Microsoft AZ-700 Exam Dumps, Practice Test Questions

100% Latest & Updated Microsoft AZ-700 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!

Microsoft AZ-700 Premium Bundle
$79.97
$59.98

AZ-700 Premium Bundle

  • Premium File: 406 Questions & Answers. Last update: Nov 12, 2026
  • Training Course: 64 Video Lectures
  • Study Guide: 762 Pages
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates

AZ-700 Premium Bundle

Microsoft AZ-700 Premium Bundle
  • Premium File: 406 Questions & Answers. Last update: Nov 12, 2026
  • Training Course: 64 Video Lectures
  • Study Guide: 762 Pages
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates
$79.97
$59.98

Microsoft AZ-700 Practice Test 34

Question 330

A VPN gateway connection becomes unstable and the operator needs diagnostics. The architecture uses this design: Use VPN Gateway diagnostic logs and tunnel metrics. Which configuration should the engineer apply to implement it?

  1. Change the local network gateway's gateway IP and coordinate remote settings
  2. Set the connection's route table association and propagation labels correctly
  3. Create a User VPN configuration and associate it with the virtual hub User VPN gateway
  4. Enable gateway diagnostic categories and review connection events

Explanation

Correct Answer

D:

Enable gateway diagnostic categories and review connection events is the operational configuration for use vpn gateway diagnostic logs and tunnel metrics. The acceptance test is to correlate disconnect timestamps with tunnel or IKE errors.

Incorrect Answers

A:

Change the local network gateway's gateway IP and coordinate remote settings is a concrete step for update the corresponding local network gateway public ip endpoint. Here the selected design is use vpn gateway diagnostic logs and tunnel metrics, which instead requires enable gateway diagnostic categories and review connection events.

B:

Set the connection's route table association and propagation labels correctly is a concrete step for review the virtual wan vnet connection association and propagation settings. Here the selected design is use vpn gateway diagnostic logs and tunnel metrics, which instead requires enable gateway diagnostic categories and review connection events.

C:

Create a User VPN configuration and associate it with the virtual hub User VPN gateway is a concrete step for add a point-to-site user vpn gateway to the virtual wan hub. Here the selected design is use vpn gateway diagnostic logs and tunnel metrics, which instead requires enable gateway diagnostic categories and review connection events.

Question 331

A VPN gateway connection becomes unstable and the operator needs diagnostics. After the team applies this change—enable gateway diagnostic categories and review connection events—which validation best proves the intended result?

  1. Sign in with a test identity and confirm token-based access
  2. Compare actual connection count and throughput with the selected tier
  3. Correlate disconnect timestamps with tunnel or IKE errors
  4. Connect with an issued client certificate and reject an untrusted cert

Explanation

Correct Answer

C:

Correlate disconnect timestamps with tunnel or IKE errors directly checks whether the intended outcome occurs, not merely whether a resource exists. If the check fails, investigate whether vPN diagnostic logs or peer IKE error records were not collected.

Incorrect Answers

A:

Sign in with a test identity and confirm token-based access. This concerns microsoft entra authentication for user vpn clients. Here, correlate disconnect timestamps with tunnel or IKE errors.

B:

Compare actual connection count and throughput with the selected tier. This concerns selecting a vpn gateway sku for expected throughput and resiliency. Here, correlate disconnect timestamps with tunnel or IKE errors.

D:

Connect with an issued client certificate and reject an untrusted cert. This concerns device certificates from a private pki. Here, correlate disconnect timestamps with tunnel or IKE errors.

Question 332

A VPN gateway connection becomes unstable and the operator needs diagnostics. During acceptance testing, repeated reconnects have no actionable failure cause. Which underlying configuration problem best explains the symptom?

  1. The issuer/audience/tenant values are misconfigured
  2. VPN diagnostic logs or peer IKE error records were not collected
  3. Inconsistent BGP advertisement or preference causes asymmetry
  4. The Virtual WAN route table propagation excludes the spoke

Explanation

Correct Answer

B:

VPN diagnostic logs or peer IKE error records were not collected explains the observed failure: repeated reconnects have no actionable failure cause. Correct the design by using use VPN Gateway diagnostic logs and tunnel metrics, implemented through enable gateway diagnostic categories and review connection events.

