100% Latest & Updated Microsoft AZ-700 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!
Question 170
A regulated spoke must send all internet-bound traffic to an on-premises perimeter. The architecture uses this design: Configure forced tunneling through a virtual appliance or hybrid gateway. Which configuration should the engineer apply to implement it?
- Create the MX record set with the provider-supplied priority and hostname
- Associate the configured NAT Gateway with both application subnets
- Select the subnet in the route table Subnets association settings
- Apply an appropriate 0.0.0.0/0 UDR to the workload subnet with the inspection next hop
Explanation
Correct Answer
D:Apply an appropriate 0.0.0.0/0 UDR to the workload subnet with the inspection next hop is the operational configuration for configure forced tunneling through a virtual appliance or hybrid gateway. The acceptance test is to inspect effective default route and trace an outbound flow.
Incorrect Answers
A:Create the MX record set with the provider-supplied priority and hostname is a concrete step for publish the correct mx resource record in an azure public dns zone. Here the selected design is configure forced tunneling through a virtual appliance or hybrid gateway, which instead requires apply an appropriate 0.0.0.0/0 udr to the workload subnet with the inspection next hop.
B:Associate the configured NAT Gateway with both application subnets is a concrete step for attach outbound nat resources to each intended workload subnet. Here the selected design is configure forced tunneling through a virtual appliance or hybrid gateway, which instead requires apply an appropriate 0.0.0.0/0 udr to the workload subnet with the inspection next hop.
C:Select the subnet in the route table Subnets association settings is a concrete step for associate the route table with the vm's subnet. Here the selected design is configure forced tunneling through a virtual appliance or hybrid gateway, which instead requires apply an appropriate 0.0.0.0/0 udr to the workload subnet with the inspection next hop.
Question 171
A regulated spoke must send all internet-bound traffic to an on-premises perimeter. After the team applies this change—apply an appropriate 0.0.0.0/0 UDR to the workload subnet with the inspection next hop—which validation best proves the intended result?
- Inspect guest resolver settings and query an AD-integrated name
- Verify deployment and inspect the subnet delegation property
- Inspect effective default route and trace an outbound flow
- Inspect both forward and reverse paths through the firewall
Explanation
Correct Answer
C:Inspect effective default route and trace an outbound flow directly checks whether the intended outcome occurs, not merely whether a resource exists. If the check fails, investigate whether the default UDR or propagated route sends traffic to the wrong next hop.
Incorrect Answers
A:Inspect guest resolver settings and query an AD-integrated name. This is relevant when a VNet uses an on-premises domain controller for DNS and a new vm still queries azure platform DNS. Instead, inspect effective default route and trace an outbound flow.
B:Verify deployment and inspect the subnet delegation property. This concerns exclusive delegation. Instead, inspect effective default route and trace an outbound flow.
D:Inspect both forward and reverse paths through the firewall. This concerns permit service chaining through a firewall shared by multiple spokes. Instead, inspect effective default route and trace an outbound flow.
Question 172
A regulated spoke must send all internet-bound traffic to an on-premises perimeter. During acceptance testing, spoke internet traffic exits directly instead of through the perimeter. Which underlying configuration problem best explains the symptom?
- Its NIC is attached to the wrong subnet or not configured
- The default UDR or propagated route sends traffic to the wrong next hop
- The platform subnet name or required sizing is incorrect
- A route, NSG, firewall or listener blocks the tested path
Explanation
Correct Answer
B:The default UDR or propagated route sends traffic to the wrong next hop explains the observed failure: spoke internet traffic exits directly instead of through the perimeter. Correct the design by using configure forced tunneling through a virtual appliance or hybrid gateway, implemented through apply an appropriate 0.0.0.0/0 UDR to the workload subnet with the inspection next hop.
Incorrect Answers
A:Its NIC is attached to the wrong subnet or not configured. This concerns separating nics for trusted and untrusted network segments. Here, the default UDR or propagated route sends traffic to the wrong next hop.
C:The platform subnet name or required sizing is incorrect. This concerns a company expects several firewalls, gateways, and bastion services to use separate platform subnets. Here, the default UDR or propagated route sends traffic to the wrong next hop.
D:A route, NSG, firewall or listener blocks the tested path. This concerns a path-by-path diagnosis. Here, the default UDR or propagated route sends traffic to the wrong next hop.
Question 173
A network team must find which route an Azure VM actually uses after peering and BGP advertisements. Which Azure networking design most directly satisfies this requirement?
- Apply longest-prefix-match when selecting the effective route
- Enable Activity Log and central diagnostic retention for network control-plane events
- Inspect the network interface's effective routes
- Attach private DNS zone virtual network links to each required spoke
Explanation
Correct Answer
C:Inspect the network interface's effective routes addresses the topology, access or delivery requirement in the scenario. Apply it by open Network Watcher effective routes for the VM NIC; confirm by compare longest-prefix selection against the destination and expected next hop.
