100% Latest & Updated Microsoft AZ-700 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!
Question 700
An on-premises workstation must access an Azure private endpoint over ExpressRoute. During acceptance testing, on-premises FQDN resolves but connections time out. Which underlying configuration problem best explains the symptom?
- Virtual network rule or service endpoint is not configured
- Only development's subnet has the service endpoint policy attached
- Hybrid routing or NSG to the endpoint private IP is missing
- No effective service endpoint policy restricts target accounts
Explanation
Correct Answer
C:Hybrid routing or NSG to the endpoint private IP is missing explains the observed failure: on-premises FQDN resolves but connections time out. Correct the design by using provide hybrid routing plus conditional DNS forwarding to the private endpoint address, implemented through advertise reachable endpoint subnet paths and forward DNS to an Azure resolver.
Incorrect Answers
A:Virtual network rule or service endpoint is not configured. This concerns azure SQL service endpoint support for a supported SQL deployment. Here, hybrid routing or NSG to the endpoint private IP is missing.
B:Only development's subnet has the service endpoint policy attached. This concerns a service endpoint policy works in development but not in the production subnet. Here, hybrid routing or NSG to the endpoint private IP is missing.
D:No effective service endpoint policy restricts target accounts. This concerns limit which storage accounts a subnet can reach over service endpoints. Here, hybrid routing or NSG to the endpoint private IP is missing.
Question 701
A storage Private Endpoint has been created but remains Pending approval. Which TWO listed choices identify the suitable Azure design and the concrete configuration required to implement it? (Choose TWO.)
- Set the correct subnet service endpoint and permit it on the SQL server
- Attach Private Link Service to the supported internal Standard Load Balancer frontend
- Explain that service endpoints retain public service FQDNs and IPs
- Review the target resource's private endpoint connections and approve the request
- Approve the private endpoint connection at the service side
Explanation
Correct Answers
D:Review the target resource's private endpoint connections and approve the request is the operational configuration for approve the private endpoint connection at the service side. The acceptance test is to inspect connection status and perform an authorized storage request.
E:Approve the private endpoint connection at the service side addresses the topology, access or delivery requirement in the scenario. Apply it by review the target resource's private endpoint connections and approve the request; confirm by inspect connection status and perform an authorized storage request.
Incorrect Answers
A:Set the correct subnet service endpoint and permit it on the SQL server is a concrete step for enable a microsoft.sql service endpoint and matching sql firewall vnet rule. Here the selected design is approve the private endpoint connection at the service side, which instead requires review the target resource's private endpoint connections and approve the request.
B:Attach Private Link Service to the supported internal Standard Load Balancer frontend. This concerns publishing a service to multiple consumers through one approved frontend. Instead, review the target resource's private endpoint connections and approve the request.
C:Explain that service endpoints retain public service FQDNs and IPs. This concerns a developer thinks Azure service endpoints give a storage account a private address inside the VNet. Instead, review the target resource's private endpoint connections and approve the request.
Question 702
A storage Private Endpoint has been created but remains Pending approval. The architecture uses this design: Approve the private endpoint connection at the service side. Which configuration should the engineer apply to implement it?
- Set the correct subnet service endpoint and permit it on the SQL server
- Review the target resource's private endpoint connections and approve the request
- Configure the service's approval workflow and authorize named connections
- Inspect service endpoint and policy association properties for both subnets
Explanation
Correct Answer
B:Review the target resource's private endpoint connections and approve the request is the operational configuration for approve the private endpoint connection at the service side. The acceptance test is to inspect connection status and perform an authorized storage request.
Incorrect Answers
A:Set the correct subnet service endpoint and permit it on the SQL server is a concrete step for enable a microsoft.sql service endpoint and matching sql firewall vnet rule. Here the selected design is approve the private endpoint connection at the service side, which instead requires review the target resource's private endpoint connections and approve the request.
C:Configure the service's approval workflow and authorize named connections is a concrete step for require manual private endpoint approval and check connection state. Here the selected design is approve the private endpoint connection at the service side, which instead requires review the target resource's private endpoint connections and approve the request.
D:Inspect service endpoint and policy association properties for both subnets is a concrete step for apply the policy to the exact production subnet and verify service endpoint enabled. Here the selected design is approve the private endpoint connection at the service side, which instead requires review the target resource's private endpoint connections and approve the request.
Question 703
A storage Private Endpoint has been created but remains Pending approval. After the team applies this change—review the target resource's private endpoint connections and approve the request—which validation best proves the intended result?
- Inspect connection status and perform an authorized storage request
- Compare effective connectivity to allowed and blocked storage accounts
- Try an external public request and a private endpoint request
- Query a permitted and a disallowed storage resource from the subnet
Explanation
Correct Answer
A:Inspect connection status and perform an authorized storage request directly checks whether the intended outcome occurs, not merely whether a resource exists. If the check fails, investigate whether the private link connection request is still Pending.
