Microsoft AZ-700 Exam Dumps, Practice Test Questions

100% Latest & Updated Microsoft AZ-700 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!

Microsoft AZ-700 Premium Bundle
$79.97
$59.98

AZ-700 Premium Bundle

  • Premium File: 406 Questions & Answers. Last update: Nov 12, 2026
  • Training Course: 64 Video Lectures
  • Study Guide: 762 Pages
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates

AZ-700 Premium Bundle

Microsoft AZ-700 Premium Bundle
  • Premium File: 406 Questions & Answers. Last update: Nov 12, 2026
  • Training Course: 64 Video Lectures
  • Study Guide: 762 Pages
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates
$79.97
$59.98

Microsoft AZ-700 Practice Test 6

Question 50

A VM needs a fixed private address that remains assigned after operating-system restarts. The architecture uses this design: Set the NIC's private IP allocation to Static in Azure. Which configuration should the engineer apply to implement it?

  1. Configure the NIC IP configuration with an available private address inside its subnet
  2. Inspect effective rules for the VM NIC including subnet and NIC scope
  3. Create the MX record set with the provider-supplied priority and hostname
  4. Set the subnet delegation to the supported Microsoft service type

Explanation

Correct Answer

A:

Configure the NIC IP configuration with an available private address inside its subnet is the operational configuration for set the nic's private ip allocation to static in azure. The acceptance test is to restart the guest and inspect Azure NIC configuration and observed host address.

Incorrect Answers

B:

Inspect effective rules for the VM NIC including subnet and NIC scope is a concrete step for use network watcher effective security rules. Here the selected design is set the nic's private ip allocation to static in azure, which instead requires configure the nic ip configuration with an available private address inside its subnet.

C:

Create the MX record set with the provider-supplied priority and hostname is a concrete step for publish the correct mx resource record in an azure public dns zone. Here the selected design is set the nic's private ip allocation to static in azure, which instead requires configure the nic ip configuration with an available private address inside its subnet.

D:

Set the subnet delegation to the supported Microsoft service type is a concrete step for use a dedicated subnet delegated to the correct resource provider. Here the selected design is set the nic's private ip allocation to static in azure, which instead requires configure the nic ip configuration with an available private address inside its subnet.

Question 51

A VM needs a fixed private address that remains assigned after operating-system restarts. After the team applies this change—configure the NIC IP configuration with an available private address inside its subnet—which validation best proves the intended result?

  1. Restart the guest and inspect Azure NIC configuration and observed host address
  2. Inspect subnet prefixes and provision one test NIC in each
  3. Inspect effective routes in the spoke for on-premises prefixes via the hub
  4. Deploy a new VM and inspect the automatically registered A record

Explanation

Correct Answer

A:

Restart the guest and inspect Azure NIC configuration and observed host address directly checks whether the intended outcome occurs, not merely whether a resource exists. If the check fails, investigate whether the Azure NIC IP allocation was left dynamic.

Incorrect Answers

B:

Inspect subnet prefixes and provision one test NIC in each. This concerns a migration adds a second application subnet without changing the first application's private ip space. Here, restart the guest and inspect Azure NIC configuration and observed host address.

C:

Inspect effective routes in the spoke for on-premises prefixes via the hub. This concerns using the hub's vpn gateway to communicate with an on-premises network. Here, restart the guest and inspect Azure NIC configuration and observed host address.

D:

Deploy a new VM and inspect the automatically registered A record. This concerns automatic hostname registration for its azure virtual machines. Here, restart the guest and inspect Azure NIC configuration and observed host address.

Question 52

A VM needs a fixed private address that remains assigned after operating-system restarts. During acceptance testing, the VM gets a different private address after replacement. Which underlying configuration problem best explains the symptom?

  1. The forwarding ruleset link is missing from the spoke
  2. The BGP session or route exchange with Route Server is not established
  3. The Azure NIC IP allocation was left dynamic
  4. Private DNS links were configured only for the first two spokes

Explanation

Correct Answer

C:

The Azure NIC IP allocation was left dynamic explains the observed failure: the VM gets a different private address after replacement. Correct the design by using set the NIC's private IP allocation to Static in Azure, implemented through configure the NIC IP configuration with an available private address inside its subnet.

