Juniper JN0-650 Exam Dumps, Practice Test Questions

100% Latest & Updated Juniper JN0-650 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!

Juniper JN0-650  Premium File
$54.99
$49.99

JN0-650 Premium File

  • Premium File: 107 Questions & Answers. Last update: Nov 7, 2026
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates

JN0-650 Premium File

Juniper JN0-650  Premium File
  • Premium File: 107 Questions & Answers. Last update: Nov 7, 2026
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates
$54.99
$49.99

Juniper JN0-650 Practice Test 52

Question 510

To prevent recurrence of this precise networking failure, which practice should be adopted? An ingress classification filter for one terminal type inadvertently redirects other hosts using the same uplink.

  1. Version-control MSTP name, revision and VLAN mapping as one change unit.
  2. Check policy coverage and unintended-match cases before activating filter-based steering.
  3. Scope and monitor tunneled L2 control protocols to prevent control-plane abuse.
  4. Audit edge classifications and apply appropriate BPDU protection on true client-facing ports.

Explanation

Correct Answer

B:

Check policy coverage and unintended-match cases before activating filter-based steering. This guards against overbroad match conditions can cause unauthorized VLAN steering and affect both security and reachability.

Incorrect Answers

A:

“Version-control MSTP name, revision and VLAN mapping as one change unit” belongs to a separate Ethernet Switching and Spanning Tree issue: two adjacent MSTP switches show different region digests after one has a different VLAN-to-instance map. It does not explain the condition tested here.

C:

“Scope and monitor tunneled L2 control protocols to prevent control-plane abuse” belongs to a separate Ethernet Switching and Spanning Tree issue: an 802.1Q trunk carries customer data through a provider Ethernet segment but fails to forward the required spanning-tree control frames transparently. It does not explain the condition tested here.

D:

“Audit edge classifications and apply appropriate BPDU protection on true client-facing ports” belongs to a separate Ethernet Switching and Spanning Tree issue: a redundant L2 topology creates a broadcast storm after an edge port connected to another switch is treated as an endpoint. It does not explain the condition tested here.

Question 511

To prevent recurrence of this precise networking failure, which practice should be adopted? A campus uplink transmits marked video as ordinary data because no behavior-aggregate classifier is attached at ingress.

  1. Test both average-rate enforcement and microburst tolerance for new policer profiles.
  2. Test classifier attachment and DSCP mappings on every access and aggregation ingress template.
  3. Plan buffer and shaping rates against provider handoff capacity and expected burst size.
  4. Validate classifier, scheduler map and interface association as a complete CoS chain.

Explanation

Correct Answer

B:

Test classifier attachment and DSCP mappings on every access and aggregation ingress template. This guards against Junos ingress classifiers map packet header code points to forwarding classes and packet loss priority, subject to interface attachment.

Incorrect Answers

A:

“Test both average-rate enforcement and microburst tolerance for new policer profiles” belongs to a separate Class of Service (CoS) issue: an uplink meets long-term bandwidth policy but legitimate short bursts exceed the token-bucket allowance. It does not explain the condition tested here.

C:

“Plan buffer and shaping rates against provider handoff capacity and expected burst size” belongs to a separate Class of Service (CoS) issue: a branch link should pace scheduled traffic to a slower uplink yet the team only drops excess packets abruptly. It does not explain the condition tested here.

D:

“Validate classifier, scheduler map and interface association as a complete CoS chain” belongs to a separate Class of Service (CoS) issue: a campus has configured forwarding classes and schedulers but one uplink carries all traffic through default service because association is missing. It does not explain the condition tested here.

Question 512

The team believes it has resolved this Junos issue: An ASM video distribution has valid listener memberships yet PIM joins never converge toward the configured RP. Which observation best verifies the specific intended result?

  1. Receivers subscribed to the intended (S,G) get traffic while nonselected sources cannot join that flow.
  2. PIM joins build the intended shared tree and the requested group begins forwarding to subscribers.
  3. The specified groups remain within the approved scope while unrelated enterprise multicast flows continue.
  4. The selected upstream RPF neighbor and packet arrival interface agree, restoring intended multicast flow.

Explanation

Correct Answer

B:

PIM joins build the intended shared tree and the requested group begins forwarding to subscribers. This checks the relevant result after check group-to-RP mapping and RP reachability, then repair the RP discovery or explicit mapping.

Incorrect Answers

A:

“Receivers subscribed to the intended (S,G) get traffic while nonselected sources cannot join that flow” belongs to a separate IP Multicast issue: a controlled one-source data feed requires group membership constrained by both source and group, not arbitrary senders. It does not explain the condition tested here.

