Microsoft AZ-700 Exam Dumps, Practice Test Questions

100% Latest & Updated Microsoft AZ-700 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!

Microsoft AZ-700 Premium Bundle
$79.97
$59.98

AZ-700 Premium Bundle

  • Premium File: 406 Questions & Answers. Last update: Nov 12, 2026
  • Training Course: 64 Video Lectures
  • Study Guide: 762 Pages
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates

AZ-700 Premium Bundle

Microsoft AZ-700 Premium Bundle
  • Premium File: 406 Questions & Answers. Last update: Nov 12, 2026
  • Training Course: 64 Video Lectures
  • Study Guide: 762 Pages
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates
$79.97
$59.98

Microsoft AZ-700 Practice Test 7

Question 60

A business wants outbound public IP assignment from a common address pool for multiple application tiers. During acceptance testing, one tier still uses its default outbound path. Which underlying configuration problem best explains the symptom?

  1. The route table was never associated with the workload subnet
  2. Its UDR, peering forwarded-traffic flag or NSG differs from the functioning spoke
  3. Its subnet was omitted from the NAT Gateway association
  4. Effective security rules from both attachment levels were not considered

Explanation

Correct Answer

C:

Its subnet was omitted from the NAT Gateway association explains the observed failure: one tier still uses its default outbound path. Correct the design by using attach outbound NAT resources to each intended workload subnet, implemented through associate the configured NAT Gateway with both application subnets.

Incorrect Answers

A:

The route table was never associated with the workload subnet. This is relevant when a route table is created but its udrs have no effect on an application vm. Here, its subnet was omitted from the NAT Gateway association.

B:

Its UDR, peering forwarded-traffic flag or NSG differs from the functioning spoke. This is relevant when an application behind a hub nva is reachable from one spoke but not another. Here, its subnet was omitted from the NAT Gateway association.

D:

Effective security rules from both attachment levels were not considered. This concerns identifying effective network security rules after overlapping NSG associations. Here, its subnet was omitted from the NAT Gateway association.

Question 61

A hub team wants route-aware service placement before defining the hub address blocks. Which Azure networking design most directly satisfies this requirement?

  1. Implement VNet peering with reciprocal connections
  2. Place subnet outbound connections behind a NAT Gateway
  3. Use Azure NAT Gateway for predictable subnet outbound SNAT
  4. Reserve address space for gateway, firewall, Bastion and workload subnets before peering

Explanation

Correct Answer

D:

Reserve address space for gateway, firewall, Bastion and workload subnets before peering addresses the topology, access or delivery requirement in the scenario. Apply it by prepare a hub VNet CIDR plan that accounts for required service subnets; confirm by inspect the resulting address plan against all service subnet minimum sizes.

Incorrect Answers

A:

Implement VNet peering with reciprocal connections. This concerns two Azure VNets in the same tenant require private low-latency connectivity without routing through the internet. Here, reserve address space for gateway, firewall, Bastion and workload subnets before peering.

B:

Place subnet outbound connections behind a NAT Gateway. This concerns egress IP consistency during VM scale-in and scale-out. Here, reserve address space for gateway, firewall, Bastion and workload subnets before peering.

C:

Use Azure NAT Gateway for predictable subnet outbound SNAT. This concerns outbound access but must not have unsolicited inbound internet connectivity. Here, reserve address space for gateway, firewall, Bastion and workload subnets before peering.

Question 62

A hub team wants route-aware service placement before defining the hub address blocks. The architecture uses this design: Reserve address space for gateway, firewall, Bastion and workload subnets before peering. Which configuration should the engineer apply to implement it?

  1. Set Allow forwarded traffic as required and install UDRs toward the NVA
  2. Attach supported NIC IP configurations to the distinct workload subnets
  3. Configure the VNet DNS server list to reachable domain controller IPs
  4. Prepare a hub VNet CIDR plan that accounts for required service subnets

Explanation

Correct Answer

D:

Prepare a hub VNet CIDR plan that accounts for required service subnets is the operational configuration for reserve address space for gateway, firewall, bastion and workload subnets before peering. The acceptance test is to inspect the resulting address plan against all service subnet minimum sizes.

