100% Latest & Updated Microsoft AZ-700 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!
Question 710
A consumer in another tenant must access a partner's privately published service. The architecture uses this design: Use a Private Endpoint to the partner's Private Link Service with approval. Which configuration should the engineer apply to implement it?
- Set the correct subnet service endpoint and permit it on the SQL server
- Enable the Storage service endpoint on the subnet and allow the subnet in storage firewall rules
- Configure the private endpoint using the partner resource alias and consent workflow
- Configure provider-side frontend and NAT IP configuration for the service
Explanation
Correct Answer
C:Configure the private endpoint using the partner resource alias and consent workflow is the operational configuration for use a private endpoint to the partner's private link service with approval. The acceptance test is to validate approval and connect to the service private IP.
Incorrect Answers
A:Set the correct subnet service endpoint and permit it on the SQL server is a concrete step for enable a microsoft.sql service endpoint and matching sql firewall vnet rule. Here the selected design is use a private endpoint to the partner's private link service with approval, which instead requires configure the private endpoint using the partner resource alias and consent workflow.
B:Enable the Storage service endpoint on the subnet and allow the subnet in storage firewall rules is a concrete step for enable a microsoft.storage virtual network service endpoint. Here the selected design is use a private endpoint to the partner's private link service with approval, which instead requires configure the private endpoint using the partner resource alias and consent workflow.
D:Configure provider-side frontend and NAT IP configuration for the service is a concrete step for attach private link service to the supported internal standard load balancer frontend. Here the selected design is use a private endpoint to the partner's private link service with approval, which instead requires configure the private endpoint using the partner resource alias and consent workflow.
Question 711
A consumer in another tenant must access a partner's privately published service. After the team applies this change—configure the private endpoint using the partner resource alias and consent workflow—which validation best proves the intended result?
- Inspect endpoint NIC address and confirm the service retains managed PaaS identity
- Check subnet service endpoints and authorize a storage request from that subnet
- Resolve the service FQDN privately from the branch and establish a connection
- Validate approval and connect to the service private IP
Explanation
Correct Answer
D:Validate approval and connect to the service private IP directly checks whether the intended outcome occurs, not merely whether a resource exists. If the check fails, investigate whether the partner did not approve the endpoint connection.
Incorrect Answers
A:Inspect endpoint NIC address and confirm the service retains managed PaaS identity. This concerns a database team wonders whether private endpoint gives the database a private ip inside the application subnet. Here, validate approval and connect to the service private IP.
B:Check subnet service endpoints and authorize a storage request from that subnet. This concerns a higher-trust path to azure storage while retaining the service's public endpoint. Here, validate approval and connect to the service private IP.
C:Resolve the service FQDN privately from the branch and establish a connection. This concerns a design compares private endpoints and service endpoints for inbound access from a branch network. Here, validate approval and connect to the service private IP.
Question 712
A consumer in another tenant must access a partner's privately published service. During acceptance testing, cross-tenant private endpoint remains Pending. Which underlying configuration problem best explains the symptom?
- Storage firewall VNet rule or service endpoint configuration is missing
- A service endpoint was chosen for a requirement that needs Private Link
- Only development's subnet has the service endpoint policy attached
- The partner did not approve the endpoint connection
Explanation
Correct Answer
D:The partner did not approve the endpoint connection explains the observed failure: cross-tenant private endpoint remains Pending. Correct the design by using use a Private Endpoint to the partner's Private Link Service with approval, implemented through configure the private endpoint using the partner resource alias and consent workflow.
Incorrect Answers
A:Storage firewall VNet rule or service endpoint configuration is missing. This concerns a higher-trust path to azure storage while retaining the service's public endpoint. Here, the partner did not approve the endpoint connection.
B:A service endpoint was chosen for a requirement that needs Private Link. This concerns all paas connections to remain on exclusively private addresses. Here, the partner did not approve the endpoint connection.
C:Only development's subnet has the service endpoint policy attached. This concerns a service endpoint policy works in development but not in the production subnet. Here, the partner did not approve the endpoint connection.
Question 713
A Private Link Service provider must identify different consumer connections. Which Azure networking design most directly satisfies this requirement?
- Explain that service endpoints retain public service FQDNs and IPs
- Create distinct private endpoints for required storage subresources
- Enable a Microsoft.Storage virtual network service endpoint
- Use supported Private Link Service visibility and approval controls
Explanation
Correct Answer
D:Use supported Private Link Service visibility and approval controls addresses the topology, access or delivery requirement in the scenario. Apply it by configure allowed subscriptions and review private endpoint connection requests; confirm by verify only approved consumers can establish private connections.
Incorrect Answers
A:Explain that service endpoints retain public service FQDNs and IPs. This concerns a developer thinks Azure service endpoints give a storage account a private address inside the VNet. Instead, use supported Private Link Service visibility and approval controls.
B:Create distinct private endpoints for required storage subresources. This is relevant when a storage account exposes blob and file services, but only blob has a private endpoint. Instead, use supported Private Link Service visibility and approval controls.
