100% Latest & Updated Microsoft AZ-700 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!
Question 680
A worldwide service needs to select an origin based on latency and backend health. During acceptance testing, requests are consistently sent to a degraded high-latency origin. Which underlying configuration problem best explains the symptom?
- Gateway backend trust or HTTPS settings are incomplete
- The cross-region backend or health design is incomplete
- Origin group health or latency settings do not reflect actual conditions
- The path route references incompatible backend HTTP settings
Explanation
Correct Answer
C:Origin group health or latency settings do not reflect actual conditions explains the observed failure: requests are consistently sent to a degraded high-latency origin. Correct the design by using configure Front Door origin load balancing with appropriate latency sensitivity and priority, implemented through set origin group probe, priority and load-balancing parameters.
Incorrect Answers
A:Gateway backend trust or HTTPS settings are incomplete. This concerns keeping TLS termination at the gateway but re-encrypt to internal web servers. Here, origin group health or latency settings do not reflect actual conditions.
B:The cross-region backend or health design is incomplete. This concerns cross-region failover of regional load balancers. Here, origin group health or latency settings do not reflect actual conditions.
D:The path route references incompatible backend HTTP settings. This concerns exposing different backends for billing and inventory through the same HTTPS address. Here, origin group health or latency settings do not reflect actual conditions.
Question 681
A regulated VM must reach its Azure Storage account without using a public service endpoint. Which Azure networking design most directly satisfies this requirement?
- Apply the policy to the exact production subnet and verify service endpoint enabled
- Share its Private DNS zone with both spokes using VNet links
- Use an Azure Private Endpoint for the storage subresource
- Prefer Private Link when the service must be reached by a private IP over hybrid links
Explanation
Correct Answer
C:Use an Azure Private Endpoint for the storage subresource addresses the topology, access or delivery requirement in the scenario. Apply it by create a storage private endpoint in a VNet subnet and approve its connection; confirm by resolve the storage FQDN to a private IP and perform a storage operation.
Incorrect Answers
A:Apply the policy to the exact production subnet and verify service endpoint enabled. This concerns a service endpoint policy works in development but not in the production subnet. Instead, use an Azure Private Endpoint for the storage subresource.
B:Share its Private DNS zone with both spokes using VNet links. This concerns a private endpoint resolves from one spoke but not from another connected VNet. Instead, use an Azure Private Endpoint for the storage subresource.
D:Prefer Private Link when the service must be reached by a private IP over hybrid links. This concerns a design compares private endpoints and service endpoints for inbound access from a branch network. Instead, use an Azure Private Endpoint for the storage subresource.
Question 682
A regulated VM must reach its Azure Storage account without using a public service endpoint. The architecture uses this design: Use an Azure Private Endpoint for the storage subresource. Which configuration should the engineer apply to implement it?
- Create a storage private endpoint in a VNet subnet and approve its connection
- Deploy a private endpoint and hybrid DNS forwarding rather than only a service endpoint
- Create conditional forwarding on custom DNS and ensure forwarding target reachability
- Inspect service endpoint and policy association properties for both subnets
Explanation
Correct Answer
A:Create a storage private endpoint in a VNet subnet and approve its connection is the operational configuration for use an azure private endpoint for the storage subresource. The acceptance test is to resolve the storage FQDN to a private IP and perform a storage operation.
Incorrect Answers
B:Deploy a private endpoint and hybrid DNS forwarding rather than only a service endpoint is a concrete step for prefer private link when the service must be reached by a private ip over hybrid links. Here the selected design is use an azure private endpoint for the storage subresource, which instead requires create a storage private endpoint in a vnet subnet and approve its connection.
C:Create conditional forwarding on custom DNS and ensure forwarding target reachability is a concrete step for forward relevant private dns suffix queries toward an azure private resolver. Here the selected design is use an azure private endpoint for the storage subresource, which instead requires create a storage private endpoint in a vnet subnet and approve its connection.
D:Inspect service endpoint and policy association properties for both subnets is a concrete step for apply the policy to the exact production subnet and verify service endpoint enabled. Here the selected design is use an azure private endpoint for the storage subresource, which instead requires create a storage private endpoint in a vnet subnet and approve its connection.
Question 683
A regulated VM must reach its Azure Storage account without using a public service endpoint. After the team applies this change—create a storage private endpoint in a VNet subnet and approve its connection—which validation best proves the intended result?
- Compare effective connectivity to allowed and blocked storage accounts
- Resolve the storage FQDN to a private IP and perform a storage operation
- Query a permitted and a disallowed storage resource from the subnet
- Have a consumer create a private endpoint and reach the service privately
Explanation
Correct Answer
B:Resolve the storage FQDN to a private IP and perform a storage operation directly checks whether the intended outcome occurs, not merely whether a resource exists. If the check fails, investigate whether private endpoint DNS integration is missing.
Incorrect Answers
A:Compare effective connectivity to allowed and blocked storage accounts. This concerns a service endpoint policy works in development but not in the production subnet. Instead, resolve the storage FQDN to a private IP and perform a storage operation.
