Microsoft AZ-700 Exam Dumps, Practice Test Questions

100% Latest & Updated Microsoft AZ-700 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!

Microsoft AZ-700 Premium Bundle
$79.97
$59.98

AZ-700 Premium Bundle

  • Premium File: 406 Questions & Answers. Last update: Nov 12, 2026
  • Training Course: 64 Video Lectures
  • Study Guide: 762 Pages
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates

AZ-700 Premium Bundle

Microsoft AZ-700 Premium Bundle
  • Premium File: 406 Questions & Answers. Last update: Nov 12, 2026
  • Training Course: 64 Video Lectures
  • Study Guide: 762 Pages
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates
$79.97
$59.98

Microsoft AZ-700 Practice Test 28

Question 270

A baseline audit needs tracking of VNet peering changes across subscriptions. The architecture uses this design: Enable Activity Log and central diagnostic retention for network control-plane events. Which configuration should the engineer apply to implement it?

  1. Set primary and secondary DNS server addresses and validate route reachability
  2. Start a diagnostic from source VM to target IP and port
  3. Route subscription Activity Log events to an approved Log Analytics workspace
  4. Select the subnet in the route table Subnets association settings

Explanation

Correct Answer

C:

Route subscription Activity Log events to an approved Log Analytics workspace is the operational configuration for enable activity log and central diagnostic retention for network control-plane events. The acceptance test is to query peering write operations and the caller in retained logs.

Incorrect Answers

A:

Set primary and secondary DNS server addresses and validate route reachability is a concrete step for configure multiple reachable custom dns server ips for the vnet. Here the selected design is enable activity log and central diagnostic retention for network control-plane events, which instead requires route subscription activity log events to an approved log analytics workspace.

B:

Start a diagnostic from source VM to target IP and port is a concrete step for use network watcher connection troubleshoot. Here the selected design is enable activity log and central diagnostic retention for network control-plane events, which instead requires route subscription activity log events to an approved log analytics workspace.

D:

Select the subnet in the route table Subnets association settings is a concrete step for associate the route table with the vm's subnet. Here the selected design is enable activity log and central diagnostic retention for network control-plane events, which instead requires route subscription activity log events to an approved log analytics workspace.

Question 271

A baseline audit needs tracking of VNet peering changes across subscriptions. After the team applies this change—route subscription Activity Log events to an approved Log Analytics workspace—which validation best proves the intended result?

  1. Query peering write operations and the caller in retained logs
  2. Inspect collected flow records and test an allowed and denied connection
  3. Inspect guest resolver settings and query an AD-integrated name
  4. Create reciprocal peering and verify no overlapping prefixes remain

Explanation

Correct Answer

A:

Query peering write operations and the caller in retained logs directly checks whether the intended outcome occurs, not merely whether a resource exists. If the check fails, investigate whether activity Log retention/export was not configured for the needed period.

Incorrect Answers

B:

Inspect collected flow records and test an allowed and denied connection. This concerns a durable record of permitted and denied VNet traffic. Instead, query peering write operations and the caller in retained logs.

C:

Inspect guest resolver settings and query an AD-integrated name. This is relevant when a VNet uses an on-premises domain controller for DNS and a new vm still queries azure platform DNS. Instead, query peering write operations and the caller in retained logs.

D:

Create reciprocal peering and verify no overlapping prefixes remain. This concerns two peered vnets cannot reach one another because each deploys the same subnet prefix. Instead, query peering write operations and the caller in retained logs.

Question 272

A baseline audit needs tracking of VNet peering changes across subscriptions. During acceptance testing, operators cannot determine who changed peering last week. Which underlying configuration problem best explains the symptom?

