100% Latest & Updated Microsoft AZ-700 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!
Question 510
A globally accessible TCP service needs cross-region failover of regional load balancers. The architecture uses this design: Use an Azure cross-region Load Balancer supported deployment. Which configuration should the engineer apply to implement it?
- Set origin group probe, priority and load-balancing parameters
- Configure a private frontend IP in the Application Gateway subnet
- Set up a cross-region frontend backed by eligible regional load balancers
- Create a backend pool, health probe and TCP load balancing rule
Explanation
Correct Answer
C:Set up a cross-region frontend backed by eligible regional load balancers is the operational configuration for use an azure cross-region load balancer supported deployment. The acceptance test is to make one region unhealthy and observe traffic shift to the healthy region.
Incorrect Answers
A:Set origin group probe, priority and load-balancing parameters is a concrete step for configure front door origin load balancing with appropriate latency sensitivity and priority. Here the selected design is use an azure cross-region load balancer supported deployment, which instead requires set up a cross-region frontend backed by eligible regional load balancers.
B:Configure a private frontend IP in the Application Gateway subnet is a concrete step for use an internal application gateway frontend ip. Here the selected design is use an azure cross-region load balancer supported deployment, which instead requires set up a cross-region frontend backed by eligible regional load balancers.
D:Create a backend pool, health probe and TCP load balancing rule is a concrete step for use a standard azure load balancer with a tcp rule. Here the selected design is use an azure cross-region load balancer supported deployment, which instead requires set up a cross-region frontend backed by eligible regional load balancers.
Question 511
A globally accessible TCP service needs cross-region failover of regional load balancers. After the team applies this change—set up a cross-region frontend backed by eligible regional load balancers—which validation best proves the intended result?
- Fail one origin and confirm traffic switches based on origin health
- Make one region unhealthy and observe traffic shift to the healthy region
- Observe request distribution over sufficient samples
- Scale out and verify new NICs appear as healthy backend members
Explanation
Correct Answer
B:Make one region unhealthy and observe traffic shift to the healthy region directly checks whether the intended outcome occurs, not merely whether a resource exists. If the check fails, investigate whether the cross-region backend or health design is incomplete.
Incorrect Answers
A:Fail one origin and confirm traffic switches based on origin health. This concerns edge routing to healthy multi-region application origins. Here, make one region unhealthy and observe traffic shift to the healthy region.
C:Observe request distribution over sufficient samples. This concerns weighted migration from old to new origins while both remain healthy. Here, make one region unhealthy and observe traffic shift to the healthy region.
D:Scale out and verify new NICs appear as healthy backend members. This concerns a backend pool contains scale-set instances but new instances do not receive traffic. Here, make one region unhealthy and observe traffic shift to the healthy region.
Question 512
A globally accessible TCP service needs cross-region failover of regional load balancers. During acceptance testing, traffic stops when the selected primary region fails. Which underlying configuration problem best explains the symptom?
- The URL path map or rule order sends requests to the wrong backend
- The cross-region backend or health design is incomplete
- Origin group health or latency settings do not reflect actual conditions
- Health probe path or expected status does not match the service
Explanation
Correct Answer
B:The cross-region backend or health design is incomplete explains the observed failure: traffic stops when the selected primary region fails. Correct the design by using use an Azure cross-region Load Balancer supported deployment, implemented through set up a cross-region frontend backed by eligible regional load balancers.
Incorrect Answers
A:The URL path map or rule order sends requests to the wrong backend. This concerns request-path routing between /API and /images on one public site. Here, the cross-region backend or health design is incomplete.
C:Origin group health or latency settings do not reflect actual conditions. This concerns selecting an origin based on latency and backend health. Here, the cross-region backend or health design is incomplete.
D:Health probe path or expected status does not match the service. This concerns controlled health probing that avoids treating login redirects as failure. Here, the cross-region backend or health design is incomplete.
Question 513
A website needs DNS-based regional redirection based on endpoint health. Which Azure networking design most directly satisfies this requirement?
- Use Azure Front Door Standard or Premium for global Layer 7 delivery
- Use an explicit outbound rule with allocated frontend IPs and ports
- Use Azure Traffic Manager with Priority routing
- Use Application Gateway path rules with dedicated backend settings
Explanation
Correct Answer
C:Use Azure Traffic Manager with Priority routing addresses the topology, access or delivery requirement in the scenario. Apply it by create endpoints with health checks and configure the Priority traffic-routing method; confirm by simulate failure of the primary endpoint and inspect DNS answers.
Incorrect Answers
A:Use Azure Front Door Standard or Premium for global Layer 7 delivery. This concerns edge routing to healthy multi-region application origins. Instead, use Azure Traffic Manager with Priority routing.