Incorrect Answers
B:Compare effective connectivity to allowed and blocked storage accounts. This concerns a service endpoint policy works in development but not in the production subnet. Instead, inspect connection status and perform an authorized storage request.
C:Try an external public request and a private endpoint request. This concerns preventing general public data-plane access after private endpoint deployment. Instead, inspect connection status and perform an authorized storage request.
D:Query a permitted and a disallowed storage resource from the subnet. This concerns resource-level governance over which azure storage accounts a VNet may access. Instead, inspect connection status and perform an authorized storage request.
Question 704
A storage Private Endpoint has been created but remains Pending approval. During acceptance testing, endpoint stays inaccessible despite NIC provisioning. Which underlying configuration problem best explains the symptom?
- No effective service endpoint policy restricts target accounts
- Only development's subnet has the service endpoint policy attached
- Service endpoints do not provide an on-premises private IP endpoint
- The private link connection request is still Pending
Explanation
Correct Answer
D:The private link connection request is still Pending explains the observed failure: endpoint stays inaccessible despite NIC provisioning. Correct the design by using approve the private endpoint connection at the service side, implemented through review the target resource's private endpoint connections and approve the request.
Incorrect Answers
A:No effective service endpoint policy restricts target accounts. This concerns limit which storage accounts a subnet can reach over service endpoints. Here, the private link connection request is still Pending.
B:Only development's subnet has the service endpoint policy attached. This concerns a service endpoint policy works in development but not in the production subnet. Here, the private link connection request is still Pending.
C:Service endpoints do not provide an on-premises private IP endpoint. This concerns a design compares private endpoints and service endpoints for inbound access from a branch network. Here, the private link connection request is still Pending.
Question 705
A vendor provides a custom Azure service behind its own internal Standard Load Balancer. Which Azure networking design most directly satisfies this requirement?
- Use Storage service endpoint policies with scoped resource definitions
- Enable a Microsoft.Sql service endpoint and matching SQL firewall VNet rule
- Use Azure Policy and supported subnet network security controls for the endpoints
- Publish the service through Azure Private Link Service
Explanation
Correct Answer
D:Publish the service through Azure Private Link Service addresses the topology, access or delivery requirement in the scenario. Apply it by create a Private Link Service bound to a supported Standard Load Balancer frontend; confirm by have a consumer create a private endpoint and reach the service privately.
Incorrect Answers
A:Use Storage service endpoint policies with scoped resource definitions. This concerns resource-level governance over which Azure Storage accounts a VNet may access. Instead, publish the service through Azure Private Link Service.
B:Enable a Microsoft.Sql service endpoint and matching SQL firewall VNet rule. This concerns Azure SQL service endpoint support for a supported SQL deployment. Instead, publish the service through Azure Private Link Service.
C:Use Azure Policy and supported subnet network security controls for the endpoints. This concerns restricting creation of private endpoints to designated subnet boundaries. Instead, publish the service through Azure Private Link Service.
Question 706
A vendor provides a custom Azure service behind its own internal Standard Load Balancer. The architecture uses this design: Publish the service through Azure Private Link Service. Which configuration should the engineer apply to implement it?
- Add the vault private endpoint and appropriate private DNS zone group
- Set the correct subnet service endpoint and permit it on the SQL server
- Create a service endpoint policy listing approved storage resource scopes and associate it with the subnet
- Create a Private Link Service bound to a supported Standard Load Balancer frontend
Explanation
Correct Answer
D:Create a Private Link Service bound to a supported Standard Load Balancer frontend is the operational configuration for publish the service through azure private link service. The acceptance test is to have a consumer create a private endpoint and reach the service privately.
Incorrect Answers
A:Add the vault private endpoint and appropriate private DNS zone group is a concrete step for create an azure key vault private endpoint and restrict public network access. Here the selected design is publish the service through azure private link service, which instead requires create a private link service bound to a supported standard load balancer frontend.
B:Set the correct subnet service endpoint and permit it on the SQL server is a concrete step for enable a microsoft.sql service endpoint and matching sql firewall vnet rule. Here the selected design is publish the service through azure private link service, which instead requires create a private link service bound to a supported standard load balancer frontend.
C:Create a service endpoint policy listing approved storage resource scopes and associate it with the subnet is a concrete step for apply an azure storage service endpoint policy to the subnet. Here the selected design is publish the service through azure private link service, which instead requires create a private link service bound to a supported standard load balancer frontend.
Question 707
A vendor provides a custom Azure service behind its own internal Standard Load Balancer. After the team applies this change—create a Private Link Service bound to a supported Standard Load Balancer frontend—which validation best proves the intended result?
- Resolve the storage FQDN to a private IP and perform a storage operation
- Check subnet service endpoints and authorize a storage request from that subnet
- Resolve the service FQDN privately from the branch and establish a connection
- Have a consumer create a private endpoint and reach the service privately
Explanation
Correct Answer
D:Have a consumer create a private endpoint and reach the service privately directly checks whether the intended outcome occurs, not merely whether a resource exists. If the check fails, investigate whether private Link Service is not properly associated with the load balancer frontend.
