100% Latest & Updated Microsoft AZ-700 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!
Question 910
Azure Firewall deployment fails because the hub lacks its reserved platform subnet. The architecture uses this design: Create the required AzureFirewallSubnet with supported dimensions. Which configuration should the engineer apply to implement it?
- Configure the exact permitted target FQDNs and HTTP/S protocols
- Add the exact reserved subnet name and allowed prefix size in the VNet
- Associate the NSG to the finance subnet and configure a restrictive inbound rule
- Associate the approved NIC NSG and inspect the target subnet NSG separately
Explanation
Correct Answer
B:Add the exact reserved subnet name and allowed prefix size in the VNet is the operational configuration for create the required azurefirewallsubnet with supported dimensions. The acceptance test is to retry firewall deployment and confirm private IP allocation.
Incorrect Answers
A:Configure the exact permitted target FQDNs and HTTP/S protocols is a concrete step for create a scoped azure firewall application rule target fqdn pattern. Here the selected design is create the required azurefirewallsubnet with supported dimensions, which instead requires add the exact reserved subnet name and allowed prefix size in the vnet.
C:Associate the NSG to the finance subnet and configure a restrictive inbound rule is a concrete step for create explicit nsg inbound rules with narrow source prefixes and priorities. Here the selected design is create the required azurefirewallsubnet with supported dimensions, which instead requires add the exact reserved subnet name and allowed prefix size in the vnet.
D:Associate the approved NIC NSG and inspect the target subnet NSG separately is a concrete step for use nic-associated nsg plus validate destination subnet policy. Here the selected design is create the required azurefirewallsubnet with supported dimensions, which instead requires add the exact reserved subnet name and allowed prefix size in the vnet.
Question 911
Azure Firewall deployment fails because the hub lacks its reserved platform subnet. After the team applies this change—add the exact reserved subnet name and allowed prefix size in the VNet—which validation best proves the intended result?
- Run Network Watcher flow checks and a TCP test to the resolved private IP
- Retry firewall deployment and confirm private IP allocation
- Test public SSH denial and approved management access via private network
- Resolve a permitted FQDN via the intended DNS path and inspect firewall logs
Explanation
Correct Answer
B:Retry firewall deployment and confirm private IP allocation directly checks whether the intended outcome occurs, not merely whether a resource exists. If the check fails, investigate whether azureFirewallSubnet name or minimum size is wrong.
Incorrect Answers
A:Run Network Watcher flow checks and a TCP test to the resolved private IP. This is relevant when a team investigates why a vm cannot reach an azure storage private endpoint over port 443. Here, retry firewall deployment and confirm private IP allocation.
C:Test public SSH denial and approved management access via private network. This concerns denying inbound ssh from the internet while permitting approved private management. Here, retry firewall deployment and confirm private IP allocation.
D:Resolve a permitted FQDN via the intended DNS path and inspect firewall logs. This is relevant when a central inspection firewall is deployed but receives no DNS names for fqdn-based policy evaluation. Here, retry firewall deployment and confirm private IP allocation.
Question 912
Azure Firewall deployment fails because the hub lacks its reserved platform subnet. During acceptance testing, the firewall resource cannot provision an internal interface. Which underlying configuration problem best explains the symptom?
- Static IP allowlists were used instead of service tags
- The allow rule's priority is numerically too high
- AzureFirewallSubnet name or minimum size is wrong
- WAF diagnostic settings were never configured
Explanation
Correct Answer
C:AzureFirewallSubnet name or minimum size is wrong explains the observed failure: the firewall resource cannot provision an internal interface. Correct the design by using create the required AzureFirewallSubnet with supported dimensions, implemented through add the exact reserved subnet name and allowed prefix size in the VNet.
Incorrect Answers
A:Static IP allowlists were used instead of service tags. This concerns allowing outbound calls to an azure paas service without maintaining ip address lists. Here, azureFirewallSubnet name or minimum size is wrong.
B:The allow rule's priority is numerically too high. This is relevant when a new NSG rule has a larger numerical priority and unexpectedly loses to another rule. Here, azureFirewallSubnet name or minimum size is wrong.
D:WAF diagnostic settings were never configured. This concerns waf logs centralized for incident review. Here, azureFirewallSubnet name or minimum size is wrong.
Question 913
A firewall policy must deny one destination even though a broader allow exists. Which Azure networking design most directly satisfies this requirement?
- Set rule collection group and collection priorities in the correct evaluation order
- Apply an appropriate Front Door WAF geo-match custom rule
- Install correct forward and return routes for inspected prefixes
- Check policy association and custom rule priority conditions
Explanation
Correct Answer
A:Set rule collection group and collection priorities in the correct evaluation order addresses the topology, access or delivery requirement in the scenario. Apply it by place the targeted deny rule ahead of the broad allow under supported processing order; confirm by run a prohibited traffic test and inspect matched rule.
Incorrect Answers
B:Apply an appropriate Front Door WAF geo-match custom rule. This is relevant when a global API is experiencing repeated unwanted requests from one country. Instead, set rule collection group and collection priorities in the correct evaluation order.