C:Query a permitted and a disallowed storage resource from the subnet. This concerns resource-level governance over which azure storage accounts a VNet may access. Instead, resolve the storage FQDN to a private IP and perform a storage operation.
D:Have a consumer create a private endpoint and reach the service privately. This concerns a vendor provides a custom azure service behind its own internal standard load balancer. Instead, resolve the storage FQDN to a private IP and perform a storage operation.
Question 684
A regulated VM must reach its Azure Storage account without using a public service endpoint. During acceptance testing, the storage client uses a public destination IP. Which underlying configuration problem best explains the symptom?
- The storage network ACL is too broad
- Private endpoint DNS integration is missing
- Only development's subnet has the service endpoint policy attached
- The endpoint policy scope or association is incorrect
Explanation
Correct Answer
B:Private endpoint DNS integration is missing explains the observed failure: the storage client uses a public destination IP. Correct the design by using use an Azure Private Endpoint for the storage subresource, implemented through create a storage private endpoint in a VNet subnet and approve its connection.
Incorrect Answers
A:The storage network ACL is too broad. This concerns allowing only clients from a designated application subnet. Here, private endpoint DNS integration is missing.
C:Only development's subnet has the service endpoint policy attached. This concerns a service endpoint policy works in development but not in the production subnet. Here, private endpoint DNS integration is missing.
D:The endpoint policy scope or association is incorrect. This concerns resource-level governance over which azure storage accounts a VNet may access. Here, private endpoint DNS integration is missing.
Question 685
A hosted SQL database needs to be reachable privately from an application VNet. Which TWO listed choices identify the suitable Azure design and the concrete configuration required to implement it? (Choose TWO.)
- Create private endpoint connection to the SQL server and approve it
- Enable service endpoint and add the specific subnet to allowed network rules
- Enable a Microsoft.Storage virtual network service endpoint
- Use an Azure SQL Database Private Endpoint with correct subresource
- Use supported Private Link Service visibility and approval controls
Explanation
Correct Answers
A:Create private endpoint connection to the SQL server and approve it is the operational configuration for use an azure sql database private endpoint with correct subresource. The acceptance test is to resolve the SQL server hostname to the endpoint IP from the application VNet.
D:Use an Azure SQL Database Private Endpoint with correct subresource addresses the topology, access or delivery requirement in the scenario. Apply it by create private endpoint connection to the SQL server and approve it; confirm by resolve the SQL server hostname to the endpoint IP from the application VNet.
Incorrect Answers
B:Enable service endpoint and add the specific subnet to allowed network rules is a concrete step for use service endpoint-based virtual network access rules on the storage account. Here the selected design is use an azure sql database private endpoint with correct subresource, which instead requires create private endpoint connection to the sql server and approve it.
C:Enable a Microsoft.Storage virtual network service endpoint. This concerns a higher-trust path to Azure Storage while retaining the service's public endpoint. Instead, create private endpoint connection to the SQL server and approve it.
E:Use supported Private Link Service visibility and approval controls. This concerns identifying different consumer connections. Instead, create private endpoint connection to the SQL server and approve it.
Question 686
A hosted SQL database needs to be reachable privately from an application VNet. The architecture uses this design: Use an Azure SQL Database Private Endpoint with correct subresource. Which configuration should the engineer apply to implement it?
- Enable service endpoint and add the specific subnet to allowed network rules
- Create private endpoint connection to the SQL server and approve it
- Enable the Storage service endpoint on the subnet and allow the subnet in storage firewall rules
- Advertise reachable endpoint subnet paths and forward DNS to an Azure resolver
Explanation
Correct Answer
B:Create private endpoint connection to the SQL server and approve it is the operational configuration for use an azure sql database private endpoint with correct subresource. The acceptance test is to resolve the SQL server hostname to the endpoint IP from the application VNet.
Incorrect Answers
A:Enable service endpoint and add the specific subnet to allowed network rules is a concrete step for use service endpoint-based virtual network access rules on the storage account. Here the selected design is use an azure sql database private endpoint with correct subresource, which instead requires create private endpoint connection to the sql server and approve it.
C:Enable the Storage service endpoint on the subnet and allow the subnet in storage firewall rules is a concrete step for enable a microsoft.storage virtual network service endpoint. Here the selected design is use an azure sql database private endpoint with correct subresource, which instead requires create private endpoint connection to the sql server and approve it.
D:Advertise reachable endpoint subnet paths and forward DNS to an Azure resolver is a concrete step for provide hybrid routing plus conditional dns forwarding to the private endpoint address. Here the selected design is use an azure sql database private endpoint with correct subresource, which instead requires create private endpoint connection to the sql server and approve it.
Question 687
A hosted SQL database needs to be reachable privately from an application VNet. After the team applies this change—create private endpoint connection to the SQL server and approve it—which validation best proves the intended result?