C:Enable a Microsoft.Storage virtual network service endpoint. This concerns a higher-trust path to Azure Storage while retaining the service's public endpoint. Instead, use supported Private Link Service visibility and approval controls.
Question 714
A Private Link Service provider must identify different consumer connections. The architecture uses this design: Use supported Private Link Service visibility and approval controls. Which configuration should the engineer apply to implement it?
- Set the correct subnet service endpoint and permit it on the SQL server
- Configure allowed subscriptions and review private endpoint connection requests
- Enable the Storage service endpoint on the subnet and allow the subnet in storage firewall rules
- Create the missing private zone link for the second spoke
Explanation
Correct Answer
B:Configure allowed subscriptions and review private endpoint connection requests is the operational configuration for use supported private link service visibility and approval controls. The acceptance test is to verify only approved consumers can establish private connections.
Incorrect Answers
A:Set the correct subnet service endpoint and permit it on the SQL server is a concrete step for enable a microsoft.sql service endpoint and matching sql firewall vnet rule. Here the selected design is use supported private link service visibility and approval controls, which instead requires configure allowed subscriptions and review private endpoint connection requests.
C:Enable the Storage service endpoint on the subnet and allow the subnet in storage firewall rules is a concrete step for enable a microsoft.storage virtual network service endpoint. Here the selected design is use supported private link service visibility and approval controls, which instead requires configure allowed subscriptions and review private endpoint connection requests.
D:Create the missing private zone link for the second spoke is a concrete step for share its private dns zone with both spokes using vnet links. Here the selected design is use supported private link service visibility and approval controls, which instead requires configure allowed subscriptions and review private endpoint connection requests.
Question 715
A Private Link Service provider must identify different consumer connections. After the team applies this change—configure allowed subscriptions and review private endpoint connection requests—which validation best proves the intended result?
- Resolve service FQDN to private IP and confirm private route
- Resolve the storage FQDN to a private IP and perform a storage operation
- Retry storage operations from the approved subnet
- Verify only approved consumers can establish private connections
Explanation
Correct Answer
D:Verify only approved consumers can establish private connections directly checks whether the intended outcome occurs, not merely whether a resource exists. If the check fails, investigate whether private Link Service visibility or approval policy is too permissive.
Incorrect Answers
A:Resolve service FQDN to private IP and confirm private route. This concerns all paas connections to remain on exclusively private addresses. Instead, verify only approved consumers can establish private connections.
B:Resolve the storage FQDN to a private IP and perform a storage operation. This concerns reaching its azure storage account without using a public service endpoint. Instead, verify only approved consumers can establish private connections.
C:Retry storage operations from the approved subnet. This is relevant when a subnet's service endpoint setting exists but storage traffic is still rejected. Instead, verify only approved consumers can establish private connections.
Question 716
A Private Link Service provider must identify different consumer connections. During acceptance testing, an unauthorized subscription successfully connects. Which underlying configuration problem best explains the symptom?
- The endpoint policy scope or association is incorrect
- Storage firewall VNet rule or service endpoint configuration is missing
- Private Link Service visibility or approval policy is too permissive
- Virtual network rule or service endpoint is not configured
Explanation
Correct Answer
C:Private Link Service visibility or approval policy is too permissive explains the observed failure: an unauthorized subscription successfully connects. Correct the design by using use supported Private Link Service visibility and approval controls, implemented through configure allowed subscriptions and review private endpoint connection requests.
Incorrect Answers
A:The endpoint policy scope or association is incorrect. This concerns resource-level governance over which azure storage accounts a VNet may access. Here, private Link Service visibility or approval policy is too permissive.
B:Storage firewall VNet rule or service endpoint configuration is missing. This concerns a higher-trust path to azure storage while retaining the service's public endpoint. Here, private Link Service visibility or approval policy is too permissive.
D:Virtual network rule or service endpoint is not configured. This concerns azure SQL service endpoint support for a supported SQL deployment. Here, private Link Service visibility or approval policy is too permissive.
Question 717
A storage account exposes blob and file services, but only blob has a private endpoint. Which THREE choices together identify the appropriate design, its implementation, and a direct verification test? (Choose THREE.)
- Create distinct private endpoints for required storage subresources
- Resolve both blob and file service FQDNs to private addresses
- Deploy private endpoints targeting both blob and file subresource groups
- Inspect service endpoint and policy association properties for both subnets
- Enable a Microsoft.Storage virtual network service endpoint
- Check subnet service endpoints and authorize a storage request from that subnet
Explanation
Correct Answers
A:Create distinct private endpoints for required storage subresources addresses the topology, access or delivery requirement in the scenario. Apply it by deploy private endpoints targeting both blob and file subresource groups; confirm by resolve both blob and file service FQDNs to private addresses.
B:Resolve both blob and file service FQDNs to private addresses directly checks whether the intended outcome occurs, not merely whether a resource exists. If the check fails, investigate whether no file subresource private endpoint and matching DNS zone exist.
