100% Latest & Updated Microsoft AZ-700 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!
Question 290
A legacy on-premises IPsec device only supports policy-based traffic selectors. The architecture uses this design: Evaluate policy-based compatibility against Azure VPN Gateway support and requirements. Which configuration should the engineer apply to implement it?
- Set matching encryption, integrity, DH and PFS parameters where supported
- Configure the connection's supported policy-based traffic selectors when required
- Create the virtual hub VPN gateway and configure VPN sites and connections
- Choose an eligible ExpressRoute SKU/add-on for required geographic reach
Explanation
Correct Answer
B:Configure the connection's supported policy-based traffic selectors when required is the operational configuration for evaluate policy-based compatibility against azure vpn gateway support and requirements. The acceptance test is to inspect negotiated selectors and confirm required prefixes pass.
Incorrect Answers
A:Set matching encryption, integrity, DH and PFS parameters where supported is a concrete step for align both ends on a supported ike/ipsec policy. Here the selected design is evaluate policy-based compatibility against azure vpn gateway support and requirements, which instead requires configure the connection's supported policy-based traffic selectors when required.
C:Create the virtual hub VPN gateway and configure VPN sites and connections is a concrete step for deploy a site-to-site vpn gateway inside the virtual wan virtual hub. Here the selected design is evaluate policy-based compatibility against azure vpn gateway support and requirements, which instead requires configure the connection's supported policy-based traffic selectors when required.
D:Choose an eligible ExpressRoute SKU/add-on for required geographic reach is a concrete step for evaluate expressroute premium and global reach coverage requirements. Here the selected design is evaluate policy-based compatibility against azure vpn gateway support and requirements, which instead requires configure the connection's supported policy-based traffic selectors when required.
Question 291
A legacy on-premises IPsec device only supports policy-based traffic selectors. After the team applies this change—configure the connection's supported policy-based traffic selectors when required—which validation best proves the intended result?
- Inspect virtual hub region, address pool and gateway status
- Inspect negotiated selectors and confirm required prefixes pass
- Inspect effective hub routes and simulate allowed and disallowed paths
- Inspect BGP learned routes and test a newly advertised prefix
Explanation
Correct Answer
B:Inspect negotiated selectors and confirm required prefixes pass directly checks whether the intended outcome occurs, not merely whether a resource exists. If the check fails, investigate whether the IPsec traffic selector configuration does not include them.
Incorrect Answers
A:Inspect virtual hub region, address pool and gateway status. This concerns branch connectivity through a managed hub. Instead, inspect negotiated selectors and confirm required prefixes pass.
C:Inspect effective hub routes and simulate allowed and disallowed paths. This concerns controlled inter-hub route propagation. Instead, inspect negotiated selectors and confirm required prefixes pass.
D:Inspect BGP learned routes and test a newly advertised prefix. This concerns advertising and learn routes dynamically across a routed vpn. Instead, inspect negotiated selectors and confirm required prefixes pass.
Question 292
A legacy on-premises IPsec device only supports policy-based traffic selectors. During acceptance testing, only a subset of destination CIDRs traverses the tunnel. Which underlying configuration problem best explains the symptom?
- The circuit tier does not permit the requested geographic reach
- Point-to-site address pool or gateway P2S configuration is missing
- Private ExpressRoute transport alone does not provide encryption
- The IPsec traffic selector configuration does not include them
Explanation
Correct Answer
D:The IPsec traffic selector configuration does not include them explains the observed failure: only a subset of destination CIDRs traverses the tunnel. Correct the design by using evaluate policy-based compatibility against Azure VPN Gateway support and requirements, implemented through configure the connection's supported policy-based traffic selectors when required.
Incorrect Answers
A:The circuit tier does not permit the requested geographic reach. This concerns expressroute connectivity between distant geopolitical regions. Here, the IPsec traffic selector configuration does not include them.
B:Point-to-site address pool or gateway P2S configuration is missing. This concerns remote consultants require per-user encrypted vpn access without maintaining a site router. Here, the IPsec traffic selector configuration does not include them.
C:Private ExpressRoute transport alone does not provide encryption. This is relevant when a private circuit but also requires cryptographic encryption in transit. Here, the IPsec traffic selector configuration does not include them.
Question 293
A network engineer must select a VPN Gateway SKU for expected throughput and resiliency. Which Azure networking design most directly satisfies this requirement?
- Use ExpressRoute Global Reach where supported
- Add a point-to-site User VPN gateway to the Virtual WAN hub
- Use VPN Gateway diagnostic logs and tunnel metrics
- Choose a supported VpnGw gateway generation/SKU based on documented scale needs
Explanation
Correct Answer
D:Choose a supported VpnGw gateway generation/SKU based on documented scale needs addresses the topology, access or delivery requirement in the scenario. Apply it by deploy an eligible VPN gateway SKU and select required zone redundancy options; confirm by compare actual connection count and throughput with the selected tier.
Incorrect Answers
A:Use ExpressRoute Global Reach where supported. This concerns two on-premises offices each have ExpressRoute circuits and must communicate privately through Microsoft backbone when supported. Instead, choose a supported VpnGw gateway generation/SKU based on documented scale needs.
