100% Latest & Updated Microsoft AZ-700 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!
Question 950
A global retail site needs WAF filtering at Microsoft's edge network before reaching regional origins. The architecture uses this design: Use Azure Front Door WAF policy and security policy association. Which configuration should the engineer apply to implement it?
- Configure inspection CA/trust and premium TLS inspection policy where supported
- Assign NIC IP configurations to the ASG and create NSG rules targeting that ASG
- Create WAF policy and attach it to relevant Front Door domains/endpoints
- Set policy mode to Prevention and tune required exclusions
Explanation
Correct Answer
C:Create WAF policy and attach it to relevant Front Door domains/endpoints is the operational configuration for use azure front door waf policy and security policy association. The acceptance test is to inspect edge WAF logs for a safe and blocked request.
Incorrect Answers
A:Configure inspection CA/trust and premium TLS inspection policy where supported is a concrete step for use azure firewall premium tls inspection with appropriate certificates. Here the selected design is use azure front door waf policy and security policy association, which instead requires create waf policy and attach it to relevant front door domains/endpoints.
B:Assign NIC IP configurations to the ASG and create NSG rules targeting that ASG is a concrete step for reference an application security group in network security rules. Here the selected design is use azure front door waf policy and security policy association, which instead requires create waf policy and attach it to relevant front door domains/endpoints.
D:Set policy mode to Prevention and tune required exclusions is a concrete step for use waf prevention mode with reviewed managed rules. Here the selected design is use azure front door waf policy and security policy association, which instead requires create waf policy and attach it to relevant front door domains/endpoints.
Question 951
A global retail site needs WAF filtering at Microsoft's edge network before reaching regional origins. After the team applies this change—create WAF policy and attach it to relevant Front Door domains/endpoints—which validation best proves the intended result?
- Inspect edge WAF logs for a safe and blocked request
- Inspect effective security rules and verify enforced org-wide policy
- Send a controlled matching path and validate edge denial
- Test desired east-west flows and blocked unauthorized connections
Explanation
Correct Answer
A:Inspect edge WAF logs for a safe and blocked request directly checks whether the intended outcome occurs, not merely whether a resource exists. If the check fails, investigate whether front Door security policy does not cover the target domain.
Incorrect Answers
B:Inspect effective security rules and verify enforced org-wide policy. This concerns enforcing consistent baseline security controls across many vnets. Instead, inspect edge WAF logs for a safe and blocked request.
C:Send a controlled matching path and validate edge denial. This concerns rejecting suspicious request paths before origin processing. Instead, inspect edge WAF logs for a safe and blocked request.
D:Test desired east-west flows and blocked unauthorized connections. This concerns occur inside an azure VNet. Instead, inspect edge WAF logs for a safe and blocked request.
Question 952
A global retail site needs WAF filtering at Microsoft's edge network before reaching regional origins. During acceptance testing, an attack reaches origins without a WAF decision. Which underlying configuration problem best explains the symptom?
- The Basic SKU does not include that advanced feature
- Its firewall or child policy is not associated with the parent policy
- The regional firewall has not been linked to updated policy
- Front Door security policy does not cover the target domain
Explanation
Correct Answer
D:Front Door security policy does not cover the target domain explains the observed failure: an attack reaches origins without a WAF decision. Correct the design by using use Azure Front Door WAF policy and security policy association, implemented through create WAF policy and attach it to relevant Front Door domains/endpoints.
Incorrect Answers
A:The Basic SKU does not include that advanced feature. This concerns baseline network filtering at lowest suitable azure firewall tier. Here, front Door security policy does not cover the target domain.
B:Its firewall or child policy is not associated with the parent policy. This concerns shared firewall policy inheritance and administration. Here, front Door security policy does not cover the target domain.
C:The regional firewall has not been linked to updated policy. This concerns updating firewall rule collections across many regional deployments. Here, front Door security policy does not cover the target domain.
Question 953
A WAF policy is being evaluated and the team needs to log would-be blocks without disrupting customer traffic. Which Azure networking design most directly satisfies this requirement?
- Apply NSG controls at the appropriate subnet or NIC boundary
- Use WAF Prevention mode with reviewed managed rules
- Use WAF Detection mode during tuning
- Use Network Watcher IP flow verify for the precise five-tuple
Explanation
Correct Answer
C:Use WAF Detection mode during tuning addresses the topology, access or delivery requirement in the scenario. Apply it by set WAF policy mode to Detection and enable diagnostics; confirm by confirm malicious test requests are logged but not blocked.
Incorrect Answers
A:Apply NSG controls at the appropriate subnet or NIC boundary. This concerns occur inside an Azure VNet. Instead, use WAF Detection mode during tuning.