C:

“The specified groups remain within the approved scope while unrelated enterprise multicast flows continue” belongs to a separate IP Multicast issue: a laboratory's multicast test group leaks to the corporate backbone despite a requirement to keep it within the lab. It does not explain the condition tested here.

D:

“The selected upstream RPF neighbor and packet arrival interface agree, restoring intended multicast flow” belongs to a separate IP Multicast issue: a multicast team changes unicast routing yet an engineered multicast RPF table still points to an obsolete next hop. It does not explain the condition tested here.

Question 513

Which suggested shortcut would be especially unsafe for this exact situation? A forwarding-class configuration sends critical routing packets to a queue used for bulk backups and adjacency stability degrades under load.

  1. Test ingress classification separately from egress rewrite at every trust boundary.
  2. Assume more queues automatically improve latency even if control traffic remains mapped to a congested queue.
  3. Establish congestion thresholds and monitor starvation as part of queue-priority design.
  4. Test both average-rate enforcement and microburst tolerance for new policer profiles.

Explanation

Correct Answer

B:

The tempting alternative fails because forwarding classes select output queues; an incorrect class-to-queue association can cause head-of-line delays. The supported action is to review the forwarding class and queue map for control and data traffic and apply the intended assignments.

Incorrect Answers

A:

That prevention measure relates to a boundary router classifies EF voice traffic correctly but sends outbound DSCP zero, so downstream devices undo priority handling.; it is not the unsafe shortcut described here.

C:

That prevention measure relates to a finance video queue configured as low priority cannot meet latency targets because competing transfers share the same service policy.; it is not the unsafe shortcut described here.

D:

That prevention measure relates to a traffic policer drops small microbursts despite an acceptable average rate because its configured burst size is too tight.; it is not the unsafe shortcut described here.

Question 514

The team believes it has resolved this Junos issue: Two iBGP exits offer equal reachable routes but the one with higher LOCAL_PREF is not the egress an operator expected. Which observation best verifies the specific intended result?

  1. The previously hidden BGP prefix resolves its next hop and becomes an eligible route.
  2. The downstream client learns approved prefixes and cluster-loop checks remain operational.
  3. The desired received prefix is accepted and active while intentionally blocked prefixes stay rejected.
  4. The selected BGP route reflects the intended higher LOCAL_PREF, and traceroute follows the approved exit.

Explanation

Correct Answer

D:

The selected BGP route reflects the intended higher LOCAL_PREF, and traceroute follows the approved exit. This checks the relevant result after inspect per-route local preferences and import policy; set the intended exit's LOCAL_PREF consistently.

Incorrect Answers

A:

“The previously hidden BGP prefix resolves its next hop and becomes an eligible route” belongs to a separate Border Gateway Protocol (BGP) issue: an iBGP route is received from a reflector but hidden because its third-party next hop is unreachable in inet.0. It does not explain the condition tested here.

B:

“The downstream client learns approved prefixes and cluster-loop checks remain operational” belongs to a separate Border Gateway Protocol (BGP) issue: a full-mesh iBGP design is converted to route reflection but one peer is treated as an ordinary nonclient and route propagation fails. It does not explain the condition tested here.

C:

“The desired received prefix is accepted and active while intentionally blocked prefixes stay rejected” belongs to a separate Border Gateway Protocol (BGP) issue: a Junos route is hidden by import policy, but the team troubleshoots only local physical interfaces. It does not explain the condition tested here.

Question 515

Select THREE complementary corrective, verification, or preventive controls for this scenario: A streaming application expects a source-specific group to accept traffic from any origin, contrary to its (S,G) subscription.

  1. Turn off all RPF checking to accept duplicate or looping multicast packets from arbitrary links.
  2. Treat SSM group membership as source-agnostic and subscribe to the group without source information.
  3. Only the specified source delivers data to receivers of the chosen SSM group.
  4. Assume inet.0 always controls PIM RPF even when an alternate multicast RPF table is configured.
  5. Update receiver memberships to use the approved source and group, and validate end-to-end (S,G) trees.
  6. Include source address changes in SSM subscription-management procedures.

Explanation

Correct Answers

C:

Confirmation: Update receiver memberships to use the approved source and group, and validate end-to-end (S,G) trees.

E:

Correction: ASM and SSM use different membership and source-selection semantics; an SSM receiver must identify its desired sender.

F:

Prevention of recurrence: ASM and SSM use different membership and source-selection semantics; an SSM receiver must identify its desired sender.

Incorrect Answers

A:

“Turn off all RPF checking to accept duplicate or looping multicast packets from arbitrary links” is an unsafe response to a different problem: multicast packets arrive on the wrong uplink after unicast routing changes and are dropped by the campus core. It is not a valid fix here.

