Microsoft AZ-700 Exam Dumps, Practice Test Questions

100% Latest & Updated Microsoft AZ-700 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!

Microsoft AZ-700 Premium Bundle
$79.97
$59.98

AZ-700 Premium Bundle

  • Premium File: 406 Questions & Answers. Last update: Nov 12, 2026
  • Training Course: 64 Video Lectures
  • Study Guide: 762 Pages
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates

AZ-700 Premium Bundle

Microsoft AZ-700 Premium Bundle
  • Premium File: 406 Questions & Answers. Last update: Nov 12, 2026
  • Training Course: 64 Video Lectures
  • Study Guide: 762 Pages
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates
$79.97
$59.98

Microsoft AZ-700 Practice Test 88

Question 870

A branch route works but firewall-style network enforcement should occur inside an Azure VNet. The architecture uses this design: Apply NSG controls at the appropriate subnet or NIC boundary. Which configuration should the engineer apply to implement it?

  1. Associate each VM NIC with an ASG and reference ASGs in NSG rules
  2. Associate NSG to resource subnet and define explicit allowed traffic profiles
  3. Configure diagnostic categories and resource-specific tables as applicable
  4. Associate the policy with the intended domain/path patterns

Explanation

Correct Answer

B:

Associate NSG to resource subnet and define explicit allowed traffic profiles is the operational configuration for apply nsg controls at the appropriate subnet or nic boundary. The acceptance test is to test desired east-west flows and blocked unauthorized connections.

Incorrect Answers

A:

Associate each VM NIC with an ASG and reference ASGs in NSG rules is a concrete step for use azure application security groups for logical vm grouping. Here the selected design is apply nsg controls at the appropriate subnet or nic boundary, which instead requires associate nsg to resource subnet and define explicit allowed traffic profiles.

C:

Configure diagnostic categories and resource-specific tables as applicable is a concrete step for send azure firewall diagnostics to an approved log analytics workspace. Here the selected design is apply nsg controls at the appropriate subnet or nic boundary, which instead requires associate nsg to resource subnet and define explicit allowed traffic profiles.

D:

Associate the policy with the intended domain/path patterns is a concrete step for scope the waf security policy to designated front door domains. Here the selected design is apply nsg controls at the appropriate subnet or nic boundary, which instead requires associate nsg to resource subnet and define explicit allowed traffic profiles.

Question 871

A branch route works but firewall-style network enforcement should occur inside an Azure VNet. After the team applies this change—associate NSG to resource subnet and define explicit allowed traffic profiles—which validation best proves the intended result?

  1. Test desired east-west flows and blocked unauthorized connections
  2. Test one approved update target and one disallowed destination
  3. Inspect edge WAF logs for a safe and blocked request
  4. Test representative POST payloads and malicious input

Explanation

Correct Answer

A:

Test desired east-west flows and blocked unauthorized connections directly checks whether the intended outcome occurs, not merely whether a resource exists. If the check fails, investigate whether no NSG is associated with the relevant boundary.

Incorrect Answers

B:

Test one approved update target and one disallowed destination. This concerns not connect to arbitrary destinations. Instead, test desired east-west flows and blocked unauthorized connections.

C:

Inspect edge WAF logs for a safe and blocked request. This concerns waf filtering at microsoft's edge network before reaching regional origins. Instead, test desired east-west flows and blocked unauthorized connections.

D:

Test representative POST payloads and malicious input. This is relevant when a regional waf blocks legitimate post requests because request body parsing is too strict. Instead, test desired east-west flows and blocked unauthorized connections.

Question 872

A branch route works but firewall-style network enforcement should occur inside an Azure VNet. During acceptance testing, vMs communicate across network segments without expected filtering. Which underlying configuration problem best explains the symptom?

  1. WAF events were not correlated with backend health data
  2. No NSG is associated with the relevant boundary
  3. Relevant Firewall diagnostic categories were not enabled
  4. The WAF policy attachment or rule scope is incorrect

Explanation

Correct Answer

B:

No NSG is associated with the relevant boundary explains the observed failure: vMs communicate across network segments without expected filtering. Correct the design by using apply NSG controls at the appropriate subnet or NIC boundary, implemented through associate NSG to resource subnet and define explicit allowed traffic profiles.