Incorrect Answers

A:

The forwarding ruleset link is missing from the spoke. This concerns a private DNS forwarding ruleset available to multiple spokes. Here, the Azure NIC IP allocation was left dynamic.

B:

The BGP session or route exchange with Route Server is not established. This concerns azure to learn BGP routes from an existing virtual appliance. Here, the Azure NIC IP allocation was left dynamic.

D:

Private DNS links were configured only for the first two spokes. This concerns a shared hub contains a private DNS zone but only one of three spokes resolves it. Here, the Azure NIC IP allocation was left dynamic.

Question 53

A multihomed inspection appliance needs separate NICs for trusted and untrusted network segments. Which Azure networking design most directly satisfies this requirement?

  1. Add a distinct nonoverlapping subnet inside an available VNet prefix
  2. Use an Azure Private DNS zone linked to the relevant VNet
  3. Configure multiple reachable custom DNS server IPs for the VNet
  4. Assign the appliance NICs to valid, segregated subnets within one VNet

Explanation

Correct Answer

D:

Assign the appliance NICs to valid, segregated subnets within one VNet addresses the topology, access or delivery requirement in the scenario. Apply it by attach supported NIC IP configurations to the distinct workload subnets; confirm by check effective subnet attachment and route behavior for both NICs.

Incorrect Answers

A:

Add a distinct nonoverlapping subnet inside an available VNet prefix. This concerns a migration adds a second application subnet without changing the first application's private IP space. Instead, assign the appliance NICs to valid, segregated subnets within one VNet.

B:

Use an Azure Private DNS zone linked to the relevant VNet. This is relevant when an internal hostname that should never appear in public DNS. Instead, assign the appliance NICs to valid, segregated subnets within one VNet.

C:

Configure multiple reachable custom DNS server IPs for the VNet. This concerns failover if one resolver is offline. Instead, assign the appliance NICs to valid, segregated subnets within one VNet.

Question 54

A multihomed inspection appliance needs separate NICs for trusted and untrusted network segments. The architecture uses this design: Assign the appliance NICs to valid, segregated subnets within one VNet. Which configuration should the engineer apply to implement it?

  1. Enable the supported BGP propagation path and review spoke effective routes
  2. Create a Standard static public IP in a compatible region and attach it to the frontend
  3. Attach supported NIC IP configurations to the distinct workload subnets
  4. Select the subnet in the route table Subnets association settings

Explanation

Correct Answer

C:

Attach supported NIC IP configurations to the distinct workload subnets is the operational configuration for assign the appliance nics to valid, segregated subnets within one vnet. The acceptance test is to check effective subnet attachment and route behavior for both NICs.

Incorrect Answers

A:

Enable the supported BGP propagation path and review spoke effective routes is a concrete step for validate route propagation and route selection from the connected hub. Here the selected design is assign the appliance nics to valid, segregated subnets within one vnet, which instead requires attach supported nic ip configurations to the distinct workload subnets.

B:

Create a Standard static public IP in a compatible region and attach it to the frontend is a concrete step for use a static standard sku public ip with the public load balancer frontend. Here the selected design is assign the appliance nics to valid, segregated subnets within one vnet, which instead requires attach supported nic ip configurations to the distinct workload subnets.

D:

Select the subnet in the route table Subnets association settings is a concrete step for associate the route table with the vm's subnet. Here the selected design is assign the appliance nics to valid, segregated subnets within one vnet, which instead requires attach supported nic ip configurations to the distinct workload subnets.

Question 55

A multihomed inspection appliance needs separate NICs for trusted and untrusted network segments. After the team applies this change—attach supported NIC IP configurations to the distinct workload subnets—which validation best proves the intended result?

  1. Check effective subnet attachment and route behavior for both NICs
  2. Review the VM NIC effective routes after the association
  3. Inspect effective routes in the spoke for on-premises prefixes via the hub
  4. Review subnet delegation and validate the platform deployment

Explanation

Correct Answer

A:

Check effective subnet attachment and route behavior for both NICs directly checks whether the intended outcome occurs, not merely whether a resource exists. If the check fails, investigate whether its NIC is attached to the wrong subnet or not configured.

