100% Latest & Updated Microsoft AZ-700 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!
Question 390
An organization wants its VNet connected to an existing private ExpressRoute circuit. The architecture uses this design: Create an ExpressRoute gateway and link it to the circuit. Which configuration should the engineer apply to implement it?
- Inspect service key status and provider/peering/connection health in one workflow
- Set the connection's route table association and propagation labels correctly
- Create a User VPN configuration and associate it with the virtual hub User VPN gateway
- Deploy an eligible gateway in GatewaySubnet and establish the ExpressRoute connection
Explanation
Correct Answer
D:Deploy an eligible gateway in GatewaySubnet and establish the ExpressRoute connection is the operational configuration for create an expressroute gateway and link it to the circuit. The acceptance test is to inspect circuit-to-gateway connection status and test private IP access.
Incorrect Answers
A:Inspect service key status and provider/peering/connection health in one workflow is a concrete step for compare provider provisioning, azure circuit state and bgp peering diagnostics. Here the selected design is create an expressroute gateway and link it to the circuit, which instead requires deploy an eligible gateway in gatewaysubnet and establish the expressroute connection.
B:Set the connection's route table association and propagation labels correctly is a concrete step for review the virtual wan vnet connection association and propagation settings. Here the selected design is create an expressroute gateway and link it to the circuit, which instead requires deploy an eligible gateway in gatewaysubnet and establish the expressroute connection.
C:Create a User VPN configuration and associate it with the virtual hub User VPN gateway is a concrete step for add a point-to-site user vpn gateway to the virtual wan hub. Here the selected design is create an expressroute gateway and link it to the circuit, which instead requires deploy an eligible gateway in gatewaysubnet and establish the expressroute connection.
Question 391
An organization wants its VNet connected to an existing private ExpressRoute circuit. After the team applies this change—deploy an eligible gateway in GatewaySubnet and establish the ExpressRoute connection—which validation best proves the intended result?
- Inspect circuit-to-gateway connection status and test private IP access
- Inspect negotiated selectors and confirm required prefixes pass
- Inspect IKE negotiation diagnostics and re-establish the tunnel
- Verify Established state on both private BGP sessions
Explanation
Correct Answer
A:Inspect circuit-to-gateway connection status and test private IP access directly checks whether the intended outcome occurs, not merely whether a resource exists. If the check fails, investigate whether the VNet gateway connection to the circuit was not created.
Incorrect Answers
B:Inspect negotiated selectors and confirm required prefixes pass. This concerns a legacy on-premises IPSEC device only supports policy-based traffic selectors. Instead, inspect circuit-to-gateway connection status and test private IP access.
C:Inspect IKE negotiation diagnostics and re-establish the tunnel. This is relevant when a corporate IPSEC tunnel negotiation fails because peers support different cryptographic suites. Instead, inspect circuit-to-gateway connection status and test private IP access.
D:Verify Established state on both private BGP sessions. This concerns BGP routing over expressroute fails after the customer changes its asn. Instead, inspect circuit-to-gateway connection status and test private IP access.
Question 392
An organization wants its VNet connected to an existing private ExpressRoute circuit. During acceptance testing, the circuit is active but VNet workloads lack on-premises connectivity. Which underlying configuration problem best explains the symptom?
- User VPN gateway or client authentication configuration is incomplete
- Point-to-site address pool or gateway P2S configuration is missing
- The gateway cannot reach the RADIUS endpoint or the shared secret differs
- The VNet gateway connection to the circuit was not created
Explanation
Correct Answer
D:The VNet gateway connection to the circuit was not created explains the observed failure: the circuit is active but VNet workloads lack on-premises connectivity. Correct the design by using create an ExpressRoute gateway and link it to the circuit, implemented through deploy an eligible gateway in GatewaySubnet and establish the ExpressRoute connection.
Incorrect Answers
A:User VPN gateway or client authentication configuration is incomplete. This concerns remote employees need user vpn access through the managed global wan. Here, the VNet gateway connection to the circuit was not created.
B:Point-to-site address pool or gateway P2S configuration is missing. This concerns remote consultants require per-user encrypted vpn access without maintaining a site router. Here, the VNet gateway connection to the circuit was not created.
C:The gateway cannot reach the RADIUS endpoint or the shared secret differs. This concerns a central radius service to validate users. Here, the VNet gateway connection to the circuit was not created.
Question 393
A customer needs to exchange private Azure VNet routes over ExpressRoute. Which Azure networking design most directly satisfies this requirement?
- Configure Azure private peering on the ExpressRoute circuit
- Use a secured virtual hub with Azure Firewall or an eligible security provider
- Validate transit routes, peering and client routing for the remote pool
- Add an encryption overlay where supported instead of assuming ExpressRoute is encrypted
Explanation
Correct Answer
A:Configure Azure private peering on the ExpressRoute circuit addresses the topology, access or delivery requirement in the scenario. Apply it by set required primary/secondary peering parameters and BGP ASNs with the provider; confirm by verify learned private prefixes on both BGP sessions.