Incorrect Answers

A:

WAF events were not correlated with backend health data. This concerns distinguishing a waf block from an application gateway backend 502. Here, no NSG is associated with the relevant boundary.

C:

Relevant Firewall diagnostic categories were not enabled. This concerns comparing logs from application, network and dnat firewall rules in one place. Here, no NSG is associated with the relevant boundary.

D:

The WAF policy attachment or rule scope is incorrect. This is relevant when an application gateway uses waf policy but test requests never trigger expected custom rules. Here, no NSG is associated with the relevant boundary.

Question 873

A hub-and-spoke network needs central stateful egress inspection across several spoke VNets. Which Azure networking design most directly satisfies this requirement?

  1. Set rule collection group and collection priorities in the correct evaluation order
  2. Deploy Azure Firewall in the hub and route spokes through it
  3. Associate an Azure Application Gateway WAF policy with a supported gateway SKU
  4. Enable diagnostic export for Azure Front Door WAF

Explanation

Correct Answer

B:

Deploy Azure Firewall in the hub and route spokes through it addresses the topology, access or delivery requirement in the scenario. Apply it by create AzureFirewallSubnet, deploy Firewall and configure a default UDR next hop; confirm by verify spokes' effective routes and inspect firewall logs for outbound flows.

Incorrect Answers

A:

Set rule collection group and collection priorities in the correct evaluation order. This concerns denying one destination even though a broader allow exists. Instead, deploy Azure Firewall in the hub and route spokes through it.

C:

Associate an Azure Application Gateway WAF policy with a supported gateway SKU. This concerns protection against OWASP web exploits. Instead, deploy Azure Firewall in the hub and route spokes through it.

D:

Enable diagnostic export for Azure Front Door WAF. This concerns wAF logs centralized for incident review. Instead, deploy Azure Firewall in the hub and route spokes through it.

Question 874

A hub-and-spoke network needs central stateful egress inspection across several spoke VNets. The architecture uses this design: Deploy Azure Firewall in the hub and route spokes through it. Which configuration should the engineer apply to implement it?

  1. Associate the NSG to the finance subnet and configure a restrictive inbound rule
  2. Create AzureFirewallSubnet, deploy Firewall and configure a default UDR next hop
  3. Deploy Application Gateway WAF_v2 and attach a managed-rule WAF policy
  4. Configure inspection CA/trust and premium TLS inspection policy where supported

Explanation

Correct Answer

B:

Create AzureFirewallSubnet, deploy Firewall and configure a default UDR next hop is the operational configuration for deploy azure firewall in the hub and route spokes through it. The acceptance test is to verify spokes' effective routes and inspect firewall logs for outbound flows.

Incorrect Answers

A:

Associate the NSG to the finance subnet and configure a restrictive inbound rule is a concrete step for create explicit nsg inbound rules with narrow source prefixes and priorities. Here the selected design is deploy azure firewall in the hub and route spokes through it, which instead requires create azurefirewallsubnet, deploy firewall and configure a default udr next hop.

C:

Deploy Application Gateway WAF_v2 and attach a managed-rule WAF policy is a concrete step for associate an azure application gateway waf policy with a supported gateway sku. Here the selected design is deploy azure firewall in the hub and route spokes through it, which instead requires create azurefirewallsubnet, deploy firewall and configure a default udr next hop.

D:

Configure inspection CA/trust and premium TLS inspection policy where supported is a concrete step for use azure firewall premium tls inspection with appropriate certificates. Here the selected design is deploy azure firewall in the hub and route spokes through it, which instead requires create azurefirewallsubnet, deploy firewall and configure a default udr next hop.

Question 875

A hub-and-spoke network needs central stateful egress inspection across several spoke VNets. After the team applies this change—create AzureFirewallSubnet, deploy Firewall and configure a default UDR next hop—which validation best proves the intended result?