Incorrect Answers

A:

The issuer/audience/tenant values are misconfigured. This concerns microsoft entra authentication for user vpn clients. The relevant SQL or system operation is VPN diagnostic logs or peer IKE error records were not collected.

C:

Inconsistent BGP advertisement or preference causes asymmetry. This concerns on-premises prefixes are learned in azure but return routes take another connectivity path. The relevant SQL or system operation is VPN diagnostic logs or peer IKE error records were not collected.

D:

The Virtual WAN route table propagation excludes the spoke. This is relevant when a virtual hub is connected to many vnets but one spoke is missing remote routes. The relevant SQL or system operation is VPN diagnostic logs or peer IKE error records were not collected.

Question 333

An existing branch VPN must avoid dropping traffic when Azure performs gateway maintenance. Which Azure networking design most directly satisfies this requirement?

  1. Use supported Virtual WAN NVA integration rather than an arbitrary subnet VM route
  2. Add an encryption overlay where supported instead of assuming ExpressRoute is encrypted
  3. Update the corresponding local network gateway public IP endpoint
  4. Use a supported zone-redundant or active-active VPN Gateway design

Explanation

Correct Answer

D:

Use a supported zone-redundant or active-active VPN Gateway design addresses the topology, access or delivery requirement in the scenario. Apply it by select applicable zone redundant gateway settings and configure peer reachability; confirm by validate both gateway instances and test traffic continuity during a failover.

Incorrect Answers

A:

Use supported Virtual WAN NVA integration rather than an arbitrary subnet VM route. This concerns a third-party network virtual appliance inserted into Virtual WAN traffic paths. Instead, use a supported zone-redundant or active-active VPN Gateway design.

B:

Add an encryption overlay where supported instead of assuming ExpressRoute is encrypted. This is relevant when a private circuit but also requires cryptographic encryption in transit. Instead, use a supported zone-redundant or active-active VPN Gateway design.

C:

Update the corresponding local network gateway public IP endpoint. This is relevant when a company is moving its site-to-site tunnel to a different on-premises public address. Instead, use a supported zone-redundant or active-active VPN Gateway design.

Question 334

An existing branch VPN must avoid dropping traffic when Azure performs gateway maintenance. The architecture uses this design: Use a supported zone-redundant or active-active VPN Gateway design. Which configuration should the engineer apply to implement it?

  1. Configure the P2S tunnel type and matching VPN client support
  2. Select applicable zone redundant gateway settings and configure peer reachability
  3. Enable gateway diagnostic categories and review connection events
  4. Configure Microsoft peering BGP and route filtering as required

Explanation

Correct Answer

B:

Select applicable zone redundant gateway settings and configure peer reachability is the operational configuration for use a supported zone-redundant or active-active vpn gateway design. The acceptance test is to validate both gateway instances and test traffic continuity during a failover.

Incorrect Answers

A:

Configure the P2S tunnel type and matching VPN client support is a concrete step for select supported openvpn or ikev2 according to platform and auth requirements. Here the selected design is use a supported zone-redundant or active-active vpn gateway design, which instead requires select applicable zone redundant gateway settings and configure peer reachability.

C:

Enable gateway diagnostic categories and review connection events is a concrete step for use vpn gateway diagnostic logs and tunnel metrics. Here the selected design is use a supported zone-redundant or active-active vpn gateway design, which instead requires select applicable zone redundant gateway settings and configure peer reachability.

D:

Configure Microsoft peering BGP and route filtering as required is a concrete step for choose microsoft peering only when its supported service requirements apply. Here the selected design is use a supported zone-redundant or active-active vpn gateway design, which instead requires select applicable zone redundant gateway settings and configure peer reachability.

Question 335

An existing branch VPN must avoid dropping traffic when Azure performs gateway maintenance. After the team applies this change—select applicable zone redundant gateway settings and configure peer reachability—which validation best proves the intended result?

