100% Latest & Updated Microsoft AZ-700 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!
Question 940
A workload uses HTTPS and requires inspection of application-layer content inside TLS at the central hub. During acceptance testing, tLS interception breaks client trust or is not performed. Which underlying configuration problem best explains the symptom?
- Front Door security policy does not cover the target domain
- NSG rules do not constrain the traffic by destination port
- The inspection certificate chain or Premium settings are incomplete
- WAF diagnostic settings were never configured
Explanation
Correct Answer
C:The inspection certificate chain or Premium settings are incomplete explains the observed failure: tLS interception breaks client trust or is not performed. Correct the design by using use Azure Firewall Premium TLS inspection with appropriate certificates, implemented through configure inspection CA/trust and premium TLS inspection policy where supported.
Incorrect Answers
A:Front Door security policy does not cover the target domain. This concerns waf filtering at microsoft's edge network before reaching regional origins. Here, the inspection certificate chain or Premium settings are incomplete.
B:NSG rules do not constrain the traffic by destination port. This concerns restricting east-west traffic from one application tier to another. Here, the inspection certificate chain or Premium settings are incomplete.
D:WAF diagnostic settings were never configured. This concerns waf logs centralized for incident review. Here, the inspection certificate chain or Premium settings are incomplete.
Question 941
A central network team wants to compare logs from application, network and DNAT Firewall rules in one place. Which Azure networking design most directly satisfies this requirement?
- Enable diagnostic logs to Log Analytics and query matching rule activity
- Send Azure Firewall diagnostics to an approved Log Analytics workspace
- Use Azure Virtual Network Manager security admin rules
- Associate an Azure Application Gateway WAF policy with a supported gateway SKU
Explanation
Correct Answer
B:Send Azure Firewall diagnostics to an approved Log Analytics workspace addresses the topology, access or delivery requirement in the scenario. Apply it by configure diagnostic categories and resource-specific tables as applicable; confirm by query example matches from all rule types and correlate timestamps.
Incorrect Answers
A:Enable diagnostic logs to Log Analytics and query matching rule activity. This concerns seeing whether Azure Firewall dropped a specific connection. Instead, send Azure Firewall diagnostics to an approved Log Analytics workspace.
C:Use Azure Virtual Network Manager security admin rules. This concerns enforcing consistent baseline security controls across many VNets. Instead, send Azure Firewall diagnostics to an approved Log Analytics workspace.
D:Associate an Azure Application Gateway WAF policy with a supported gateway SKU. This concerns protection against OWASP web exploits. Instead, send Azure Firewall diagnostics to an approved Log Analytics workspace.
Question 942
A central network team wants to compare logs from application, network and DNAT Firewall rules in one place. The architecture uses this design: Send Azure Firewall diagnostics to an approved Log Analytics workspace. Which configuration should the engineer apply to implement it?
- Configure diagnostic categories and resource-specific tables as applicable
- Associate the NSG to the finance subnet and configure a restrictive inbound rule
- Enter the NIC, destination, port and outbound direction in the diagnostic
- Configure the exact permitted target FQDNs and HTTP/S protocols
Explanation
Correct Answer
A:Configure diagnostic categories and resource-specific tables as applicable is the operational configuration for send azure firewall diagnostics to an approved log analytics workspace. The acceptance test is to query example matches from all rule types and correlate timestamps.
Incorrect Answers
B:Associate the NSG to the finance subnet and configure a restrictive inbound rule is a concrete step for create explicit nsg inbound rules with narrow source prefixes and priorities. Here the selected design is send azure firewall diagnostics to an approved log analytics workspace, which instead requires configure diagnostic categories and resource-specific tables as applicable.
C:Enter the NIC, destination, port and outbound direction in the diagnostic is a concrete step for use network watcher ip flow verify for the precise five-tuple. Here the selected design is send azure firewall diagnostics to an approved log analytics workspace, which instead requires configure diagnostic categories and resource-specific tables as applicable.
D:Configure the exact permitted target FQDNs and HTTP/S protocols is a concrete step for create a scoped azure firewall application rule target fqdn pattern. Here the selected design is send azure firewall diagnostics to an approved log analytics workspace, which instead requires configure diagnostic categories and resource-specific tables as applicable.
Question 943
A central network team wants to compare logs from application, network and DNAT Firewall rules in one place. After the team applies this change—configure diagnostic categories and resource-specific tables as applicable—which validation best proves the intended result?
- Inspect WAF log entries and confirm expected custom rule ID
- Query example matches from all rule types and correlate timestamps
- Compare requests from approved and disallowed geographies
- Run a prohibited traffic test and inspect matched rule
Explanation
Correct Answer
B:Query example matches from all rule types and correlate timestamps directly checks whether the intended outcome occurs, not merely whether a resource exists. If the check fails, investigate whether relevant Firewall diagnostic categories were not enabled.
Incorrect Answers
A:Inspect WAF log entries and confirm expected custom rule ID. This is relevant when an application gateway uses waf policy but test requests never trigger expected custom rules. Instead, query example matches from all rule types and correlate timestamps.