B:Use an explicit outbound rule with allocated frontend IPs and ports. This concerns explicit outbound SNAT capacity for many simultaneous connections. Instead, use Azure Traffic Manager with Priority routing.
D:Use Application Gateway path rules with dedicated backend settings. This concerns exposing different backends for billing and inventory through the same HTTPS address. Instead, use Azure Traffic Manager with Priority routing.
Question 514
A website needs DNS-based regional redirection based on endpoint health. The architecture uses this design: Use Azure Traffic Manager with Priority routing. Which configuration should the engineer apply to implement it?
- Create endpoints with health checks and configure the Priority traffic-routing method
- Configure a private frontend IP in the Application Gateway subnet
- Configure the load balancer outbound rule and sufficient SNAT allocation
- Create a WAF policy and attach it to the intended gateway or listener
Explanation
Correct Answer
A:Create endpoints with health checks and configure the Priority traffic-routing method is the operational configuration for use azure traffic manager with priority routing. The acceptance test is to simulate failure of the primary endpoint and inspect DNS answers.
Incorrect Answers
B:Configure a private frontend IP in the Application Gateway subnet is a concrete step for use an internal application gateway frontend ip. Here the selected design is use azure traffic manager with priority routing, which instead requires create endpoints with health checks and configure the priority traffic-routing method.
C:Configure the load balancer outbound rule and sufficient SNAT allocation is a concrete step for use an explicit outbound rule with allocated frontend ips and ports. Here the selected design is use azure traffic manager with priority routing, which instead requires create endpoints with health checks and configure the priority traffic-routing method.
D:Create a WAF policy and attach it to the intended gateway or listener is a concrete step for associate an azure waf policy with an eligible application gateway waf sku. Here the selected design is use azure traffic manager with priority routing, which instead requires create endpoints with health checks and configure the priority traffic-routing method.
Question 515
A website needs DNS-based regional redirection based on endpoint health. After the team applies this change—create endpoints with health checks and configure the Priority traffic-routing method—which validation best proves the intended result?
- Make sequential connections from one client and inspect backend selection
- Simulate failure of the primary endpoint and inspect DNS answers
- Verify access inside the VNet and lack of unintended public endpoint
- Request the external URL and inspect origin request path without a browser redirect
Explanation
Correct Answer
B:Simulate failure of the primary endpoint and inspect DNS answers directly checks whether the intended outcome occurs, not merely whether a resource exists. If the check fails, investigate whether endpoint monitoring or priority configuration is incorrect.
Incorrect Answers
A:Make sequential connections from one client and inspect backend selection. This concerns preserving one client’s affinity for a legacy backend session. Here, simulate failure of the primary endpoint and inspect DNS answers.
C:Verify access inside the VNet and lack of unintended public endpoint. This concerns only be exposed by private layer 7 frontend. Here, simulate failure of the primary endpoint and inspect DNS answers.
D:Request the external URL and inspect origin request path without a browser redirect. This concerns receiving content under a new path while preserving its visible request url. Here, simulate failure of the primary endpoint and inspect DNS answers.
Question 516
A website needs DNS-based regional redirection based on endpoint health. During acceptance testing, dNS keeps returning an unhealthy primary site. Which underlying configuration problem best explains the symptom?
- Endpoint monitoring or priority configuration is incorrect
- A redirect action was used instead of a rewrite
- The origin group health probe or priority settings are wrong
- Origin weights or priority are not configured as intended
Explanation
Correct Answer
A:Endpoint monitoring or priority configuration is incorrect explains the observed failure: dNS keeps returning an unhealthy primary site. Correct the design by using use Azure Traffic Manager with Priority routing, implemented through create endpoints with health checks and configure the Priority traffic-routing method.
Incorrect Answers
B:A redirect action was used instead of a rewrite. This concerns receiving content under a new path while preserving its visible request url. Here, endpoint monitoring or priority configuration is incorrect.
C:The origin group health probe or priority settings are wrong. This concerns edge routing to healthy multi-region application origins. Here, endpoint monitoring or priority configuration is incorrect.
D:Origin weights or priority are not configured as intended. This concerns weighted migration from old to new origins while both remain healthy. Here, endpoint monitoring or priority configuration is incorrect.
Question 517
A global app wants clients sent toward geographically close regional endpoints using DNS policy. Which Azure networking design most directly satisfies this requirement?
- Set Front Door origin weights for gradual traffic distribution
- Use Traffic Manager Performance routing where appropriate
- Create a TCP or HTTPS load balancer probe appropriate to service behavior
- Configure Application Gateway cookie-based affinity when appropriate
Explanation
Correct Answer
B:Use Traffic Manager Performance routing where appropriate addresses the topology, access or delivery requirement in the scenario. Apply it by set performance traffic-routing method and enable regional endpoint monitoring; confirm by query from multiple client regions and inspect selected endpoint answers.