Incorrect Answers
B:Use a secured virtual hub with Azure Firewall or an eligible security provider. This concerns secure inspection for all Virtual WAN internet and private paths. Instead, configure Azure private peering on the ExpressRoute circuit.
C:Validate transit routes, peering and client routing for the remote pool. This is relevant when a VPN user can reach the hub VNet but cannot access a connected spoke. Instead, configure Azure private peering on the ExpressRoute circuit.
D:Add an encryption overlay where supported instead of assuming ExpressRoute is encrypted. This is relevant when a private circuit but also requires cryptographic encryption in transit. Instead, configure Azure private peering on the ExpressRoute circuit.
Question 394
A customer needs to exchange private Azure VNet routes over ExpressRoute. The architecture uses this design: Configure Azure private peering on the ExpressRoute circuit. Which configuration should the engineer apply to implement it?
- Set tenant, audience and issuer parameters and use the Azure VPN Client
- Set required primary/secondary peering parameters and BGP ASNs with the provider
- Set separate peer subnets and BGP parameters for the redundant paths
- Set matching encryption, integrity, DH and PFS parameters where supported
Explanation
Correct Answer
B:Set required primary/secondary peering parameters and BGP ASNs with the provider is the operational configuration for configure azure private peering on the expressroute circuit. The acceptance test is to verify learned private prefixes on both BGP sessions.
Incorrect Answers
A:Set tenant, audience and issuer parameters and use the Azure VPN Client is a concrete step for choose a supported openvpn p2s configuration with microsoft entra id. Here the selected design is configure azure private peering on the expressroute circuit, which instead requires set required primary/secondary peering parameters and bgp asns with the provider.
C:Set separate peer subnets and BGP parameters for the redundant paths is a concrete step for configure both primary and secondary bgp peering connections. Here the selected design is configure azure private peering on the expressroute circuit, which instead requires set required primary/secondary peering parameters and bgp asns with the provider.
D:Set matching encryption, integrity, DH and PFS parameters where supported is a concrete step for align both ends on a supported ike/ipsec policy. Here the selected design is configure azure private peering on the expressroute circuit, which instead requires set required primary/secondary peering parameters and bgp asns with the provider.
Question 395
A customer needs to exchange private Azure VNet routes over ExpressRoute. After the team applies this change—set required primary/secondary peering parameters and BGP ASNs with the provider—which validation best proves the intended result?
- Import the profile into the correct client and verify endpoint settings
- Verify learned private prefixes on both BGP sessions
- Inspect circuit provider status and Azure private peering state
- Inspect client route table and test spoke private IP connectivity
Explanation
Correct Answer
B:Verify learned private prefixes on both BGP sessions directly checks whether the intended outcome occurs, not merely whether a resource exists. If the check fails, investigate whether azure private peering BGP is not established.
Incorrect Answers
A:Import the profile into the correct client and verify endpoint settings. This concerns a user requests a p2s vpn configuration but the client remains unable to import the settings. Instead, verify learned private prefixes on both BGP sessions.
C:Inspect circuit provider status and Azure private peering state. This concerns a private connectivity path from its network provider into microsoft cloud. Instead, verify learned private prefixes on both BGP sessions.
D:Inspect client route table and test spoke private IP connectivity. This is relevant when a vpn user can reach the hub VNet but cannot access a connected spoke. Instead, verify learned private prefixes on both BGP sessions.
Question 396
A customer needs to exchange private Azure VNet routes over ExpressRoute. During acceptance testing, the circuit is up but no VNet addresses are advertised. Which underlying configuration problem best explains the symptom?
- No ExpressRoute gateway-to-circuit connection exists in the hub
- Azure private peering BGP is not established
- The BGP peering session or route advertisement is absent
- Only one usable ISP-to-Azure tunnel path exists
Explanation
Correct Answer
B:Azure private peering BGP is not established explains the observed failure: the circuit is up but no VNet addresses are advertised. Correct the design by using configure Azure private peering on the ExpressRoute circuit, implemented through set required primary/secondary peering parameters and BGP ASNs with the provider.
Incorrect Answers
A:No ExpressRoute gateway-to-circuit connection exists in the hub. This concerns private expressroute access to its global virtual wan topology. The requested service or concept is Azure private peering BGP is not established.
C:The BGP peering session or route advertisement is absent. This concerns advertising and learn routes dynamically across a routed vpn. The requested service or concept is Azure private peering BGP is not established.
D:Only one usable ISP-to-Azure tunnel path exists. This is relevant when a branch uses two different internet providers and wants vpn failover. The requested service or concept is Azure private peering BGP is not established.
Question 397
An enterprise needs ExpressRoute connectivity between distant geopolitical regions. Which Azure networking design most directly satisfies this requirement?
- Evaluate ExpressRoute Premium and Global Reach coverage requirements
- Evaluate Azure P2S settings against Windows Always On VPN prerequisites
- Add an ExpressRoute gateway and circuit connection to an eligible virtual hub
- Consider ExpressRoute FastPath on supported gateway and circuit combinations
Explanation
Correct Answer
A:Evaluate ExpressRoute Premium and Global Reach coverage requirements addresses the topology, access or delivery requirement in the scenario. Apply it by choose an eligible ExpressRoute SKU/add-on for required geographic reach; confirm by validate cross-region VNet connectivity against supported limits.
