100% Latest & Updated Juniper JN0-650 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!
Question 490
To prevent recurrence of this precise networking failure, which practice should be adopted? A distribution node learns connected subnets but never sends Hello packets on its OSPF transit port due to passive-interface policy.
- Test one allowed and one forbidden route against each export policy term before deployment.
- Classify loopbacks and user-facing links separately from peer links when applying passive templates.
- Keep IPv4 and IPv6 routing verification separate for dual-stack maintenance.
- Record both LSDB presence and local RIB installation in OSPF troubleshooting runbooks.
Explanation
Correct Answer
B:Classify loopbacks and user-facing links separately from peer links when applying passive templates. This guards against making a link passive suppresses OSPF adjacency formation even when its prefix remains eligible for advertisement.
Incorrect Answers
A:“Test one allowed and one forbidden route against each export policy term before deployment” belongs to a separate Interior Gateway Protocols (IGPs) issue: a branch default-route injection stops after a policy matches OSPF-learned routes instead of the intended local static. It does not explain the condition tested here.
C:“Keep IPv4 and IPv6 routing verification separate for dual-stack maintenance” belongs to a separate Interior Gateway Protocols (IGPs) issue: an OSPFv3 adjacency on a dual-stack campus changes state because engineers treat IPv4 interface reachability as proof of IPv6 control-plane health. It does not explain the condition tested here.
D:“Record both LSDB presence and local RIB installation in OSPF troubleshooting runbooks” belongs to a separate Interior Gateway Protocols (IGPs) issue: a core node shows a missing route while remote LSDBs include the corresponding external LSA after a local policy change. It does not explain the condition tested here.
Question 491
The team believes it has resolved this Junos issue: A desk phone sends tagged voice traffic, but the switchport permits only the untagged data VLAN. Which observation best verifies the specific intended result?
- The phone receives voice service on its tagged VLAN and the PC remains on its separate data VLAN.
- The device stays powered during peak consumption and Junos reports no power-denial events.
- Packet and operational views show the required LLDP-MED telephony TLVs at the correct interface.
- The critical phone remains powered during a simulated shortage while lower-priority devices are shed as designed.
Explanation
Correct Answer
A:The phone receives voice service on its tagged VLAN and the PC remains on its separate data VLAN. This checks the relevant result after configure an approved voice VLAN on the port while keeping the PC data VLAN constrained.
Incorrect Answers
B:“The device stays powered during peak consumption and Junos reports no power-denial events” belongs to a separate IP Telephony Features issue: a phone's LLDP-negotiated power demand exceeds its access port's allocated PoE limit and it repeatedly restarts. It does not explain the condition tested here.
C:“Packet and operational views show the required LLDP-MED telephony TLVs at the correct interface” belongs to a separate IP Telephony Features issue: a powered endpoint detects a Junos switch but fails to negotiate voice prioritization because only ordinary LLDP is enabled. It does not explain the condition tested here.
D:“The critical phone remains powered during a simulated shortage while lower-priority devices are shed as designed” belongs to a separate IP Telephony Features issue: a switch assigns equal PoE power priority to every port and disconnects an emergency phone before low-priority signage during a power shortage. It does not explain the condition tested here.
Question 492
A Junos enterprise team investigates this incident: A WAN customer requires smooth outbound transmission but an ingress drop policer creates unnecessary burst loss. Which technical explanation most directly identifies the cause or design principle?
- Junos egress rewrite rules map internal forwarding class and PLP back into supported packet header markings.
- Shaping buffers and schedules outgoing traffic to a rate, unlike policing which marks or discards traffic exceeding a contract.
- Forwarding classes select output queues; an incorrect class-to-queue association can cause head-of-line delays.
- Packet loss priority differentiates drop susceptibility within a forwarding class and works with the configured queue/drop behavior.
Explanation
Correct Answer
B:Shaping buffers and schedules outgoing traffic to a rate, unlike policing which marks or discards traffic exceeding a contract. The appropriate response is to configure supported egress shaping at the bottleneck and verify throughput and queue behavior.
Incorrect Answers
A:“Junos egress rewrite rules map internal forwarding class and PLP back into supported packet header markings” belongs to a separate Class of Service (CoS) issue: a provider handoff expects specific code-point markings yet a trunk rewrites every service class to default behavior. It does not explain the condition tested here.