  1. Private DNS links were configured only for the first two spokes
  2. Activity Log retention/export was not configured for the needed period
  3. Its NIC is attached to the wrong subnet or not configured
  4. Only one reachable DNS server was configured

Explanation

Correct Answer

B:

Activity Log retention/export was not configured for the needed period explains the observed failure: operators cannot determine who changed peering last week. Correct the design by using enable Activity Log and central diagnostic retention for network control-plane events, implemented through route subscription Activity Log events to an approved Log Analytics workspace.

Incorrect Answers

A:

Private DNS links were configured only for the first two spokes. This concerns a shared hub contains a private DNS zone but only one of three spokes resolves it. Here, activity Log retention/export was not configured for the needed period.

C:

Its NIC is attached to the wrong subnet or not configured. This concerns separating nics for trusted and untrusted network segments. Here, activity Log retention/export was not configured for the needed period.

D:

Only one reachable DNS server was configured. This concerns failover if one resolver is offline. Here, activity Log retention/export was not configured for the needed period.

Question 273

An operations team needs to identify effective network security rules after overlapping NSG associations. Which Azure networking design most directly satisfies this requirement?

  1. Use Network Watcher effective security rules
  2. Attach private DNS zone virtual network links to each required spoke
  3. Enable Activity Log and central diagnostic retention for network control-plane events
  4. Deploy a supported Azure Virtual Network Manager routing configuration

Explanation

Correct Answer

A:

Use Network Watcher effective security rules addresses the topology, access or delivery requirement in the scenario. Apply it by inspect effective rules for the VM NIC including subnet and NIC scope; confirm by compare highest-priority matches against a specified test packet.

Incorrect Answers

B:

Attach private DNS zone virtual network links to each required spoke. This concerns a shared hub contains a Private DNS zone but only one of three spokes resolves it. Instead, use Network Watcher effective security rules.

C:

Enable Activity Log and central diagnostic retention for network control-plane events. This concerns tracking of VNet peering changes across subscriptions. Instead, use Network Watcher effective security rules.

D:

Deploy a supported Azure Virtual Network Manager routing configuration. This is relevant when a large region uses a central routing policy for many hub-spoke links. Instead, use Network Watcher effective security rules.

Question 274

An operations team needs to identify effective network security rules after overlapping NSG associations. The architecture uses this design: Use Network Watcher effective security rules. Which configuration should the engineer apply to implement it?

  1. Configure the NIC IP configuration with an available private address inside its subnet
  2. Inspect attack path graph and exposed network/identity relationships
  3. Inspect effective rules for the VM NIC including subnet and NIC scope
  4. Define a subnet prefix that does not intersect existing subnet ranges

Explanation

Correct Answer

C:

Inspect effective rules for the VM NIC including subnet and NIC scope is the operational configuration for use network watcher effective security rules. The acceptance test is to compare highest-priority matches against a specified test packet.

Incorrect Answers

A:

Configure the NIC IP configuration with an available private address inside its subnet is a concrete step for set the nic's private ip allocation to static in azure. Here the selected design is use network watcher effective security rules, which instead requires inspect effective rules for the vm nic including subnet and nic scope.

B:

Inspect attack path graph and exposed network/identity relationships is a concrete step for use microsoft defender for cloud attack path analysis. Here the selected design is use network watcher effective security rules, which instead requires inspect effective rules for the vm nic including subnet and nic scope.

D:

Define a subnet prefix that does not intersect existing subnet ranges is a concrete step for add a distinct nonoverlapping subnet inside an available vnet prefix. Here the selected design is use network watcher effective security rules, which instead requires inspect effective rules for the vm nic including subnet and nic scope.

Question 275

An operations team needs to identify effective network security rules after overlapping NSG associations. After the team applies this change—inspect effective rules for the VM NIC including subnet and NIC scope—which validation best proves the intended result?

  1. Simulate or observe a threshold breach and confirm notification
  2. Compare highest-priority matches against a specified test packet
  3. Inspect subnet prefixes and provision one test NIC in each
  4. Test a forwarded spoke-to-spoke flow and inspect the NVA session table

Explanation

Correct Answer

B:

Compare highest-priority matches against a specified test packet directly checks whether the intended outcome occurs, not merely whether a resource exists. If the check fails, investigate whether effective security rules from both attachment levels were not considered.

