100% Latest & Updated Microsoft AZ-700 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!
Question 370
A remote Windows device should connect automatically to corporate resources when policy requires. The architecture uses this design: Evaluate Azure P2S settings against Windows Always On VPN prerequisites. Which configuration should the engineer apply to implement it?
- Configure peer ASN/BGP addresses and BGP on the connection
- Configure a compatible VPN client profile and required device or user tunnel policy
- Choose an eligible ExpressRoute SKU/add-on for required geographic reach
- Set tenant, audience and issuer parameters and use the Azure VPN Client
Explanation
Correct Answer
B:Configure a compatible VPN client profile and required device or user tunnel policy is the operational configuration for evaluate azure p2s settings against windows always on vpn prerequisites. The acceptance test is to test auto-connect after sign-in or network transition.
Incorrect Answers
A:Configure peer ASN/BGP addresses and BGP on the connection is a concrete step for enable bgp with supported gateway and customer edge configuration. Here the selected design is evaluate azure p2s settings against windows always on vpn prerequisites, which instead requires configure a compatible vpn client profile and required device or user tunnel policy.
C:Choose an eligible ExpressRoute SKU/add-on for required geographic reach is a concrete step for evaluate expressroute premium and global reach coverage requirements. Here the selected design is evaluate azure p2s settings against windows always on vpn prerequisites, which instead requires configure a compatible vpn client profile and required device or user tunnel policy.
D:Set tenant, audience and issuer parameters and use the Azure VPN Client is a concrete step for choose a supported openvpn p2s configuration with microsoft entra id. Here the selected design is evaluate azure p2s settings against windows always on vpn prerequisites, which instead requires configure a compatible vpn client profile and required device or user tunnel policy.
Question 371
A remote Windows device should connect automatically to corporate resources when policy requires. After the team applies this change—configure a compatible VPN client profile and required device or user tunnel policy—which validation best proves the intended result?
- Check physical cross-connect completion and peering status
- Connect a pilot client and verify hub-connected VNet access
- Test auto-connect after sign-in or network transition
- Authenticate a test user and inspect the RADIUS server logs
Explanation
Correct Answer
C:Test auto-connect after sign-in or network transition directly checks whether the intended outcome occurs, not merely whether a resource exists. If the check fails, investigate whether always On VPN deployment or client policy is absent.
Incorrect Answers
A:Check physical cross-connect completion and peering status. This concerns choosing the correct expressroute connectivity model for a colocation facility. Instead, test auto-connect after sign-in or network transition.
B:Connect a pilot client and verify hub-connected VNet access. This concerns remote employees need user vpn access through the managed global wan. Instead, test auto-connect after sign-in or network transition.
D:Authenticate a test user and inspect the RADIUS server logs. This concerns a central radius service to validate users. Instead, test auto-connect after sign-in or network transition.
Question 372
A remote Windows device should connect automatically to corporate resources when policy requires. During acceptance testing, the tunnel only starts when a user clicks Connect. Which underlying configuration problem best explains the symptom?
- Always On VPN deployment or client policy is absent
- The BGP peering session or route advertisement is absent
- Route table association or propagation policy is too broad
- User VPN gateway or client authentication configuration is incomplete
Explanation
Correct Answer
A:Always On VPN deployment or client policy is absent explains the observed failure: the tunnel only starts when a user clicks Connect. Correct the design by using evaluate Azure P2S settings against Windows Always On VPN prerequisites, implemented through configure a compatible VPN client profile and required device or user tunnel policy.
Incorrect Answers
B:The BGP peering session or route advertisement is absent. This concerns advertising and learn routes dynamically across a routed vpn. Here, always On VPN deployment or client policy is absent.
C:Route table association or propagation policy is too broad. This concerns controlled inter-hub route propagation. Here, always On VPN deployment or client policy is absent.
D:User VPN gateway or client authentication configuration is incomplete. This concerns remote employees need user vpn access through the managed global wan. Here, always On VPN deployment or client policy is absent.
Question 373
A P2S gateway is configured but a user receives invalid-signature token errors. Which TWO listed choices identify the suitable Azure design and the concrete configuration required to implement it? (Choose TWO.)
- Validate Microsoft Entra application registration and audience alignment
- Validate transit routes, peering and client routing for the remote pool
- Coordinate the correct customer and Microsoft BGP ASN parameters
- Correct tenant/issuer/audience fields in the gateway and client settings
- Create the virtual hub VPN gateway and configure VPN sites and connections
Explanation
Correct Answers
A:Validate Microsoft Entra application registration and audience alignment addresses the topology, access or delivery requirement in the scenario. Apply it by correct tenant/issuer/audience fields in the gateway and client settings; confirm by obtain a new token and verify P2S authentication succeeds.
D:Correct tenant/issuer/audience fields in the gateway and client settings is the operational configuration for validate microsoft entra application registration and audience alignment. The acceptance test is to obtain a new token and verify P2S authentication succeeds.