Incorrect Answers
A:Apply longest-prefix-match when selecting the effective route. This concerns a VM has an effective UDR for a private destination and a broader BGP route for the same service. Instead, inspect the network interface's effective routes.
B:Enable Activity Log and central diagnostic retention for network control-plane events. This concerns tracking of VNet peering changes across subscriptions. Instead, inspect the network interface's effective routes.
D:Attach private DNS zone virtual network links to each required spoke. This concerns a shared hub contains a Private DNS zone but only one of three spokes resolves it. Instead, inspect the network interface's effective routes.
Question 174
A network team must find which route an Azure VM actually uses after peering and BGP advertisements. The architecture uses this design: Inspect the network interface's effective routes. Which configuration should the engineer apply to implement it?
- Enable relevant Azure Monitor network resource metrics and diagnostic settings
- Open Network Watcher effective routes for the VM NIC
- Create peering in each VNet and enable virtual network access
- Create a virtual network link with registration enabled for the owning VNet
Explanation
Correct Answer
B:Open Network Watcher effective routes for the VM NIC is the operational configuration for inspect the network interface's effective routes. The acceptance test is to compare longest-prefix selection against the destination and expected next hop.
Incorrect Answers
A:Enable relevant Azure Monitor network resource metrics and diagnostic settings is a concrete step for use azure monitor network insights and appropriate network telemetry. Here the selected design is inspect the network interface's effective routes, which instead requires open network watcher effective routes for the vm nic.
C:Create peering in each VNet and enable virtual network access is a concrete step for implement vnet peering with reciprocal connections. Here the selected design is inspect the network interface's effective routes, which instead requires open network watcher effective routes for the vm nic.
D:Create a virtual network link with registration enabled for the owning VNet is a concrete step for enable auto-registration on the appropriate private dns zone vnet link. Here the selected design is inspect the network interface's effective routes, which instead requires open network watcher effective routes for the vm nic.
Question 175
A network team must find which route an Azure VM actually uses after peering and BGP advertisements. After the team applies this change—open Network Watcher effective routes for the VM NIC—which validation best proves the intended result?
- Confirm created public IP addresses belong to the allocated prefix
- Observe the expected static source IP on outbound TCP probes
- Query the authoritative public zone for MX and confirm expected values
- Compare longest-prefix selection against the destination and expected next hop
Explanation
Correct Answer
D:Compare longest-prefix selection against the destination and expected next hop directly checks whether the intended outcome occurs, not merely whether a resource exists. If the check fails, investigate whether a more specific effective route supersedes the expected route.
Incorrect Answers
A:Confirm created public IP addresses belong to the allocated prefix. This concerns providing a contiguous block of predictable azure public ips for partner firewall allowlists. Instead, compare longest-prefix selection against the destination and expected next hop.
B:Observe the expected static source IP on outbound TCP probes. This concerns scalable outbound connectivity from several subnets without public ips on the vms. Instead, compare longest-prefix selection against the destination and expected next hop.
C:Query the authoritative public zone for MX and confirm expected values. This concerns direct mail to an externally hosted mail service. Instead, compare longest-prefix selection against the destination and expected next hop.
Question 176
A network team must find which route an Azure VM actually uses after peering and BGP advertisements. During acceptance testing, an unexpected peering route takes precedence over the intended next hop. Which underlying configuration problem best explains the symptom?
- An effective NSG rule denies the tested flow
- Effective security rules from both attachment levels were not considered
- A route, NSG, firewall or listener blocks the tested path
- A more specific effective route supersedes the expected route
Explanation
Correct Answer
D:A more specific effective route supersedes the expected route explains the observed failure: an unexpected peering route takes precedence over the intended next hop. Correct the design by using inspect the network interface's effective routes, implemented through open Network Watcher effective routes for the VM NIC.
Incorrect Answers
A:An effective NSG rule denies the tested flow. This concerns knowing if an NSG blocks a vm's outbound tcp connection. Here, a more specific effective route supersedes the expected route.
B:Effective security rules from both attachment levels were not considered. This concerns identifying effective network security rules after overlapping NSG associations. Here, a more specific effective route supersedes the expected route.
C:A route, NSG, firewall or listener blocks the tested path. This concerns a path-by-path diagnosis. Here, a more specific effective route supersedes the expected route.
Question 177
A company needs to centrally define connectivity groups across dozens of VNets. Which Azure networking design most directly satisfies this requirement?
- Enable and monitor Azure DDoS Protection on applicable public-IP VNets
- Link the DNS Private Resolver forwarding ruleset to the required virtual networks
- Use Azure Virtual Network Manager connectivity configurations
- Associate a user-defined route with Virtual appliance next hop
Explanation
Correct Answer
C:Use Azure Virtual Network Manager connectivity configurations addresses the topology, access or delivery requirement in the scenario. Apply it by create network groups and deploy a hub-and-spoke connectivity configuration; confirm by check the effective VNet Manager configuration and cross-group reachability.
