100% Latest & Updated Microsoft AZ-700 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!
Question 10
A migration adds a second application subnet without changing the first application's private IP space. The architecture uses this design: Add a distinct nonoverlapping subnet inside an available VNet prefix. Which configuration should the engineer apply to implement it?
- Inspect effective rules for the VM NIC including subnet and NIC scope
- Set the subnet delegation to the supported Microsoft service type
- Define a subnet prefix that does not intersect existing subnet ranges
- Compare specific UDR and learned BGP prefix lengths on the NIC
Explanation
Correct Answer
C:Define a subnet prefix that does not intersect existing subnet ranges is the operational configuration for add a distinct nonoverlapping subnet inside an available vnet prefix. The acceptance test is to inspect subnet prefixes and provision one test NIC in each.
Incorrect Answers
A:Inspect effective rules for the VM NIC including subnet and NIC scope is a concrete step for use network watcher effective security rules. Here the selected design is add a distinct nonoverlapping subnet inside an available vnet prefix, which instead requires define a subnet prefix that does not intersect existing subnet ranges.
B:Set the subnet delegation to the supported Microsoft service type is a concrete step for use a dedicated subnet delegated to the correct resource provider. Here the selected design is add a distinct nonoverlapping subnet inside an available vnet prefix, which instead requires define a subnet prefix that does not intersect existing subnet ranges.
D:Compare specific UDR and learned BGP prefix lengths on the NIC is a concrete step for apply longest-prefix-match when selecting the effective route. Here the selected design is add a distinct nonoverlapping subnet inside an available vnet prefix, which instead requires define a subnet prefix that does not intersect existing subnet ranges.
Question 11
A migration adds a second application subnet without changing the first application's private IP space. After the team applies this change—define a subnet prefix that does not intersect existing subnet ranges—which validation best proves the intended result?
- Check effective subnet attachment and route behavior for both NICs
- Inspect subnet prefixes and provision one test NIC in each
- Inspect attack metrics and mitigation reports during a controlled event
- Inspect the effective route to the endpoint address separately from the default
Explanation
Correct Answer
B:Inspect subnet prefixes and provision one test NIC in each directly checks whether the intended outcome occurs, not merely whether a resource exists. If the check fails, investigate whether the proposed subnet overlaps an existing subnet.
Incorrect Answers
A:Check effective subnet attachment and route behavior for both NICs. This concerns separating nics for trusted and untrusted network segments. Instead, inspect subnet prefixes and provision one test NIC in each.
C:Inspect attack metrics and mitigation reports during a controlled event. This is relevant when an early warning when its azure public endpoint is targeted by volumetric attacks. Instead, inspect subnet prefixes and provision one test NIC in each.
D:Inspect the effective route to the endpoint address separately from the default. This concerns reaching a local private endpoint directly. Instead, inspect subnet prefixes and provision one test NIC in each.
Question 12
A migration adds a second application subnet without changing the first application's private IP space. During acceptance testing, subnet creation is rejected because its range is already allocated. Which underlying configuration problem best explains the symptom?
- Outbound traffic depended on per-instance public IPs instead of subnet NAT
- The route table was never associated with the workload subnet
- A route, NSG, firewall or listener blocks the tested path
- The proposed subnet overlaps an existing subnet
Explanation
Correct Answer
D:The proposed subnet overlaps an existing subnet explains the observed failure: subnet creation is rejected because its range is already allocated. Correct the design by using add a distinct nonoverlapping subnet inside an available VNet prefix, implemented through define a subnet prefix that does not intersect existing subnet ranges.
Incorrect Answers
A:Outbound traffic depended on per-instance public IPs instead of subnet NAT. This concerns egress ip consistency during vm scale-in and scale-out. Here, the proposed subnet overlaps an existing subnet.
B:The route table was never associated with the workload subnet. This is relevant when a route table is created but its udrs have no effect on an application vm. Here, the proposed subnet overlaps an existing subnet.
C:A route, NSG, firewall or listener blocks the tested path. This concerns a path-by-path diagnosis. Here, the proposed subnet overlaps an existing subnet.
Question 13
A delegated subnet is needed for an Azure platform service that requires exclusive delegation. Which TWO listed choices identify the suitable Azure design and the concrete configuration required to implement it? (Choose TWO.)
- Set the subnet delegation to the supported Microsoft service type
- Enable forwarded traffic on the necessary peering connections and use correct routes
- Create Route Server in its required dedicated subnet and set NVA BGP peer parameters
- Use a dedicated subnet delegated to the correct resource provider
- Add a distinct nonoverlapping subnet inside an available VNet prefix
Explanation
Correct Answers
A:Set the subnet delegation to the supported Microsoft service type is the operational configuration for use a dedicated subnet delegated to the correct resource provider. The acceptance test is to verify deployment and inspect the subnet delegation property.
D:Use a dedicated subnet delegated to the correct resource provider addresses the topology, access or delivery requirement in the scenario. Apply it by set the subnet delegation to the supported Microsoft service type; confirm by verify deployment and inspect the subnet delegation property.