B:Add a point-to-site User VPN gateway to the Virtual WAN hub. This concerns remote employees need user VPN access through the managed global WAN. Instead, choose a supported VpnGw gateway generation/SKU based on documented scale needs.
C:Use VPN Gateway diagnostic logs and tunnel metrics. This is relevant when a VPN gateway connection becomes unstable and the operator needs diagnostics. Instead, choose a supported VpnGw gateway generation/SKU based on documented scale needs.
Question 294
A network engineer must select a VPN Gateway SKU for expected throughput and resiliency. The architecture uses this design: Choose a supported VpnGw gateway generation/SKU based on documented scale needs. Which configuration should the engineer apply to implement it?
- Enable gateway diagnostic categories and review connection events
- Download the VPN profile after gateway and P2S settings are complete
- Deploy an eligible VPN gateway SKU and select required zone redundancy options
- Configure Microsoft peering BGP and route filtering as required
Explanation
Correct Answer
C:Deploy an eligible VPN gateway SKU and select required zone redundancy options is the operational configuration for choose a supported vpngw gateway generation/sku based on documented scale needs. The acceptance test is to compare actual connection count and throughput with the selected tier.
Incorrect Answers
A:Enable gateway diagnostic categories and review connection events is a concrete step for use vpn gateway diagnostic logs and tunnel metrics. Here the selected design is choose a supported vpngw gateway generation/sku based on documented scale needs, which instead requires deploy an eligible vpn gateway sku and select required zone redundancy options.
B:Download the VPN profile after gateway and P2S settings are complete is a concrete step for regenerate and distribute the current vpn client configuration profile. Here the selected design is choose a supported vpngw gateway generation/sku based on documented scale needs, which instead requires deploy an eligible vpn gateway sku and select required zone redundancy options.
D:Configure Microsoft peering BGP and route filtering as required is a concrete step for choose microsoft peering only when its supported service requirements apply. Here the selected design is choose a supported vpngw gateway generation/sku based on documented scale needs, which instead requires deploy an eligible vpn gateway sku and select required zone redundancy options.
Question 295
A network engineer must select a VPN Gateway SKU for expected throughput and resiliency. After the team applies this change—deploy an eligible VPN gateway SKU and select required zone redundancy options—which validation best proves the intended result?
- Compare actual connection count and throughput with the selected tier
- Inspect the connection's effective routes and remote hub prefixes
- Correlate disconnect timestamps with tunnel or IKE errors
- Resolve a private hostname after connection and confirm its private answer
Explanation
Correct Answer
A:Compare actual connection count and throughput with the selected tier directly checks whether the intended outcome occurs, not merely whether a resource exists. If the check fails, investigate whether the selected VPN Gateway SKU was undersized or incompatible.
Incorrect Answers
B:Inspect the connection's effective routes and remote hub prefixes. This is relevant when a virtual hub is connected to many vnets but one spoke is missing remote routes. Instead, compare actual connection count and throughput with the selected tier.
C:Correlate disconnect timestamps with tunnel or IKE errors. This is relevant when a vpn gateway connection becomes unstable and the operator needs diagnostics. Instead, compare actual connection count and throughput with the selected tier.
D:Resolve a private hostname after connection and confirm its private answer. This is relevant when an employee is connected to azure vpn but private DNS names are not resolving. Instead, compare actual connection count and throughput with the selected tier.
Question 296
A network engineer must select a VPN Gateway SKU for expected throughput and resiliency. During acceptance testing, the gateway fails scale or throughput requirements. Which underlying configuration problem best explains the symptom?
- The gateway cannot reach the RADIUS endpoint or the shared secret differs
- The failure lies in BGP or gateway linkage rather than circuit resource existence
- Point-to-site address pool or gateway P2S configuration is missing
- The selected VPN Gateway SKU was undersized or incompatible
Explanation
Correct Answer
D:The selected VPN Gateway SKU was undersized or incompatible explains the observed failure: the gateway fails scale or throughput requirements. Correct the design by using choose a supported VpnGw gateway generation/SKU based on documented scale needs, implemented through deploy an eligible VPN gateway SKU and select required zone redundancy options.
Incorrect Answers
A:The gateway cannot reach the RADIUS endpoint or the shared secret differs. This concerns a central radius service to validate users. Here, the selected VPN Gateway SKU was undersized or incompatible.
B:The failure lies in BGP or gateway linkage rather than circuit resource existence. This is relevant when a team is troubleshooting a circuit that is not passing traffic after handoff. Here, the selected VPN Gateway SKU was undersized or incompatible.
C:Point-to-site address pool or gateway P2S configuration is missing. This concerns remote consultants require per-user encrypted vpn access without maintaining a site router. Here, the selected VPN Gateway SKU was undersized or incompatible.
Question 297
A branch router's public address and internal network range must be represented in Azure. Which Azure networking design most directly satisfies this requirement?