- Resolve the SQL server hostname to the endpoint IP from the application VNet
- Check endpoint connection target and perform an authorized operation
- Retry storage operations from the approved subnet
- Query a permitted and a disallowed storage resource from the subnet
Explanation
Correct Answer
A:Resolve the SQL server hostname to the endpoint IP from the application VNet directly checks whether the intended outcome occurs, not merely whether a resource exists. If the check fails, investigate whether private link DNS zone or link does not provide the private answer.
Incorrect Answers
B:Check endpoint connection target and perform an authorized operation. This concerns a new private endpoint points at the wrong azure storage account. Instead, resolve the SQL server hostname to the endpoint IP from the application VNet.
C:Retry storage operations from the approved subnet. This is relevant when a subnet's service endpoint setting exists but storage traffic is still rejected. Instead, resolve the SQL server hostname to the endpoint IP from the application VNet.
D:Query a permitted and a disallowed storage resource from the subnet. This concerns resource-level governance over which azure storage accounts a VNet may access. Instead, resolve the SQL server hostname to the endpoint IP from the application VNet.
Question 688
A hosted SQL database needs to be reachable privately from an application VNet. During acceptance testing, sQL traffic resolves to the public gateway. Which underlying configuration problem best explains the symptom?
- Private link DNS zone or link does not provide the private answer
- Service endpoints do not allocate private endpoint IPs
- Storage firewall VNet rule or service endpoint configuration is missing
- The endpoint policy scope or association is incorrect
Explanation
Correct Answer
A:Private link DNS zone or link does not provide the private answer explains the observed failure: sQL traffic resolves to the public gateway. Correct the design by using use an Azure SQL Database Private Endpoint with correct subresource, implemented through create private endpoint connection to the SQL server and approve it.
Incorrect Answers
B:Service endpoints do not allocate private endpoint IPs. This concerns a developer thinks azure service endpoints give a storage account a private address inside the VNet. Here, private link DNS zone or link does not provide the private answer.
C:Storage firewall VNet rule or service endpoint configuration is missing. This concerns a higher-trust path to azure storage while retaining the service's public endpoint. Here, private link DNS zone or link does not provide the private answer.
D:The endpoint policy scope or association is incorrect. This concerns resource-level governance over which azure storage accounts a VNet may access. Here, private link DNS zone or link does not provide the private answer.
Question 689
A key management service must only be accessed through the company's private networks. Which Azure networking design most directly satisfies this requirement?
- Use Storage service endpoint policies with scoped resource definitions
- Use the proper Private DNS zone group integration
- Create an Azure Key Vault Private Endpoint and restrict public network access
- Explain that service endpoints retain public service FQDNs and IPs
Explanation
Correct Answer
C:Create an Azure Key Vault Private Endpoint and restrict public network access addresses the topology, access or delivery requirement in the scenario. Apply it by add the vault private endpoint and appropriate private DNS zone group; confirm by test vault access from authorized VNet and confirm blocked public access.
Incorrect Answers
A:Use Storage service endpoint policies with scoped resource definitions. This concerns resource-level governance over which Azure Storage accounts a VNet may access. Instead, create an Azure Key Vault Private Endpoint and restrict public network access.
B:Use the proper Private DNS zone group integration. This concerns a private endpoint NIC appears healthy but its DNS records were never populated. Instead, create an Azure Key Vault Private Endpoint and restrict public network access.
D:Explain that service endpoints retain public service FQDNs and IPs. This concerns a developer thinks Azure service endpoints give a storage account a private address inside the VNet. Instead, create an Azure Key Vault Private Endpoint and restrict public network access.
Question 690
A key management service must only be accessed through the company's private networks. The architecture uses this design: Create an Azure Key Vault Private Endpoint and restrict public network access. Which configuration should the engineer apply to implement it?
- Enable service endpoint and add the specific subnet to allowed network rules
- Inspect service endpoint and policy association properties for both subnets
- Recreate or correctly configure the endpoint with target resource ID and subresource
- Add the vault private endpoint and appropriate private DNS zone group
Explanation
Correct Answer
D:Add the vault private endpoint and appropriate private DNS zone group is the operational configuration for create an azure key vault private endpoint and restrict public network access. The acceptance test is to test vault access from authorized VNet and confirm blocked public access.
Incorrect Answers
A:Enable service endpoint and add the specific subnet to allowed network rules is a concrete step for use service endpoint-based virtual network access rules on the storage account. Here the selected design is create an azure key vault private endpoint and restrict public network access, which instead requires add the vault private endpoint and appropriate private dns zone group.
B:Inspect service endpoint and policy association properties for both subnets is a concrete step for apply the policy to the exact production subnet and verify service endpoint enabled. Here the selected design is create an azure key vault private endpoint and restrict public network access, which instead requires add the vault private endpoint and appropriate private dns zone group.
C:Recreate or correctly configure the endpoint with target resource ID and subresource is a concrete step for correct the private endpoint target resource before using it. Here the selected design is create an azure key vault private endpoint and restrict public network access, which instead requires add the vault private endpoint and appropriate private dns zone group.
Designing and Implementing Microsoft Azure Networking Solutions (AZ-700) Practice Tests