Incorrect Answers
A:Resolve the storage FQDN to a private IP and perform a storage operation. This concerns reaching its azure storage account without using a public service endpoint. Here, have a consumer create a private endpoint and reach the service privately.
B:Check subnet service endpoints and authorize a storage request from that subnet. This concerns a higher-trust path to azure storage while retaining the service's public endpoint. Here, have a consumer create a private endpoint and reach the service privately.
C:Resolve the service FQDN privately from the branch and establish a connection. This concerns a design compares private endpoints and service endpoints for inbound access from a branch network. Here, have a consumer create a private endpoint and reach the service privately.
Question 708
A vendor provides a custom Azure service behind its own internal Standard Load Balancer. During acceptance testing, customer endpoints cannot be created against the vendor service. Which underlying configuration problem best explains the symptom?
- Virtual network rule or service endpoint is not configured
- Private Link Service is not properly associated with the load balancer frontend
- No effective service endpoint policy restricts target accounts
- Only development's subnet has the service endpoint policy attached
Explanation
Correct Answer
B:Private Link Service is not properly associated with the load balancer frontend explains the observed failure: customer endpoints cannot be created against the vendor service. Correct the design by using publish the service through Azure Private Link Service, implemented through create a Private Link Service bound to a supported Standard Load Balancer frontend.
Incorrect Answers
A:Virtual network rule or service endpoint is not configured. This concerns azure SQL service endpoint support for a supported SQL deployment. Here, private Link Service is not properly associated with the load balancer frontend.
C:No effective service endpoint policy restricts target accounts. This concerns limit which storage accounts a subnet can reach over service endpoints. Here, private Link Service is not properly associated with the load balancer frontend.
D:Only development's subnet has the service endpoint policy attached. This concerns a service endpoint policy works in development but not in the production subnet. Here, private Link Service is not properly associated with the load balancer frontend.
Question 709
A consumer in another tenant must access a partner's privately published service. Which Azure networking design most directly satisfies this requirement?
- Use a Private Endpoint to the partner's Private Link Service with approval
- Use service endpoint-based virtual network access rules on the storage account
- Create distinct private endpoints for required storage subresources
- Explain that service endpoints retain public service FQDNs and IPs
Explanation
Correct Answer
A:Use a Private Endpoint to the partner's Private Link Service with approval addresses the topology, access or delivery requirement in the scenario. Apply it by configure the private endpoint using the partner resource alias and consent workflow; confirm by validate approval and connect to the service private IP.
Incorrect Answers
B:Use service endpoint-based virtual network access rules on the storage account. This concerns allowing only clients from a designated application subnet. Instead, use a Private Endpoint to the partner's Private Link Service with approval.
C:Create distinct private endpoints for required storage subresources. This is relevant when a storage account exposes blob and file services, but only blob has a private endpoint. Instead, use a Private Endpoint to the partner's Private Link Service with approval.
D:Explain that service endpoints retain public service FQDNs and IPs. This concerns a developer thinks Azure service endpoints give a storage account a private address inside the VNet. Instead, use a Private Endpoint to the partner's Private Link Service with approval.
Question 710
A consumer in another tenant must access a partner's privately published service. The architecture uses this design: Use a Private Endpoint to the partner's Private Link Service with approval. Which configuration should the engineer apply to implement it?
- Set the correct subnet service endpoint and permit it on the SQL server
- Enable the Storage service endpoint on the subnet and allow the subnet in storage firewall rules
- Configure the private endpoint using the partner resource alias and consent workflow
- Configure provider-side frontend and NAT IP configuration for the service
Explanation
Correct Answer
C:Configure the private endpoint using the partner resource alias and consent workflow is the operational configuration for use a private endpoint to the partner's private link service with approval. The acceptance test is to validate approval and connect to the service private IP.
Incorrect Answers
A:Set the correct subnet service endpoint and permit it on the SQL server is a concrete step for enable a microsoft.sql service endpoint and matching sql firewall vnet rule. Here the selected design is use a private endpoint to the partner's private link service with approval, which instead requires configure the private endpoint using the partner resource alias and consent workflow.
B:Enable the Storage service endpoint on the subnet and allow the subnet in storage firewall rules is a concrete step for enable a microsoft.storage virtual network service endpoint. Here the selected design is use a private endpoint to the partner's private link service with approval, which instead requires configure the private endpoint using the partner resource alias and consent workflow.
D:Configure provider-side frontend and NAT IP configuration for the service is a concrete step for attach private link service to the supported internal standard load balancer frontend. Here the selected design is use a private endpoint to the partner's private link service with approval, which instead requires configure the private endpoint using the partner resource alias and consent workflow.
Designing and Implementing Microsoft Azure Networking Solutions (AZ-700) Practice Tests