Incorrect Answers
A:Enable and monitor Azure DDoS Protection on applicable public-IP VNets. This is relevant when an early warning when its Azure public endpoint is targeted by volumetric attacks. Instead, use Azure Virtual Network Manager connectivity configurations.
B:Link the DNS Private Resolver forwarding ruleset to the required virtual networks. This concerns a private DNS forwarding ruleset available to multiple spokes. Instead, use Azure Virtual Network Manager connectivity configurations.
D:Associate a user-defined route with Virtual appliance next hop. This concerns using a specific next hop. Instead, use Azure Virtual Network Manager connectivity configurations.
Question 178
A company needs to centrally define connectivity groups across dozens of VNets. The architecture uses this design: Use Azure Virtual Network Manager connectivity configurations. Which configuration should the engineer apply to implement it?
- Create network groups and deploy a hub-and-spoke connectivity configuration
- Create the public IP prefix in the intended region and create addresses from it
- Create an Azure public DNS TXT record set containing the token string
- Peer each spoke to the hub and route intended east-west prefixes via NVA
Explanation
Correct Answer
A:Create network groups and deploy a hub-and-spoke connectivity configuration is the operational configuration for use azure virtual network manager connectivity configurations. The acceptance test is to check the effective VNet Manager configuration and cross-group reachability.
Incorrect Answers
B:Create the public IP prefix in the intended region and create addresses from it is a concrete step for allocate a standard public ip prefix and draw public ips from the prefix. Here the selected design is use azure virtual network manager connectivity configurations, which instead requires create network groups and deploy a hub-and-spoke connectivity configuration.
C:Create an Azure public DNS TXT record set containing the token string is a concrete step for publish a txt record at the provider-required dns name. Here the selected design is use azure virtual network manager connectivity configurations, which instead requires create network groups and deploy a hub-and-spoke connectivity configuration.
D:Peer each spoke to the hub and route intended east-west prefixes via NVA is a concrete step for create hub-spoke vnet peerings with udrs through the hub inspection nva. Here the selected design is use azure virtual network manager connectivity configurations, which instead requires create network groups and deploy a hub-and-spoke connectivity configuration.
Question 179
A company needs to centrally define connectivity groups across dozens of VNets. After the team applies this change—create network groups and deploy a hub-and-spoke connectivity configuration—which validation best proves the intended result?
- Inspect reachability and the hop or issue identified
- Inspect effective routes in the spoke for on-premises prefixes via the hub
- Resolve each environment FQDN and confirm no cross-environment target
- Check the effective VNet Manager configuration and cross-group reachability
Explanation
Correct Answer
D:Check the effective VNet Manager configuration and cross-group reachability directly checks whether the intended outcome occurs, not merely whether a resource exists. If the check fails, investigate whether the configuration was not deployed or its membership is incorrect.
Incorrect Answers
A:Inspect reachability and the hop or issue identified. This concerns a path-by-path diagnosis. Instead, check the effective VNet Manager configuration and cross-group reachability.
B:Inspect effective routes in the spoke for on-premises prefixes via the hub. This concerns using the hub's vpn gateway to communicate with an on-premises network. Instead, check the effective VNet Manager configuration and cross-group reachability.
C:Resolve each environment FQDN and confirm no cross-environment target. This concerns using separate DNS names for production and nonproduction endpoints. Instead, check the effective VNet Manager configuration and cross-group reachability.
Question 180
A company needs to centrally define connectivity groups across dozens of VNets. During acceptance testing, a new VNet is not connected when added to the managed network group. Which underlying configuration problem best explains the symptom?
- The configuration was not deployed or its membership is incorrect
- DDoS protection scope or alert configuration is missing
- The platform subnet name or required sizing is incorrect
- Custom DNS configuration was not applied to the VM's resolver
Explanation
Correct Answer
A:The configuration was not deployed or its membership is incorrect explains the observed failure: a new VNet is not connected when added to the managed network group. Correct the design by using use Azure Virtual Network Manager connectivity configurations, implemented through create network groups and deploy a hub-and-spoke connectivity configuration.
Incorrect Answers
B:DDoS protection scope or alert configuration is missing. This is relevant when an early warning when its azure public endpoint is targeted by volumetric attacks. Here, the configuration was not deployed or its membership is incorrect.
C:The platform subnet name or required sizing is incorrect. This concerns a company expects several firewalls, gateways, and bastion services to use separate platform subnets. Here, the configuration was not deployed or its membership is incorrect.
D:Custom DNS configuration was not applied to the VM's resolver. This is relevant when a VNet uses an on-premises domain controller for DNS and a new vm still queries azure platform DNS. Here, the configuration was not deployed or its membership is incorrect.
Designing and Implementing Microsoft Azure Networking Solutions (AZ-700) Practice Tests