100% Latest & Updated Microsoft AZ-700 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!
Question 1
A retail company is connecting two Azure regions through a hub and must avoid overlapping IP blocks. Which Azure networking design most directly satisfies this requirement?
- Allocate nonoverlapping VNet address spaces for each region before connectivity
- Allocate a Standard Public IP Prefix and draw public IPs from the prefix
- Implement VNet peering with reciprocal connections
- Configure multiple reachable custom DNS server IPs for the VNet
Explanation
Correct Answer
A:Allocate nonoverlapping VNet address spaces for each region before connectivity addresses the topology, access or delivery requirement in the scenario. Apply it by plan distinct CIDR prefixes and assign them to the regional VNets; confirm by inspect both effective VNet address spaces and prove a route to each unique subnet.
Incorrect Answers
B:Allocate a Standard Public IP Prefix and draw public IPs from the prefix. This concerns providing a contiguous block of predictable Azure public IPs for partner firewall allowlists. Instead, allocate nonoverlapping VNet address spaces for each region before connectivity.
C:Implement VNet peering with reciprocal connections. This concerns two Azure VNets in the same tenant require private low-latency connectivity without routing through the internet. Instead, allocate nonoverlapping VNet address spaces for each region before connectivity.
D:Configure multiple reachable custom DNS server IPs for the VNet. This concerns failover if one resolver is offline. Instead, allocate nonoverlapping VNet address spaces for each region before connectivity.
Question 2
A retail company is connecting two Azure regions through a hub and must avoid overlapping IP blocks. The architecture uses this design: Allocate nonoverlapping VNet address spaces for each region before connectivity. Which configuration should the engineer apply to implement it?
- Attach supported NIC IP configurations to the distinct workload subnets
- Renumber one VNet to a disjoint CIDR and update associated routes
- Plan distinct CIDR prefixes and assign them to the regional VNets
- Associate a DDoS protection plan and configure telemetry alerts
Explanation
Correct Answer
C:Plan distinct CIDR prefixes and assign them to the regional VNets is the operational configuration for allocate nonoverlapping vnet address spaces for each region before connectivity. The acceptance test is to inspect both effective VNet address spaces and prove a route to each unique subnet.
Incorrect Answers
A:Attach supported NIC IP configurations to the distinct workload subnets is a concrete step for assign the appliance nics to valid, segregated subnets within one vnet. Here the selected design is allocate nonoverlapping vnet address spaces for each region before connectivity, which instead requires plan distinct cidr prefixes and assign them to the regional vnets.
B:Renumber one VNet to a disjoint CIDR and update associated routes is a concrete step for eliminate address-space overlap before establishing peering. Here the selected design is allocate nonoverlapping vnet address spaces for each region before connectivity, which instead requires plan distinct cidr prefixes and assign them to the regional vnets.
D:Associate a DDoS protection plan and configure telemetry alerts is a concrete step for enable and monitor azure ddos protection on applicable public-ip vnets. Here the selected design is allocate nonoverlapping vnet address spaces for each region before connectivity, which instead requires plan distinct cidr prefixes and assign them to the regional vnets.
Question 3
A retail company is connecting two Azure regions through a hub and must avoid overlapping IP blocks. After the team applies this change—plan distinct CIDR prefixes and assign them to the regional VNets—which validation best proves the intended result?
- Review subnet delegation and validate the platform deployment
- Inspect both effective VNet address spaces and prove a route to each unique subnet
- Inspect reachability and the hop or issue identified
- Deploy a new VM and inspect the automatically registered A record
Explanation
Correct Answer
B:Inspect both effective VNet address spaces and prove a route to each unique subnet directly checks whether the intended outcome occurs, not merely whether a resource exists. If the check fails, investigate whether the two VNet address prefixes overlap.
Incorrect Answers
A:Review subnet delegation and validate the platform deployment. This concerns retaining separation from general-purpose virtual machines. Instead, inspect both effective VNet address spaces and prove a route to each unique subnet.
C:Inspect reachability and the hop or issue identified. This concerns a path-by-path diagnosis. Instead, inspect both effective VNet address spaces and prove a route to each unique subnet.
D:Deploy a new VM and inspect the automatically registered A record. This concerns automatic hostname registration for its azure virtual machines. Instead, inspect both effective VNet address spaces and prove a route to each unique subnet.
Question 4
A retail company is connecting two Azure regions through a hub and must avoid overlapping IP blocks. During acceptance testing, peering rejects conflicting address ranges. Which underlying configuration problem best explains the symptom?