B:Use WAF Prevention mode with reviewed managed rules. This concerns actively stop known malicious requests. Instead, use WAF Detection mode during tuning.
D:Use Network Watcher IP flow verify for the precise five-tuple. This concerns determine which NSG rule blocks a specific VM's outgoing flow. Instead, use WAF Detection mode during tuning.
Question 954
A WAF policy is being evaluated and the team needs to log would-be blocks without disrupting customer traffic. The architecture uses this design: Use WAF Detection mode during tuning. Which configuration should the engineer apply to implement it?
- Deploy supported Premium SKU and configure required threat inspection policy
- Set WAF policy mode to Detection and enable diagnostics
- Configure supported request URI conditions with Block action in prevention mode
- Create a parent Firewall Policy and associate child policies or firewalls appropriately
Explanation
Correct Answer
B:Set WAF policy mode to Detection and enable diagnostics is the operational configuration for use waf detection mode during tuning. The acceptance test is to confirm malicious test requests are logged but not blocked.
Incorrect Answers
A:Deploy supported Premium SKU and configure required threat inspection policy is a concrete step for select azure firewall premium for advanced inspection needs. Here the selected design is use waf detection mode during tuning, which instead requires set waf policy mode to detection and enable diagnostics.
C:Configure supported request URI conditions with Block action in prevention mode is a concrete step for create a front door custom waf match rule on url path. Here the selected design is use waf detection mode during tuning, which instead requires set waf policy mode to detection and enable diagnostics.
D:Create a parent Firewall Policy and associate child policies or firewalls appropriately is a concrete step for use azure firewall manager policies with parent-child structure. Here the selected design is use waf detection mode during tuning, which instead requires set waf policy mode to detection and enable diagnostics.
Question 955
A WAF policy is being evaluated and the team needs to log would-be blocks without disrupting customer traffic. After the team applies this change—set WAF policy mode to Detection and enable diagnostics—which validation best proves the intended result?
- Send a permitted request and controlled malicious pattern; inspect WAF logs
- Confirm malicious test requests are logged but not blocked
- Find the specific denied five-tuple and explain its logged disposition
- Test public SSH denial and approved management access via private network
Explanation
Correct Answer
B:Confirm malicious test requests are logged but not blocked directly checks whether the intended outcome occurs, not merely whether a resource exists. If the check fails, investigate whether the WAF policy is in Prevention mode.
Incorrect Answers
A:Send a permitted request and controlled malicious pattern; inspect WAF logs. This concerns protection against owasp web exploits. Instead, confirm malicious test requests are logged but not blocked.
C:Find the specific denied five-tuple and explain its logged disposition. This concerns identifying which connection was rejected. Instead, confirm malicious test requests are logged but not blocked.
D:Test public SSH denial and approved management access via private network. This concerns denying inbound ssh from the internet while permitting approved private management. Instead, confirm malicious test requests are logged but not blocked.
Question 956
A WAF policy is being evaluated and the team needs to log would-be blocks without disrupting customer traffic. During acceptance testing, test traffic is blocked during a detection-only exercise. Which underlying configuration problem best explains the symptom?
- A network security rule or private endpoint network policy blocks the flow
- Threat intelligence mode remains Alert instead of Alert and deny
- The WAF policy is in Prevention mode
- The regional firewall has not been linked to updated policy
Explanation
Correct Answer
C:The WAF policy is in Prevention mode explains the observed failure: test traffic is blocked during a detection-only exercise. Correct the design by using use WAF Detection mode during tuning, implemented through set WAF policy mode to Detection and enable diagnostics.
Incorrect Answers
A:A network security rule or private endpoint network policy blocks the flow. This is relevant when a team investigates why a vm cannot reach an azure storage private endpoint over port 443. Here, the WAF policy is in Prevention mode.
B:Threat intelligence mode remains Alert instead of Alert and deny. This concerns mitigate high-risk traffic based on microsoft's current intelligence feeds. Here, the WAF policy is in Prevention mode.
D:The regional firewall has not been linked to updated policy. This concerns updating firewall rule collections across many regional deployments. Here, the WAF policy is in Prevention mode.
Question 957
A mature WAF policy should actively stop known malicious requests. Which Azure networking design most directly satisfies this requirement?
- Use WAF Prevention mode with reviewed managed rules
- Associate an Azure Application Gateway WAF policy with a supported gateway SKU
- Configure Azure Firewall DNAT rules for approved inbound traffic
- Use Azure Firewall network rules rather than HTTP application rules
Explanation
Correct Answer
A:Use WAF Prevention mode with reviewed managed rules addresses the topology, access or delivery requirement in the scenario. Apply it by set policy mode to Prevention and tune required exclusions; confirm by send a controlled malicious request and validate a blocked action.