C:“Forwarding classes select output queues; an incorrect class-to-queue association can cause head-of-line delays” belongs to a separate Class of Service (CoS) issue: a forwarding-class configuration sends critical routing packets to a queue used for bulk backups and adjacency stability degrades under load. It does not explain the condition tested here.
D:“Packet loss priority differentiates drop susceptibility within a forwarding class and works with the configured queue/drop behavior” belongs to a separate Class of Service (CoS) issue: packets with two different drop precedence values are treated as equally discardable during congestion. It does not explain the condition tested here.
Question 493
Which suggested shortcut would be especially unsafe for this exact situation? An access switch is moved to Junos OS Evolved but the team assumes every earlier guest-VLAN feature still exists on L2 802.1X interfaces.
- Assume every 802.1X feature shown in an EX switch guide is identically supported in all Junos OS Evolved interfaces.
- Require inventory ownership and anomaly monitoring for MAC RADIUS exceptions.
- Separate EAP silence, reject and timeout counters in authentication operational monitoring.
- Include downstream device count and authentication method in desk-port templates.
Explanation
Correct Answer
A:The tempting alternative fails because 802.1X guest and fallback capabilities are platform and Junos variant specific; unsupported features must not be assumed. The supported action is to consult the target release's official 802.1X support matrix and adapt the authorization design to supported methods.
Incorrect Answers
B:That prevention measure relates to a MAC RADIUS device changes its network adapter and can no longer authenticate because its registered identifier is stale.; it is not the unsafe shortcut described here.
C:That prevention measure relates to a switch logs EAP timeout while the endpoint has no 802.1X supplicant, yet the operator rotates valid RADIUS passwords repeatedly.; it is not the unsafe shortcut described here.
D:That prevention measure relates to a telephony desk requires multiple authenticated identities while the switch policy allows only one active supplicant.; it is not the unsafe shortcut described here.
Question 494
A Junos enterprise team investigates this incident: An OSPF export term filters routes based on the wrong protocol, so an intended static default is not originated. Which technical explanation most directly identifies the cause or design principle?
- IPv4 packet reachability does not independently validate OSPFv3's IPv6 link-local neighbor exchanges.
- DR/BDR elections on OSPF broadcast networks affect LSA exchange and can be influenced by priority.
- OSPF identifies routers by unique router ID; collisions can destabilize LSDB and adjacency behavior.
- Routing-policy match criteria must align with the source route type and the intended OSPF export behavior.
Explanation
Correct Answer
D:Routing-policy match criteria must align with the source route type and the intended OSPF export behavior. The appropriate response is to inspect the active local default and export term conditions; match only the authorized static default source.
Incorrect Answers
A:“IPv4 packet reachability does not independently validate OSPFv3's IPv6 link-local neighbor exchanges” belongs to a separate Interior Gateway Protocols (IGPs) issue: an IPv6 branch outage is misdiagnosed using only IPv4 pings, despite OSPFv3 neighbors using IPv6 link-local messaging. It does not explain the condition tested here.
B:“DR/BDR elections on OSPF broadcast networks affect LSA exchange and can be influenced by priority” belongs to a separate Interior Gateway Protocols (IGPs) issue: an aggregation broadcast VLAN has a DR/BDR placement that conflicts with the approved design after a maintenance reboot. It does not explain the condition tested here.
C:“OSPF identifies routers by unique router ID; collisions can destabilize LSDB and adjacency behavior” belongs to a separate Interior Gateway Protocols (IGPs) issue: two newly deployed distribution switches report identical OSPF router IDs, causing inconsistent LSAs in the area. It does not explain the condition tested here.
Question 495
The team believes it has resolved this Junos issue: Two adjacent MSTP switches show different region digests after one has a different VLAN-to-instance map. Which observation best verifies the specific intended result?
- Community members can communicate as intended while cross-community access remains blocked.
- Isolated clients reach the shared service but cannot communicate laterally with other isolated clients.
- The VLAN registration propagates to the intended downstream trunk and reaches its member ports.
- Both switches show compatible region membership and intended instance root/port roles.
Explanation
Correct Answer
D:Both switches show compatible region membership and intended instance root/port roles. This checks the relevant result after compare complete region configuration on the peers and restore the approved shared MSTP region values.
Incorrect Answers
A:“Community members can communicate as intended while cross-community access remains blocked” belongs to a separate Ethernet Switching and Spanning Tree issue: members of the same trusted workgroup are accidentally placed in isolated rather than community PVLAN ports and lose peer communication. It does not explain the condition tested here.