C:Install correct forward and return routes for inspected prefixes. This concerns a hub-and-spoke architecture demands symmetric packet routing through Azure Firewall. Instead, set rule collection group and collection priorities in the correct evaluation order.
D:Check policy association and custom rule priority conditions. This is relevant when an application gateway uses WAF policy but test requests never trigger expected custom rules. Instead, set rule collection group and collection priorities in the correct evaluation order.
Question 914
A firewall policy must deny one destination even though a broader allow exists. The architecture uses this design: Set rule collection group and collection priorities in the correct evaluation order. Which configuration should the engineer apply to implement it?
- Configure inspection CA/trust and premium TLS inspection policy where supported
- Place the targeted deny rule ahead of the broad allow under supported processing order
- Identify the rule ID and add a scoped exception after analysis
- Associate the NSG to the finance subnet and configure a restrictive inbound rule
Explanation
Correct Answer
B:Place the targeted deny rule ahead of the broad allow under supported processing order is the operational configuration for set rule collection group and collection priorities in the correct evaluation order. The acceptance test is to run a prohibited traffic test and inspect matched rule.
Incorrect Answers
A:Configure inspection CA/trust and premium TLS inspection policy where supported is a concrete step for use azure firewall premium tls inspection with appropriate certificates. Here the selected design is set rule collection group and collection priorities in the correct evaluation order, which instead requires place the targeted deny rule ahead of the broad allow under supported processing order.
C:Identify the rule ID and add a scoped exception after analysis is a concrete step for review waf logs and tune only the specific triggered rule/exclusion. Here the selected design is set rule collection group and collection priorities in the correct evaluation order, which instead requires place the targeted deny rule ahead of the broad allow under supported processing order.
D:Associate the NSG to the finance subnet and configure a restrictive inbound rule is a concrete step for create explicit nsg inbound rules with narrow source prefixes and priorities. Here the selected design is set rule collection group and collection priorities in the correct evaluation order, which instead requires place the targeted deny rule ahead of the broad allow under supported processing order.
Question 915
A firewall policy must deny one destination even though a broader allow exists. After the team applies this change—place the targeted deny rule ahead of the broad allow under supported processing order—which validation best proves the intended result?
- Test desired east-west flows and blocked unauthorized connections
- Test public SSH denial and approved management access via private network
- Run a prohibited traffic test and inspect matched rule
- Query example matches from all rule types and correlate timestamps
Explanation
Correct Answer
C:Run a prohibited traffic test and inspect matched rule directly checks whether the intended outcome occurs, not merely whether a resource exists. If the check fails, investigate whether rule priority or type evaluation order permits it first.
Incorrect Answers
A:Test desired east-west flows and blocked unauthorized connections. This concerns occur inside an azure VNet. Instead, run a prohibited traffic test and inspect matched rule.
B:Test public SSH denial and approved management access via private network. This concerns denying inbound ssh from the internet while permitting approved private management. Instead, run a prohibited traffic test and inspect matched rule.
D:Query example matches from all rule types and correlate timestamps. This concerns comparing logs from application, network and dnat firewall rules in one place. Instead, run a prohibited traffic test and inspect matched rule.
Question 916
A firewall policy must deny one destination even though a broader allow exists. During acceptance testing, blocked traffic is accepted by an earlier allow. Which underlying configuration problem best explains the symptom?
- The broad ANY-source port 3389 rule remains enabled
- A managed rule false positive has not been tuned
- The custom path-match rule is missing or not enabled
- Rule priority or type evaluation order permits it first
Explanation
Correct Answer
D:Rule priority or type evaluation order permits it first explains the observed failure: blocked traffic is accepted by an earlier allow. Correct the design by using set rule collection group and collection priorities in the correct evaluation order, implemented through place the targeted deny rule ahead of the broad allow under supported processing order.
Incorrect Answers
A:The broad ANY-source port 3389 rule remains enabled. This concerns a shared management NSG allows 3389 inbound from every internet address. Here, rule priority or type evaluation order permits it first.
B:A managed rule false positive has not been tuned. This concerns a waf managed-rule update causes false positives on trusted API inputs. Here, rule priority or type evaluation order permits it first.
C:The custom path-match rule is missing or not enabled. This concerns rejecting suspicious request paths before origin processing. Here, rule priority or type evaluation order permits it first.
Question 917
A central inspection firewall is deployed but receives no DNS names for FQDN-based policy evaluation. Which Azure networking design most directly satisfies this requirement?
- Create a scoped Azure Firewall application rule target FQDN pattern
- Use supported Azure Firewall DNS settings and DNS proxy where required
- Use NSG subnet-level rules matching the required source and destination
- Use Azure Virtual Network Manager security admin rules
Explanation
Correct Answer
B:Use supported Azure Firewall DNS settings and DNS proxy where required addresses the topology, access or delivery requirement in the scenario. Apply it by configure firewall DNS servers and optionally enable DNS proxy for clients; confirm by resolve a permitted FQDN via the intended DNS path and inspect firewall logs.