  1. Use IP flow verify to report the denying rule
  2. Inspect WAF log entries and confirm expected custom rule ID
  3. Verify spokes' effective routes and inspect firewall logs for outbound flows
  4. Run a prohibited traffic test and inspect matched rule

Explanation

Correct Answer

C:

Verify spokes' effective routes and inspect firewall logs for outbound flows directly checks whether the intended outcome occurs, not merely whether a resource exists. If the check fails, investigate whether their subnet default route does not point at the firewall.

Incorrect Answers

A:

Use IP flow verify to report the denying rule. This concerns a network administrator adds an allow rule but packets are still blocked by a subnet NSG. Instead, verify spokes' effective routes and inspect firewall logs for outbound flows.

B:

Inspect WAF log entries and confirm expected custom rule ID. This is relevant when an application gateway uses waf policy but test requests never trigger expected custom rules. Instead, verify spokes' effective routes and inspect firewall logs for outbound flows.

D:

Run a prohibited traffic test and inspect matched rule. This concerns denying one destination even though a broader allow exists. Instead, verify spokes' effective routes and inspect firewall logs for outbound flows.

Question 876

A hub-and-spoke network needs central stateful egress inspection across several spoke VNets. During acceptance testing, spoke VMs bypass central egress inspection. Which underlying configuration problem best explains the symptom?

  1. Azure Bastion or its required subnet/access configuration is absent
  2. Their subnet default route does not point at the firewall
  3. Broad default or custom outbound allowance remains effective
  4. Their NICs were not associated with the correct ASG

Explanation

Correct Answer

B:

Their subnet default route does not point at the firewall explains the observed failure: spoke VMs bypass central egress inspection. Correct the design by using deploy Azure Firewall in the hub and route spokes through it, implemented through create AzureFirewallSubnet, deploy Firewall and configure a default UDR next hop.

Incorrect Answers

A:

Azure Bastion or its required subnet/access configuration is absent. This concerns group rdp admin endpoints without assigning public ips to application vms. Here, their subnet default route does not point at the firewall.

C:

Broad default or custom outbound allowance remains effective. This concerns not connect to arbitrary destinations. Here, their subnet default route does not point at the firewall.

D:

Their NICs were not associated with the correct ASG. This concerns being referenced by application role rather than static ip lists in NSG rules. Here, their subnet default route does not point at the firewall.

Question 877

A security team needs application-aware FQDN filtering for outbound HTTP and HTTPS. Which Azure networking design most directly satisfies this requirement?

  1. Create explicit NSG inbound rules with narrow source prefixes and priorities
  2. Set rule collection group and collection priorities in the correct evaluation order
  3. Inspect effective NSG rules on both NIC and subnet with rule priorities
  4. Use Azure Firewall application rules

Explanation

Correct Answer

D:

Use Azure Firewall application rules addresses the topology, access or delivery requirement in the scenario. Apply it by create application rule collection with approved FQDN targets and protocols; confirm by test allowed website access and a blocked unlisted FQDN.

Incorrect Answers

A:

Create explicit NSG inbound rules with narrow source prefixes and priorities. This concerns denying inbound SSH from the internet while permitting approved private management. Instead, use Azure Firewall application rules.

B:

Set rule collection group and collection priorities in the correct evaluation order. This concerns denying one destination even though a broader allow exists. Instead, use Azure Firewall application rules.

C:

Inspect effective NSG rules on both NIC and subnet with rule priorities. This concerns a network administrator adds an allow rule but packets are still blocked by a subnet NSG. Instead, use Azure Firewall application rules.

Question 878

A security team needs application-aware FQDN filtering for outbound HTTP and HTTPS. The architecture uses this design: Use Azure Firewall application rules. Which configuration should the engineer apply to implement it?

  1. Identify the rule ID and add a scoped exception after analysis
  2. Create application rule collection with approved FQDN targets and protocols
  3. Associate each VM NIC with an ASG and reference ASGs in NSG rules
  4. Create AzureFirewallSubnet, deploy Firewall and configure a default UDR next hop

Explanation

Correct Answer

B:

Create application rule collection with approved FQDN targets and protocols is the operational configuration for use azure firewall application rules. The acceptance test is to test allowed website access and a blocked unlisted FQDN.