B:

“Treat SSM group membership as source-agnostic and subscribe to the group without source information” does not address ASM and SSM use different membership and source-selection semantics; an SSM receiver must identify its desired sender.

D:

“Assume inet.0 always controls PIM RPF even when an alternate multicast RPF table is configured” is an unsafe response to a different problem: a campus uses a separate inet.2 multicast RPF table and investigators inspect only inet.0, overlooking a stale source route. It is not a valid fix here.

Question 516

To prevent recurrence of this precise networking failure, which practice should be adopted? An IPv6 BGP peer receives a route with an unreachable IPv6 next hop despite an otherwise valid inet6 unicast advertisement.

  1. Maintain expected BGP attribute decisions for every primary/secondary transit policy.
  2. Include inet6-specific next-hop verification in dual-stack BGP peer checklists.
  3. Use multivariable path-selection lab tests before changing MED-based policy.
  4. Track every BGP advertise-inactive exception and test cross-protocol route selection.

Explanation

Correct Answer

B:

Include inet6-specific next-hop verification in dual-stack BGP peer checklists. This guards against BGP next-hop resolution must use the appropriate address family; IPv4 routes do not automatically resolve IPv6 next hops.

Incorrect Answers

A:

“Maintain expected BGP attribute decisions for every primary/secondary transit policy” belongs to a separate Border Gateway Protocol (BGP) issue: a branch dual-transit design sees the higher-preference provider route win even though its AS path has more hops. It does not explain the condition tested here.

C:

“Use multivariable path-selection lab tests before changing MED-based policy” belongs to a separate Border Gateway Protocol (BGP) issue: two equal LOCAL_PREF and AS-path candidates remain tied until MED influences the choice under the applicable comparison rules. It does not explain the condition tested here.

D:

“Track every BGP advertise-inactive exception and test cross-protocol route selection” belongs to a separate Border Gateway Protocol (BGP) issue: an engineer adds advertise-inactive and downstream peers begin receiving a BGP route that loses to an OSPF route locally. It does not explain the condition tested here.

Question 517

For this case, select TWO complementary measures or outcome checks that directly resolve the problem: A dynamic VLAN is removed from one edge but stale MVRP registration keeps an unused VLAN active downstream.

  1. Delete all VLANs from every trunk to clear one stale MVRP registration.
  2. Create an independent VSTP instance for every VLAN without checking platform scaling limits.
  3. Inspect registration state and remove stale VLAN membership while preserving necessary registrations.
  4. The retired VLAN disappears from unintended trunks and valid registered VLANs remain reachable.
  5. Disable private VLAN restrictions entirely as a shortcut to reach a single shared uplink service.

Explanation

Correct Answers

C:

Inspect registration state and remove stale VLAN membership while preserving necessary registrations. This addresses the dependency that MVRP registrations can persist where membership state or participation has not been updated consistently.

D:

The retired VLAN disappears from unintended trunks and valid registered VLANs remain reachable. The specific steps required are to inspect registration state and remove stale VLAN membership while preserving necessary registrations.

Incorrect Answers

A:

“Delete all VLANs from every trunk to clear one stale MVRP registration” does not address MVRP registrations can persist where membership state or participation has not been updated consistently.

B:

“Create an independent VSTP instance for every VLAN without checking platform scaling limits” is an unsafe response to a different problem: a network uses one VLAN-wide topology but wants two forwarding trees for different groups without an instance for every VLAN. It is not a valid fix here.

E:

“Disable private VLAN restrictions entirely as a shortcut to reach a single shared uplink service” is an unsafe response to a different problem: a building's private VLAN design inadvertently limits tenant access to a shared printer uplink while direct tenant communication is supposed to stay blocked. It is not a valid fix here.

Question 518

For this case, select TWO complementary measures or outcome checks that directly resolve the problem: An application needs priority regardless of incoming DSCP, but an interface uses only a header-based classifier.

  1. Only traffic meeting the defined match receives the intended queue and packet loss priority.
  2. Trust arbitrary user DSCP markings as proof every packet belongs in the high-priority class.
  3. Assume a correct internal forwarding class guarantees outgoing DSCP is preserved without rewrite policy.
  4. Mark every forwarding class strict-high with no attention to starvation or bounded resource sharing.
  5. Use a permitted firewall or multifield classifier matching the approved traffic fields and assign its forwarding class.

Explanation

Correct Answers

A:

Only traffic meeting the defined match receives the intended queue and packet loss priority. The specific steps required are to use a permitted firewall or multifield classifier matching the approved traffic fields and assign its forwarding class.

E:

Use a permitted firewall or multifield classifier matching the approved traffic fields and assign its forwarding class. This addresses the dependency that multifield classification can use packet fields for policy distinctions beyond incoming BA header code-point classification.