Incorrect Answers

A:

Simulate or observe a threshold breach and confirm notification. This concerns actionable health alerts when expressroute or vpn resources degrade. Instead, compare highest-priority matches against a specified test packet.

C:

Inspect subnet prefixes and provision one test NIC in each. This concerns a migration adds a second application subnet without changing the first application's private ip space. Instead, compare highest-priority matches against a specified test packet.

D:

Test a forwarded spoke-to-spoke flow and inspect the NVA session table. This concerns a hub nva will inspect traffic forwarded between peered vnets. Instead, compare highest-priority matches against a specified test packet.

Question 276

An operations team needs to identify effective network security rules after overlapping NSG associations. During acceptance testing, the operator sees only the subnet NSG and misses a NIC-level denial. Which underlying configuration problem best explains the symptom?

  1. The forwarding ruleset link is missing from the spoke
  2. Its subnet was omitted from the NAT Gateway association
  3. A more specific effective route supersedes the expected route
  4. Effective security rules from both attachment levels were not considered

Explanation

Correct Answer

D:

Effective security rules from both attachment levels were not considered explains the observed failure: the operator sees only the subnet NSG and misses a NIC-level denial. Correct the design by using use Network Watcher effective security rules, implemented through inspect effective rules for the VM NIC including subnet and NIC scope.

Incorrect Answers

A:

The forwarding ruleset link is missing from the spoke. This concerns a private DNS forwarding ruleset available to multiple spokes. Here, effective security rules from both attachment levels were not considered.

B:

Its subnet was omitted from the NAT Gateway association. This concerns outbound public ip assignment from a common address pool for multiple application tiers. Here, effective security rules from both attachment levels were not considered.

C:

A more specific effective route supersedes the expected route. This concerns finding which route an azure vm actually uses after peering and BGP advertisements. Here, effective security rules from both attachment levels were not considered.

Question 277

A service owner wants to watch DNS endpoint reachability, not merely VM CPU health. Which Azure networking design most directly satisfies this requirement?

  1. Enable virtual network flow logs on the supported network scope
  2. Configure hub gateway transit and spoke use-remote-gateways peering options
  3. Deploy a supported Azure Virtual Network Manager routing configuration
  4. Configure targeted connection monitoring for the network endpoint

Explanation

Correct Answer

D:

Configure targeted connection monitoring for the network endpoint addresses the topology, access or delivery requirement in the scenario. Apply it by create a connection monitor test group for the server, port and source agent; confirm by review connection success and latency trends over the relevant period.

Incorrect Answers

A:

Enable virtual network flow logs on the supported network scope. This concerns a durable record of permitted and denied VNet traffic. Instead, configure targeted connection monitoring for the network endpoint.

B:

Configure hub gateway transit and spoke use-remote-gateways peering options. This concerns using the hub's VPN gateway to communicate with an on-premises network. Instead, configure targeted connection monitoring for the network endpoint.

C:

Deploy a supported Azure Virtual Network Manager routing configuration. This is relevant when a large region uses a central routing policy for many hub-spoke links. Instead, configure targeted connection monitoring for the network endpoint.

Question 278

A service owner wants to watch DNS endpoint reachability, not merely VM CPU health. The architecture uses this design: Configure targeted connection monitoring for the network endpoint. Which configuration should the engineer apply to implement it?

  1. Create the private zone and add a virtual network link
  2. Create a connection monitor test group for the server, port and source agent
  3. Create an Azure public DNS TXT record set containing the token string
  4. Enable relevant Azure Monitor network resource metrics and diagnostic settings

Explanation

Correct Answer

B:

Create a connection monitor test group for the server, port and source agent is the operational configuration for configure targeted connection monitoring for the network endpoint. The acceptance test is to review connection success and latency trends over the relevant period.