- One direction of VNet peering or the effective network policy is missing
- The two VNet address prefixes overlap
- The relevant privatelink zone or VNet link is absent
- The deployment scope or network group assignment excludes the VNet
Explanation
Correct Answer
B:The two VNet address prefixes overlap explains the observed failure: peering rejects conflicting address ranges. Correct the design by using allocate nonoverlapping VNet address spaces for each region before connectivity, implemented through plan distinct CIDR prefixes and assign them to the regional VNets.
Incorrect Answers
A:One direction of VNet peering or the effective network policy is missing. This concerns two azure vnets in the same tenant require private low-latency connectivity without routing through the internet. Here, the two VNet address prefixes overlap.
C:The relevant privatelink zone or VNet link is absent. This is relevant when a private key vault endpoint is deployed but clients get an unexpected public resolution. Here, the two VNet address prefixes overlap.
D:The deployment scope or network group assignment excludes the VNet. This is relevant when a large region uses a central routing policy for many hub-spoke links. Here, the two VNet address prefixes overlap.
Question 5
A business division needs 70 usable private addresses for application VMs within a larger VNet. Which Azure networking design most directly satisfies this requirement?
- Place subnet outbound connections behind a NAT Gateway
- Set the NIC's private IP allocation to Static in Azure
- Reserve a subnet CIDR with sufficient capacity after Azure reserves five addresses
- Use Azure Virtual Network Manager connectivity configurations
Explanation
Correct Answer
C:Reserve a subnet CIDR with sufficient capacity after Azure reserves five addresses addresses the topology, access or delivery requirement in the scenario. Apply it by create an appropriately sized subnet and leave five addresses for Azure platform use; confirm by compare usable addresses against projected VM IP demand plus headroom.
Incorrect Answers
A:Place subnet outbound connections behind a NAT Gateway. This concerns egress IP consistency during VM scale-in and scale-out. Here, reserve a subnet CIDR with sufficient capacity after Azure reserves five addresses.
B:Set the NIC's private IP allocation to Static in Azure. This concerns a fixed private address that remains assigned after operating-system restarts. Here, reserve a subnet CIDR with sufficient capacity after Azure reserves five addresses.
D:Use Azure Virtual Network Manager connectivity configurations. This concerns centrally define connectivity groups across dozens of VNets. Here, reserve a subnet CIDR with sufficient capacity after Azure reserves five addresses.
Question 6
A business division needs 70 usable private addresses for application VMs within a larger VNet. The architecture uses this design: Reserve a subnet CIDR with sufficient capacity after Azure reserves five addresses. Which configuration should the engineer apply to implement it?
- Set the subnet delegation to the supported Microsoft service type
- Configure the endpoint zone group for privatelink.vaultcore.azure.net
- Create an appropriately sized subnet and leave five addresses for Azure platform use
- Inspect effective rules for the VM NIC including subnet and NIC scope
Explanation
Correct Answer
C:Create an appropriately sized subnet and leave five addresses for Azure platform use is the operational configuration for reserve a subnet cidr with sufficient capacity after azure reserves five addresses. The acceptance test is to compare usable addresses against projected VM IP demand plus headroom.
Incorrect Answers
A:Set the subnet delegation to the supported Microsoft service type is a concrete step for use a dedicated subnet delegated to the correct resource provider. Here the selected design is reserve a subnet cidr with sufficient capacity after azure reserves five addresses, which instead requires create an appropriately sized subnet and leave five addresses for azure platform use.
B:Configure the endpoint zone group for privatelink.vaultcore.azure.net is a concrete step for bind the appropriate private dns zone to the key vault private endpoint. Here the selected design is reserve a subnet cidr with sufficient capacity after azure reserves five addresses, which instead requires create an appropriately sized subnet and leave five addresses for azure platform use.
D:Inspect effective rules for the VM NIC including subnet and NIC scope is a concrete step for use network watcher effective security rules. Here the selected design is reserve a subnet cidr with sufficient capacity after azure reserves five addresses, which instead requires create an appropriately sized subnet and leave five addresses for azure platform use.
Question 7
A business division needs 70 usable private addresses for application VMs within a larger VNet. After the team applies this change—create an appropriately sized subnet and leave five addresses for Azure platform use—which validation best proves the intended result?
- Scale the VM set and observe unchanged external source addresses
- Compare usable addresses against projected VM IP demand plus headroom
- Confirm created public IP addresses belong to the allocated prefix
- Query the public TXT record and compare the expected verification token
Explanation
Correct Answer
B:Compare usable addresses against projected VM IP demand plus headroom directly checks whether the intended outcome occurs, not merely whether a resource exists. If the check fails, investigate whether the subnet is undersized after Azure-reserved IP addresses.
Incorrect Answers
A:Scale the VM set and observe unchanged external source addresses. This concerns egress ip consistency during vm scale-in and scale-out. Instead, compare usable addresses against projected VM IP demand plus headroom.