  1. Test private connectivity between the two customer sites
  2. Verify learned private prefixes on both BGP sessions
  3. Validate both gateway instances and test traffic continuity during a failover
  4. Disconnect one ISP and verify traffic can use the remaining tunnel

Explanation

Correct Answer

C:

Validate both gateway instances and test traffic continuity during a failover directly checks whether the intended outcome occurs, not merely whether a resource exists. If the check fails, investigate whether the deployed SKU or tunnel topology lacks required redundancy.

Incorrect Answers

A:

Test private connectivity between the two customer sites. This concerns two on-premises offices each have expressroute circuits and must communicate privately through microsoft backbone when supported. Here, validate both gateway instances and test traffic continuity during a failover.

B:

Verify learned private prefixes on both BGP sessions. This concerns exchange private azure VNet routes over expressroute. Here, validate both gateway instances and test traffic continuity during a failover.

D:

Disconnect one ISP and verify traffic can use the remaining tunnel. This is relevant when a branch uses two different internet providers and wants vpn failover. Here, validate both gateway instances and test traffic continuity during a failover.

Question 336

An existing branch VPN must avoid dropping traffic when Azure performs gateway maintenance. During acceptance testing, a gateway instance failure causes complete interruption. Which underlying configuration problem best explains the symptom?

  1. The required Microsoft peering or route filter is missing
  2. The chosen tunnel protocol or client is unsupported for that platform
  3. The client route profile lacks the spoke destination prefix
  4. The deployed SKU or tunnel topology lacks required redundancy

Explanation

Correct Answer

D:

The deployed SKU or tunnel topology lacks required redundancy explains the observed failure: a gateway instance failure causes complete interruption. Correct the design by using use a supported zone-redundant or active-active VPN Gateway design, implemented through select applicable zone redundant gateway settings and configure peer reachability.

Incorrect Answers

A:

The required Microsoft peering or route filter is missing. This concerns microsoft peering to reach applicable microsoft public service prefixes. Here, the deployed SKU or tunnel topology lacks required redundancy.

B:

The chosen tunnel protocol or client is unsupported for that platform. This concerns using an approved tunnel protocol for mobile remote-user connectivity. Here, the deployed SKU or tunnel topology lacks required redundancy.

C:

The client route profile lacks the spoke destination prefix. This is relevant when a vpn user can reach the hub VNet but cannot access a connected spoke. Here, the deployed SKU or tunnel topology lacks required redundancy.

Question 337

Remote consultants require per-user encrypted VPN access without maintaining a site router. Which Azure networking design most directly satisfies this requirement?

  1. Deploy an Azure point-to-site VPN configuration
  2. Create a local network gateway with correct site address and prefixes
  3. Choose a supported OpenVPN P2S configuration with Microsoft Entra ID
  4. Evaluate policy-based compatibility against Azure VPN Gateway support and requirements

Explanation

Correct Answer

A:

Deploy an Azure point-to-site VPN configuration addresses the topology, access or delivery requirement in the scenario. Apply it by configure the VPN gateway P2S address pool, tunnel protocol and client authentication; confirm by install a client profile and connect from an external device.

Incorrect Answers

B:

Create a local network gateway with correct site address and prefixes. This concerns being represented in Azure. Instead, deploy an Azure point-to-site VPN configuration.

C:

Choose a supported OpenVPN P2S configuration with Microsoft Entra ID. This concerns Microsoft Entra authentication for user VPN clients. Instead, deploy an Azure point-to-site VPN configuration.

D:

Evaluate policy-based compatibility against Azure VPN Gateway support and requirements. This concerns a legacy on-premises IPSEC device only supports policy-based traffic selectors. Instead, deploy an Azure point-to-site VPN configuration.

Question 338

Remote consultants require per-user encrypted VPN access without maintaining a site router. The architecture uses this design: Deploy an Azure point-to-site VPN configuration. Which configuration should the engineer apply to implement it?

  1. Configure the VPN gateway P2S address pool, tunnel protocol and client authentication
  2. Set tenant, audience and issuer parameters and use the Azure VPN Client
  3. Use supported gateway SKU and enable FastPath on the eligible connection
  4. Configure Microsoft peering BGP and route filtering as required

Explanation

Correct Answer

A:

Configure the VPN gateway P2S address pool, tunnel protocol and client authentication is the operational configuration for deploy an azure point-to-site vpn configuration. The acceptance test is to install a client profile and connect from an external device.