Incorrect Answers

A:

Set Allow forwarded traffic as required and install UDRs toward the NVA is a concrete step for enable forwarded traffic on the necessary peering connections and use correct routes. Here the selected design is reserve address space for gateway, firewall, bastion and workload subnets before peering, which instead requires prepare a hub vnet cidr plan that accounts for required service subnets.

B:

Attach supported NIC IP configurations to the distinct workload subnets is a concrete step for assign the appliance nics to valid, segregated subnets within one vnet. Here the selected design is reserve address space for gateway, firewall, bastion and workload subnets before peering, which instead requires prepare a hub vnet cidr plan that accounts for required service subnets.

C:

Configure the VNet DNS server list to reachable domain controller IPs is a concrete step for set vnet custom dns server addresses and renew or restart affected guest resolvers. Here the selected design is reserve address space for gateway, firewall, bastion and workload subnets before peering, which instead requires prepare a hub vnet cidr plan that accounts for required service subnets.

Question 63

A hub team wants route-aware service placement before defining the hub address blocks. After the team applies this change—prepare a hub VNet CIDR plan that accounts for required service subnets—which validation best proves the intended result?

  1. Deploy a new VM and inspect the automatically registered A record
  2. Query the alias and inspect its canonical target
  3. Review subnet delegation and validate the platform deployment
  4. Inspect the resulting address plan against all service subnet minimum sizes

Explanation

Correct Answer

D:

Inspect the resulting address plan against all service subnet minimum sizes directly checks whether the intended outcome occurs, not merely whether a resource exists. If the check fails, investigate whether the hub allocation failed to reserve adequate gateway subnet space.

Incorrect Answers

A:

Deploy a new VM and inspect the automatically registered A record. This concerns automatic hostname registration for its azure virtual machines. Instead, inspect the resulting address plan against all service subnet minimum sizes.

B:

Query the alias and inspect its canonical target. This concerns preserving a stable human-readable alias. Instead, inspect the resulting address plan against all service subnet minimum sizes.

C:

Review subnet delegation and validate the platform deployment. This concerns retaining separation from general-purpose virtual machines. Instead, inspect the resulting address plan against all service subnet minimum sizes.

Question 64

A hub team wants route-aware service placement before defining the hub address blocks. During acceptance testing, an Azure gateway cannot be deployed without resizing the hub network. Which underlying configuration problem best explains the symptom?

  1. The hub allocation failed to reserve adequate gateway subnet space
  2. Outbound traffic depended on per-instance public IPs instead of subnet NAT
  3. NAT Gateway association or public IP SNAT capacity is insufficient
  4. The route table was never associated with the workload subnet

Explanation

Correct Answer

A:

The hub allocation failed to reserve adequate gateway subnet space explains the observed failure: an Azure gateway cannot be deployed without resizing the hub network. Correct the design by using reserve address space for gateway, firewall, Bastion and workload subnets before peering, implemented through prepare a hub VNet CIDR plan that accounts for required service subnets.

Incorrect Answers

B:

Outbound traffic depended on per-instance public IPs instead of subnet NAT. This concerns egress ip consistency during vm scale-in and scale-out. Here, the hub allocation failed to reserve adequate gateway subnet space.

C:

NAT Gateway association or public IP SNAT capacity is insufficient. This concerns scalable outbound connectivity from several subnets without public ips on the vms. Here, the hub allocation failed to reserve adequate gateway subnet space.

D:

The route table was never associated with the workload subnet. This is relevant when a route table is created but its udrs have no effect on an application vm. Here, the hub allocation failed to reserve adequate gateway subnet space.

Question 65

A regulated service requires both its public ingress and outbound source IP addresses to remain fixed. Which Azure networking design most directly satisfies this requirement?

  1. Use separate static Standard public IP resources for explicit ingress and egress
  2. Publish the correct MX resource record in an Azure public DNS zone
  3. Attach outbound NAT resources to each intended workload subnet
  4. Configure supported Azure public DNS A/alias and www record mappings

Explanation

Correct Answer

A:

Use separate static Standard public IP resources for explicit ingress and egress addresses the topology, access or delivery requirement in the scenario. Apply it by attach the ingress address to its frontend and assign egress addresses to NAT Gateway; confirm by verify inbound DNS frontend mapping and outbound observed source IPs separately.