Incorrect Answers

A:

Create the private zone and add a virtual network link is a concrete step for use an azure private dns zone linked to the relevant vnet. Here the selected design is configure targeted connection monitoring for the network endpoint, which instead requires create a connection monitor test group for the server, port and source agent.

C:

Create an Azure public DNS TXT record set containing the token string is a concrete step for publish a txt record at the provider-required dns name. Here the selected design is configure targeted connection monitoring for the network endpoint, which instead requires create a connection monitor test group for the server, port and source agent.

D:

Enable relevant Azure Monitor network resource metrics and diagnostic settings is a concrete step for use azure monitor network insights and appropriate network telemetry. Here the selected design is configure targeted connection monitoring for the network endpoint, which instead requires create a connection monitor test group for the server, port and source agent.

Question 279

A service owner wants to watch DNS endpoint reachability, not merely VM CPU health. After the team applies this change—create a connection monitor test group for the server, port and source agent—which validation best proves the intended result?

  1. Review listed resources against expected public ingress inventory
  2. Review subnet delegation and validate the platform deployment
  3. Inspect the private endpoint NIC private address and approved connection
  4. Review connection success and latency trends over the relevant period

Explanation

Correct Answer

D:

Review connection success and latency trends over the relevant period directly checks whether the intended outcome occurs, not merely whether a resource exists. If the check fails, investigate whether network endpoint probes were not configured.

Incorrect Answers

A:

Review listed resources against expected public ingress inventory. This concerns inventory-based queries over exposed public network resources. Instead, review connection success and latency trends over the relevant period.

B:

Review subnet delegation and validate the platform deployment. This concerns retaining separation from general-purpose virtual machines. Instead, review connection success and latency trends over the relevant period.

C:

Inspect the private endpoint NIC private address and approved connection. This concerns having an address in a planned network segment. Instead, review connection success and latency trends over the relevant period.

Question 280

A service owner wants to watch DNS endpoint reachability, not merely VM CPU health. During acceptance testing, the dashboard shows green VM CPU while port probes fail. Which underlying configuration problem best explains the symptom?

  1. Network endpoint probes were not configured
  2. Public IP resources were not allocated from the reserved prefix
  3. One direction of VNet peering or the effective network policy is missing
  4. The network path, policy or destination listener prevents connectivity

Explanation

Correct Answer

A:

Network endpoint probes were not configured explains the observed failure: the dashboard shows green VM CPU while port probes fail. Correct the design by using configure targeted connection monitoring for the network endpoint, implemented through create a connection monitor test group for the server, port and source agent.

Incorrect Answers

B:

Public IP resources were not allocated from the reserved prefix. This concerns providing a contiguous block of predictable azure public ips for partner firewall allowlists. The requested service or concept is Network endpoint probes were not configured.

C:

One direction of VNet peering or the effective network policy is missing. This concerns two azure vnets in the same tenant require private low-latency connectivity without routing through the internet. The requested service or concept is Network endpoint probes were not configured.

D:

The network path, policy or destination listener prevents connectivity. This concerns a transient connectivity assessment from a vm to an external destination. The requested service or concept is Network endpoint probes were not configured.

Designing and Implementing Microsoft Azure Networking Solutions (AZ-700) Practice Tests

UP

SPECIAL OFFER: GET 10% OFF

This is ONE TIME OFFER

ExamSnap Discount Offer
Enter Your Email Address to Receive Your 10% Off Discount Code

A confirmation link will be sent to this email address to verify your login. *We value your privacy. We will not rent or sell your email address.

Download Free Demo of VCE Exam Simulator

Experience Avanset VCE Exam Simulator for yourself.

Simply submit your e-mail address below to get started with our interactive software demo of your free trial.

Free Demo Limits: In the demo version you will be able to access only first 5 questions from exam.