Incorrect Answers

B:

Review the VM NIC effective routes after the association. This is relevant when a route table is created but its udrs have no effect on an application vm. Instead, check effective subnet attachment and route behavior for both NICs.

C:

Inspect effective routes in the spoke for on-premises prefixes via the hub. This concerns using the hub's vpn gateway to communicate with an on-premises network. Instead, check effective subnet attachment and route behavior for both NICs.

D:

Review subnet delegation and validate the platform deployment. This concerns retaining separation from general-purpose virtual machines. Instead, check effective subnet attachment and route behavior for both NICs.

Question 56

A multihomed inspection appliance needs separate NICs for trusted and untrusted network segments. During acceptance testing, the appliance cannot receive traffic on the intended second segment. Which underlying configuration problem best explains the symptom?

  1. Its NIC is attached to the wrong subnet or not configured
  2. The default UDR or propagated route sends traffic to the wrong next hop
  3. The route table was never associated with the workload subnet
  4. Private DNS links were configured only for the first two spokes

Explanation

Correct Answer

A:

Its NIC is attached to the wrong subnet or not configured explains the observed failure: the appliance cannot receive traffic on the intended second segment. Correct the design by using assign the appliance NICs to valid, segregated subnets within one VNet, implemented through attach supported NIC IP configurations to the distinct workload subnets.

Incorrect Answers

B:

The default UDR or propagated route sends traffic to the wrong next hop. This concerns sending all internet-bound traffic to an on-premises perimeter. Here, its NIC is attached to the wrong subnet or not configured.

C:

The route table was never associated with the workload subnet. This is relevant when a route table is created but its udrs have no effect on an application vm. Here, its NIC is attached to the wrong subnet or not configured.

D:

Private DNS links were configured only for the first two spokes. This concerns a shared hub contains a private DNS zone but only one of three spokes resolves it. Here, its NIC is attached to the wrong subnet or not configured.

Question 57

A business wants outbound public IP assignment from a common address pool for multiple application tiers. Which Azure networking design most directly satisfies this requirement?

  1. Attach outbound NAT resources to each intended workload subnet
  2. Compare peering flags, NSGs and each spoke's effective route set
  3. Use Azure DNS Private Resolver with inbound and outbound resolution paths
  4. Avoid attaching unnecessary public IPs to VM NICs and use subnet NAT Gateway

Explanation

Correct Answer

A:

Attach outbound NAT resources to each intended workload subnet addresses the topology, access or delivery requirement in the scenario. Apply it by associate the configured NAT Gateway with both application subnets; confirm by verify VMs in both subnets show the approved shared egress IPs.

Incorrect Answers

B:

Compare peering flags, NSGs and each spoke's effective route set. This is relevant when an application behind a hub NVA is reachable from one spoke but not another. Instead, attach outbound NAT resources to each intended workload subnet.

C:

Use Azure DNS Private Resolver with inbound and outbound resolution paths. This concerns resolving an internal name in Azure and an on-premises name over hybrid connectivity. Instead, attach outbound NAT resources to each intended workload subnet.

D:

Avoid attaching unnecessary public IPs to VM NICs and use subnet NAT Gateway. This concerns private VM interfaces but only a central NAT resource exposed to the internet. Instead, attach outbound NAT resources to each intended workload subnet.

Question 58

A business wants outbound public IP assignment from a common address pool for multiple application tiers. The architecture uses this design: Attach outbound NAT resources to each intended workload subnet. Which configuration should the engineer apply to implement it?

  1. Associate the configured NAT Gateway with both application subnets
  2. Remove direct VM public IP attachments and configure NAT Gateway egress
  3. Apply an appropriate 0.0.0.0/0 UDR to the workload subnet with the inspection next hop
  4. Create the MX record set with the provider-supplied priority and hostname

Explanation

Correct Answer

A:

Associate the configured NAT Gateway with both application subnets is the operational configuration for attach outbound nat resources to each intended workload subnet. The acceptance test is to verify VMs in both subnets show the approved shared egress IPs.