Incorrect Answers

B:

Publish the correct MX resource record in an Azure public DNS zone. This concerns direct mail to an externally hosted mail service. Instead, use separate static Standard public IP resources for explicit ingress and egress.

C:

Attach outbound NAT resources to each intended workload subnet. This concerns outbound public IP assignment from a common address pool for multiple application tiers. Instead, use separate static Standard public IP resources for explicit ingress and egress.

D:

Configure supported Azure public DNS A/alias and www record mappings. This concerns being reachable at both apex and www with proper public DNS. Instead, use separate static Standard public IP resources for explicit ingress and egress.

Question 66

A regulated service requires both its public ingress and outbound source IP addresses to remain fixed. The architecture uses this design: Use separate static Standard public IP resources for explicit ingress and egress. Which configuration should the engineer apply to implement it?

  1. Attach the ingress address to its frontend and assign egress addresses to NAT Gateway
  2. Attach supported NIC IP configurations to the distinct workload subnets
  3. Set primary and secondary DNS server addresses and validate route reachability
  4. Add separate environment-specific A records with their private addresses

Explanation

Correct Answer

A:

Attach the ingress address to its frontend and assign egress addresses to NAT Gateway is the operational configuration for use separate static standard public ip resources for explicit ingress and egress. The acceptance test is to verify inbound DNS frontend mapping and outbound observed source IPs separately.

Incorrect Answers

B:

Attach supported NIC IP configurations to the distinct workload subnets is a concrete step for assign the appliance nics to valid, segregated subnets within one vnet. Here the selected design is use separate static standard public ip resources for explicit ingress and egress, which instead requires attach the ingress address to its frontend and assign egress addresses to nat gateway.

C:

Set primary and secondary DNS server addresses and validate route reachability is a concrete step for configure multiple reachable custom dns server ips for the vnet. Here the selected design is use separate static standard public ip resources for explicit ingress and egress, which instead requires attach the ingress address to its frontend and assign egress addresses to nat gateway.

D:

Add separate environment-specific A records with their private addresses is a concrete step for create distinct private dns record sets within the appropriate zone. Here the selected design is use separate static standard public ip resources for explicit ingress and egress, which instead requires attach the ingress address to its frontend and assign egress addresses to nat gateway.

Question 67

A regulated service requires both its public ingress and outbound source IP addresses to remain fixed. After the team applies this change—attach the ingress address to its frontend and assign egress addresses to NAT Gateway—which validation best proves the intended result?

  1. Verify deployment and inspect the subnet delegation property
  2. Verify inbound DNS frontend mapping and outbound observed source IPs separately
  3. Inspect effective default route and trace an outbound flow
  4. Scale the VM set and observe unchanged external source addresses

Explanation

Correct Answer

B:

Verify inbound DNS frontend mapping and outbound observed source IPs separately directly checks whether the intended outcome occurs, not merely whether a resource exists. If the check fails, investigate whether inbound frontend binding does not define outbound SNAT behavior.

Incorrect Answers

A:

Verify deployment and inspect the subnet delegation property. This concerns exclusive delegation. Instead, verify inbound DNS frontend mapping and outbound observed source IPs separately.

C:

Inspect effective default route and trace an outbound flow. This concerns sending all internet-bound traffic to an on-premises perimeter. Instead, verify inbound DNS frontend mapping and outbound observed source IPs separately.

D:

Scale the VM set and observe unchanged external source addresses. This concerns egress ip consistency during vm scale-in and scale-out. Instead, verify inbound DNS frontend mapping and outbound observed source IPs separately.

Question 68

A regulated service requires both its public ingress and outbound source IP addresses to remain fixed. During acceptance testing, outbound traffic uses an address different from the allowlisted ingress IP. Which underlying configuration problem best explains the symptom?

  1. Inbound frontend binding does not define outbound SNAT behavior
  2. The outbound forwarding rule or target DNS reachability is missing
  3. The branch forwarder or hybrid path to the inbound resolver is absent
  4. Outbound traffic depended on per-instance public IPs instead of subnet NAT

Explanation

Correct Answer

A:

Inbound frontend binding does not define outbound SNAT behavior explains the observed failure: outbound traffic uses an address different from the allowlisted ingress IP. Correct the design by using use separate static Standard public IP resources for explicit ingress and egress, implemented through attach the ingress address to its frontend and assign egress addresses to NAT Gateway.