C:Deploy private endpoints targeting both blob and file subresource groups is the operational configuration for create distinct private endpoints for required storage subresources. The acceptance test is to resolve both blob and file service FQDNs to private addresses.
Incorrect Answers
D:Inspect service endpoint and policy association properties for both subnets is a concrete step for apply the policy to the exact production subnet and verify service endpoint enabled. Here the selected design is create distinct private endpoints for required storage subresources, which instead requires deploy private endpoints targeting both blob and file subresource groups.
E:Enable a Microsoft.Storage virtual network service endpoint. This concerns a higher-trust path to Azure Storage while retaining the service's public endpoint. Instead, create distinct private endpoints for required storage subresources.
F:Check subnet service endpoints and authorize a storage request from that subnet. This concerns a higher-trust path to azure storage while retaining the service's public endpoint. Instead, create distinct private endpoints for required storage subresources.
Question 718
A storage account exposes blob and file services, but only blob has a private endpoint. The architecture uses this design: Create distinct private endpoints for required storage subresources. Which configuration should the engineer apply to implement it?
- Inspect service endpoint and policy association properties for both subnets
- Create the private endpoint and DNS integration, then restrict public access
- Deploy private endpoints targeting both blob and file subresource groups
- Create the private endpoint IP configuration in the designated subnet
Explanation
Correct Answer
C:Deploy private endpoints targeting both blob and file subresource groups is the operational configuration for create distinct private endpoints for required storage subresources. The acceptance test is to resolve both blob and file service FQDNs to private addresses.
Incorrect Answers
A:Inspect service endpoint and policy association properties for both subnets is a concrete step for apply the policy to the exact production subnet and verify service endpoint enabled. Here the selected design is create distinct private endpoints for required storage subresources, which instead requires deploy private endpoints targeting both blob and file subresource groups.
B:Create the private endpoint and DNS integration, then restrict public access is a concrete step for choose private endpoint rather than service endpoint for private ip requirements. Here the selected design is create distinct private endpoints for required storage subresources, which instead requires deploy private endpoints targeting both blob and file subresource groups.
D:Create the private endpoint IP configuration in the designated subnet is a concrete step for use the endpoint nic private address while leaving the managed service externally hosted. Here the selected design is create distinct private endpoints for required storage subresources, which instead requires deploy private endpoints targeting both blob and file subresource groups.
Question 719
A storage account exposes blob and file services, but only blob has a private endpoint. After the team applies this change—deploy private endpoints targeting both blob and file subresource groups—which validation best proves the intended result?
- Resolve both blob and file service FQDNs to private addresses
- Check subnet service endpoints and authorize a storage request from that subnet
- Try an external public request and a private endpoint request
- Resolve the service FQDN privately from the branch and establish a connection
Explanation
Correct Answer
A:Resolve both blob and file service FQDNs to private addresses directly checks whether the intended outcome occurs, not merely whether a resource exists. If the check fails, investigate whether no file subresource private endpoint and matching DNS zone exist.
Incorrect Answers
B:Check subnet service endpoints and authorize a storage request from that subnet. This concerns a higher-trust path to azure storage while retaining the service's public endpoint. Instead, resolve both blob and file service FQDNs to private addresses.
C:Try an external public request and a private endpoint request. This concerns preventing general public data-plane access after private endpoint deployment. Instead, resolve both blob and file service FQDNs to private addresses.
D:Resolve the service FQDN privately from the branch and establish a connection. This concerns a design compares private endpoints and service endpoints for inbound access from a branch network. Instead, resolve both blob and file service FQDNs to private addresses.
Question 720
A storage account exposes blob and file services, but only blob has a private endpoint. During acceptance testing, file shares still resolve to the public service endpoint. Which underlying configuration problem best explains the symptom?
- Only development's subnet has the service endpoint policy attached
- No file subresource private endpoint and matching DNS zone exist
- No effective service endpoint policy restricts target accounts
- Virtual network rule or service endpoint is not configured
Explanation
Correct Answer
B:No file subresource private endpoint and matching DNS zone exist explains the observed failure: file shares still resolve to the public service endpoint. Correct the design by using create distinct private endpoints for required storage subresources, implemented through deploy private endpoints targeting both blob and file subresource groups.
Incorrect Answers
A:Only development's subnet has the service endpoint policy attached. This concerns a service endpoint policy works in development but not in the production subnet. Here, no file subresource private endpoint and matching DNS zone exist.
C:No effective service endpoint policy restricts target accounts. This concerns limit which storage accounts a subnet can reach over service endpoints. Here, no file subresource private endpoint and matching DNS zone exist.
D:Virtual network rule or service endpoint is not configured. This concerns azure SQL service endpoint support for a supported SQL deployment. Here, no file subresource private endpoint and matching DNS zone exist.
Designing and Implementing Microsoft Azure Networking Solutions (AZ-700) Practice Tests