100% Latest & Updated Microsoft AZ-700 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!
Question 890
A company needs DNS-based threat intelligence and intrusion prevention as part of its central network firewall. The architecture uses this design: Select Azure Firewall Premium for advanced inspection needs. Which configuration should the engineer apply to implement it?
- Select appropriate threat intelligence alert or alert-and-deny mode
- Set WAF policy mode to Detection and enable diagnostics
- Deploy supported Premium SKU and configure required threat inspection policy
- Deploy Bastion in AzureBastionSubnet and remove unnecessary VM public IPs
Explanation
Correct Answer
C:Deploy supported Premium SKU and configure required threat inspection policy is the operational configuration for select azure firewall premium for advanced inspection needs. The acceptance test is to run approved validation traffic and check advanced threat logs.
Incorrect Answers
A:Select appropriate threat intelligence alert or alert-and-deny mode is a concrete step for configure azure firewall threat intelligence filtering settings. Here the selected design is select azure firewall premium for advanced inspection needs, which instead requires deploy supported premium sku and configure required threat inspection policy.
B:Set WAF policy mode to Detection and enable diagnostics is a concrete step for use waf detection mode during tuning. Here the selected design is select azure firewall premium for advanced inspection needs, which instead requires deploy supported premium sku and configure required threat inspection policy.
D:Deploy Bastion in AzureBastionSubnet and remove unnecessary VM public IPs is a concrete step for use azure bastion with tight nsg management controls. Here the selected design is select azure firewall premium for advanced inspection needs, which instead requires deploy supported premium sku and configure required threat inspection policy.
Question 891
A company needs DNS-based threat intelligence and intrusion prevention as part of its central network firewall. After the team applies this change—deploy supported Premium SKU and configure required threat inspection policy—which validation best proves the intended result?
- Run approved validation traffic and check advanced threat logs
- Run IP flow verify and check the first matching security rule
- Attempt external RDP from an unapproved IP and an approved Bastion session
- Change a shared parent rule and check inherited enforcement
Explanation
Correct Answer
A:Run approved validation traffic and check advanced threat logs directly checks whether the intended outcome occurs, not merely whether a resource exists. If the check fails, investigate whether azure Firewall Standard was chosen instead of required Premium.
Incorrect Answers
B:Run IP flow verify and check the first matching security rule. This is relevant when a new NSG rule has a larger numerical priority and unexpectedly loses to another rule. Instead, run approved validation traffic and check advanced threat logs.
C:Attempt external RDP from an unapproved IP and an approved Bastion session. This concerns a shared management NSG allows 3389 inbound from every internet address. Instead, run approved validation traffic and check advanced threat logs.
D:Change a shared parent rule and check inherited enforcement. This concerns shared firewall policy inheritance and administration. Instead, run approved validation traffic and check advanced threat logs.
Question 892
A company needs DNS-based threat intelligence and intrusion prevention as part of its central network firewall. During acceptance testing, requested TLS inspection features are unavailable. Which underlying configuration problem best explains the symptom?
- Static IP allowlists were used instead of service tags
- The replacement NIC lacks the required ASG membership
- Azure Firewall Standard was chosen instead of required Premium
- The NSG blocks the Azure Load Balancer probe source
Explanation
Correct Answer
C:Azure Firewall Standard was chosen instead of required Premium explains the observed failure: requested TLS inspection features are unavailable. Correct the design by using select Azure Firewall Premium for advanced inspection needs, implemented through deploy supported Premium SKU and configure required threat inspection policy.
Incorrect Answers
A:Static IP allowlists were used instead of service tags. This concerns allowing outbound calls to an azure paas service without maintaining ip address lists. The requested service or concept is Azure Firewall Standard was chosen instead of required Premium.
B:The replacement NIC lacks the required ASG membership. This concerns identifying a group of app servers in a single VNet independent of ip churn. The requested service or concept is Azure Firewall Standard was chosen instead of required Premium.
D:The NSG blocks the Azure Load Balancer probe source. This concerns permit traffic from azure load balancer health probes only. The requested service or concept is Azure Firewall Standard was chosen instead of required Premium.
Question 893
A small environment needs baseline network filtering at lowest suitable Azure Firewall tier. Which Azure networking design most directly satisfies this requirement?
- Use Azure Front Door WAF policy and security policy association
- Create the required AzureFirewallSubnet with supported dimensions
- Evaluate Azure Firewall Basic against required workload features
- Enable diagnostic export for Azure Front Door WAF
Explanation
Correct Answer
C:Evaluate Azure Firewall Basic against required workload features addresses the topology, access or delivery requirement in the scenario. Apply it by deploy Basic only when its documented feature and capacity limits satisfy needs; confirm by check enabled capabilities and traffic throughput against accepted scope.
Incorrect Answers
A:Use Azure Front Door WAF policy and security policy association. This concerns wAF filtering at Microsoft's edge network before reaching regional origins. Instead, evaluate Azure Firewall Basic against required workload features.
