100% Latest & Updated Microsoft AZ-700 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!
Question 430
A global business needs disaster recovery if its primary ExpressRoute circuit fails. The architecture uses this design: Provision a separate ExpressRoute circuit in a distinct peering location. Which configuration should the engineer apply to implement it?
- Select the colocation provider and peering location appropriate to the site
- Connect both circuits to the target VNet with appropriate routing priority
- Create a User VPN configuration and associate it with the virtual hub User VPN gateway
- Create a Standard Virtual WAN, virtual hub and required branch/VNet connections
Explanation
Correct Answer
B:Connect both circuits to the target VNet with appropriate routing priority is the operational configuration for provision a separate expressroute circuit in a distinct peering location. The acceptance test is to fail the primary circuit and verify DR connectivity.
Incorrect Answers
A:Select the colocation provider and peering location appropriate to the site is a concrete step for use the supported expressroute exchange-provider colocation model. Here the selected design is provision a separate expressroute circuit in a distinct peering location, which instead requires connect both circuits to the target vnet with appropriate routing priority.
C:Create a User VPN configuration and associate it with the virtual hub User VPN gateway is a concrete step for add a point-to-site user vpn gateway to the virtual wan hub. Here the selected design is provision a separate expressroute circuit in a distinct peering location, which instead requires connect both circuits to the target vnet with appropriate routing priority.
D:Create a Standard Virtual WAN, virtual hub and required branch/VNet connections is a concrete step for use azure virtual wan with a standard virtual hub design. Here the selected design is provision a separate expressroute circuit in a distinct peering location, which instead requires connect both circuits to the target vnet with appropriate routing priority.
Question 431
A global business needs disaster recovery if its primary ExpressRoute circuit fails. After the team applies this change—connect both circuits to the target VNet with appropriate routing priority—which validation best proves the intended result?
- Inspect circuit provider status and Azure private peering state
- Fail the primary circuit and verify DR connectivity
- Verify private and internet traffic takes the security policy path
- Inspect client route table and test spoke private IP connectivity
Explanation
Correct Answer
B:Fail the primary circuit and verify DR connectivity directly checks whether the intended outcome occurs, not merely whether a resource exists. If the check fails, investigate whether the redundant circuit is not independent or connected.
Incorrect Answers
A:Inspect circuit provider status and Azure private peering state. This concerns a private connectivity path from its network provider into microsoft cloud. Here, fail the primary circuit and verify DR connectivity.
C:Verify private and internet traffic takes the security policy path. This concerns secure inspection for all virtual wan internet and private paths. Here, fail the primary circuit and verify DR connectivity.
D:Inspect client route table and test spoke private IP connectivity. This is relevant when a vpn user can reach the hub VNet but cannot access a connected spoke. Here, fail the primary circuit and verify DR connectivity.
Question 432
A global business needs disaster recovery if its primary ExpressRoute circuit fails. During acceptance testing, loss of the primary peering location stops cloud access. Which underlying configuration problem best explains the symptom?
- GatewaySubnet naming or sizing does not meet requirements
- The redundant circuit is not independent or connected
- Its certificate thumbprint was not added to the revocation list
- No regional virtual hub was deployed or connected
Explanation
Correct Answer
B:The redundant circuit is not independent or connected explains the observed failure: loss of the primary peering location stops cloud access. Correct the design by using provision a separate ExpressRoute circuit in a distinct peering location, implemented through connect both circuits to the target VNet with appropriate routing priority.
Incorrect Answers
A:GatewaySubnet naming or sizing does not meet requirements. This is relevant when a vpn gateway is provisioned but its resource cannot be placed in the intended VNet. Here, the redundant circuit is not independent or connected.
C:Its certificate thumbprint was not added to the revocation list. This concerns revoking one contractor. Here, the redundant circuit is not independent or connected.
D:No regional virtual hub was deployed or connected. This concerns branch connectivity through a managed hub. Here, the redundant circuit is not independent or connected.
Question 433
A new VNet is connected to a circuit but the gateway reports insufficient performance for advertised workload. Which Azure networking design most directly satisfies this requirement?
- Update customer edge BGP prefix advertisements on ExpressRoute private peering
- Choose a supported larger ExpressRoute gateway SKU
- Evaluate policy-based compatibility against Azure VPN Gateway support and requirements
- Create a local network gateway with correct site address and prefixes
Explanation
Correct Answer
B:Choose a supported larger ExpressRoute gateway SKU addresses the topology, access or delivery requirement in the scenario. Apply it by scale the ExpressRoute virtual network gateway to an eligible capacity tier; confirm by compare observed throughput and connections to documented SKU limits.
Incorrect Answers
A:Update customer edge BGP prefix advertisements on ExpressRoute private peering. This concerns routing advertisement changes between the datacenter and Azure VNet. Instead, choose a supported larger ExpressRoute gateway SKU.