Incorrect Answers
A:Create a scoped Azure Firewall application rule target FQDN pattern. This concerns allowing *.example.org without opening all internet domains. Instead, use supported Azure Firewall DNS settings and DNS proxy where required.
C:Use NSG subnet-level rules matching the required source and destination. This concerns restricting east-west traffic from one application tier to another. Instead, use supported Azure Firewall DNS settings and DNS proxy where required.
D:Use Azure Virtual Network Manager security admin rules. This concerns enforcing consistent baseline security controls across many VNets. Instead, use supported Azure Firewall DNS settings and DNS proxy where required.
Question 918
A central inspection firewall is deployed but receives no DNS names for FQDN-based policy evaluation. The architecture uses this design: Use supported Azure Firewall DNS settings and DNS proxy where required. Which configuration should the engineer apply to implement it?
- Enable WAF and access logs then correlate request IDs and response codes
- Associate the NSG to the finance subnet and configure a restrictive inbound rule
- Configure inspection CA/trust and premium TLS inspection policy where supported
- Configure firewall DNS servers and optionally enable DNS proxy for clients
Explanation
Correct Answer
D:Configure firewall DNS servers and optionally enable DNS proxy for clients is the operational configuration for use supported azure firewall dns settings and dns proxy where required. The acceptance test is to resolve a permitted FQDN via the intended DNS path and inspect firewall logs.
Incorrect Answers
A:Enable WAF and access logs then correlate request IDs and response codes is a concrete step for use waf diagnostics alongside gateway access and backend health logs. Here the selected design is use supported azure firewall dns settings and dns proxy where required, which instead requires configure firewall dns servers and optionally enable dns proxy for clients.
B:Associate the NSG to the finance subnet and configure a restrictive inbound rule is a concrete step for create explicit nsg inbound rules with narrow source prefixes and priorities. Here the selected design is use supported azure firewall dns settings and dns proxy where required, which instead requires configure firewall dns servers and optionally enable dns proxy for clients.
C:Configure inspection CA/trust and premium TLS inspection policy where supported is a concrete step for use azure firewall premium tls inspection with appropriate certificates. Here the selected design is use supported azure firewall dns settings and dns proxy where required, which instead requires configure firewall dns servers and optionally enable dns proxy for clients.
Question 919
A central inspection firewall is deployed but receives no DNS names for FQDN-based policy evaluation. After the team applies this change—configure firewall DNS servers and optionally enable DNS proxy for clients—which validation best proves the intended result?
- Inspect WAF log entries and confirm expected custom rule ID
- Send a controlled matching path and validate edge denial
- Resolve a permitted FQDN via the intended DNS path and inspect firewall logs
- Run a prohibited traffic test and inspect matched rule
Explanation
Correct Answer
C:Resolve a permitted FQDN via the intended DNS path and inspect firewall logs directly checks whether the intended outcome occurs, not merely whether a resource exists. If the check fails, investigate whether client DNS bypasses the firewall's configured DNS resolution path.
Incorrect Answers
A:Inspect WAF log entries and confirm expected custom rule ID. This is relevant when an application gateway uses waf policy but test requests never trigger expected custom rules. Instead, resolve a permitted FQDN via the intended DNS path and inspect firewall logs.
B:Send a controlled matching path and validate edge denial. This concerns rejecting suspicious request paths before origin processing. Instead, resolve a permitted FQDN via the intended DNS path and inspect firewall logs.
D:Run a prohibited traffic test and inspect matched rule. This concerns denying one destination even though a broader allow exists. Instead, resolve a permitted FQDN via the intended DNS path and inspect firewall logs.
Question 920
A central inspection firewall is deployed but receives no DNS names for FQDN-based policy evaluation. During acceptance testing, fQDN rules behave inconsistently for clients. Which underlying configuration problem best explains the symptom?
- WAF diagnostic settings were never configured
- The custom path-match rule is missing or not enabled
- The broad ANY-source port 3389 rule remains enabled
- Client DNS bypasses the firewall's configured DNS resolution path
Explanation
Correct Answer
D:Client DNS bypasses the firewall's configured DNS resolution path explains the observed failure: fQDN rules behave inconsistently for clients. Correct the design by using use supported Azure Firewall DNS settings and DNS proxy where required, implemented through configure firewall DNS servers and optionally enable DNS proxy for clients.
Incorrect Answers
A:WAF diagnostic settings were never configured. This concerns waf logs centralized for incident review. Here, client DNS bypasses the firewall's configured DNS resolution path.
B:The custom path-match rule is missing or not enabled. This concerns rejecting suspicious request paths before origin processing. Here, client DNS bypasses the firewall's configured DNS resolution path.
C:The broad ANY-source port 3389 rule remains enabled. This concerns a shared management NSG allows 3389 inbound from every internet address. Here, client DNS bypasses the firewall's configured DNS resolution path.
Designing and Implementing Microsoft Azure Networking Solutions (AZ-700) Practice Tests