B:Create the required AzureFirewallSubnet with supported dimensions. This concerns Azure Firewall deployment fails because the hub lacks its reserved platform subnet. Instead, evaluate Azure Firewall Basic against required workload features.
D:Enable diagnostic export for Azure Front Door WAF. This concerns wAF logs centralized for incident review. Instead, evaluate Azure Firewall Basic against required workload features.
Question 894
A small environment needs baseline network filtering at lowest suitable Azure Firewall tier. The architecture uses this design: Evaluate Azure Firewall Basic against required workload features. Which configuration should the engineer apply to implement it?
- Deploy Basic only when its documented feature and capacity limits satisfy needs
- Deploy Bastion in AzureBastionSubnet and remove unnecessary VM public IPs
- Create AzureFirewallSubnet, deploy Firewall and configure a default UDR next hop
- Deploy Application Gateway WAF_v2 and attach a managed-rule WAF policy
Explanation
Correct Answer
A:Deploy Basic only when its documented feature and capacity limits satisfy needs is the operational configuration for evaluate azure firewall basic against required workload features. The acceptance test is to check enabled capabilities and traffic throughput against accepted scope.
Incorrect Answers
B:Deploy Bastion in AzureBastionSubnet and remove unnecessary VM public IPs is a concrete step for use azure bastion with tight nsg management controls. Here the selected design is evaluate azure firewall basic against required workload features, which instead requires deploy basic only when its documented feature and capacity limits satisfy needs.
C:Create AzureFirewallSubnet, deploy Firewall and configure a default UDR next hop is a concrete step for deploy azure firewall in the hub and route spokes through it. Here the selected design is evaluate azure firewall basic against required workload features, which instead requires deploy basic only when its documented feature and capacity limits satisfy needs.
D:Deploy Application Gateway WAF_v2 and attach a managed-rule WAF policy is a concrete step for associate an azure application gateway waf policy with a supported gateway sku. Here the selected design is evaluate azure firewall basic against required workload features, which instead requires deploy basic only when its documented feature and capacity limits satisfy needs.
Question 895
A small environment needs baseline network filtering at lowest suitable Azure Firewall tier. After the team applies this change—deploy Basic only when its documented feature and capacity limits satisfy needs—which validation best proves the intended result?
- Run a prohibited traffic test and inspect matched rule
- Check enabled capabilities and traffic throughput against accepted scope
- Check the effective NSG and confirm authorized service connectivity
- Scale out the web tier and check allowed flows for new ASG members
Explanation
Correct Answer
B:Check enabled capabilities and traffic throughput against accepted scope directly checks whether the intended outcome occurs, not merely whether a resource exists. If the check fails, investigate whether the Basic SKU does not include that advanced feature.
Incorrect Answers
A:Run a prohibited traffic test and inspect matched rule. This concerns denying one destination even though a broader allow exists. Instead, check enabled capabilities and traffic throughput against accepted scope.
C:Check the effective NSG and confirm authorized service connectivity. This concerns allowing outbound calls to an azure paas service without maintaining ip address lists. Instead, check enabled capabilities and traffic throughput against accepted scope.
D:Scale out the web tier and check allowed flows for new ASG members. This concerns being referenced by application role rather than static ip lists in NSG rules. Instead, check enabled capabilities and traffic throughput against accepted scope.
Question 896
A small environment needs baseline network filtering at lowest suitable Azure Firewall tier. During acceptance testing, an advanced inspection policy cannot be applied. Which underlying configuration problem best explains the symptom?
- Front Door security policy does not cover the target domain
- The Basic SKU does not include that advanced feature
- Static IP allowlists were used instead of service tags
- The custom path-match rule is missing or not enabled
Explanation
Correct Answer
B:The Basic SKU does not include that advanced feature explains the observed failure: an advanced inspection policy cannot be applied. Correct the design by using evaluate Azure Firewall Basic against required workload features, implemented through deploy Basic only when its documented feature and capacity limits satisfy needs.
Incorrect Answers
A:Front Door security policy does not cover the target domain. This concerns waf filtering at microsoft's edge network before reaching regional origins. Here, the Basic SKU does not include that advanced feature.
C:Static IP allowlists were used instead of service tags. This concerns allowing outbound calls to an azure paas service without maintaining ip address lists. Here, the Basic SKU does not include that advanced feature.
D:The custom path-match rule is missing or not enabled. This concerns rejecting suspicious request paths before origin processing. Here, the Basic SKU does not include that advanced feature.
Question 897
A multi-subscription organization wants shared firewall policy inheritance and administration. Which Azure networking design most directly satisfies this requirement?