Incorrect Answers

B:

The outbound forwarding rule or target DNS reachability is missing. This concerns resolving an internal name in azure and an on-premises name over hybrid connectivity. Here, inbound frontend binding does not define outbound SNAT behavior.

C:

The branch forwarder or hybrid path to the inbound resolver is absent. This concerns resolving azure private DNS records without manually creating duplicates. Here, inbound frontend binding does not define outbound SNAT behavior.

D:

Outbound traffic depended on per-instance public IPs instead of subnet NAT. This concerns egress ip consistency during vm scale-in and scale-out. Here, inbound frontend binding does not define outbound SNAT behavior.

Question 69

A fleet of regional virtual networks must scale without manual IP conflicts. Which Azure networking design most directly satisfies this requirement?

  1. Maintain centrally governed subnet plans with disjoint regional CIDRs
  2. Place subnet outbound connections behind a NAT Gateway
  3. Use a dedicated subnet delegated to the correct resource provider
  4. Implement VNet peering with reciprocal connections

Explanation

Correct Answer

A:

Maintain centrally governed subnet plans with disjoint regional CIDRs addresses the topology, access or delivery requirement in the scenario. Apply it by reserve address prefixes in a shared IPAM-style plan before creating VNets; confirm by run a cross-VNet overlap report and validate new allocations.

Incorrect Answers

B:

Place subnet outbound connections behind a NAT Gateway. This concerns egress IP consistency during VM scale-in and scale-out. Instead, maintain centrally governed subnet plans with disjoint regional CIDRs.

C:

Use a dedicated subnet delegated to the correct resource provider. This concerns exclusive delegation. Instead, maintain centrally governed subnet plans with disjoint regional CIDRs.

D:

Implement VNet peering with reciprocal connections. This concerns two Azure VNets in the same tenant require private low-latency connectivity without routing through the internet. Instead, maintain centrally governed subnet plans with disjoint regional CIDRs.

Question 70

A fleet of regional virtual networks must scale without manual IP conflicts. The architecture uses this design: Maintain centrally governed subnet plans with disjoint regional CIDRs. Which configuration should the engineer apply to implement it?

  1. Add the missing zone links without creating a conflicting duplicate zone
  2. Associate a DDoS protection plan and configure telemetry alerts
  3. Configure the NIC IP configuration with an available private address inside its subnet
  4. Reserve address prefixes in a shared IPAM-style plan before creating VNets

Explanation

Correct Answer

D:

Reserve address prefixes in a shared IPAM-style plan before creating VNets is the operational configuration for maintain centrally governed subnet plans with disjoint regional cidrs. The acceptance test is to run a cross-VNet overlap report and validate new allocations.

Incorrect Answers

A:

Add the missing zone links without creating a conflicting duplicate zone is a concrete step for attach private dns zone virtual network links to each required spoke. Here the selected design is maintain centrally governed subnet plans with disjoint regional cidrs, which instead requires reserve address prefixes in a shared ipam-style plan before creating vnets.

B:

Associate a DDoS protection plan and configure telemetry alerts is a concrete step for enable and monitor azure ddos protection on applicable public-ip vnets. Here the selected design is maintain centrally governed subnet plans with disjoint regional cidrs, which instead requires reserve address prefixes in a shared ipam-style plan before creating vnets.

C:

Configure the NIC IP configuration with an available private address inside its subnet is a concrete step for set the nic's private ip allocation to static in azure. Here the selected design is maintain centrally governed subnet plans with disjoint regional cidrs, which instead requires reserve address prefixes in a shared ipam-style plan before creating vnets.

Designing and Implementing Microsoft Azure Networking Solutions (AZ-700) Practice Tests

UP

SPECIAL OFFER: GET 10% OFF

This is ONE TIME OFFER

ExamSnap Discount Offer
Enter Your Email Address to Receive Your 10% Off Discount Code

A confirmation link will be sent to this email address to verify your login. *We value your privacy. We will not rent or sell your email address.

Download Free Demo of VCE Exam Simulator

Experience Avanset VCE Exam Simulator for yourself.

Simply submit your e-mail address below to get started with our interactive software demo of your free trial.

Free Demo Limits: In the demo version you will be able to access only first 5 questions from exam.