Incorrect Answers

B:

Remove direct VM public IP attachments and configure NAT Gateway egress is a concrete step for avoid attaching unnecessary public ips to vm nics and use subnet nat gateway. Here the selected design is attach outbound nat resources to each intended workload subnet, which instead requires associate the configured nat gateway with both application subnets.

C:

Apply an appropriate 0.0.0.0/0 UDR to the workload subnet with the inspection next hop is a concrete step for configure forced tunneling through a virtual appliance or hybrid gateway. Here the selected design is attach outbound nat resources to each intended workload subnet, which instead requires associate the configured nat gateway with both application subnets.

D:

Create the MX record set with the provider-supplied priority and hostname is a concrete step for publish the correct mx resource record in an azure public dns zone. Here the selected design is attach outbound nat resources to each intended workload subnet, which instead requires associate the configured nat gateway with both application subnets.

Question 59

A business wants outbound public IP assignment from a common address pool for multiple application tiers. After the team applies this change—associate the configured NAT Gateway with both application subnets—which validation best proves the intended result?

  1. Create reciprocal peering and verify no overlapping prefixes remain
  2. Inspect both forward and reverse paths through the firewall
  3. Inspect the private endpoint NIC private address and approved connection
  4. Verify VMs in both subnets show the approved shared egress IPs

Explanation

Correct Answer

D:

Verify VMs in both subnets show the approved shared egress IPs directly checks whether the intended outcome occurs, not merely whether a resource exists. If the check fails, investigate whether its subnet was omitted from the NAT Gateway association.

Incorrect Answers

A:

Create reciprocal peering and verify no overlapping prefixes remain. This concerns two peered vnets cannot reach one another because each deploys the same subnet prefix. Instead, verify VMs in both subnets show the approved shared egress IPs.

B:

Inspect both forward and reverse paths through the firewall. This concerns permit service chaining through a firewall shared by multiple spokes. Instead, verify VMs in both subnets show the approved shared egress IPs.

C:

Inspect the private endpoint NIC private address and approved connection. This concerns having an address in a planned network segment. Instead, verify VMs in both subnets show the approved shared egress IPs.

Question 60

A business wants outbound public IP assignment from a common address pool for multiple application tiers. During acceptance testing, one tier still uses its default outbound path. Which underlying configuration problem best explains the symptom?

  1. The route table was never associated with the workload subnet
  2. Its UDR, peering forwarded-traffic flag or NSG differs from the functioning spoke
  3. Its subnet was omitted from the NAT Gateway association
  4. Effective security rules from both attachment levels were not considered

Explanation

Correct Answer

C:

Its subnet was omitted from the NAT Gateway association explains the observed failure: one tier still uses its default outbound path. Correct the design by using attach outbound NAT resources to each intended workload subnet, implemented through associate the configured NAT Gateway with both application subnets.

Incorrect Answers

A:

The route table was never associated with the workload subnet. This is relevant when a route table is created but its udrs have no effect on an application vm. Here, its subnet was omitted from the NAT Gateway association.

B:

Its UDR, peering forwarded-traffic flag or NSG differs from the functioning spoke. This is relevant when an application behind a hub nva is reachable from one spoke but not another. Here, its subnet was omitted from the NAT Gateway association.

D:

Effective security rules from both attachment levels were not considered. This concerns identifying effective network security rules after overlapping NSG associations. Here, its subnet was omitted from the NAT Gateway association.

Designing and Implementing Microsoft Azure Networking Solutions (AZ-700) Practice Tests

UP

SPECIAL OFFER: GET 10% OFF

This is ONE TIME OFFER

ExamSnap Discount Offer
Enter Your Email Address to Receive Your 10% Off Discount Code

A confirmation link will be sent to this email address to verify your login. *We value your privacy. We will not rent or sell your email address.

Download Free Demo of VCE Exam Simulator

Experience Avanset VCE Exam Simulator for yourself.

Simply submit your e-mail address below to get started with our interactive software demo of your free trial.

Free Demo Limits: In the demo version you will be able to access only first 5 questions from exam.