C:Compare requests from approved and disallowed geographies. This is relevant when a global API is experiencing repeated unwanted requests from one country. Instead, query example matches from all rule types and correlate timestamps.
D:Run a prohibited traffic test and inspect matched rule. This concerns denying one destination even though a broader allow exists. Instead, query example matches from all rule types and correlate timestamps.
Question 944
A central network team wants to compare logs from application, network and DNAT Firewall rules in one place. During acceptance testing, only application rule logs exist during incident review. Which underlying configuration problem best explains the symptom?
- Static IP allowlists were used instead of service tags
- Flow direction or traffic disposition fields were interpreted incorrectly
- Relevant Firewall diagnostic categories were not enabled
- The broad ANY-source port 3389 rule remains enabled
Explanation
Correct Answer
C:Relevant Firewall diagnostic categories were not enabled explains the observed failure: only application rule logs exist during incident review. Correct the design by using send Azure Firewall diagnostics to an approved Log Analytics workspace, implemented through configure diagnostic categories and resource-specific tables as applicable.
Incorrect Answers
A:Static IP allowlists were used instead of service tags. This concerns allowing outbound calls to an azure paas service without maintaining ip address lists. Here, relevant Firewall diagnostic categories were not enabled.
B:Flow direction or traffic disposition fields were interpreted incorrectly. This concerns identifying which connection was rejected. Here, relevant Firewall diagnostic categories were not enabled.
D:The broad ANY-source port 3389 rule remains enabled. This concerns a shared management NSG allows 3389 inbound from every internet address. Here, relevant Firewall diagnostic categories were not enabled.
Question 945
An internet-facing regional application needs protection against OWASP web exploits. Which Azure networking design most directly satisfies this requirement?
- Scope the WAF security policy to designated Front Door domains
- Send Azure Firewall diagnostics to an approved Log Analytics workspace
- Associate an Azure Application Gateway WAF policy with a supported gateway SKU
- Configure Azure Firewall threat intelligence filtering settings
Explanation
Correct Answer
C:Associate an Azure Application Gateway WAF policy with a supported gateway SKU addresses the topology, access or delivery requirement in the scenario. Apply it by deploy Application Gateway WAF_v2 and attach a managed-rule WAF policy; confirm by send a permitted request and controlled malicious pattern; inspect WAF logs.
Incorrect Answers
A:Scope the WAF security policy to designated Front Door domains. This concerns Azure Front Door WAF attached to only one sensitive hostname. Here, associate an Azure Application Gateway WAF policy with a supported gateway SKU.
B:Send Azure Firewall diagnostics to an approved Log Analytics workspace. This concerns comparing logs from application, network and DNAT Firewall rules in one place. Here, associate an Azure Application Gateway WAF policy with a supported gateway SKU.
D:Configure Azure Firewall threat intelligence filtering settings. This concerns mitigate high-risk traffic based on Microsoft's current intelligence feeds. Here, associate an Azure Application Gateway WAF policy with a supported gateway SKU.
Question 946
An internet-facing regional application needs protection against OWASP web exploits. The architecture uses this design: Associate an Azure Application Gateway WAF policy with a supported gateway SKU. Which configuration should the engineer apply to implement it?
- Set exclusion scope and match variables on relevant managed rules
- Associate the NSG to the finance subnet and configure a restrictive inbound rule
- Create AzureFirewallSubnet, deploy Firewall and configure a default UDR next hop
- Deploy Application Gateway WAF_v2 and attach a managed-rule WAF policy
Explanation
Correct Answer
D:Deploy Application Gateway WAF_v2 and attach a managed-rule WAF policy is the operational configuration for associate an azure application gateway waf policy with a supported gateway sku. The acceptance test is to send a permitted request and controlled malicious pattern; inspect WAF logs.
Incorrect Answers
A:Set exclusion scope and match variables on relevant managed rules is a concrete step for configure a narrowly scoped waf exclusion for the matching field. Here the selected design is associate an azure application gateway waf policy with a supported gateway sku, which instead requires deploy application gateway waf_v2 and attach a managed-rule waf policy.
B:Associate the NSG to the finance subnet and configure a restrictive inbound rule is a concrete step for create explicit nsg inbound rules with narrow source prefixes and priorities. Here the selected design is associate an azure application gateway waf policy with a supported gateway sku, which instead requires deploy application gateway waf_v2 and attach a managed-rule waf policy.
C:Create AzureFirewallSubnet, deploy Firewall and configure a default UDR next hop is a concrete step for deploy azure firewall in the hub and route spokes through it. Here the selected design is associate an azure application gateway waf policy with a supported gateway sku, which instead requires deploy application gateway waf_v2 and attach a managed-rule waf policy.
Question 947
An internet-facing regional application needs protection against OWASP web exploits. After the team applies this change—deploy Application Gateway WAF_v2 and attach a managed-rule WAF policy—which validation best proves the intended result?