Incorrect Answers
B:Validate transit routes, peering and client routing for the remote pool. This is relevant when a VPN user can reach the hub VNet but cannot access a connected spoke. Here, validate Microsoft Entra application registration and audience alignment.
C:Coordinate the correct customer and Microsoft BGP ASN parameters. This concerns BGP routing over ExpressRoute fails after the customer changes its ASN. Here, validate Microsoft Entra application registration and audience alignment.
E:Create the virtual hub VPN gateway and configure VPN sites and connections is a concrete step for deploy a site-to-site vpn gateway inside the virtual wan virtual hub. Here the selected design is validate microsoft entra application registration and audience alignment, which instead requires correct tenant/issuer/audience fields in the gateway and client settings.
Question 374
A P2S gateway is configured but a user receives invalid-signature token errors. The architecture uses this design: Validate Microsoft Entra application registration and audience alignment. Which configuration should the engineer apply to implement it?
- Correct tenant/issuer/audience fields in the gateway and client settings
- Use supported gateway SKU and enable FastPath on the eligible connection
- Configure the P2S tunnel type and matching VPN client support
- Create the virtual hub VPN gateway and configure VPN sites and connections
Explanation
Correct Answer
A:Correct tenant/issuer/audience fields in the gateway and client settings is the operational configuration for validate microsoft entra application registration and audience alignment. The acceptance test is to obtain a new token and verify P2S authentication succeeds.
Incorrect Answers
B:Use supported gateway SKU and enable FastPath on the eligible connection is a concrete step for consider expressroute fastpath on supported gateway and circuit combinations. Here the selected design is validate microsoft entra application registration and audience alignment, which instead requires correct tenant/issuer/audience fields in the gateway and client settings.
C:Configure the P2S tunnel type and matching VPN client support is a concrete step for select supported openvpn or ikev2 according to platform and auth requirements. Here the selected design is validate microsoft entra application registration and audience alignment, which instead requires correct tenant/issuer/audience fields in the gateway and client settings.
D:Create the virtual hub VPN gateway and configure VPN sites and connections is a concrete step for deploy a site-to-site vpn gateway inside the virtual wan virtual hub. Here the selected design is validate microsoft entra application registration and audience alignment, which instead requires correct tenant/issuer/audience fields in the gateway and client settings.
Question 375
A P2S gateway is configured but a user receives invalid-signature token errors. After the team applies this change—correct tenant/issuer/audience fields in the gateway and client settings—which validation best proves the intended result?
- Obtain a new token and verify P2S authentication succeeds
- Verify private and internet traffic takes the security policy path
- Import the profile into the correct client and verify endpoint settings
- Fail a simulated tunnel and verify a second connection still passes traffic
Explanation
Correct Answer
A:Obtain a new token and verify P2S authentication succeeds directly checks whether the intended outcome occurs, not merely whether a resource exists. If the check fails, investigate whether entra issuer or audience configuration does not match the client token.
Incorrect Answers
B:Verify private and internet traffic takes the security policy path. This concerns secure inspection for all virtual wan internet and private paths. Here, obtain a new token and verify P2S authentication succeeds.
C:Import the profile into the correct client and verify endpoint settings. This concerns a user requests a p2s vpn configuration but the client remains unable to import the settings. Here, obtain a new token and verify P2S authentication succeeds.
D:Fail a simulated tunnel and verify a second connection still passes traffic. This concerns two branch vpn devices should both be able to provide resilient connectivity to azure. Here, obtain a new token and verify P2S authentication succeeds.
Question 376
A P2S gateway is configured but a user receives invalid-signature token errors. During acceptance testing, token issuer is not accepted although the password is correct. Which underlying configuration problem best explains the symptom?
- GatewaySubnet naming or sizing does not meet requirements
- The connection shared key or peer IPsec settings do not match
- Entra issuer or audience configuration does not match the client token
- BFD is not active or the peering device configuration mismatches
Explanation
Correct Answer
C:Entra issuer or audience configuration does not match the client token explains the observed failure: token issuer is not accepted although the password is correct. Correct the design by using validate Microsoft Entra application registration and audience alignment, implemented through correct tenant/issuer/audience fields in the gateway and client settings.
Incorrect Answers
A:GatewaySubnet naming or sizing does not meet requirements. This is relevant when a vpn gateway is provisioned but its resource cannot be placed in the intended VNet. Here, entra issuer or audience configuration does not match the client token.
B:The connection shared key or peer IPsec settings do not match. This concerns an encrypted tunnel to an azure VNet over the public internet. Here, entra issuer or audience configuration does not match the client token.
D:BFD is not active or the peering device configuration mismatches. This concerns faster failure detection on supported expressroute peer connections. Here, entra issuer or audience configuration does not match the client token.
Question 377
A secure remote-client connection requires device certificates from a private PKI. Which Azure networking design most directly satisfies this requirement?