B:“Isolated clients reach the shared service but cannot communicate laterally with other isolated clients” belongs to a separate Ethernet Switching and Spanning Tree issue: a private VLAN isolated endpoint reaches the local gateway but cannot access a peer service that should be shared via a permitted promiscuous port. It does not explain the condition tested here.
C:“The VLAN registration propagates to the intended downstream trunk and reaches its member ports” belongs to a separate Ethernet Switching and Spanning Tree issue: a new switch automatically discovers VLAN registrations on one trunk, but an intermediate trunk lacks MVRP participation and blocks the VLAN. It does not explain the condition tested here.
Question 496
The team believes it has resolved this Junos issue: The local AS appears in a received external BGP AS_PATH and the route is rejected despite valid prefix reachability. Which observation best verifies the specific intended result?
- Allowed customer prefixes are received while unauthorized longer prefixes are absent from accepted routes.
- Positive and negative prefix tests traverse the expected policy terms and produce approved import/export outcomes.
- The downstream client learns approved prefixes and cluster-loop checks remain operational.
- The route is accepted only after the AS-path loop is removed, with stable forwarding.
Explanation
Correct Answer
D:The route is accepted only after the AS-path loop is removed, with stable forwarding. This checks the relevant result after check the advertised AS sequence and correct the peering or routing design instead of bypassing loop checks.
Incorrect Answers
A:“Allowed customer prefixes are received while unauthorized longer prefixes are absent from accepted routes” belongs to a separate Border Gateway Protocol (BGP) issue: a prefix-list matches a broad aggregate but accepts unwanted subprefixes from a new external neighbor. It does not explain the condition tested here.
B:“Positive and negative prefix tests traverse the expected policy terms and produce approved import/export outcomes” belongs to a separate Border Gateway Protocol (BGP) issue: a route policy lacks an explicit intended default action, and unmatched BGP prefixes behave differently than planned. It does not explain the condition tested here.
C:“The downstream client learns approved prefixes and cluster-loop checks remain operational” belongs to a separate Border Gateway Protocol (BGP) issue: a route-reflector topology loses an iBGP-advertised prefix because clients are not configured under the intended reflector cluster. It does not explain the condition tested here.
Question 497
A Junos enterprise team investigates this incident: An OSPF neighbor remains Down because the routed transit interface was left passive after a site template rollout. Which technical explanation most directly identifies the cause or design principle?
- Routing-policy match criteria must align with the source route type and the intended OSPF export behavior.
- Protocol route advertisement and active-route selection are separate; lower route preference can select a non-OSPF candidate.
- An established OSPFv3 neighbor does not prove every desired IPv6 interface prefix is included in the protocol topology.
- Making a link passive suppresses OSPF adjacency formation even when its prefix remains eligible for advertisement.
Explanation
Correct Answer
D:Making a link passive suppresses OSPF adjacency formation even when its prefix remains eligible for advertisement. The appropriate response is to remove passive behavior only from the approved router-to-router transit link and check Hello and neighbor states.
Incorrect Answers
A:“Routing-policy match criteria must align with the source route type and the intended OSPF export behavior” belongs to a separate Interior Gateway Protocols (IGPs) issue: an OSPF export term filters routes based on the wrong protocol, so an intended static default is not originated. It does not explain the condition tested here.
B:“Protocol route advertisement and active-route selection are separate; lower route preference can select a non-OSPF candidate” belongs to a separate Interior Gateway Protocols (IGPs) issue: an IPv6 route learned through OSPFv3 is absent from the forwarding table because a more preferred static route covers the same prefix. It does not explain the condition tested here.
C:“An established OSPFv3 neighbor does not prove every desired IPv6 interface prefix is included in the protocol topology” belongs to a separate Interior Gateway Protocols (IGPs) issue: OSPFv3 peering comes up but the desired IPv6 loopback is not in the routing database after a rollout. It does not explain the condition tested here.
Question 498
A network change is required for the following specific situation: A large campus places hundreds of VLANs in separate spanning-tree instances and reaches scale or CPU limits. Which corrective action is most appropriate?
- Configure supported L2PT for the required control protocols and verify provider-edge handling.
- Create an approved MSTP region and VLAN-to-instance mapping, then verify root and port role behavior.
- Inspect match conditions and attachment point, then change the approved filter-based VLAN steering rule.
- Map the trusted endpoints to the proper community secondary VLAN and keep other groups segregated.