Incorrect Answers

B:

Set tenant, audience and issuer parameters and use the Azure VPN Client is a concrete step for choose a supported openvpn p2s configuration with microsoft entra id. Here the selected design is deploy an azure point-to-site vpn configuration, which instead requires configure the vpn gateway p2s address pool, tunnel protocol and client authentication.

C:

Use supported gateway SKU and enable FastPath on the eligible connection is a concrete step for consider expressroute fastpath on supported gateway and circuit combinations. Here the selected design is deploy an azure point-to-site vpn configuration, which instead requires configure the vpn gateway p2s address pool, tunnel protocol and client authentication.

D:

Configure Microsoft peering BGP and route filtering as required is a concrete step for choose microsoft peering only when its supported service requirements apply. Here the selected design is deploy an azure point-to-site vpn configuration, which instead requires configure the vpn gateway p2s address pool, tunnel protocol and client authentication.

Question 339

Remote consultants require per-user encrypted VPN access without maintaining a site router. After the team applies this change—configure the VPN gateway P2S address pool, tunnel protocol and client authentication—which validation best proves the intended result?

  1. Inspect ExpressRoute connection status from the hub and reach target VNets
  2. Install a client profile and connect from an external device
  3. Check physical cross-connect completion and peering status
  4. Test each target device OS with the selected protocol

Explanation

Correct Answer

B:

Install a client profile and connect from an external device directly checks whether the intended outcome occurs, not merely whether a resource exists. If the check fails, investigate whether point-to-site address pool or gateway P2S configuration is missing.

Incorrect Answers

A:

Inspect ExpressRoute connection status from the hub and reach target VNets. This concerns private expressroute access to its global virtual wan topology. Instead, install a client profile and connect from an external device.

C:

Check physical cross-connect completion and peering status. This concerns choosing the correct expressroute connectivity model for a colocation facility. Instead, install a client profile and connect from an external device.

D:

Test each target device OS with the selected protocol. This concerns using an approved tunnel protocol for mobile remote-user connectivity. Instead, install a client profile and connect from an external device.

Question 340

Remote consultants require per-user encrypted VPN access without maintaining a site router. During acceptance testing, the client fails to obtain an address for its P2S tunnel. Which underlying configuration problem best explains the symptom?

  1. The secured hub internet routing intent or association is missing
  2. The IPsec traffic selector configuration does not include them
  3. The local network gateway still references the old endpoint
  4. Point-to-site address pool or gateway P2S configuration is missing

Explanation

Correct Answer

D:

Point-to-site address pool or gateway P2S configuration is missing explains the observed failure: the client fails to obtain an address for its P2S tunnel. Correct the design by using deploy an Azure point-to-site VPN configuration, implemented through configure the VPN gateway P2S address pool, tunnel protocol and client authentication.

Incorrect Answers

A:

The secured hub internet routing intent or association is missing. This concerns secure inspection for all virtual wan internet and private paths. Here, point-to-site address pool or gateway P2S configuration is missing.

B:

The IPsec traffic selector configuration does not include them. This concerns a legacy on-premises IPSEC device only supports policy-based traffic selectors. Here, point-to-site address pool or gateway P2S configuration is missing.

C:

The local network gateway still references the old endpoint. This is relevant when a company is moving its site-to-site tunnel to a different on-premises public address. Here, point-to-site address pool or gateway P2S configuration is missing.

Designing and Implementing Microsoft Azure Networking Solutions (AZ-700) Practice Tests

UP

SPECIAL OFFER: GET 10% OFF

This is ONE TIME OFFER

ExamSnap Discount Offer
Enter Your Email Address to Receive Your 10% Off Discount Code

A confirmation link will be sent to this email address to verify your login. *We value your privacy. We will not rent or sell your email address.

Download Free Demo of VCE Exam Simulator

Experience Avanset VCE Exam Simulator for yourself.

Simply submit your e-mail address below to get started with our interactive software demo of your free trial.

Free Demo Limits: In the demo version you will be able to access only first 5 questions from exam.