- Use Bidirectional Forwarding Detection with supported ExpressRoute peering
- Choose a supported OpenVPN P2S configuration with Microsoft Entra ID
- Set up certificate-based P2S authentication with a trusted root certificate
- Use a secured virtual hub with Azure Firewall or an eligible security provider
Explanation
Correct Answer
C:Set up certificate-based P2S authentication with a trusted root certificate addresses the topology, access or delivery requirement in the scenario. Apply it by upload the public root CA certificate and provision client certificates with private keys; confirm by connect with an issued client certificate and reject an untrusted cert.
Incorrect Answers
A:Use Bidirectional Forwarding Detection with supported ExpressRoute peering. This concerns faster failure detection on supported ExpressRoute peer connections. Instead, set up certificate-based P2S authentication with a trusted root certificate.
B:Choose a supported OpenVPN P2S configuration with Microsoft Entra ID. This concerns Microsoft Entra authentication for user VPN clients. Instead, set up certificate-based P2S authentication with a trusted root certificate.
D:Use a secured virtual hub with Azure Firewall or an eligible security provider. This concerns secure inspection for all Virtual WAN internet and private paths. Instead, set up certificate-based P2S authentication with a trusted root certificate.
Question 378
A secure remote-client connection requires device certificates from a private PKI. The architecture uses this design: Set up certificate-based P2S authentication with a trusted root certificate. Which configuration should the engineer apply to implement it?
- Configure the P2S tunnel type and matching VPN client support
- Create a User VPN configuration and associate it with the virtual hub User VPN gateway
- Upload the public root CA certificate and provision client certificates with private keys
- Enable active-active gateway operation and configure the two public peer endpoints
Explanation
Correct Answer
C:Upload the public root CA certificate and provision client certificates with private keys is the operational configuration for set up certificate-based p2s authentication with a trusted root certificate. The acceptance test is to connect with an issued client certificate and reject an untrusted cert.
Incorrect Answers
A:Configure the P2S tunnel type and matching VPN client support is a concrete step for select supported openvpn or ikev2 according to platform and auth requirements. Here the selected design is set up certificate-based p2s authentication with a trusted root certificate, which instead requires upload the public root ca certificate and provision client certificates with private keys.
B:Create a User VPN configuration and associate it with the virtual hub User VPN gateway is a concrete step for add a point-to-site user vpn gateway to the virtual wan hub. Here the selected design is set up certificate-based p2s authentication with a trusted root certificate, which instead requires upload the public root ca certificate and provision client certificates with private keys.
D:Enable active-active gateway operation and configure the two public peer endpoints is a concrete step for use a supported active-active vpn gateway topology. Here the selected design is set up certificate-based p2s authentication with a trusted root certificate, which instead requires upload the public root ca certificate and provision client certificates with private keys.
Question 379
A secure remote-client connection requires device certificates from a private PKI. After the team applies this change—upload the public root CA certificate and provision client certificates with private keys—which validation best proves the intended result?
- Correlate disconnect timestamps with tunnel or IKE errors
- Check physical cross-connect completion and peering status
- Connect with an issued client certificate and reject an untrusted cert
- Test each target device OS with the selected protocol
Explanation
Correct Answer
C:Connect with an issued client certificate and reject an untrusted cert directly checks whether the intended outcome occurs, not merely whether a resource exists. If the check fails, investigate whether the root certificate trust or client key chain is incorrect.
Incorrect Answers
A:Correlate disconnect timestamps with tunnel or IKE errors. This is relevant when a vpn gateway connection becomes unstable and the operator needs diagnostics. Instead, connect with an issued client certificate and reject an untrusted cert.
B:Check physical cross-connect completion and peering status. This concerns choosing the correct expressroute connectivity model for a colocation facility. Instead, connect with an issued client certificate and reject an untrusted cert.
D:Test each target device OS with the selected protocol. This concerns using an approved tunnel protocol for mobile remote-user connectivity. Instead, connect with an issued client certificate and reject an untrusted cert.
Question 380
A secure remote-client connection requires device certificates from a private PKI. During acceptance testing, every client is rejected despite presenting a certificate. Which underlying configuration problem best explains the symptom?
- The root certificate trust or client key chain is incorrect
- IPsec security association parameters differ between peers
- The IPsec traffic selector configuration does not include them
- User VPN gateway or client authentication configuration is incomplete
Explanation
Correct Answer
A:The root certificate trust or client key chain is incorrect explains the observed failure: every client is rejected despite presenting a certificate. Correct the design by using set up certificate-based P2S authentication with a trusted root certificate, implemented through upload the public root CA certificate and provision client certificates with private keys.
Incorrect Answers
B:IPsec security association parameters differ between peers. This is relevant when a corporate IPSEC tunnel negotiation fails because peers support different cryptographic suites. Here, the root certificate trust or client key chain is incorrect.
C:The IPsec traffic selector configuration does not include them. This concerns a legacy on-premises IPSEC device only supports policy-based traffic selectors. Here, the root certificate trust or client key chain is incorrect.
D:User VPN gateway or client authentication configuration is incomplete. This concerns remote employees need user vpn access through the managed global wan. Here, the root certificate trust or client key chain is incorrect.
Designing and Implementing Microsoft Azure Networking Solutions (AZ-700) Practice Tests