- Run a prohibited traffic test and inspect matched rule
- Send a permitted request and controlled malicious pattern; inspect WAF logs
- Search logs for the source, destination and rule action
- Test representative POST payloads and malicious input
Explanation
Correct Answer
B:Send a permitted request and controlled malicious pattern; inspect WAF logs directly checks whether the intended outcome occurs, not merely whether a resource exists. If the check fails, investigate whether wAF was not enabled or its policy was not associated.
Incorrect Answers
A:Run a prohibited traffic test and inspect matched rule. This concerns denying one destination even though a broader allow exists. Instead, send a permitted request and controlled malicious pattern; inspect WAF logs.
C:Search logs for the source, destination and rule action. This concerns seeing whether azure firewall dropped a specific connection. Instead, send a permitted request and controlled malicious pattern; inspect WAF logs.
D:Test representative POST payloads and malicious input. This is relevant when a regional waf blocks legitimate post requests because request body parsing is too strict. Instead, send a permitted request and controlled malicious pattern; inspect WAF logs.
Question 948
An internet-facing regional application needs protection against OWASP web exploits. During acceptance testing, the web gateway serves requests but never evaluates WAF rules. Which underlying configuration problem best explains the symptom?
- A network security rule or private endpoint network policy blocks the flow
- Relevant Firewall diagnostic categories were not enabled
- WAF was not enabled or its policy was not associated
- The broad ANY-source port 3389 rule remains enabled
Explanation
Correct Answer
C:WAF was not enabled or its policy was not associated explains the observed failure: the web gateway serves requests but never evaluates WAF rules. Correct the design by using associate an Azure Application Gateway WAF policy with a supported gateway SKU, implemented through deploy Application Gateway WAF_v2 and attach a managed-rule WAF policy.
Incorrect Answers
A:A network security rule or private endpoint network policy blocks the flow. This is relevant when a team investigates why a vm cannot reach an azure storage private endpoint over port 443. The relevant SQL or system operation is WAF was not enabled or its policy was not associated.
B:Relevant Firewall diagnostic categories were not enabled. This concerns comparing logs from application, network and dnat firewall rules in one place. The relevant SQL or system operation is WAF was not enabled or its policy was not associated.
D:The broad ANY-source port 3389 rule remains enabled. This concerns a shared management NSG allows 3389 inbound from every internet address. The relevant SQL or system operation is WAF was not enabled or its policy was not associated.
Question 949
A global retail site needs WAF filtering at Microsoft's edge network before reaching regional origins. Which Azure networking design most directly satisfies this requirement?
- Use Azure Front Door WAF policy and security policy association
- Use WAF Detection mode during tuning
- Use Azure Firewall Manager policies with parent-child structure
- Configure Azure Firewall DNAT rules for approved inbound traffic
Explanation
Correct Answer
A:Use Azure Front Door WAF policy and security policy association addresses the topology, access or delivery requirement in the scenario. Apply it by create WAF policy and attach it to relevant Front Door domains/endpoints; confirm by inspect edge WAF logs for a safe and blocked request.
Incorrect Answers
B:Use WAF Detection mode during tuning. This concerns log would-be blocks without disrupting customer traffic. Instead, use Azure Front Door WAF policy and security policy association.
C:Use Azure Firewall Manager policies with parent-child structure. This concerns shared firewall policy inheritance and administration. Instead, use Azure Front Door WAF policy and security policy association.
D:Configure Azure Firewall DNAT rules for approved inbound traffic. This concerns inbound access through a fixed public IP. Instead, use Azure Front Door WAF policy and security policy association.
Question 950
A global retail site needs WAF filtering at Microsoft's edge network before reaching regional origins. The architecture uses this design: Use Azure Front Door WAF policy and security policy association. Which configuration should the engineer apply to implement it?
- Configure inspection CA/trust and premium TLS inspection policy where supported
- Assign NIC IP configurations to the ASG and create NSG rules targeting that ASG
- Create WAF policy and attach it to relevant Front Door domains/endpoints
- Set policy mode to Prevention and tune required exclusions
Explanation
Correct Answer
C:Create WAF policy and attach it to relevant Front Door domains/endpoints is the operational configuration for use azure front door waf policy and security policy association. The acceptance test is to inspect edge WAF logs for a safe and blocked request.
Incorrect Answers
A:Configure inspection CA/trust and premium TLS inspection policy where supported is a concrete step for use azure firewall premium tls inspection with appropriate certificates. Here the selected design is use azure front door waf policy and security policy association, which instead requires create waf policy and attach it to relevant front door domains/endpoints.
B:Assign NIC IP configurations to the ASG and create NSG rules targeting that ASG is a concrete step for reference an application security group in network security rules. Here the selected design is use azure front door waf policy and security policy association, which instead requires create waf policy and attach it to relevant front door domains/endpoints.
D:Set policy mode to Prevention and tune required exclusions is a concrete step for use waf prevention mode with reviewed managed rules. Here the selected design is use azure front door waf policy and security policy association, which instead requires create waf policy and attach it to relevant front door domains/endpoints.
Designing and Implementing Microsoft Azure Networking Solutions (AZ-700) Practice Tests