Incorrect Answers

B:

“Trust arbitrary user DSCP markings as proof every packet belongs in the high-priority class” does not address multifield classification can use packet fields for policy distinctions beyond incoming BA header code-point classification.

C:

“Assume a correct internal forwarding class guarantees outgoing DSCP is preserved without rewrite policy” is an unsafe response to a different problem: a boundary router classifies EF voice traffic correctly but sends outbound DSCP zero, so downstream devices undo priority handling. It is not a valid fix here.

D:

“Mark every forwarding class strict-high with no attention to starvation or bounded resource sharing” is an unsafe response to a different problem: a finance video queue configured as low priority cannot meet latency targets because competing transfers share the same service policy. It is not a valid fix here.

Question 519

The team believes it has resolved this Junos issue: A service provider must carry multiple customer VLAN IDs transparently over one metro Ethernet handoff. Which observation best verifies the specific intended result?

  1. Isolated clients reach the shared service but cannot communicate laterally with other isolated clients.
  2. Community members can communicate as intended while cross-community access remains blocked.
  3. Only the intended endpoint class is moved while nonmatching hosts retain correct access.
  4. Two customers can use overlapping inner VLAN numbers without traffic mixing on the transport.

Explanation

Correct Answer

D:

Two customers can use overlapping inner VLAN numbers without traffic mixing on the transport. This checks the relevant result after design supported stacked VLAN tagging and verify S-tag/C-tag placement at the correct ingress and egress.

Incorrect Answers

A:

“Isolated clients reach the shared service but cannot communicate laterally with other isolated clients” belongs to a separate Ethernet Switching and Spanning Tree issue: a private VLAN isolated endpoint reaches the local gateway but cannot access a peer service that should be shared via a permitted promiscuous port. It does not explain the condition tested here.

B:

“Community members can communicate as intended while cross-community access remains blocked” belongs to a separate Ethernet Switching and Spanning Tree issue: a switch rollout splits a team that should communicate within one PVLAN community, while protecting it from another community. It does not explain the condition tested here.

C:

“Only the intended endpoint class is moved while nonmatching hosts retain correct access” belongs to a separate Ethernet Switching and Spanning Tree issue: a filter-based VLAN security design uses a rule that catches too many packets and steers legitimate devices into quarantine. It does not explain the condition tested here.

Question 520

For this case, select TWO complementary measures or outcome checks that directly resolve the problem: After a RADIUS outage, the access switch opens ports broadly instead of applying the approved restricted server-fail VLAN.

  1. Configure unrestricted access as the universal RADIUS-outage fallback for sensitive access ports.
  2. Use a supported restricted server-fail policy and validate failure handling on the specific Junos platform.
  3. Grant unbounded port access to all endpoints instead of diagnosing the RADIUS/EAP path.
  4. During a simulated RADIUS outage, endpoints receive only the approved degraded-connectivity policy.
  5. Assume any RADIUS Access-Accept forces a requested dynamic VLAN on every Junos switch variant.

Explanation

Correct Answers

B:

Use a supported restricted server-fail policy and validate failure handling on the specific Junos platform. This addresses the dependency that server-fail fallback must be an explicitly scoped authorization policy; availability cannot justify unbounded access.

D:

During a simulated RADIUS outage, endpoints receive only the approved degraded-connectivity policy. The specific steps required are to use a supported restricted server-fail policy and validate failure handling on the specific Junos platform.

Incorrect Answers

A:

“Configure unrestricted access as the universal RADIUS-outage fallback for sensitive access ports” does not address server-fail fallback must be an explicitly scoped authorization policy; availability cannot justify unbounded access.

C:

“Grant unbounded port access to all endpoints instead of diagnosing the RADIUS/EAP path” is an unsafe response to a different problem: a corporate laptop presents valid 802.1X credentials but stays unauthorized because the switch is using the wrong RADIUS server profile. It is not a valid fix here.

E:

“Assume any RADIUS Access-Accept forces a requested dynamic VLAN on every Junos switch variant” is an unsafe response to a different problem: an EAP-compliant endpoint authenticates while the required policy attribute is absent or ignored in switch port authorization. It is not a valid fix here.

Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests

UP

SPECIAL OFFER: GET 10% OFF

This is ONE TIME OFFER

ExamSnap Discount Offer
Enter Your Email Address to Receive Your 10% Off Discount Code

A confirmation link will be sent to this email address to verify your login. *We value your privacy. We will not rent or sell your email address.

Download Free Demo of VCE Exam Simulator

Experience Avanset VCE Exam Simulator for yourself.

Simply submit your e-mail address below to get started with our interactive software demo of your free trial.

Free Demo Limits: In the demo version you will be able to access only first 5 questions from exam.