Incorrect Answers
A:Set Front Door origin weights for gradual traffic distribution. This concerns weighted migration from old to new origins while both remain healthy. Instead, use Traffic Manager Performance routing where appropriate.
C:Create a TCP or HTTPS load balancer probe appropriate to service behavior. This is relevant when a VM scale set exposes a custom TLS service on TCP 8443 and needs a health probe. Instead, use Traffic Manager Performance routing where appropriate.
D:Configure Application Gateway cookie-based affinity when appropriate. This concerns cookie affinity for authenticated sessions. Instead, use Traffic Manager Performance routing where appropriate.
Question 518
A global app wants clients sent toward geographically close regional endpoints using DNS policy. The architecture uses this design: Use Traffic Manager Performance routing where appropriate. Which configuration should the engineer apply to implement it?
- Deploy Front Door routing and associate a compatible WAF security policy
- Set up a cross-region frontend backed by eligible regional load balancers
- Set performance traffic-routing method and enable regional endpoint monitoring
- Create a supported header rewrite set and associate it with the routing rule
Explanation
Correct Answer
C:Set performance traffic-routing method and enable regional endpoint monitoring is the operational configuration for use traffic manager performance routing where appropriate. The acceptance test is to query from multiple client regions and inspect selected endpoint answers.
Incorrect Answers
A:Deploy Front Door routing and associate a compatible WAF security policy is a concrete step for choose front door with supported waf policy instead of only regional application gateway. Here the selected design is use traffic manager performance routing where appropriate, which instead requires set performance traffic-routing method and enable regional endpoint monitoring.
B:Set up a cross-region frontend backed by eligible regional load balancers is a concrete step for use an azure cross-region load balancer supported deployment. Here the selected design is use traffic manager performance routing where appropriate, which instead requires set performance traffic-routing method and enable regional endpoint monitoring.
D:Create a supported header rewrite set and associate it with the routing rule is a concrete step for use application gateway rewrite rule sets. Here the selected design is use traffic manager performance routing where appropriate, which instead requires set performance traffic-routing method and enable regional endpoint monitoring.
Question 519
A global app wants clients sent toward geographically close regional endpoints using DNS policy. After the team applies this change—set performance traffic-routing method and enable regional endpoint monitoring—which validation best proves the intended result?
- Stop the service on one instance and inspect probe health
- Run a load test and inspect observed scale-out and latency
- Inspect global requests and WAF match logs at edge
- Query from multiple client regions and inspect selected endpoint answers
Explanation
Correct Answer
D:Query from multiple client regions and inspect selected endpoint answers directly checks whether the intended outcome occurs, not merely whether a resource exists. If the check fails, investigate whether the Traffic Manager routing method is not performance-based.
Incorrect Answers
A:Stop the service on one instance and inspect probe health. This is relevant when a vm scale set exposes a custom TLS service on tcp 8443 and needs a health probe. Instead, query from multiple client regions and inspect selected endpoint answers.
B:Run a load test and inspect observed scale-out and latency. This concerns managed autoscale for uneven regional web traffic. Instead, query from multiple client regions and inspect selected endpoint answers.
C:Inspect global requests and WAF match logs at edge. This concerns regional traffic acceleration and waf at the global edge. Instead, query from multiple client regions and inspect selected endpoint answers.
Question 520
A global app wants clients sent toward geographically close regional endpoints using DNS policy. During acceptance testing, distant clients consistently receive an unnecessarily far endpoint. Which underlying configuration problem best explains the symptom?
- The multi-site listener or host-routing rule is incorrect
- Origin group health or latency settings do not reflect actual conditions
- The Traffic Manager routing method is not performance-based
- Gateway backend trust or HTTPS settings are incomplete
Explanation
Correct Answer
C:The Traffic Manager routing method is not performance-based explains the observed failure: distant clients consistently receive an unnecessarily far endpoint. Correct the design by using use Traffic Manager Performance routing where appropriate, implemented through set performance traffic-routing method and enable regional endpoint monitoring.
Incorrect Answers
A:The multi-site listener or host-routing rule is incorrect. This concerns host-based routing to two backend web applications. Here, the Traffic Manager routing method is not performance-based.
B:Origin group health or latency settings do not reflect actual conditions. This concerns selecting an origin based on latency and backend health. Here, the Traffic Manager routing method is not performance-based.
D:Gateway backend trust or HTTPS settings are incomplete. This concerns keeping TLS termination at the gateway but re-encrypt to internal web servers. Here, the Traffic Manager routing method is not performance-based.
Designing and Implementing Microsoft Azure Networking Solutions (AZ-700) Practice Tests