Incorrect Answers
B:Enable forwarded traffic on the necessary peering connections and use correct routes. This concerns a hub NVA will inspect traffic forwarded between peered VNets. Instead, set the subnet delegation to the supported Microsoft service type.
C:Create Route Server in its required dedicated subnet and set NVA BGP peer parameters is a concrete step for deploy azure route server and establish bgp peering with the nva. Here the selected design is use a dedicated subnet delegated to the correct resource provider, which instead requires set the subnet delegation to the supported microsoft service type.
E:Add a distinct nonoverlapping subnet inside an available VNet prefix. This concerns a migration adds a second application subnet without changing the first application's private IP space. Instead, set the subnet delegation to the supported Microsoft service type.
Question 14
A delegated subnet is needed for an Azure platform service that requires exclusive delegation. The architecture uses this design: Use a dedicated subnet delegated to the correct resource provider. Which configuration should the engineer apply to implement it?
- Set the subnet delegation to the supported Microsoft service type
- Enable the supported BGP propagation path and review spoke effective routes
- Create Route Server in its required dedicated subnet and set NVA BGP peer parameters
- Choose a subnet in the target VNet and allocate a private endpoint there
Explanation
Correct Answer
A:Set the subnet delegation to the supported Microsoft service type is the operational configuration for use a dedicated subnet delegated to the correct resource provider. The acceptance test is to verify deployment and inspect the subnet delegation property.
Incorrect Answers
B:Enable the supported BGP propagation path and review spoke effective routes is a concrete step for validate route propagation and route selection from the connected hub. Here the selected design is use a dedicated subnet delegated to the correct resource provider, which instead requires set the subnet delegation to the supported microsoft service type.
C:Create Route Server in its required dedicated subnet and set NVA BGP peer parameters is a concrete step for deploy azure route server and establish bgp peering with the nva. Here the selected design is use a dedicated subnet delegated to the correct resource provider, which instead requires set the subnet delegation to the supported microsoft service type.
D:Choose a subnet in the target VNet and allocate a private endpoint there is a concrete step for create a suitable subnet and deploy the private endpoint nic in it. Here the selected design is use a dedicated subnet delegated to the correct resource provider, which instead requires set the subnet delegation to the supported microsoft service type.
Question 15
A delegated subnet is needed for an Azure platform service that requires exclusive delegation. After the team applies this change—set the subnet delegation to the supported Microsoft service type—which validation best proves the intended result?
- Inspect deployed effective routing configuration and sample packet flows
- Restart the guest and inspect Azure NIC configuration and observed host address
- Query both FQDNs externally and verify their expected targets
- Verify deployment and inspect the subnet delegation property
Explanation
Correct Answer
D:Verify deployment and inspect the subnet delegation property directly checks whether the intended outcome occurs, not merely whether a resource exists. If the check fails, investigate whether the subnet lacks the service's required delegation.
Incorrect Answers
A:Inspect deployed effective routing configuration and sample packet flows. This is relevant when a large region uses a central routing policy for many hub-spoke links. Instead, verify deployment and inspect the subnet delegation property.
B:Restart the guest and inspect Azure NIC configuration and observed host address. This concerns a fixed private address that remains assigned after operating-system restarts. Instead, verify deployment and inspect the subnet delegation property.
C:Query both FQDNs externally and verify their expected targets. This concerns being reachable at both apex and www with proper public DNS. Instead, verify deployment and inspect the subnet delegation property.
Question 16
A delegated subnet is needed for an Azure platform service that requires exclusive delegation. During acceptance testing, the platform resource cannot attach to the subnet. Which underlying configuration problem best explains the symptom?
- Outbound traffic depended on per-instance public IPs instead of subnet NAT
- The subnet lacks the service's required delegation
- The required UDR is missing or less specific than another route
- The route table was never associated with the workload subnet
Explanation
Correct Answer
B:The subnet lacks the service's required delegation explains the observed failure: the platform resource cannot attach to the subnet. Correct the design by using use a dedicated subnet delegated to the correct resource provider, implemented through set the subnet delegation to the supported Microsoft service type.
Incorrect Answers
A:Outbound traffic depended on per-instance public IPs instead of subnet NAT. This concerns egress ip consistency during vm scale-in and scale-out. Here, the subnet lacks the service's required delegation.
C:The required UDR is missing or less specific than another route. This concerns using a specific next hop. Here, the subnet lacks the service's required delegation.
D:The route table was never associated with the workload subnet. This is relevant when a route table is created but its udrs have no effect on an application vm. Here, the subnet lacks the service's required delegation.
Question 17
A private endpoint will coexist with VMs but must have an address in a planned network segment. Which Azure networking design most directly satisfies this requirement?