- Enable diagnostic export for Azure Front Door WAF
- Use WAF Prevention mode with reviewed managed rules
- Use Azure Firewall Manager policies with parent-child structure
- Create the required AzureFirewallSubnet with supported dimensions
Explanation
Correct Answer
C:Use Azure Firewall Manager policies with parent-child structure addresses the topology, access or delivery requirement in the scenario. Apply it by create a parent Firewall Policy and associate child policies or firewalls appropriately; confirm by change a shared parent rule and check inherited enforcement.
Incorrect Answers
A:Enable diagnostic export for Azure Front Door WAF. This concerns wAF logs centralized for incident review. Instead, use Azure Firewall Manager policies with parent-child structure.
B:Use WAF Prevention mode with reviewed managed rules. This concerns actively stop known malicious requests. Instead, use Azure Firewall Manager policies with parent-child structure.
D:Create the required AzureFirewallSubnet with supported dimensions. This concerns Azure Firewall deployment fails because the hub lacks its reserved platform subnet. Instead, use Azure Firewall Manager policies with parent-child structure.
Question 898
A multi-subscription organization wants shared firewall policy inheritance and administration. The architecture uses this design: Use Azure Firewall Manager policies with parent-child structure. Which configuration should the engineer apply to implement it?
- Create a parent Firewall Policy and associate child policies or firewalls appropriately
- Configure inspection CA/trust and premium TLS inspection policy where supported
- Set WAF policy mode to Detection and enable diagnostics
- Associate the approved NIC NSG and inspect the target subnet NSG separately
Explanation
Correct Answer
A:Create a parent Firewall Policy and associate child policies or firewalls appropriately is the operational configuration for use azure firewall manager policies with parent-child structure. The acceptance test is to change a shared parent rule and check inherited enforcement.
Incorrect Answers
B:Configure inspection CA/trust and premium TLS inspection policy where supported is a concrete step for use azure firewall premium tls inspection with appropriate certificates. Here the selected design is use azure firewall manager policies with parent-child structure, which instead requires create a parent firewall policy and associate child policies or firewalls appropriately.
C:Set WAF policy mode to Detection and enable diagnostics is a concrete step for use waf detection mode during tuning. Here the selected design is use azure firewall manager policies with parent-child structure, which instead requires create a parent firewall policy and associate child policies or firewalls appropriately.
D:Associate the approved NIC NSG and inspect the target subnet NSG separately is a concrete step for use nic-associated nsg plus validate destination subnet policy. Here the selected design is use azure firewall manager policies with parent-child structure, which instead requires create a parent firewall policy and associate child policies or firewalls appropriately.
Question 899
A multi-subscription organization wants shared firewall policy inheritance and administration. After the team applies this change—create a parent Firewall Policy and associate child policies or firewalls appropriately—which validation best proves the intended result?
- Read the matching rule name and Allow or Deny verdict
- Change a shared parent rule and check inherited enforcement
- Run approved validation traffic and check advanced threat logs
- Query blocked request events by endpoint and rule ID
Explanation
Correct Answer
B:Change a shared parent rule and check inherited enforcement directly checks whether the intended outcome occurs, not merely whether a resource exists. If the check fails, investigate whether its firewall or child policy is not associated with the parent policy.
Incorrect Answers
A:Read the matching rule name and Allow or Deny verdict. This concerns determine which NSG rule blocks a specific vm's outgoing flow. Here, change a shared parent rule and check inherited enforcement.
C:Run approved validation traffic and check advanced threat logs. This concerns DNS-based threat intelligence and intrusion prevention as part of its central network firewall. Here, change a shared parent rule and check inherited enforcement.
D:Query blocked request events by endpoint and rule ID. This concerns waf logs centralized for incident review. Here, change a shared parent rule and check inherited enforcement.
Question 900
A multi-subscription organization wants shared firewall policy inheritance and administration. During acceptance testing, one spoke firewall uses inconsistent baseline controls. Which underlying configuration problem best explains the symptom?
- Its firewall or child policy is not associated with the parent policy
- A network security rule or private endpoint network policy blocks the flow
- WAF events were not correlated with backend health data
- Front Door security policy does not cover the target domain
Explanation
Correct Answer
A:Its firewall or child policy is not associated with the parent policy explains the observed failure: one spoke firewall uses inconsistent baseline controls. Correct the design by using use Azure Firewall Manager policies with parent-child structure, implemented through create a parent Firewall Policy and associate child policies or firewalls appropriately.
Incorrect Answers
B:A network security rule or private endpoint network policy blocks the flow. This is relevant when a team investigates why a vm cannot reach an azure storage private endpoint over port 443. Here, its firewall or child policy is not associated with the parent policy.
C:WAF events were not correlated with backend health data. This concerns distinguishing a waf block from an application gateway backend 502. Here, its firewall or child policy is not associated with the parent policy.
D:Front Door security policy does not cover the target domain. This concerns waf filtering at microsoft's edge network before reaching regional origins. Here, its firewall or child policy is not associated with the parent policy.
Designing and Implementing Microsoft Azure Networking Solutions (AZ-700) Practice Tests