- Create a local network gateway with correct site address and prefixes
- Deploy an Azure point-to-site VPN configuration
- Use VPN Gateway diagnostic logs and tunnel metrics
- Coordinate the correct customer and Microsoft BGP ASN parameters
Explanation
Correct Answer
A:Create a local network gateway with correct site address and prefixes addresses the topology, access or delivery requirement in the scenario. Apply it by configure remote public VPN endpoint and its reachable on-premises network CIDRs; confirm by inspect local network gateway definitions against the router configuration.
Incorrect Answers
B:Deploy an Azure point-to-site VPN configuration. This concerns remote consultants require per-user encrypted VPN access without maintaining a site router. Instead, create a local network gateway with correct site address and prefixes.
C:Use VPN Gateway diagnostic logs and tunnel metrics. This is relevant when a VPN gateway connection becomes unstable and the operator needs diagnostics. Instead, create a local network gateway with correct site address and prefixes.
D:Coordinate the correct customer and Microsoft BGP ASN parameters. This concerns BGP routing over ExpressRoute fails after the customer changes its ASN. Instead, create a local network gateway with correct site address and prefixes.
Question 298
A branch router's public address and internal network range must be represented in Azure. The architecture uses this design: Create a local network gateway with correct site address and prefixes. Which configuration should the engineer apply to implement it?
- Configure remote public VPN endpoint and its reachable on-premises network CIDRs
- Configure peer ASN/BGP addresses and BGP on the connection
- Set nonoverlapping P2S CIDRs and update/reimport affected profiles
- Configure Microsoft peering BGP and route filtering as required
Explanation
Correct Answer
A:Configure remote public VPN endpoint and its reachable on-premises network CIDRs is the operational configuration for create a local network gateway with correct site address and prefixes. The acceptance test is to inspect local network gateway definitions against the router configuration.
Incorrect Answers
B:Configure peer ASN/BGP addresses and BGP on the connection is a concrete step for enable bgp with supported gateway and customer edge configuration. Here the selected design is create a local network gateway with correct site address and prefixes, which instead requires configure remote public vpn endpoint and its reachable on-premises network cidrs.
C:Set nonoverlapping P2S CIDRs and update/reimport affected profiles is a concrete step for allocate a distinct p2s client address pool that does not overlap remote networks. Here the selected design is create a local network gateway with correct site address and prefixes, which instead requires configure remote public vpn endpoint and its reachable on-premises network cidrs.
D:Configure Microsoft peering BGP and route filtering as required is a concrete step for choose microsoft peering only when its supported service requirements apply. Here the selected design is create a local network gateway with correct site address and prefixes, which instead requires configure remote public vpn endpoint and its reachable on-premises network cidrs.
Question 299
A branch router's public address and internal network range must be represented in Azure. After the team applies this change—configure remote public VPN endpoint and its reachable on-premises network CIDRs—which validation best proves the intended result?
- Inspect local network gateway definitions against the router configuration
- Bring down one BGP peer and inspect remaining reachability
- Inspect IKE negotiation diagnostics and re-establish the tunnel
- Inspect the connection's effective routes and remote hub prefixes
Explanation
Correct Answer
A:Inspect local network gateway definitions against the router configuration directly checks whether the intended outcome occurs, not merely whether a resource exists. If the check fails, investigate whether local network gateway address prefixes are wrong.
Incorrect Answers
B:Bring down one BGP peer and inspect remaining reachability. This concerns providing redundant paths through two independent peering sessions. Instead, inspect local network gateway definitions against the router configuration.
C:Inspect IKE negotiation diagnostics and re-establish the tunnel. This is relevant when a corporate IPSEC tunnel negotiation fails because peers support different cryptographic suites. Instead, inspect local network gateway definitions against the router configuration.
D:Inspect the connection's effective routes and remote hub prefixes. This is relevant when a virtual hub is connected to many vnets but one spoke is missing remote routes. Instead, inspect local network gateway definitions against the router configuration.
Question 300
A branch router's public address and internal network range must be represented in Azure. During acceptance testing, the tunnel connects but on-premises subnets remain unreachable. Which underlying configuration problem best explains the symptom?
- The failure lies in BGP or gateway linkage rather than circuit resource existence
- Local network gateway address prefixes are wrong
- User VPN gateway or client authentication configuration is incomplete
- The gateway cannot reach the RADIUS endpoint or the shared secret differs
Explanation
Correct Answer
B:Local network gateway address prefixes are wrong explains the observed failure: the tunnel connects but on-premises subnets remain unreachable. Correct the design by using create a local network gateway with correct site address and prefixes, implemented through configure remote public VPN endpoint and its reachable on-premises network CIDRs.
Incorrect Answers
A:The failure lies in BGP or gateway linkage rather than circuit resource existence. This is relevant when a team is troubleshooting a circuit that is not passing traffic after handoff. Here, local network gateway address prefixes are wrong.
C:User VPN gateway or client authentication configuration is incomplete. This concerns remote employees need user vpn access through the managed global wan. Here, local network gateway address prefixes are wrong.
D:The gateway cannot reach the RADIUS endpoint or the shared secret differs. This concerns a central radius service to validate users. Here, local network gateway address prefixes are wrong.
Designing and Implementing Microsoft Azure Networking Solutions (AZ-700) Practice Tests