Explanation
Correct Answer
B:MSTP maps VLANs into a smaller set of spanning-tree instances, providing scalable per-group path control. Verify this by checking that the required VLAN groups follow their designated MSTI paths without per-VLAN instance explosion.
Incorrect Answers
A:“Configure supported L2PT for the required control protocols and verify provider-edge handling” belongs to a separate Ethernet Switching and Spanning Tree issue: an 802.1Q trunk carries customer data through a provider Ethernet segment but fails to forward the required spanning-tree control frames transparently. It does not explain the condition tested here.
C:“Inspect match conditions and attachment point, then change the approved filter-based VLAN steering rule” belongs to a separate Ethernet Switching and Spanning Tree issue: a policy-based VLAN filter moves matching device traffic to a quarantine VLAN but a rule fails to match the intended MAC or packet fields. It does not explain the condition tested here.
D:“Map the trusted endpoints to the proper community secondary VLAN and keep other groups segregated” belongs to a separate Ethernet Switching and Spanning Tree issue: members of the same trusted workgroup are accidentally placed in isolated rather than community PVLAN ports and lose peer communication. It does not explain the condition tested here.
Question 499
Select THREE complementary corrective, verification, or preventive controls for this scenario: A lab uses one primary VLAN for many tenants but isolated access ports can still exchange Layer 2 frames after a misconfiguration.
- Inspect primary and secondary private VLAN roles and port membership; restore approved isolated/community mappings.
- Two isolated tenant ports cannot reach each other but can reach the permitted gateway uplink.
- Treat ordinary VLAN membership as equivalent to isolation between every port inside that VLAN.
- Remove customer inner VLAN tags at entry and assume overlapping customer IDs remain isolated.
- Adjust Ethernet cable speed and expect different MSTP region digests to converge automatically.
- Test private-port isolation and uplink reachability after access topology changes.
Explanation
Correct Answers
A:Correction: Private VLAN isolated ports are designed to limit lateral L2 communication while still reaching the permitted promiscuous uplink.
B:Confirmation: Inspect primary and secondary private VLAN roles and port membership; restore approved isolated/community mappings.
F:Prevention of recurrence: Private VLAN isolated ports are designed to limit lateral L2 communication while still reaching the permitted promiscuous uplink.
Incorrect Answers
C:“Treat ordinary VLAN membership as equivalent to isolation between every port inside that VLAN” does not address private VLAN isolated ports are designed to limit lateral L2 communication while still reaching the permitted promiscuous uplink.
D:“Remove customer inner VLAN tags at entry and assume overlapping customer IDs remain isolated” is an unsafe response to a different problem: a service provider must carry multiple customer VLAN IDs transparently over one metro Ethernet handoff. It is not a valid fix here.
E:“Adjust Ethernet cable speed and expect different MSTP region digests to converge automatically” is an unsafe response to a different problem: two adjacent MSTP switches show different region digests after one has a different VLAN-to-instance map. It is not a valid fix here.
Question 500
Select THREE complementary corrective, verification, or preventive controls for this scenario: A branch uplink uses area 0.0.0.6 on one router and area 0.0.0.9 on its peer after a template copy.
- Validate per-interface OSPF area assignments from an approved topology matrix before commit.
- OSPF neighbor state reaches Full and the expected area LSDB receives the neighbor advertisements.
- Change only router IDs while leaving the mismatched interface areas intact.
- Add a catch-all accept at the end of the policy to bypass the source-type error.
- Restart the entire OSPFv2 process and assume this fixes a missing OSPFv3 loopback.
- Compare configured interface areas with the approved topology and put both interfaces in the intended matching area.
Explanation
Correct Answers
A:Prevention of recurrence: OSPF neighbors must agree on the area context to form adjacency on the common link.
B:Confirmation: Compare configured interface areas with the approved topology and put both interfaces in the intended matching area.
F:Correction: OSPF neighbors must agree on the area context to form adjacency on the common link.
Incorrect Answers
C:“Change only router IDs while leaving the mismatched interface areas intact” does not address OSPF neighbors must agree on the area context to form adjacency on the common link.
D:“Add a catch-all accept at the end of the policy to bypass the source-type error” is an unsafe response to a different problem: an OSPF export term filters routes based on the wrong protocol, so an intended static default is not originated. It is not a valid fix here.
E:“Restart the entire OSPFv2 process and assume this fixes a missing OSPFv3 loopback” is an unsafe response to a different problem: OSPFv3 peering comes up but the desired IPv6 loopback is not in the routing database after a rollout. It is not a valid fix here.
Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests