Microsoft AZ-700 Exam Dumps, Practice Test Questions

100% Latest & Updated Microsoft AZ-700 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!

Microsoft AZ-700 Premium Bundle
$79.97
$59.98

AZ-700 Premium Bundle

  • Premium File: 406 Questions & Answers. Last update: Nov 12, 2026
  • Training Course: 64 Video Lectures
  • Study Guide: 762 Pages
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates

AZ-700 Premium Bundle

Microsoft AZ-700 Premium Bundle
  • Premium File: 406 Questions & Answers. Last update: Nov 12, 2026
  • Training Course: 64 Video Lectures
  • Study Guide: 762 Pages
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates
$79.97
$59.98

Microsoft AZ-700 Practice Test 16

Question 150

A company wants a reliable way to diagnose whether a private endpoint DNS problem is name resolution or connectivity. The architecture uses this design: Test DNS answers and direct private-IP TCP reachability separately. Which configuration should the engineer apply to implement it?

  1. Start a diagnostic from source VM to target IP and port
  2. Run connection troubleshoot for source VM, destination and port
  3. Run nslookup or Resolve-DnsName and a port connectivity test against the returned IP
  4. Create ruleset virtual network links and point each suffix to the chosen targets

Explanation

Correct Answer

C:

Run nslookup or Resolve-DnsName and a port connectivity test against the returned IP is the operational configuration for test dns answers and direct private-ip tcp reachability separately. The acceptance test is to record the IP, selected zone link and observed service port response.

Incorrect Answers

A:

Start a diagnostic from source VM to target IP and port is a concrete step for use network watcher connection troubleshoot. Here the selected design is test dns answers and direct private-ip tcp reachability separately, which instead requires run nslookup or resolve-dnsname and a port connectivity test against the returned ip.

B:

Run connection troubleshoot for source VM, destination and port is a concrete step for use network watcher connection troubleshooting and effective network checks. Here the selected design is test dns answers and direct private-ip tcp reachability separately, which instead requires run nslookup or resolve-dnsname and a port connectivity test against the returned ip.

D:

Create ruleset virtual network links and point each suffix to the chosen targets is a concrete step for link the dns private resolver forwarding ruleset to the required virtual networks. Here the selected design is test dns answers and direct private-ip tcp reachability separately, which instead requires run nslookup or resolve-dnsname and a port connectivity test against the returned ip.

Question 151

A company wants a reliable way to diagnose whether a private endpoint DNS problem is name resolution or connectivity. After the team applies this change—run nslookup or Resolve-DnsName and a port connectivity test against the returned IP—which validation best proves the intended result?

  1. Deploy a new VM and inspect the automatically registered A record
  2. Verify inbound DNS frontend mapping and outbound observed source IPs separately
  3. Restart the guest and inspect Azure NIC configuration and observed host address
  4. Record the IP, selected zone link and observed service port response

Explanation

Correct Answer

D:

Record the IP, selected zone link and observed service port response directly checks whether the intended outcome occurs, not merely whether a resource exists. If the check fails, investigate whether private DNS integration, rather than private endpoint routing, is defective.

Incorrect Answers

A:

Deploy a new VM and inspect the automatically registered A record. This concerns automatic hostname registration for its azure virtual machines. Instead, record the IP, selected zone link and observed service port response.

B:

Verify inbound DNS frontend mapping and outbound observed source IPs separately. This concerns both its public ingress and outbound source ip addresses to remain fixed. Instead, record the IP, selected zone link and observed service port response.

C:

Restart the guest and inspect Azure NIC configuration and observed host address. This concerns a fixed private address that remains assigned after operating-system restarts. Instead, record the IP, selected zone link and observed service port response.

Question 152

A company wants a reliable way to diagnose whether a private endpoint DNS problem is name resolution or connectivity. During acceptance testing, the FQDN returns a public address while the endpoint private IP is reachable. Which underlying configuration problem best explains the symptom?

  1. Network endpoint probes were not configured
  2. Private DNS integration, rather than private endpoint routing, is defective
  3. The required UDR is missing or less specific than another route
  4. Metric alert rules or action group routing is missing

Explanation

Correct Answer

B:

Private DNS integration, rather than private endpoint routing, is defective explains the observed failure: the FQDN returns a public address while the endpoint private IP is reachable. Correct the design by using test DNS answers and direct private-IP TCP reachability separately, implemented through run nslookup or Resolve-DnsName and a port connectivity test against the returned IP.

Incorrect Answers

A:

Network endpoint probes were not configured. This concerns watch DNS endpoint reachability, not merely vm cpu health. Here, private DNS integration, rather than private endpoint routing, is defective.

C:

The required UDR is missing or less specific than another route. This concerns using a specific next hop. Here, private DNS integration, rather than private endpoint routing, is defective.

D:

Metric alert rules or action group routing is missing. This concerns actionable health alerts when expressroute or vpn resources degrade. Here, private DNS integration, rather than private endpoint routing, is defective.

Question 153

Two Azure VNets in the same tenant require private low-latency connectivity without routing through the internet. Which TWO listed choices identify the suitable Azure design and the concrete configuration required to implement it? (Choose TWO.)

  1. Implement VNet peering with reciprocal connections
  2. Create peering in each VNet and enable virtual network access
  3. Create the public IP prefix in the intended region and create addresses from it
  4. Assign the appliance NICs to valid, segregated subnets within one VNet
  5. Associate a user-defined route with Virtual appliance next hop

Explanation

Correct Answers

A:

Implement VNet peering with reciprocal connections addresses the topology, access or delivery requirement in the scenario. Apply it by create peering in each VNet and enable virtual network access; confirm by ping or establish approved private TCP flow between test resources.

B:

Create peering in each VNet and enable virtual network access is the operational configuration for implement vnet peering with reciprocal connections. The acceptance test is to ping or establish approved private TCP flow between test resources.

Incorrect Answers

C:

Create the public IP prefix in the intended region and create addresses from it is a concrete step for allocate a standard public ip prefix and draw public ips from the prefix. Here the selected design is implement vnet peering with reciprocal connections, which instead requires create peering in each vnet and enable virtual network access.

D:

Assign the appliance NICs to valid, segregated subnets within one VNet. This concerns separating NICs for trusted and untrusted network segments. Instead, implement VNet peering with reciprocal connections.

E:

Associate a user-defined route with Virtual appliance next hop. This concerns using a specific next hop. Instead, implement VNet peering with reciprocal connections.

Question 154

Two Azure VNets in the same tenant require private low-latency connectivity without routing through the internet. The architecture uses this design: Implement VNet peering with reciprocal connections. Which configuration should the engineer apply to implement it?

  1. Create peering in each VNet and enable virtual network access
  2. Configure VNet flow log collection to a supported storage destination
  3. Open Network Watcher effective routes for the VM NIC
  4. Create the public IP prefix in the intended region and create addresses from it

Explanation

Correct Answer

A:

Create peering in each VNet and enable virtual network access is the operational configuration for implement vnet peering with reciprocal connections. The acceptance test is to ping or establish approved private TCP flow between test resources.

Incorrect Answers

B:

Configure VNet flow log collection to a supported storage destination is a concrete step for enable virtual network flow logs on the supported network scope. Here the selected design is implement vnet peering with reciprocal connections, which instead requires create peering in each vnet and enable virtual network access.

C:

Open Network Watcher effective routes for the VM NIC is a concrete step for inspect the network interface's effective routes. Here the selected design is implement vnet peering with reciprocal connections, which instead requires create peering in each vnet and enable virtual network access.

D:

Create the public IP prefix in the intended region and create addresses from it is a concrete step for allocate a standard public ip prefix and draw public ips from the prefix. Here the selected design is implement vnet peering with reciprocal connections, which instead requires create peering in each vnet and enable virtual network access.

Question 155

Two Azure VNets in the same tenant require private low-latency connectivity without routing through the internet. After the team applies this change—create peering in each VNet and enable virtual network access—which validation best proves the intended result?

  1. Inspect effective default route and trace an outbound flow
  2. Inspect subnet prefixes and provision one test NIC in each
  3. Ping or establish approved private TCP flow between test resources
  4. Verify the VM has no public NIC IP but can reach approved external targets

Explanation

Correct Answer

C:

Ping or establish approved private TCP flow between test resources directly checks whether the intended outcome occurs, not merely whether a resource exists. If the check fails, investigate whether one direction of VNet peering or the effective network policy is missing.

Incorrect Answers

A:

Inspect effective default route and trace an outbound flow. This concerns sending all internet-bound traffic to an on-premises perimeter. Here, ping or establish approved private TCP flow between test resources.

B:

Inspect subnet prefixes and provision one test NIC in each. This concerns a migration adds a second application subnet without changing the first application's private ip space. Here, ping or establish approved private TCP flow between test resources.

D:

Verify the VM has no public NIC IP but can reach approved external targets. This concerns private vm interfaces but only a central nat resource exposed to the internet. Here, ping or establish approved private TCP flow between test resources.

Question 156

Two Azure VNets in the same tenant require private low-latency connectivity without routing through the internet. During acceptance testing, peered subnets cannot exchange private traffic despite healthy VMs. Which underlying configuration problem best explains the symptom?

  1. Environment prefixes were reused without network isolation
  2. The forwarding ruleset link is missing from the spoke
  3. Metric alert rules or action group routing is missing
  4. One direction of VNet peering or the effective network policy is missing

Explanation

Correct Answer

D:

One direction of VNet peering or the effective network policy is missing explains the observed failure: peered subnets cannot exchange private traffic despite healthy VMs. Correct the design by using implement VNet peering with reciprocal connections, implemented through create peering in each VNet and enable virtual network access.

Incorrect Answers

A:

Environment prefixes were reused without network isolation. This concerns separating address spaces for dev, staging, and production inside a shared environment. Here, one direction of VNet peering or the effective network policy is missing.

B:

The forwarding ruleset link is missing from the spoke. This concerns a private DNS forwarding ruleset available to multiple spokes. Here, one direction of VNet peering or the effective network policy is missing.

C:

Metric alert rules or action group routing is missing. This concerns actionable health alerts when expressroute or vpn resources degrade. Here, one direction of VNet peering or the effective network policy is missing.

Question 157

A spoke must use the hub's VPN gateway to communicate with an on-premises network. Which Azure networking design most directly satisfies this requirement?

  1. Implement VNet peering with reciprocal connections
  2. Configure targeted connection monitoring for the network endpoint
  3. Configure hub gateway transit and spoke use-remote-gateways peering options
  4. Configure multiple reachable custom DNS server IPs for the VNet

Explanation

Correct Answer

C:

Configure hub gateway transit and spoke use-remote-gateways peering options addresses the topology, access or delivery requirement in the scenario. Apply it by enable Allow gateway transit on hub peering and Use remote gateways on spoke peering; confirm by inspect effective routes in the spoke for on-premises prefixes via the hub.

Incorrect Answers

A:

Implement VNet peering with reciprocal connections. This concerns two Azure VNets in the same tenant require private low-latency connectivity without routing through the internet. Instead, configure hub gateway transit and spoke use-remote-gateways peering options.

B:

Configure targeted connection monitoring for the network endpoint. This concerns watch DNS endpoint reachability, not merely VM CPU health. Instead, configure hub gateway transit and spoke use-remote-gateways peering options.

D:

Configure multiple reachable custom DNS server IPs for the VNet. This concerns failover if one resolver is offline. Instead, configure hub gateway transit and spoke use-remote-gateways peering options.

Question 158

A spoke must use the hub's VPN gateway to communicate with an on-premises network. The architecture uses this design: Configure hub gateway transit and spoke use-remote-gateways peering options. Which configuration should the engineer apply to implement it?

  1. Set Allow forwarded traffic as required and install UDRs toward the NVA
  2. Associate the configured NAT Gateway with both application subnets
  3. Remove direct VM public IP attachments and configure NAT Gateway egress
  4. Enable Allow gateway transit on hub peering and Use remote gateways on spoke peering

Explanation

Correct Answer

D:

Enable Allow gateway transit on hub peering and Use remote gateways on spoke peering is the operational configuration for configure hub gateway transit and spoke use-remote-gateways peering options. The acceptance test is to inspect effective routes in the spoke for on-premises prefixes via the hub.

Incorrect Answers

A:

Set Allow forwarded traffic as required and install UDRs toward the NVA is a concrete step for enable forwarded traffic on the necessary peering connections and use correct routes. Here the selected design is configure hub gateway transit and spoke use-remote-gateways peering options, which instead requires enable allow gateway transit on hub peering and use remote gateways on spoke peering.

B:

Associate the configured NAT Gateway with both application subnets is a concrete step for attach outbound nat resources to each intended workload subnet. Here the selected design is configure hub gateway transit and spoke use-remote-gateways peering options, which instead requires enable allow gateway transit on hub peering and use remote gateways on spoke peering.

C:

Remove direct VM public IP attachments and configure NAT Gateway egress is a concrete step for avoid attaching unnecessary public ips to vm nics and use subnet nat gateway. Here the selected design is configure hub gateway transit and spoke use-remote-gateways peering options, which instead requires enable allow gateway transit on hub peering and use remote gateways on spoke peering.

Question 159

A spoke must use the hub's VPN gateway to communicate with an on-premises network. After the team applies this change—enable Allow gateway transit on hub peering and Use remote gateways on spoke peering—which validation best proves the intended result?

  1. Check effective subnet attachment and route behavior for both NICs
  2. Check the effective VNet Manager configuration and cross-group reachability
  3. Inspect collected flow records and test an allowed and denied connection
  4. Inspect effective routes in the spoke for on-premises prefixes via the hub

Explanation

Correct Answer

D:

Inspect effective routes in the spoke for on-premises prefixes via the hub directly checks whether the intended outcome occurs, not merely whether a resource exists. If the check fails, investigate whether gateway transit was not enabled correctly on the peering pair.

Incorrect Answers

A:

Check effective subnet attachment and route behavior for both NICs. This concerns separating nics for trusted and untrusted network segments. Instead, inspect effective routes in the spoke for on-premises prefixes via the hub.

B:

Check the effective VNet Manager configuration and cross-group reachability. This concerns centrally define connectivity groups across dozens of vnets. Instead, inspect effective routes in the spoke for on-premises prefixes via the hub.

C:

Inspect collected flow records and test an allowed and denied connection. This concerns a durable record of permitted and denied VNet traffic. Instead, inspect effective routes in the spoke for on-premises prefixes via the hub.

Question 160

A spoke must use the hub's VPN gateway to communicate with an on-premises network. During acceptance testing, the spoke has no route to the connected datacenter. Which underlying configuration problem best explains the symptom?

  1. Virtual network flow log collection is not enabled
  2. The hub allocation failed to reserve adequate gateway subnet space
  3. Gateway transit was not enabled correctly on the peering pair
  4. Its subnet was omitted from the NAT Gateway association

Explanation

Correct Answer

C:

Gateway transit was not enabled correctly on the peering pair explains the observed failure: the spoke has no route to the connected datacenter. Correct the design by using configure hub gateway transit and spoke use-remote-gateways peering options, implemented through enable Allow gateway transit on hub peering and Use remote gateways on spoke peering.

Incorrect Answers

A:

Virtual network flow log collection is not enabled. This concerns a durable record of permitted and denied VNet traffic. Here, gateway transit was not enabled correctly on the peering pair.

B:

The hub allocation failed to reserve adequate gateway subnet space. This concerns route-aware service placement before defining the hub address blocks. Here, gateway transit was not enabled correctly on the peering pair.

D:

Its subnet was omitted from the NAT Gateway association. This concerns outbound public ip assignment from a common address pool for multiple application tiers. Here, gateway transit was not enabled correctly on the peering pair.

Designing and Implementing Microsoft Azure Networking Solutions (AZ-700) Practice Tests

UP

SPECIAL OFFER: GET 10% OFF

This is ONE TIME OFFER

ExamSnap Discount Offer
Enter Your Email Address to Receive Your 10% Off Discount Code

A confirmation link will be sent to this email address to verify your login. *We value your privacy. We will not rent or sell your email address.

Download Free Demo of VCE Exam Simulator

Experience Avanset VCE Exam Simulator for yourself.

Simply submit your e-mail address below to get started with our interactive software demo of your free trial.

Free Demo Limits: In the demo version you will be able to access only first 5 questions from exam.