100% Latest & Updated Microsoft AZ-700 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!
Question 530
A VM scale set exposes a custom TLS service on TCP 8443 and needs a health probe. The architecture uses this design: Create a TCP or HTTPS load balancer probe appropriate to service behavior. Which configuration should the engineer apply to implement it?
- Update NSG rules to allow the AzureLoadBalancer service tag/probe sources
- Set frontend rule and probe port to the actual backend listener
- Define URL path map rules and corresponding backend pool settings
- Configure a rule set that rewrites the origin-facing path
Explanation
Correct Answer
B:Set frontend rule and probe port to the actual backend listener is the operational configuration for create a tcp or https load balancer probe appropriate to service behavior. The acceptance test is to stop the service on one instance and inspect probe health.
Incorrect Answers
A:Update NSG rules to allow the AzureLoadBalancer service tag/probe sources is a concrete step for permit necessary azure health-probe traffic while retaining least privilege. Here the selected design is create a tcp or https load balancer probe appropriate to service behavior, which instead requires set frontend rule and probe port to the actual backend listener.
C:Define URL path map rules and corresponding backend pool settings is a concrete step for configure application gateway path-based routing. Here the selected design is create a tcp or https load balancer probe appropriate to service behavior, which instead requires set frontend rule and probe port to the actual backend listener.
D:Configure a rule set that rewrites the origin-facing path is a concrete step for use front door url rewrite rather than redirect. Here the selected design is create a tcp or https load balancer probe appropriate to service behavior, which instead requires set frontend rule and probe port to the actual backend listener.
Question 531
A VM scale set exposes a custom TLS service on TCP 8443 and needs a health probe. After the team applies this change—set frontend rule and probe port to the actual backend listener—which validation best proves the intended result?
- Send requests to both paths and inspect selected backend responses
- Make sequential connections from one client and inspect backend selection
- Request the external URL and inspect origin request path without a browser redirect
- Stop the service on one instance and inspect probe health
Explanation
Correct Answer
D:Stop the service on one instance and inspect probe health directly checks whether the intended outcome occurs, not merely whether a resource exists. If the check fails, investigate whether health checks target the wrong port or path.
Incorrect Answers
A:Send requests to both paths and inspect selected backend responses. This concerns request-path routing between /API and /images on one public site. Instead, stop the service on one instance and inspect probe health.
B:Make sequential connections from one client and inspect backend selection. This concerns preserving one client’s affinity for a legacy backend session. Instead, stop the service on one instance and inspect probe health.
C:Request the external URL and inspect origin request path without a browser redirect. This concerns receiving content under a new path while preserving its visible request url. Instead, stop the service on one instance and inspect probe health.
Question 532
A VM scale set exposes a custom TLS service on TCP 8443 and needs a health probe. During acceptance testing, the load balancer still sends clients to a stopped service. Which underlying configuration problem best explains the symptom?
- Backend HTTPS hostname or certificate trust settings are wrong
- The default probe path or host header does not match the application
- The path route references incompatible backend HTTP settings
- Health checks target the wrong port or path
Explanation
Correct Answer
D:Health checks target the wrong port or path explains the observed failure: the load balancer still sends clients to a stopped service. Correct the design by using create a TCP or HTTPS load balancer probe appropriate to service behavior, implemented through set frontend rule and probe port to the actual backend listener.
Incorrect Answers
A:Backend HTTPS hostname or certificate trust settings are wrong. This concerns end-to-end HTTPS from clients through the gateway to its backend. Here, health checks target the wrong port or path.
B:The default probe path or host header does not match the application. This concerns a legacy web backend only responds properly to a customized probe uri. Here, health checks target the wrong port or path.
C:The path route references incompatible backend HTTP settings. This concerns exposing different backends for billing and inventory through the same HTTPS address. Here, health checks target the wrong port or path.
Question 533
A web API behind Azure Load Balancer must preserve one client’s affinity for a legacy backend session. Which TWO listed choices identify the suitable Azure design and the concrete configuration required to implement it? (Choose TWO.)
- Use Azure Gateway Load Balancer with service chaining
- Create a matching condition and redirect rule for the old path
- Configure session persistence as needed for the TCP/UDP load balancing rule
- Use an Azure Front Door rule set with a URL redirect action
- Select an appropriate session persistence mode on the Load Balancer rule
Explanation
Correct Answers
C:Configure session persistence as needed for the TCP/UDP load balancing rule addresses the topology, access or delivery requirement in the scenario. Apply it by select an appropriate session persistence mode on the Load Balancer rule; confirm by make sequential connections from one client and inspect backend selection.
E:Select an appropriate session persistence mode on the Load Balancer rule is the operational configuration for configure session persistence as needed for the tcp/udp load balancing rule. The acceptance test is to make sequential connections from one client and inspect backend selection.