C:Evaluate policy-based compatibility against Azure VPN Gateway support and requirements. This concerns a legacy on-premises IPSEC device only supports policy-based traffic selectors. Instead, choose a supported larger ExpressRoute gateway SKU.
D:Create a local network gateway with correct site address and prefixes. This concerns being represented in Azure. Instead, choose a supported larger ExpressRoute gateway SKU.
Question 434
A new VNet is connected to a circuit but the gateway reports insufficient performance for advertised workload. The architecture uses this design: Choose a supported larger ExpressRoute gateway SKU. Which configuration should the engineer apply to implement it?
- Enable gateway diagnostic categories and review connection events
- Download the VPN profile after gateway and P2S settings are complete
- Scale the ExpressRoute virtual network gateway to an eligible capacity tier
- Provision ExpressRoute Direct ports and create appropriate circuits on them
Explanation
Correct Answer
C:Scale the ExpressRoute virtual network gateway to an eligible capacity tier is the operational configuration for choose a supported larger expressroute gateway sku. The acceptance test is to compare observed throughput and connections to documented SKU limits.
Incorrect Answers
A:Enable gateway diagnostic categories and review connection events is a concrete step for use vpn gateway diagnostic logs and tunnel metrics. Here the selected design is choose a supported larger expressroute gateway sku, which instead requires scale the expressroute virtual network gateway to an eligible capacity tier.
B:Download the VPN profile after gateway and P2S settings are complete is a concrete step for regenerate and distribute the current vpn client configuration profile. Here the selected design is choose a supported larger expressroute gateway sku, which instead requires scale the expressroute virtual network gateway to an eligible capacity tier.
D:Provision ExpressRoute Direct ports and create appropriate circuits on them is a concrete step for evaluate expressroute direct for dedicated physical ports. Here the selected design is choose a supported larger expressroute gateway sku, which instead requires scale the expressroute virtual network gateway to an eligible capacity tier.
Question 435
A new VNet is connected to a circuit but the gateway reports insufficient performance for advertised workload. After the team applies this change—scale the ExpressRoute virtual network gateway to an eligible capacity tier—which validation best proves the intended result?
- Compare observed throughput and connections to documented SKU limits
- Validate cross-region VNet connectivity against supported limits
- Compare SKU-supported gateway and routing features to the actual use case
- Check VPN gateway connections and test a branch private subnet
Explanation
Correct Answer
A:Compare observed throughput and connections to documented SKU limits directly checks whether the intended outcome occurs, not merely whether a resource exists. If the check fails, investigate whether the ExpressRoute gateway SKU is underprovisioned.
Incorrect Answers
B:Validate cross-region VNet connectivity against supported limits. This concerns expressroute connectivity between distant geopolitical regions. Instead, compare observed throughput and connections to documented SKU limits.
C:Compare SKU-supported gateway and routing features to the actual use case. This concerns simple isolated site-to-site vpn connections without advanced transitive features. Instead, compare observed throughput and connections to documented SKU limits.
D:Check VPN gateway connections and test a branch private subnet. This concerns an IPSEC termination point for corporate branches. Instead, compare observed throughput and connections to documented SKU limits.
Question 436
A new VNet is connected to a circuit but the gateway reports insufficient performance for advertised workload. During acceptance testing, the gateway saturates before circuit bandwidth is reached. Which underlying configuration problem best explains the symptom?
- Local network gateway address prefixes are wrong
- The ExpressRoute gateway SKU is underprovisioned
- The gateway cannot reach the RADIUS endpoint or the shared secret differs
- Point-to-site address pool or gateway P2S configuration is missing
Explanation
Correct Answer
B:The ExpressRoute gateway SKU is underprovisioned explains the observed failure: the gateway saturates before circuit bandwidth is reached. Correct the design by using choose a supported larger ExpressRoute gateway SKU, implemented through scale the ExpressRoute virtual network gateway to an eligible capacity tier.
Incorrect Answers
A:Local network gateway address prefixes are wrong. This concerns being represented in azure. Here, the ExpressRoute gateway SKU is underprovisioned.
C:The gateway cannot reach the RADIUS endpoint or the shared secret differs. This concerns a central radius service to validate users. Here, the ExpressRoute gateway SKU is underprovisioned.
D:Point-to-site address pool or gateway P2S configuration is missing. This concerns remote consultants require per-user encrypted vpn access without maintaining a site router. Here, the ExpressRoute gateway SKU is underprovisioned.
Question 437
BGP routing over ExpressRoute fails after the customer changes its ASN. Which Azure networking design most directly satisfies this requirement?
- Create a local network gateway with correct site address and prefixes
- Choose Microsoft peering only when its supported service requirements apply
- Enable BGP with supported gateway and customer edge configuration
- Coordinate the correct customer and Microsoft BGP ASN parameters
Explanation
Correct Answer
D:Coordinate the correct customer and Microsoft BGP ASN parameters addresses the topology, access or delivery requirement in the scenario. Apply it by update the peering ASN configuration and the customer's border router; confirm by verify Established state on both private BGP sessions.