Incorrect Answers

A:

Identify the rule ID and add a scoped exception after analysis is a concrete step for review waf logs and tune only the specific triggered rule/exclusion. Here the selected design is use azure firewall application rules, which instead requires create application rule collection with approved fqdn targets and protocols.

C:

Associate each VM NIC with an ASG and reference ASGs in NSG rules is a concrete step for use azure application security groups for logical vm grouping. Here the selected design is use azure firewall application rules, which instead requires create application rule collection with approved fqdn targets and protocols.

D:

Create AzureFirewallSubnet, deploy Firewall and configure a default UDR next hop is a concrete step for deploy azure firewall in the hub and route spokes through it. Here the selected design is use azure firewall application rules, which instead requires create application rule collection with approved fqdn targets and protocols.

Question 879

A security team needs application-aware FQDN filtering for outbound HTTP and HTTPS. After the team applies this change—create application rule collection with approved FQDN targets and protocols—which validation best proves the intended result?

  1. Test allowed website access and a blocked unlisted FQDN
  2. Replay false-positive request and a separate malicious test
  3. Verify allowed traffic satisfies both sets of rules
  4. Test an authorized simulation and inspect threat intelligence logs

Explanation

Correct Answer

A:

Test allowed website access and a blocked unlisted FQDN directly checks whether the intended outcome occurs, not merely whether a resource exists. If the check fails, investigate whether application rule allowlisting or rule priority is too permissive.

Incorrect Answers

B:

Replay false-positive request and a separate malicious test. This concerns a waf managed-rule update causes false positives on trusted API inputs. Instead, test allowed website access and a blocked unlisted FQDN.

C:

Verify allowed traffic satisfies both sets of rules. This is relevant when a database vm has separate subnet and nic nsgs and connections behave unexpectedly. Instead, test allowed website access and a blocked unlisted FQDN.

D:

Test an authorized simulation and inspect threat intelligence logs. This concerns mitigate high-risk traffic based on microsoft's current intelligence feeds. Instead, test allowed website access and a blocked unlisted FQDN.

Question 880

A security team needs application-aware FQDN filtering for outbound HTTP and HTTPS. During acceptance testing, unapproved websites remain accessible. Which underlying configuration problem best explains the symptom?

  1. A network security rule or private endpoint network policy blocks the flow
  2. The broad ANY-source port 3389 rule remains enabled
  3. Application rule allowlisting or rule priority is too permissive
  4. A managed rule false positive has not been tuned

Explanation

Correct Answer

C:

Application rule allowlisting or rule priority is too permissive explains the observed failure: unapproved websites remain accessible. Correct the design by using use Azure Firewall application rules, implemented through create application rule collection with approved FQDN targets and protocols.

Incorrect Answers

A:

A network security rule or private endpoint network policy blocks the flow. This is relevant when a team investigates why a vm cannot reach an azure storage private endpoint over port 443. Here, application rule allowlisting or rule priority is too permissive.

B:

The broad ANY-source port 3389 rule remains enabled. This concerns a shared management NSG allows 3389 inbound from every internet address. Here, application rule allowlisting or rule priority is too permissive.

D:

A managed rule false positive has not been tuned. This concerns a waf managed-rule update causes false positives on trusted API inputs. Here, application rule allowlisting or rule priority is too permissive.

Designing and Implementing Microsoft Azure Networking Solutions (AZ-700) Practice Tests

UP

SPECIAL OFFER: GET 10% OFF

This is ONE TIME OFFER

ExamSnap Discount Offer
Enter Your Email Address to Receive Your 10% Off Discount Code

A confirmation link will be sent to this email address to verify your login. *We value your privacy. We will not rent or sell your email address.

Download Free Demo of VCE Exam Simulator

Experience Avanset VCE Exam Simulator for yourself.

Simply submit your e-mail address below to get started with our interactive software demo of your free trial.

Free Demo Limits: In the demo version you will be able to access only first 5 questions from exam.