C:Confirm created public IP addresses belong to the allocated prefix. This concerns providing a contiguous block of predictable azure public ips for partner firewall allowlists. Instead, compare usable addresses against projected VM IP demand plus headroom.
D:Query the public TXT record and compare the expected verification token. This concerns external consumers to discover its public verification token. Instead, compare usable addresses against projected VM IP demand plus headroom.
Question 8
A business division needs 70 usable private addresses for application VMs within a larger VNet. During acceptance testing, new VM network interfaces cannot obtain private addresses. Which underlying configuration problem best explains the symptom?
- Effective routes in that spoke omit the propagated destination
- The route table was never associated with the workload subnet
- The subnet is undersized after Azure-reserved IP addresses
- Outbound traffic depended on per-instance public IPs instead of subnet NAT
Explanation
Correct Answer
C:The subnet is undersized after Azure-reserved IP addresses explains the observed failure: new VM network interfaces cannot obtain private addresses. Correct the design by using reserve a subnet CIDR with sufficient capacity after Azure reserves five addresses, implemented through create an appropriately sized subnet and leave five addresses for Azure platform use.
Incorrect Answers
A:Effective routes in that spoke omit the propagated destination. This concerns being usable by multiple spoke vnets. Here, the subnet is undersized after Azure-reserved IP addresses.
B:The route table was never associated with the workload subnet. This is relevant when a route table is created but its udrs have no effect on an application vm. Here, the subnet is undersized after Azure-reserved IP addresses.
D:Outbound traffic depended on per-instance public IPs instead of subnet NAT. This concerns egress ip consistency during vm scale-in and scale-out. Here, the subnet is undersized after Azure-reserved IP addresses.
Question 9
A migration adds a second application subnet without changing the first application's private IP space. Which Azure networking design most directly satisfies this requirement?
- Implement VNet peering with reciprocal connections
- Configure multiple reachable custom DNS server IPs for the VNet
- Add a distinct nonoverlapping subnet inside an available VNet prefix
- Avoid attaching unnecessary public IPs to VM NICs and use subnet NAT Gateway
Explanation
Correct Answer
C:Add a distinct nonoverlapping subnet inside an available VNet prefix addresses the topology, access or delivery requirement in the scenario. Apply it by define a subnet prefix that does not intersect existing subnet ranges; confirm by inspect subnet prefixes and provision one test NIC in each.
Incorrect Answers
A:Implement VNet peering with reciprocal connections. This concerns two Azure VNets in the same tenant require private low-latency connectivity without routing through the internet. Instead, add a distinct nonoverlapping subnet inside an available VNet prefix.
B:Configure multiple reachable custom DNS server IPs for the VNet. This concerns failover if one resolver is offline. Instead, add a distinct nonoverlapping subnet inside an available VNet prefix.
D:Avoid attaching unnecessary public IPs to VM NICs and use subnet NAT Gateway. This concerns private VM interfaces but only a central NAT resource exposed to the internet. Instead, add a distinct nonoverlapping subnet inside an available VNet prefix.
Question 10
A migration adds a second application subnet without changing the first application's private IP space. The architecture uses this design: Add a distinct nonoverlapping subnet inside an available VNet prefix. Which configuration should the engineer apply to implement it?
- Inspect effective rules for the VM NIC including subnet and NIC scope
- Set the subnet delegation to the supported Microsoft service type
- Define a subnet prefix that does not intersect existing subnet ranges
- Compare specific UDR and learned BGP prefix lengths on the NIC
Explanation
Correct Answer
C:Define a subnet prefix that does not intersect existing subnet ranges is the operational configuration for add a distinct nonoverlapping subnet inside an available vnet prefix. The acceptance test is to inspect subnet prefixes and provision one test NIC in each.
Incorrect Answers
A:Inspect effective rules for the VM NIC including subnet and NIC scope is a concrete step for use network watcher effective security rules. Here the selected design is add a distinct nonoverlapping subnet inside an available vnet prefix, which instead requires define a subnet prefix that does not intersect existing subnet ranges.
B:Set the subnet delegation to the supported Microsoft service type is a concrete step for use a dedicated subnet delegated to the correct resource provider. Here the selected design is add a distinct nonoverlapping subnet inside an available vnet prefix, which instead requires define a subnet prefix that does not intersect existing subnet ranges.
D:Compare specific UDR and learned BGP prefix lengths on the NIC is a concrete step for apply longest-prefix-match when selecting the effective route. Here the selected design is add a distinct nonoverlapping subnet inside an available vnet prefix, which instead requires define a subnet prefix that does not intersect existing subnet ranges.
Designing and Implementing Microsoft Azure Networking Solutions (AZ-700) Practice Tests