Incorrect Answers
B:Associate an Azure Application Gateway WAF policy with a supported gateway SKU. This concerns protection against OWASP web exploits. Instead, use WAF Prevention mode with reviewed managed rules.
C:Configure Azure Firewall DNAT rules for approved inbound traffic. This concerns inbound access through a fixed public IP. Instead, use WAF Prevention mode with reviewed managed rules.
D:Use Azure Firewall network rules rather than HTTP application rules. This concerns filtering non-HTTP TCP traffic by IP, protocol and destination port. Instead, use WAF Prevention mode with reviewed managed rules.
Question 958
A mature WAF policy should actively stop known malicious requests. The architecture uses this design: Use WAF Prevention mode with reviewed managed rules. Which configuration should the engineer apply to implement it?
- Create a geo-filter custom rule associated with the API security policy
- Select appropriate threat intelligence alert or alert-and-deny mode
- Define versioned Firewall Policy rules and associate each regional firewall
- Set policy mode to Prevention and tune required exclusions
Explanation
Correct Answer
D:Set policy mode to Prevention and tune required exclusions is the operational configuration for use waf prevention mode with reviewed managed rules. The acceptance test is to send a controlled malicious request and validate a blocked action.
Incorrect Answers
A:Create a geo-filter custom rule associated with the API security policy is a concrete step for apply an appropriate front door waf geo-match custom rule. Here the selected design is use waf prevention mode with reviewed managed rules, which instead requires set policy mode to prevention and tune required exclusions.
B:Select appropriate threat intelligence alert or alert-and-deny mode is a concrete step for configure azure firewall threat intelligence filtering settings. Here the selected design is use waf prevention mode with reviewed managed rules, which instead requires set policy mode to prevention and tune required exclusions.
C:Define versioned Firewall Policy rules and associate each regional firewall is a concrete step for manage centrally attached azure firewall policies. Here the selected design is use waf prevention mode with reviewed managed rules, which instead requires set policy mode to prevention and tune required exclusions.
Question 959
A mature WAF policy should actively stop known malicious requests. After the team applies this change—set policy mode to Prevention and tune required exclusions—which validation best proves the intended result?
- Search logs for the source, destination and rule action
- Generate a controlled burst and confirm rate-limit decisions
- Send a controlled malicious request and validate a blocked action
- Test allowed website access and a blocked unlisted FQDN
Explanation
Correct Answer
C:Send a controlled malicious request and validate a blocked action directly checks whether the intended outcome occurs, not merely whether a resource exists. If the check fails, investigate whether wAF policy is still in Detection mode.
Incorrect Answers
A:Search logs for the source, destination and rule action. This concerns seeing whether azure firewall dropped a specific connection. Instead, send a controlled malicious request and validate a blocked action.
B:Generate a controlled burst and confirm rate-limit decisions. This concerns an emergency rule to reduce high request rate from a single source. Instead, send a controlled malicious request and validate a blocked action.
D:Test allowed website access and a blocked unlisted FQDN. This concerns application-aware fqdn filtering for outbound http and HTTPS. Instead, send a controlled malicious request and validate a blocked action.
Question 960
A mature WAF policy should actively stop known malicious requests. During acceptance testing, malicious patterns generate logs but remain allowed. Which underlying configuration problem best explains the symptom?
- Threat intelligence mode remains Alert instead of Alert and deny
- WAF policy is still in Detection mode
- A network security rule or private endpoint network policy blocks the flow
- The regional firewall has not been linked to updated policy
Explanation
Correct Answer
B:WAF policy is still in Detection mode explains the observed failure: malicious patterns generate logs but remain allowed. Correct the design by using use WAF Prevention mode with reviewed managed rules, implemented through set policy mode to Prevention and tune required exclusions.
Incorrect Answers
A:Threat intelligence mode remains Alert instead of Alert and deny. This concerns mitigate high-risk traffic based on microsoft's current intelligence feeds. The relevant SQL or system operation is WAF policy is still in Detection mode.
C:A network security rule or private endpoint network policy blocks the flow. This is relevant when a team investigates why a vm cannot reach an azure storage private endpoint over port 443. The relevant SQL or system operation is WAF policy is still in Detection mode.
D:The regional firewall has not been linked to updated policy. This concerns updating firewall rule collections across many regional deployments. The relevant SQL or system operation is WAF policy is still in Detection mode.
Designing and Implementing Microsoft Azure Networking Solutions (AZ-700) Practice Tests