Incorrect Answers
A:Create a local network gateway with correct site address and prefixes. This concerns being represented in Azure. Here, coordinate the correct customer and Microsoft BGP ASN parameters.
B:Choose Microsoft peering only when its supported service requirements apply. This concerns Microsoft peering to reach applicable Microsoft public service prefixes. Here, coordinate the correct customer and Microsoft BGP ASN parameters.
C:Enable BGP with supported gateway and customer edge configuration. This concerns advertising and learn routes dynamically across a routed VPN. Here, coordinate the correct customer and Microsoft BGP ASN parameters.
Question 438
BGP routing over ExpressRoute fails after the customer changes its ASN. The architecture uses this design: Coordinate the correct customer and Microsoft BGP ASN parameters. Which configuration should the engineer apply to implement it?
- Inspect service key status and provider/peering/connection health in one workflow
- Update the peering ASN configuration and the customer's border router
- Advertise applicable spoke routes to P2S clients and enable needed hub peering options
- Create a User VPN configuration and associate it with the virtual hub User VPN gateway
Explanation
Correct Answer
B:Update the peering ASN configuration and the customer's border router is the operational configuration for coordinate the correct customer and microsoft bgp asn parameters. The acceptance test is to verify Established state on both private BGP sessions.
Incorrect Answers
A:Inspect service key status and provider/peering/connection health in one workflow is a concrete step for compare provider provisioning, azure circuit state and bgp peering diagnostics. Here the selected design is coordinate the correct customer and microsoft bgp asn parameters, which instead requires update the peering asn configuration and the customer's border router.
C:Advertise applicable spoke routes to P2S clients and enable needed hub peering options is a concrete step for validate transit routes, peering and client routing for the remote pool. Here the selected design is coordinate the correct customer and microsoft bgp asn parameters, which instead requires update the peering asn configuration and the customer's border router.
D:Create a User VPN configuration and associate it with the virtual hub User VPN gateway is a concrete step for add a point-to-site user vpn gateway to the virtual wan hub. Here the selected design is coordinate the correct customer and microsoft bgp asn parameters, which instead requires update the peering asn configuration and the customer's border router.
Question 439
BGP routing over ExpressRoute fails after the customer changes its ASN. After the team applies this change—update the peering ASN configuration and the customer's border router—which validation best proves the intended result?
- Verify Established state on both private BGP sessions
- Import the profile into the correct client and verify endpoint settings
- Inspect circuit-to-gateway connection status and test private IP access
- Inspect client route table and test spoke private IP connectivity
Explanation
Correct Answer
A:Verify Established state on both private BGP sessions directly checks whether the intended outcome occurs, not merely whether a resource exists. If the check fails, investigate whether aSN or neighbor configuration is inconsistent.
Incorrect Answers
B:Import the profile into the correct client and verify endpoint settings. This concerns a user requests a p2s vpn configuration but the client remains unable to import the settings. Instead, verify Established state on both private BGP sessions.
C:Inspect circuit-to-gateway connection status and test private IP access. This concerns its VNet connected to an existing private expressroute circuit. Instead, verify Established state on both private BGP sessions.
D:Inspect client route table and test spoke private IP connectivity. This is relevant when a vpn user can reach the hub VNet but cannot access a connected spoke. Instead, verify Established state on both private BGP sessions.
Question 440
BGP routing over ExpressRoute fails after the customer changes its ASN. During acceptance testing, the BGP neighbors remain Idle after the change. Which underlying configuration problem best explains the symptom?
- Entra issuer or audience configuration does not match the client token
- The IPsec traffic selector configuration does not include them
- Point-to-site address pool or gateway P2S configuration is missing
- ASN or neighbor configuration is inconsistent
Explanation
Correct Answer
D:ASN or neighbor configuration is inconsistent explains the observed failure: the BGP neighbors remain Idle after the change. Correct the design by using coordinate the correct customer and Microsoft BGP ASN parameters, implemented through update the peering ASN configuration and the customer's border router.
Incorrect Answers
A:Entra issuer or audience configuration does not match the client token. This is relevant when a p2s gateway is configured but a user receives invalid-signature token errors. The relevant SQL or system operation is ASN or neighbor configuration is inconsistent.
B:The IPsec traffic selector configuration does not include them. This concerns a legacy on-premises IPSEC device only supports policy-based traffic selectors. The relevant SQL or system operation is ASN or neighbor configuration is inconsistent.
C:Point-to-site address pool or gateway P2S configuration is missing. This concerns remote consultants require per-user encrypted vpn access without maintaining a site router. The relevant SQL or system operation is ASN or neighbor configuration is inconsistent.
Designing and Implementing Microsoft Azure Networking Solutions (AZ-700) Practice Tests