Incorrect Answers
A:Use Azure Gateway Load Balancer with service chaining. This concerns receiving traffic transparently before an application backend. Instead, configure session persistence as needed for the TCP/UDP load balancing rule.
B:Create a matching condition and redirect rule for the old path is a concrete step for use an azure front door rule set with a url redirect action. Here the selected design is configure session persistence as needed for the tcp/udp load balancing rule, which instead requires select an appropriate session persistence mode on the load balancer rule.
D:Use an Azure Front Door rule set with a URL redirect action. This concerns redirecting /old to /new at the network edge. Instead, configure session persistence as needed for the TCP/UDP load balancing rule.
Question 534
A web API behind Azure Load Balancer must preserve one client’s affinity for a legacy backend session. The architecture uses this design: Configure session persistence as needed for the TCP/UDP load balancing rule. Which configuration should the engineer apply to implement it?
- Create a matching condition and redirect rule for the old path
- Configure a rule set that rewrites the origin-facing path
- Select an appropriate session persistence mode on the Load Balancer rule
- Set frontend rule and probe port to the actual backend listener
Explanation
Correct Answer
C:Select an appropriate session persistence mode on the Load Balancer rule is the operational configuration for configure session persistence as needed for the tcp/udp load balancing rule. The acceptance test is to make sequential connections from one client and inspect backend selection.
Incorrect Answers
A:Create a matching condition and redirect rule for the old path is a concrete step for use an azure front door rule set with a url redirect action. Here the selected design is configure session persistence as needed for the tcp/udp load balancing rule, which instead requires select an appropriate session persistence mode on the load balancer rule.
B:Configure a rule set that rewrites the origin-facing path is a concrete step for use front door url rewrite rather than redirect. Here the selected design is configure session persistence as needed for the tcp/udp load balancing rule, which instead requires select an appropriate session persistence mode on the load balancer rule.
D:Set frontend rule and probe port to the actual backend listener is a concrete step for create a tcp or https load balancer probe appropriate to service behavior. Here the selected design is configure session persistence as needed for the tcp/udp load balancing rule, which instead requires select an appropriate session persistence mode on the load balancer rule.
Question 535
A web API behind Azure Load Balancer must preserve one client’s affinity for a legacy backend session. After the team applies this change—select an appropriate session persistence mode on the Load Balancer rule—which validation best proves the intended result?
- Stop the service on one instance and inspect probe health
- Make sequential connections from one client and inspect backend selection
- Run a load test and inspect observed scale-out and latency
- Request HTTP and inspect Location header and 301/302 status
Explanation
Correct Answer
B:Make sequential connections from one client and inspect backend selection directly checks whether the intended outcome occurs, not merely whether a resource exists. If the check fails, investigate whether session persistence mode does not match the application requirement.
Incorrect Answers
A:Stop the service on one instance and inspect probe health. This is relevant when a vm scale set exposes a custom TLS service on tcp 8443 and needs a health probe. Here, make sequential connections from one client and inspect backend selection.
C:Run a load test and inspect observed scale-out and latency. This concerns managed autoscale for uneven regional web traffic. Here, make sequential connections from one client and inspect backend selection.
D:Request HTTP and inspect Location header and 301/302 status. This concerns redirecting from http port 80 to secure HTTPS without a backend redirect. Here, make sequential connections from one client and inspect backend selection.
Question 536
A web API behind Azure Load Balancer must preserve one client’s affinity for a legacy backend session. During acceptance testing, a client is routed to unrelated backends during an affinity-dependent workflow. Which underlying configuration problem best explains the symptom?
- Backend session affinity or shared session state is misconfigured
- No Application Gateway redirect rule is configured
- Session persistence mode does not match the application requirement
- Health probe path or expected status does not match the service
Explanation
Correct Answer
C:Session persistence mode does not match the application requirement explains the observed failure: a client is routed to unrelated backends during an affinity-dependent workflow. Correct the design by using configure session persistence as needed for the TCP/UDP load balancing rule, implemented through select an appropriate session persistence mode on the Load Balancer rule.
Incorrect Answers
A:Backend session affinity or shared session state is misconfigured. This concerns cookie affinity for authenticated sessions. Here, session persistence mode does not match the application requirement.
B:No Application Gateway redirect rule is configured. This concerns redirecting from http port 80 to secure HTTPS without a backend redirect. Here, session persistence mode does not match the application requirement.
D:Health probe path or expected status does not match the service. This concerns controlled health probing that avoids treating login redirects as failure. Here, session persistence mode does not match the application requirement.
Question 537
A public Load Balancer backend needs explicit outbound SNAT capacity for many simultaneous connections. Which Azure networking design most directly satisfies this requirement?
- Use an explicit outbound rule with allocated frontend IPs and ports
- Associate an Azure WAF policy with an eligible Application Gateway WAF SKU
- Configure Front Door HTTPS delivery with end-to-end TLS
- Use Azure Gateway Load Balancer with service chaining
Explanation
Correct Answer
A:Use an explicit outbound rule with allocated frontend IPs and ports addresses the topology, access or delivery requirement in the scenario. Apply it by configure the load balancer outbound rule and sufficient SNAT allocation; confirm by monitor SNAT port consumption while load testing outbound sessions.