Incorrect Answers
B:Evaluate Azure P2S settings against Windows Always On VPN prerequisites. This concerns connecting automatically to corporate resources when policy requires. Instead, evaluate ExpressRoute Premium and Global Reach coverage requirements.
C:Add an ExpressRoute gateway and circuit connection to an eligible virtual hub. This concerns private ExpressRoute access to its global Virtual WAN topology. Instead, evaluate ExpressRoute Premium and Global Reach coverage requirements.
D:Consider ExpressRoute FastPath on supported gateway and circuit combinations. This concerns an Azure VNet gateway that sends applicable traffic directly over the ExpressRoute data path for better throughput. Instead, evaluate ExpressRoute Premium and Global Reach coverage requirements.
Question 398
An enterprise needs ExpressRoute connectivity between distant geopolitical regions. The architecture uses this design: Evaluate ExpressRoute Premium and Global Reach coverage requirements. Which configuration should the engineer apply to implement it?
- Choose an eligible ExpressRoute SKU/add-on for required geographic reach
- Configure required DNS servers or Private Resolver reachability in the client setup
- Create the virtual hub ExpressRoute gateway and attach the authorized circuit
- Enable BFD on eligible customer edge routers with compatible settings
Explanation
Correct Answer
A:Choose an eligible ExpressRoute SKU/add-on for required geographic reach is the operational configuration for evaluate expressroute premium and global reach coverage requirements. The acceptance test is to validate cross-region VNet connectivity against supported limits.
Incorrect Answers
B:Configure required DNS servers or Private Resolver reachability in the client setup is a concrete step for deliver appropriate dns resolver settings to p2s vpn clients. Here the selected design is evaluate expressroute premium and global reach coverage requirements, which instead requires choose an eligible expressroute sku/add-on for required geographic reach.
C:Create the virtual hub ExpressRoute gateway and attach the authorized circuit is a concrete step for add an expressroute gateway and circuit connection to an eligible virtual hub. Here the selected design is evaluate expressroute premium and global reach coverage requirements, which instead requires choose an eligible expressroute sku/add-on for required geographic reach.
D:Enable BFD on eligible customer edge routers with compatible settings is a concrete step for use bidirectional forwarding detection with supported expressroute peering. Here the selected design is evaluate expressroute premium and global reach coverage requirements, which instead requires choose an eligible expressroute sku/add-on for required geographic reach.
Question 399
An enterprise needs ExpressRoute connectivity between distant geopolitical regions. After the team applies this change—choose an eligible ExpressRoute SKU/add-on for required geographic reach—which validation best proves the intended result?
- Inspect virtual hub region, address pool and gateway status
- Compare observed throughput and connections to documented SKU limits
- Validate cross-region VNet connectivity against supported limits
- Connect a pilot client and verify hub-connected VNet access
Explanation
Correct Answer
C:Validate cross-region VNet connectivity against supported limits directly checks whether the intended outcome occurs, not merely whether a resource exists. If the check fails, investigate whether the circuit tier does not permit the requested geographic reach.
Incorrect Answers
A:Inspect virtual hub region, address pool and gateway status. This concerns branch connectivity through a managed hub. Here, validate cross-region VNet connectivity against supported limits.
B:Compare observed throughput and connections to documented SKU limits. This is relevant when a new VNet is connected to a circuit but the gateway reports insufficient performance for advertised workload. Here, validate cross-region VNet connectivity against supported limits.
D:Connect a pilot client and verify hub-connected VNet access. This concerns remote employees need user vpn access through the managed global wan. Here, validate cross-region VNet connectivity against supported limits.
Question 400
An enterprise needs ExpressRoute connectivity between distant geopolitical regions. During acceptance testing, a remote region connection is denied despite capacity. Which underlying configuration problem best explains the symptom?
- The circuit tier does not permit the requested geographic reach
- The IPsec traffic selector configuration does not include them
- The gateway cannot reach the RADIUS endpoint or the shared secret differs
- GatewaySubnet naming or sizing does not meet requirements
Explanation
Correct Answer
A:The circuit tier does not permit the requested geographic reach explains the observed failure: a remote region connection is denied despite capacity. Correct the design by using evaluate ExpressRoute Premium and Global Reach coverage requirements, implemented through choose an eligible ExpressRoute SKU/add-on for required geographic reach.
Incorrect Answers
B:The IPsec traffic selector configuration does not include them. This concerns a legacy on-premises IPSEC device only supports policy-based traffic selectors. Here, the circuit tier does not permit the requested geographic reach.
C:The gateway cannot reach the RADIUS endpoint or the shared secret differs. This concerns a central radius service to validate users. Here, the circuit tier does not permit the requested geographic reach.
D:GatewaySubnet naming or sizing does not meet requirements. This is relevant when a vpn gateway is provisioned but its resource cannot be placed in the intended VNet. Here, the circuit tier does not permit the requested geographic reach.
Designing and Implementing Microsoft Azure Networking Solutions (AZ-700) Practice Tests