- Deploy a supported Azure Virtual Network Manager routing configuration
- Create a suitable subnet and deploy the private endpoint NIC in it
- Use Azure DNS Private Resolver with inbound and outbound resolution paths
- Place the managed service into its required dedicated or delegated subnet
Explanation
Correct Answer
B:Create a suitable subnet and deploy the private endpoint NIC in it addresses the topology, access or delivery requirement in the scenario. Apply it by choose a subnet in the target VNet and allocate a private endpoint there; confirm by inspect the private endpoint NIC private address and approved connection.
Incorrect Answers
A:Deploy a supported Azure Virtual Network Manager routing configuration. This is relevant when a large region uses a central routing policy for many hub-spoke links. Instead, create a suitable subnet and deploy the private endpoint NIC in it.
C:Use Azure DNS Private Resolver with inbound and outbound resolution paths. This concerns resolving an internal name in Azure and an on-premises name over hybrid connectivity. Instead, create a suitable subnet and deploy the private endpoint NIC in it.
D:Place the managed service into its required dedicated or delegated subnet. This concerns retaining separation from general-purpose virtual machines. Instead, create a suitable subnet and deploy the private endpoint NIC in it.
Question 18
A private endpoint will coexist with VMs but must have an address in a planned network segment. The architecture uses this design: Create a suitable subnet and deploy the private endpoint NIC in it. Which configuration should the engineer apply to implement it?
- Choose a subnet in the target VNet and allocate a private endpoint there
- Start a diagnostic from source VM to target IP and port
- Create the private zone and add a virtual network link
- Set the subnet delegation to the supported Microsoft service type
Explanation
Correct Answer
A:Choose a subnet in the target VNet and allocate a private endpoint there is the operational configuration for create a suitable subnet and deploy the private endpoint nic in it. The acceptance test is to inspect the private endpoint NIC private address and approved connection.
Incorrect Answers
B:Start a diagnostic from source VM to target IP and port is a concrete step for use network watcher connection troubleshoot. Here the selected design is create a suitable subnet and deploy the private endpoint nic in it, which instead requires choose a subnet in the target vnet and allocate a private endpoint there.
C:Create the private zone and add a virtual network link is a concrete step for use an azure private dns zone linked to the relevant vnet. Here the selected design is create a suitable subnet and deploy the private endpoint nic in it, which instead requires choose a subnet in the target vnet and allocate a private endpoint there.
D:Set the subnet delegation to the supported Microsoft service type is a concrete step for use a dedicated subnet delegated to the correct resource provider. Here the selected design is create a suitable subnet and deploy the private endpoint nic in it, which instead requires choose a subnet in the target vnet and allocate a private endpoint there.
Question 19
A private endpoint will coexist with VMs but must have an address in a planned network segment. After the team applies this change—choose a subnet in the target VNet and allocate a private endpoint there—which validation best proves the intended result?
- Inspect the private endpoint NIC private address and approved connection
- Query the private hostname from a linked VM and from an unrelated outside resolver
- Verify VMs in both subnets show the approved shared egress IPs
- Inspect attack metrics and mitigation reports during a controlled event
Explanation
Correct Answer
A:Inspect the private endpoint NIC private address and approved connection directly checks whether the intended outcome occurs, not merely whether a resource exists. If the check fails, investigate whether the private endpoint or its private DNS integration is missing.
Incorrect Answers
B:Query the private hostname from a linked VM and from an unrelated outside resolver. This is relevant when an internal hostname that should never appear in public DNS. Instead, inspect the private endpoint NIC private address and approved connection.
C:Verify VMs in both subnets show the approved shared egress IPs. This concerns outbound public ip assignment from a common address pool for multiple application tiers. Instead, inspect the private endpoint NIC private address and approved connection.
D:Inspect attack metrics and mitigation reports during a controlled event. This is relevant when an early warning when its azure public endpoint is targeted by volumetric attacks. Instead, inspect the private endpoint NIC private address and approved connection.
Question 20
A private endpoint will coexist with VMs but must have an address in a planned network segment. During acceptance testing, the endpoint resolves to a public address instead of a VNet IP. Which underlying configuration problem best explains the symptom?
- The private endpoint or its private DNS integration is missing
- The required UDR is missing or less specific than another route
- One direction of VNet peering or the effective network policy is missing
- Private DNS links were configured only for the first two spokes
Explanation
Correct Answer
A:The private endpoint or its private DNS integration is missing explains the observed failure: the endpoint resolves to a public address instead of a VNet IP. Correct the design by using create a suitable subnet and deploy the private endpoint NIC in it, implemented through choose a subnet in the target VNet and allocate a private endpoint there.
Incorrect Answers
B:The required UDR is missing or less specific than another route. This concerns using a specific next hop. Here, the private endpoint or its private DNS integration is missing.
C:One direction of VNet peering or the effective network policy is missing. This concerns two azure vnets in the same tenant require private low-latency connectivity without routing through the internet. Here, the private endpoint or its private DNS integration is missing.
D:Private DNS links were configured only for the first two spokes. This concerns a shared hub contains a private DNS zone but only one of three spokes resolves it. Here, the private endpoint or its private DNS integration is missing.
Designing and Implementing Microsoft Azure Networking Solutions (AZ-700) Practice Tests