Incorrect Answers
B:Associate an Azure WAF policy with an eligible Application Gateway WAF SKU. This concerns request-level Web Application Firewall protection at a regional gateway. Instead, use an explicit outbound rule with allocated frontend IPs and ports.
C:Configure Front Door HTTPS delivery with end-to-end TLS. This concerns TLS at the edge and HTTPS to each private origin. Instead, use an explicit outbound rule with allocated frontend IPs and ports.
D:Use Azure Gateway Load Balancer with service chaining. This concerns receiving traffic transparently before an application backend. Instead, use an explicit outbound rule with allocated frontend IPs and ports.
Question 538
A public Load Balancer backend needs explicit outbound SNAT capacity for many simultaneous connections. The architecture uses this design: Use an explicit outbound rule with allocated frontend IPs and ports. Which configuration should the engineer apply to implement it?
- Configure a private frontend IP in the Application Gateway subnet
- Configure the load balancer outbound rule and sufficient SNAT allocation
- Create a matching condition and redirect rule for the old path
- Set frontend rule and probe port to the actual backend listener
Explanation
Correct Answer
B:Configure the load balancer outbound rule and sufficient SNAT allocation is the operational configuration for use an explicit outbound rule with allocated frontend ips and ports. The acceptance test is to monitor SNAT port consumption while load testing outbound sessions.
Incorrect Answers
A:Configure a private frontend IP in the Application Gateway subnet is a concrete step for use an internal application gateway frontend ip. Here the selected design is use an explicit outbound rule with allocated frontend ips and ports, which instead requires configure the load balancer outbound rule and sufficient snat allocation.
C:Create a matching condition and redirect rule for the old path is a concrete step for use an azure front door rule set with a url redirect action. Here the selected design is use an explicit outbound rule with allocated frontend ips and ports, which instead requires configure the load balancer outbound rule and sufficient snat allocation.
D:Set frontend rule and probe port to the actual backend listener is a concrete step for create a tcp or https load balancer probe appropriate to service behavior. Here the selected design is use an explicit outbound rule with allocated frontend ips and ports, which instead requires configure the load balancer outbound rule and sufficient snat allocation.
Question 539
A public Load Balancer backend needs explicit outbound SNAT capacity for many simultaneous connections. After the team applies this change—configure the load balancer outbound rule and sufficient SNAT allocation—which validation best proves the intended result?
- Run a load test and inspect observed scale-out and latency
- Verify origin requests pass through Front Door while direct public access is restricted
- Monitor SNAT port consumption while load testing outbound sessions
- Disable primary service and confirm subsequent DNS responses prioritize backup
Explanation
Correct Answer
C:Monitor SNAT port consumption while load testing outbound sessions directly checks whether the intended outcome occurs, not merely whether a resource exists. If the check fails, investigate whether outbound SNAT ports are exhausted.
Incorrect Answers
A:Run a load test and inspect observed scale-out and latency. This concerns managed autoscale for uneven regional web traffic. Instead, monitor SNAT port consumption while load testing outbound sessions.
B:Verify origin requests pass through Front Door while direct public access is restricted. This concerns preventing direct public access to its origin. Instead, monitor SNAT port consumption while load testing outbound sessions.
D:Disable primary service and confirm subsequent DNS responses prioritize backup. This concerns traffic to shift automatically when its preferred endpoint fails. Instead, monitor SNAT port consumption while load testing outbound sessions.
Question 540
A public Load Balancer backend needs explicit outbound SNAT capacity for many simultaneous connections. During acceptance testing, external connection attempts fail under concurrency. Which underlying configuration problem best explains the symptom?
- Outbound SNAT ports are exhausted
- The URL path map or rule order sends requests to the wrong backend
- The path route references incompatible backend HTTP settings
- Rewrite rule set was not associated with the route
Explanation
Correct Answer
A:Outbound SNAT ports are exhausted explains the observed failure: external connection attempts fail under concurrency. Correct the design by using use an explicit outbound rule with allocated frontend IPs and ports, implemented through configure the load balancer outbound rule and sufficient SNAT allocation.
Incorrect Answers
B:The URL path map or rule order sends requests to the wrong backend. This concerns request-path routing between /API and /images on one public site. Here, outbound SNAT ports are exhausted.
C:The path route references incompatible backend HTTP settings. This concerns exposing different backends for billing and inventory through the same HTTPS address. Here, outbound SNAT ports are exhausted.
D:Rewrite rule set was not associated with the route. This concerns rewrite an inbound x-forwarded header without changing application code. Here, outbound SNAT ports are exhausted.
Designing and Implementing Microsoft Azure Networking Solutions (AZ-700) Practice Tests