phone traffic classification.; it is not the unsafe shortcut described here.

D:

That prevention measure relates to an IP phone uses the wrong location information for emergency response after a switch move.; it is not the unsafe shortcut described here.

Question 347

The team believes it has resolved this Junos issue: An access-area adjacency drops after one device is changed to shorter OSPF Hello timers but its peer keeps prior settings. Which observation best verifies the specific intended result?

  1. The remote inet6.0 table learns the intended loopback and reachability testing succeeds.
  2. The affected link passes OSPFv3 neighbor and IPv6 reachability checks rather than IPv4-only tests.
  3. The team explains the selected active route and verifies intended failover without disturbing OSPFv3 adjacency.
  4. Stable Hellos and Full neighbor state persist through repeated protocol interval checks.

Explanation

Correct Answer

D:

Stable Hellos and Full neighbor state persist through repeated protocol interval checks. This checks the relevant result after compare OSPF interface timers and align the two peers to approved Hello and dead values.

Incorrect Answers

A:

“The remote inet6.0 table learns the intended loopback and reachability testing succeeds” belongs to a separate Interior Gateway Protocols (IGPs) issue: OSPFv3 peering comes up but the desired IPv6 loopback is not in the routing database after a rollout. It does not explain the condition tested here.

B:

“The affected link passes OSPFv3 neighbor and IPv6 reachability checks rather than IPv4-only tests” belongs to a separate Interior Gateway Protocols (IGPs) issue: an OSPFv3 adjacency on a dual-stack campus changes state because engineers treat IPv4 interface reachability as proof of IPv6 control-plane health. It does not explain the condition tested here.

C:

“The team explains the selected active route and verifies intended failover without disturbing OSPFv3 adjacency” belongs to a separate Interior Gateway Protocols (IGPs) issue: a team wrongly concludes OSPFv3 failed when inet6.0 shows a static route active and the OSPFv3 candidate inactive. It does not explain the condition tested here.

Question 348

Which suggested shortcut would be especially unsafe for this exact situation? A financial multicast feed intended for one campus crosses the WAN because no boundary controls are configured.

  1. Document whether multicast RPF uses inet.0 or inet.2 and verify after topology changes.
  2. Use a unique group name as the only security boundary and rely on routers to infer its scope.
  3. Review interdomain source-advertisement scope and MSDP peer availability for ASM deployments.
  4. Test RP failover and synchronization behavior before expanding Anycast RP.

Explanation

Correct Answer

B:

The tempting alternative fails because multicast administrative scoping must restrict eligible groups and outgoing boundaries; group addresses alone do not impose all policy. The supported action is to configure group-aware multicast routing policy and boundary filters at intended exits, then verify forwarding.

Incorrect Answers

A:

That prevention measure relates to a multicast team changes unicast routing yet an engineered multicast RPF table still points to an obsolete next hop.; it is not the unsafe shortcut described here.

C:

That prevention measure relates to a multicast source is active in a different PIM domain but the local ASM RP never learns the source mapping.; it is not the unsafe shortcut described here.

D:

That prevention measure relates to an Anycast RP design uses two RP addresses that do not share the intended anycast identity, producing inconsistent joins.; it is not the unsafe shortcut described here.

Question 349

To prevent recurrence of this precise networking failure, which practice should be adopted? A RED drop profile is applied too aggressively and drops packets even under moderate load.

  1. Test classifier attachment and DSCP mappings on every access and aggregation ingress template.
  2. Plan buffer and shaping rates against provider handoff capacity and expected burst size.
  3. Keep queue drop-profile acceptance tests and monitor production congestion before broad rollout.
  4. Document trusted-marking boundaries and test both matched and unmatched multifield traffic.

Explanation

Correct Answer

C:

Keep queue drop-profile acceptance tests and monitor production congestion before broad rollout. This guards against drop profiles and weighted random early detection influence probabilistic discard thresholds as queue fill rises.

Incorrect Answers

A:

“Test classifier attachment and DSCP mappings on every access and aggregation ingress template” belongs to a separate Class of Service (CoS) issue: a campus uplink transmits marked video as ordinary data because no behavior-aggregate classifier is attached at ingress. It does not explain the condition tested here.

B:

“Plan buffer and shaping rates against provider handoff capacity and expected burst size” belongs to a separate Class of Service (CoS) issue: a branch link should pace scheduled traffic to a slower uplink yet the team only drops excess packets abruptly. It does not explain the condition tested here.

D:

“Document trusted-marking boundaries and test both matched and unmatched multifield traffic” belongs to a separate Class of Service (CoS) issue: a security function needs to classify a subset of traffic by source and destination criteria rather than trusted external markings. It does not explain the condition tested here.

Question 350

The team believes it has resolved this Junos issue: An engineer incorrectly assumes a lower MED overrides a larger LOCAL_PREF, when both transit candidates are eligible. Which observation best verifies the specific intended result?

  1. The advertised set matches the documented inactive-BGP exception without changing local forwarding selection.
  2. The unauthorized route is rejected while intended export cases still match the proper terms.
  3. The chosen best path follows the documented attribute ordering rather than a single observed MED value.
  4. The previously hidden BGP prefix resolves its next hop and becomes an eligible route.

Explanation

Correct Answer

C:

The chosen best path follows the documented attribute ordering rather than a single observed MED value. This checks the relevant result after read all relevant candidate attributes and apply policy consistent with intended tie-breaker precedence.

Incorrect Answers

A:

“The advertised set matches the documented inactive-BGP exception without changing local forwarding selection” belongs to a separate Border Gateway Protocol (BGP) issue: an engineer adds advertise-inactive and downstream peers begin receiving a BGP route that loses to an OSPF route locally. It does not explain the condition tested here.

B:

“The unauthorized route is rejected while intended export cases still match the proper terms” belongs to a separate Border Gateway Protocol (BGP) issue: a BGP export configuration has a broad first match so a specific downstream deny never evaluates the target prefix. It does not explain the condition tested here.

D:

“The previously hidden BGP prefix resolves its next hop and becomes an eligible route” belongs to a separate Border Gateway Protocol (BGP) issue: a new IPv4 BGP prefix has a valid AS path but cannot become active after the IGP stops carrying its next-hop address. It does not explain the condition tested here.

Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests

UP

SPECIAL OFFER: GET 10% OFF

This is ONE TIME OFFER

ExamSnap Discount Offer
Enter Your Email Address to Receive Your 10% Off Discount Code

A confirmation link will be sent to this email address to verify your login. *We value your privacy. We will not rent or sell your email address.

Download Free Demo of VCE Exam Simulator

Experience Avanset VCE Exam Simulator for yourself.

Simply submit your e-mail address below to get started with our interactive software demo of your free trial.

Free Demo Limits: In the demo version you will be able to access only first 5 questions from exam.